Spectroscopic determination of leaf morphological and biochemical traits for northern temperate and boreal tree species

Application of ATR-Fourier transform infrared spectroscopy in fast and simultaneous determination of leaf chemical and functional properties of forest herb species

ATR-Fourier transform infrared spectroscopy was used to determine the carbon and nitrogen content in the leaves of herbaceous forest plant species and functional traits associated with the leaf economic spectrum (one of the two-dimensional global spectrum of plant form and function), and monitoring plant physiological status under elevated temperature conditions. The content of carbon and nitrogen determined by traditional methods validated the accuracy of ATR-FTIR method. It was also shown that in the case of forest herbs, the ATR-FTIR method is an efficient tool for determining functional traits (such as specific leaf area (SLA) and leaf dry matter content (LDMC)) related to the leaf economics spectrum, and to diagnose the photophysiological state of plants after changes of temperature (changes of day/night temperature from 21/13 °C to 25/17 °C). Measuring the areas of three absorption bands of the ATR-FTIR spectra related to amides I and II (between 1700 cm-1 and 1500 cm-1), carbohydrates (cellulose and hemicellulose; between 1200 cm-1 - 850 cm-1) and amide III (between 1290 cm-1 and 1190 cm-1) allowed for determination of all analysed chemical and functional properties of leaves. Based on selected absorption bands accurately estimated C and N content, with coefficients of correlation (r) of 0.88 for C and 0.84 for N. SLA and LDMC were also predicted, with r values of 0.88 and -0.91, respectively. Moreover, ATR-FTIR proved to be a rapid, non-destructive tool for monitoring the plant physiological status, as demonstrated by the significant correlation (r = 0.99) between the chlorophyll fluorescence performance index (PI) and ATR-FTIR data. ATR-FTIR has been demonstrated as an efficient tool for simultaneous quantification of leaf carbon and nitrogen content, economic functional traits, and physiological status of forest herb plants.

Capturing seasonal variations in faecal nutrient content from tundra herbivores using near infrared reflectance spectroscopy

Herbivores contribute to nutrient cycling in tundra ecosystems through their waste (e.g., faeces, urine). However, their contribution might vary among species and over time during the growing season likely due to differences in body size, digestive physiology, and variations in diet composition and quality. Capturing fine-scale variability requires intensive sampling, but traditional wet-lab methods for measuring nutrient concentration and stoichiometry in animal faeces are prohibitively expensive. To address this challenge, we developed a low-cost alternative using Near-Infrared Reflectance Spectroscopy (NIRS). We calibrated a general model for the main Icelandic tundra herbivores (i.e., pink-footed goose, Anser brachyrynchus, reindeer, Rangifer tarandus and sheep, Ovis aries) to assess faecal nutrient concentrations (nitrogen, phosphorus, and carbon) and stoichiometry (C:N, C:P, N:P). This was achieved using a set of 191 fresh faecal samples scanned with NIRS and analysed by traditional wet-lab methods. The multispecies models explained between 76 and 91 % of variation between samples. We then applied the models to over 300 samples and assessed changes in faecal nutrient concentration, and stoichiometry of the three herbivores throughout the growing season.We found that faecal quality varied between herbivore species, with sheep and reindeer generally having more similar nutrient concentrations and stoichiometry than geese. Seasonality also affected faecal nutrient content, with a general decrease in N and P concentrations over the growing season and an increase in C:N and C:P ratios, especially in geese. Geese contributed disproportionately to the nutrient pools of Icelandic rangelands due to their high defecation rate and large population. These results provide important insights into how different herbivore species can influence the biogeochemistry of nutrient-limited tundra rangelands throughout the growing season, and a general model for faecal nutrient content of tundra herbivores.

Deciphering the variability of leaf phosphorus-allocation strategies using leaf economic traits and reflectance spectroscopy across diverse forest types

Allocation of leaf phosphorus (P) among different functional fractions represents a crucial adaptive strategy for optimizing P use. However, it remains challenging to monitor the variability in leaf P fractions and, ultimately, to understand P-use strategies across diverse plant communities. We explored relationships between five leaf P fractions (orthophosphate P, Pi; lipid P, PL; nucleic acid P, PN; metabolite P, PM; and residual P, PR) and 11 leaf economic traits of 58 woody species from three biomes in China, including temperate, subtropical and tropical forests. Then, we developed trait-based models and spectral models for leaf P fractions and compared their predictive abilities. We found that plants exhibiting conservative strategies increased the proportions of PN and PM, but decreased the proportions of Pi and PL, thus enhancing photosynthetic P-use efficiency, especially under P limitation. Spectral models outperformed trait-based models in predicting cross-site leaf P fractions, regardless of concentrations (R2 = 0.50-0.88 vs 0.34-0.74) or proportions (R2 = 0.43-0.70 vs 0.06-0.45). These findings enhance our understanding of leaf P-allocation strategies and highlight reflectance spectroscopy as a promising alternative for characterizing large-scale leaf P fractions and plant P-use strategies, which could ultimately improve the physiological representation of the plant P cycle in land surface models.

Linking leaf dark respiration to leaf traits and reflectance spectroscopy across diverse forest types

Leaf dark respiration (Rdark), an important yet rarely quantified component of carbon cycling in forest ecosystems, is often simulated from leaf traits such as the maximum carboxylation capacity (Vcmax), leaf mass per area (LMA), nitrogen (N) and phosphorus (P) concentrations, in terrestrial biosphere models. However, the validity of these relationships across forest types remains to be thoroughly assessed. Here, we analyzed Rdark variability and its associations with Vcmax and other leaf traits across three temperate, subtropical and tropical forests in China, evaluating the effectiveness of leaf spectroscopy as a superior monitoring alternative. We found that leaf magnesium and calcium concentrations were more significant in explaining cross-site Rdark than commonly used traits like LMA, N and P concentrations, but univariate trait-Rdark relationships were always weak (r2 ≤ 0.15) and forest-specific. Although multivariate relationships of leaf traits improved the model performance, leaf spectroscopy outperformed trait-Rdark relationships, accurately predicted cross-site Rdark (r2 = 0.65) and pinpointed the factors contributing to Rdark variability. Our findings reveal a few novel traits with greater cross-site scalability regarding Rdark, challenging the use of empirical trait-Rdark relationships in process models and emphasize the potential of leaf spectroscopy as a promising alternative for estimating Rdark, which could ultimately improve process modeling of terrestrial plant respiration.

Imaging spectroscopy reveals topographic variability effects on grassland functional traits and drought responses

Functional traits and their variations are essential indicators of plant metabolism, growth, distribution, and survival and determine how a plant and an ecosystem function. Under the same climatic condition, traits can vary significantly between species and within the same species growing in different topographic conditions. When drought stress occurs, plants growing in these conditions may respond in various ways as their tolerance and adaptability are influenced by differences in topography. Insights into topographic variability-driven trait variation and drought response can improve our prediction of ecosystem functioning and ecological impacts. Imaging spectroscopy enables accurate identification of plant species, extraction of functional traits, and characterization of topography-driven and drought-related impacts on trait variation across spatial scales. However, applying these data in a heterogeneous grassland ecosystem is challenging as species are small, highly mixed, spectrally and texturally similar, and highly varied with small-scale variation in topography. This paper presents the first study to explore the use of high-resolution airborne imaging spectroscopy for characterizing the variation of key traits-such as chlorophylls (Chl), carotenoids (Car), Chl/Car ratio, water content (WC), and leaf area index (LAI)-across topographic gradients and under drought stress at the species level in a heterogeneous grassland. The results demonstrate significant relationships between functional traits and topographic variability, with the strength of these relationships varying among species and across different environmental conditions. Additionally, drought-induced trait responses differed notably both within and between species, particularly between drought-tolerant invasive species and drought-sensitive native species, as well as between lower and upper slope positions. The study makes a significant contribution to advancing our understanding of biological and ecological processes, enhancing the ability to predict plant invasion mechanism and ecosystem functioning under stressed environments.

JA, Cavender-Bares J. Plant diversity across dimensions: Coupling biodiversity measures from the ground and the sky

Tracking biodiversity across biomes over space and time has emerged as an imperative in unified global efforts to manage our living planet for a sustainable future for humanity. We harness the National Ecological Observatory Network to develop routines using airborne spectroscopic imagery to predict multiple dimensions of plant biodiversity at continental scale across biomes in the US. Our findings show strong and positive associations between diversity metrics based on spectral species and ground-based plant species richness and other dimensions of plant diversity, whereas metrics based on distance matrices did not. We found that spectral diversity consistently predicts analogous metrics of plant taxonomic, functional, and phylogenetic dimensions of biodiversity across biomes. The approach demonstrates promise for monitoring dimensions of biodiversity globally by integrating ground-based measures of biodiversity with imaging spectroscopy and advances capacity toward a Global Biodiversity Observing System.

Utilizing VSWIR spectroscopy for macronutrient and micronutrient profiling in winter wheat

This study explores the use of leaf-level visible-to-shortwave infrared (VSWIR) reflectance observations and partial least squares regression (PLSR) to predict foliar concentrations of macronutrients (nitrogen, phosphorus, potassium, calcium, magnesium, and sulfur), micronutrients (boron, copper, iron, manganese, zinc, molybdenum, aluminum, and sodium), and moisture content in winter wheat. A total of 360 fresh wheat leaf samples were collected from a wheat breeding population over two growing seasons. These leaf samples were used to collect VSWIR reflectance observations across a spectral range spanning 350 to 2,500 nm. These samples were then processed for nutrient composition to allow for the examination of the ability of reflectance to accurately model diverse chemical components in wheat foliage. Models for each nutrient were developed using a rigorous cross-validation methodology in conjunction with three distinct component selection methods to explore the trade-offs between model complexity and performance in the final models. We examined absolute minimum predicted residual error sum of squares (PRESS), backward iteration over PRESS, and Van der Voet's randomized t-test as component selection methods. In addition to contrasting component selection methods for each leaf trait, the importance of spectral regions through variable importance in projection scores was also examined. In general, the backward iteration method provided strong model performance while reducing model complexity relative to the other selection methods, yielding R 2 [relative percent difference (RPD), root mean squared error (RMSE)] values in the validation dataset of 0.84 (2.45, 6.91), 0.75 (1.97, 18.67), 0.78 (2.13, 16.49), 0.66 (1.71, 17.13), 0.68 (1.75, 14.51), 0.66 (1.72, 12.29), and 0.84 (2.46, 2.20) for nitrogen, calcium, magnesium, sulfur, iron, zinc, and moisture content on a wet basis, respectively. These model results demonstrate that VSWIR reflectance in combination with modern statistical modeling techniques provides a powerful high throughput method for the quantification of a wide range of foliar nutrient contents in wheat crops. This work has the potential to advance rapid, precise, and nondestructive field assessments of nutrient contents and deficiencies for precision agricultural management and to advance breeding program assessments.

Unveiling the transferability of PLSR models for leaf trait estimation: lessons from a comprehensive analysis with a novel global dataset

Leaf traits are essential for understanding many physiological and ecological processes. Partial least squares regression (PLSR) models with leaf spectroscopy are widely applied for trait estimation, but their transferability across space, time, and plant functional types (PFTs) remains unclear. We compiled a novel dataset of paired leaf traits and spectra, with 47 393 records for > 700 species and eight PFTs at 101 globally distributed locations across multiple seasons. Using this dataset, we conducted an unprecedented comprehensive analysis to assess the transferability of PLSR models in estimating leaf traits. While PLSR models demonstrate commendable performance in predicting chlorophyll content, carotenoid, leaf water, and leaf mass per area prediction within their training data space, their efficacy diminishes when extrapolating to new contexts. Specifically, extrapolating to locations, seasons, and PFTs beyond the training data leads to reduced R2 (0.12-0.49, 0.15-0.42, and 0.25-0.56) and increased NRMSE (3.58-18.24%, 6.27-11.55%, and 7.0-33.12%) compared with nonspatial random cross-validation. The results underscore the importance of incorporating greater spectral diversity in model training to boost its transferability. These findings highlight potential errors in estimating leaf traits across large spatial domains, diverse PFTs, and time due to biased validation schemes, and provide guidance for future field sampling strategies and remote sensing applications.

Foliar spectra accurately distinguish most temperate tree species and show strong phylogenetic signal

PREMISE

Spectroscopy is a powerful remote sensing tool for monitoring plant biodiversity over broad geographic areas. Increasing evidence suggests that foliar spectral reflectance can be used to identify trees at the species level. However, most studies have focused on only a limited number of species at a time, and few studies have explored the underlying phylogenetic structure of leaf spectra. Accurate species identifications are important for reliable estimations of biodiversity from spectral data.

METHODS

Using over 3500 leaf-level spectral measurements, we evaluated whether foliar reflectance spectra (400-2400 nm) can accurately differentiate most tree species from a regional species pool in eastern North America. We explored relationships between spectral, phylogenetic, and leaf functional trait variation as well as their influence on species classification using a hurdle regression model.

RESULTS

Spectral reflectance accurately differentiated tree species (κ = 0.736, ±0.005). Foliar spectra showed strong phylogenetic signal, and classification errors from foliar spectra, although present at higher taxonomic levels, were found predominantly between closely related species, often of the same genus. In addition, we find functional and phylogenetic distance broadly control the occurrence and frequency of spectral classification mistakes among species.

CONCLUSIONS

Our results further support the link between leaf spectral diversity, taxonomic hierarchy, and phylogenetic and functional diversity, and highlight the potential of spectroscopy to remotely sense plant biodiversity and vegetation response to global change.

Rapid quantification of biological nitrogen fixation using optical spectroscopy

Biological nitrogen fixation (BNF) provides a globally important input of nitrogen (N); its quantification is critical but technically challenging. Leaf reflectance spectroscopy offers a more rapid approach than traditional techniques to measure plant N concentration ([N]) and isotopes (δ15N). Here we present a novel method for rapidly and inexpensively quantifying BNF using optical spectroscopy. We measured plant [N], δ15N, and the amount of N derived from atmospheric fixation (Ndfa) following the standard traditional methodology using isotope ratio mass spectrometry (IRMS) from tissues grown under controlled conditions and taken from field experiments. Using the same tissues, we predicted the same three parameters using optical spectroscopy. By comparing the optical spectroscopy-derived results with traditional measurements (i.e. IRMS), the amount of Ndfa predicted by optical spectroscopy was highly comparable to IRMS-based quantification, with R2 being 0.90 (slope=0.90) and 0.94 (slope=1.02) (root mean square error for predicting legume δ15N was 0.38 and 0.43) for legumes grown in glasshouse and field, respectively. This novel application of optical spectroscopy facilitates BNF studies because it is rapid, scalable, low cost, and complementary to existing technologies. Moreover, the proposed method successfully captures the dynamic response of BNF to climate changes such as warming and drought.

Remote Sensing Techniques: Hyperspectral Imaging and Data Analysis

Hyperspectral imaging is a remote sensing technique that enables remote, noninvasive measurement of plant traits. Here, we outline the procedures for camera setup, scanning, and calibration, along with the acquisition of black and white reference materials, which are the key steps in collecting hyperspectral imagery. We also discuss the development of predictive models such as partial least-squares regression, using both large and small datasets, which are used to predict plant traits from hyperspectral data. To ensure practical applicability, we provide code examples that allow readers to immediately implement these techniques in real-world scenarios. We introduce these topics to beginners in an accessible and understandable manner.

Seasonal trends in leaf-level photosynthetic capacity and water use efficiency in a North American Eastern deciduous forest and their impact on canopy-scale gas exchange

Vegetative transpiration (E) and photosynthetic carbon assimilation (A) are known to be seasonally dynamic, with changes in their ratio determining the marginal water use efficiency (WUE). Despite an understanding that stomata play a mechanistic role in regulating WUE, it is still unclear how stomatal and nonstomatal processes influence change in WUE over the course of the growing season. As a result, limited understanding of the primary physiological drivers of seasonal dynamics of canopy WUE remains one of the largest uncertainties in earth system model projections of carbon and water exchange in temperate deciduous forest ecosystems. We investigated seasonal patterns in leaf-level physiological, hydraulic, and anatomical properties, including the seasonal progress of the stomatal slope parameter (g1 ; inversely proportional to WUE) and the maximum carboxylation rate (Vcmax ). Vcmax and g1 were seasonally variable; however, their patterns were not temporally synchronized. g1 generally showed an increasing trend until late in the season, while Vcmax peaked during the midsummer months. Seasonal progression of Vcmax was primarily driven by changes in leaf structural, and anatomical characteristics, while seasonal changes in g1 were most strongly related to changes in Vcmax and leaf hydraulics. Using a seasonally variable Vcmax and g1 to parameterize a canopy-scale gas exchange model increased seasonally aggregated A and E by 3% and 16%, respectively.

Plant optics: underlying mechanisms in remotely sensed signals for phenotyping applications

Optical-based remote sensing offers great potential for phenotyping vegetation traits and functions for a range of applications including vegetation monitoring and assessment. A key strength of optical-based approaches is the underlying mechanistic link to vegetation physiology, biochemistry, and structure that influences a spectral signal. By exploiting spectral variation driven by plant physiological response to environment, remotely sensed products can be used to estimate vegetation traits and functions. However, oftentimes these products are proxies based on covariance, which can lead to misinterpretation and decoupling under certain scenarios. This viewpoint will discuss (i) the optical properties of vegetation, (ii) applications of vegetation indices, solar-induced fluorescence, and machine-learning approaches, and (iii) how covariance can lead to good empirical proximation of plant traits and functions. Understanding and acknowledging the underlying mechanistic basis of plant optics must be considered as remotely sensed data availability and applications continue to grow. Doing so will enable appropriate application and consideration of limitations for the use of optical-based remote sensing for phenotyping applications.

Evolutionary history explains foliar spectral differences between arbuscular and ectomycorrhizal plant species

Leaf spectra are integrated foliar phenotypes that capture a range of traits and can provide insight into ecological processes. Leaf traits, and therefore leaf spectra, may reflect belowground processes such as mycorrhizal associations. However, evidence for the relationship between leaf traits and mycorrhizal association is mixed, and few studies account for shared evolutionary history. We conduct partial least squares discriminant analysis to assess the ability of spectra to predict mycorrhizal type. We model the evolution of leaf spectra for 92 vascular plant species and use phylogenetic comparative methods to assess differences in spectral properties between arbuscular mycorrhizal and ectomycorrhizal plant species. Partial least squares discriminant analysis classified spectra by mycorrhizal type with 90% (arbuscular) and 85% (ectomycorrhizal) accuracy. Univariate models of principal components identified multiple spectral optima corresponding with mycorrhizal type due to the close relationship between mycorrhizal type and phylogeny. Importantly, we found that spectra of arbuscular mycorrhizal and ectomycorrhizal species do not statistically differ from each other after accounting for phylogeny. While mycorrhizal type can be predicted from spectra, enabling the use of spectra to identify belowground traits using remote sensing, this is due to evolutionary history and not because of fundamental differences in leaf spectra due to mycorrhizal type.

Integrating plant physiology into simulation of fire behavior and effects

Wildfires are a global crisis, but current fire models fail to capture vegetation response to changing climate. With drought and elevated temperature increasing the importance of vegetation dynamics to fire behavior, and the advent of next generation models capable of capturing increasingly complex physical processes, we provide a renewed focus on representation of woody vegetation in fire models. Currently, the most advanced representations of fire behavior and biophysical fire effects are found in distinct classes of fine-scale models and do not capture variation in live fuel (i.e. living plant) properties. We demonstrate that plant water and carbon dynamics, which influence combustion and heat transfer into the plant and often dictate plant survival, provide the mechanistic linkage between fire behavior and effects. Our conceptual framework linking remotely sensed estimates of plant water and carbon to fine-scale models of fire behavior and effects could be a critical first step toward improving the fidelity of the coarse scale models that are now relied upon for global fire forecasting. This process-based approach will be essential to capturing the influence of physiological responses to drought and warming on live fuel conditions, strengthening the science needed to guide fire managers in an uncertain future.

Predicting leaf traits across functional groups using reflectance spectroscopy

Plant ecologists use functional traits to describe how plants respond to and influence their environment. Reflectance spectroscopy can provide rapid, non-destructive estimates of leaf traits, but it remains unclear whether general trait-spectra models can yield accurate estimates across functional groups and ecosystems. We measured leaf spectra and 22 structural and chemical traits for nearly 2000 samples from 103 species. These samples span a large share of known trait variation and represent several functional groups and ecosystems, mainly in eastern Canada. We used partial least-squares regression (PLSR) to build empirical models for estimating traits from spectra. Within the dataset, our PLSR models predicted traits such as leaf mass per area (LMA) and leaf dry matter content (LDMC) with high accuracy (R²  > 0.85; %RMSE < 10). Models for most chemical traits, including pigments, carbon fractions, and major nutrients, showed intermediate accuracy (R²  = 0.55-0.85; %RMSE = 12.7-19.1). Micronutrients such as Cu and Fe showed the poorest accuracy. In validation on external datasets, models for traits such as LMA and LDMC performed relatively well, while carbon fractions showed steep declines in accuracy. We provide models that produce fast, reliable estimates of several functional traits from leaf spectra. Our results reinforce the potential uses of spectroscopy in monitoring plant function around the world.

TSWIFT: Tower Spectrometer on Wheels for Investigating Frequent Timeseries for high-throughput phenotyping of vegetation physiology

BACKGROUND

Remote sensing instruments enable high-throughput phenotyping of plant traits and stress resilience across scale. Spatial (handheld devices, towers, drones, airborne, and satellites) and temporal (continuous or intermittent) tradeoffs can enable or constrain plant science applications. Here, we describe the technical details of TSWIFT (Tower Spectrometer on Wheels for Investigating Frequent Timeseries), a mobile tower-based hyperspectral remote sensing system for continuous monitoring of spectral reflectance across visible-near infrared regions with the capacity to resolve solar-induced fluorescence (SIF).

RESULTS

We demonstrate potential applications for monitoring short-term (diurnal) and long-term (seasonal) variation of vegetation for high-throughput phenotyping applications. We deployed TSWIFT in a field experiment of 300 common bean genotypes in two treatments: control (irrigated) and drought (terminal drought). We evaluated the normalized difference vegetation index (NDVI), photochemical reflectance index (PRI), and SIF, as well as the coefficient of variation (CV) across the visible-near infrared spectral range (400 to 900 nm). NDVI tracked structural variation early in the growing season, following initial plant growth and development. PRI and SIF were more dynamic, exhibiting variation diurnally and seasonally, enabling quantification of genotypic variation in physiological response to drought conditions. Beyond vegetation indices, CV of hyperspectral reflectance showed the most variability across genotypes, treatment, and time in the visible and red-edge spectral regions.

CONCLUSIONS

TSWIFT enables continuous and automated monitoring of hyperspectral reflectance for assessing variation in plant structure and function at high spatial and temporal resolutions for high-throughput phenotyping. Mobile, tower-based systems like this can provide short- and long-term datasets to assess genotypic and/or management responses to the environment, and ultimately enable the spectral prediction of resource-use efficiency, stress resilience, productivity and yield.

Is foliar spectrum predictive of belowground bacterial diversity? A case study in a peach orchard

Rhizosphere bacteria can have wide-ranging effects on their host plants, influencing plant biochemical and structural characteristics, and overall productivity. The implications of plant-microbe interactions provides an opportunity to interfere agriculture ecosystem with exogenous regulation of soil microbial community. Therefore, how to efficiently predict soil bacterial community at low cost is becoming a practical demand. Here, we hypothesize that foliar spectral traits can predict the diversity of bacterial community in orchard ecosystem. We tested this hypothesis by studying the ecological linkages between foliar spectral traits and soil bacterial community in a peach orchard in Yanqing, Beijing in 2020. Foliar spectral indexes were strongly correlated with alpha bacterial diversity and abundant genera that can promote soil nutrient conversion and utilization, such as Blastococcus, Solirubrobacter, and Sphingomonas at fruit mature stage. Certain unidentified or relative abundance <1% genera were also associated with foliar spectral traits. We selected specific indicators (photochemical reflectance index, normalized difference vegetable index, greenness index, and optimized soil-adjusted vegetation index) of foliar spectral indexes, alpha and beta diversities of bacterial community, and quantified the relations between foliar spectral traits and belowground bacterial community via SEM. The results of this study indicated that foliar spectral traits could powerfully predict belowground bacterial diversity. Characterizing plant attributes with easy-accessed foliar spectral indexes provides a new thinking in untangling the complex plant-microbe relationship, which could better cope with the decreased functional attributes (physiological, ecological, and productive traits) in orchard ecosystem.

The Spectral Species Concept in Living Color

Biodiversity monitoring is an almost inconceivable challenge at the scale of the entire Earth. The current (and soon to be flown) generation of spaceborne and airborne optical sensors (i.e., imaging spectrometers) can collect detailed information at unprecedented spatial, temporal, and spectral resolutions. These new data streams are preceded by a revolution in modeling and analytics that can utilize the richness of these datasets to measure a wide range of plant traits, community composition, and ecosystem functions. At the heart of this framework for monitoring plant biodiversity is the idea of remotely identifying species by making use of the 'spectral species' concept. In theory, the spectral species concept can be defined as a species characterized by a unique spectral signature and thus remotely detectable within pixel units of a spectral image. In reality, depending on spatial resolution, pixels may contain several species which renders species-specific assignment of spectral information more challenging. The aim of this paper is to review the spectral species concept and relate it to underlying ecological principles, while also discussing the complexities, challenges and opportunities to apply this concept given current and future scientific advances in remote sensing.

Leaf spectroscopy reveals divergent inter- and intra-species foliar trait covariation and trait-environment relationships across NEON domains

Concurrent measurement of multiple foliar traits to assess the full range of trade-offs among and within taxa and across broad environmental gradients is limited. Leaf spectroscopy can quantify a wide range of foliar functional traits, enabling assessment of interrelationships among traits and with the environment. We analyzed leaf trait measurements from 32 sites along the wide eco-climatic gradient encompassed by the US National Ecological Observatory Network (NEON). We explored the relationships among 14 foliar traits of 1103 individuals across and within species, and with environmental factors. Across all species pooled, the relationships between leaf economic traits (leaf mass per area, nitrogen) and traits indicative of defense and stress tolerance (phenolics, nonstructural carbohydrates) were weak, but became strong within certain species. Elevation, mean annual temperature and precipitation weakly predicted trait variation across species, although some traits exhibited species-specific significant relationships with environmental factors. Foliar functional traits vary idiosyncratically and species express diverse combinations of leaf traits to achieve fitness. Leaf spectroscopy offers an effective approach to quantify intra-species trait variation and covariation, and potentially could be used to improve the characterization of vegetation in Earth system models.

Late-day measurement of excised branches results in uncertainty in the estimation of two stomatal parameters derived from response curves in Populus deltoides Bartr. × Populus nigra L

Many terrestrial biosphere models depend on an understanding of the relationship between stomatal conductance and photosynthesis. However, unlike the measurement of photosynthetic parameters, such as the maximum carboxylation capacity, where standard methods (e.g., CO2 response or ACi curves) are widely accepted, a consensus method for empirically measuring parameters representing stomatal response has not yet emerged. Most models of stomatal response to environment represent stomatal conductance as being bounded by a lower intercept parameter (g0), and linearly scaled based on a multivariate term described by the stomatal slope parameter (g1). Here we employ the widely used Unified Stomatal Optimization model, to test whether g1 and g0 parameters are impacted by the choice of measurement method, either on an intact branch or a cut branch segment stored in water. We measured paired stomatal response curves on intact and excised branches of a hybrid poplar clone (Populus deltoides Bartr. × Populus nigra L. OP367), measured twice over a diurnal period. We found that predawn branch excision did not significantly affect measured g0 and g1 when measured within 4 h of excision. Measurement in the afternoon resulted in significantly higher values of g1 and lower values of g0, with values changing by 55% and 56%, respectively. Excision combined with afternoon measurement resulted in a marked effect on parameter estimates, with g1 increasing 89% from morning to afternoon and a 25% lower g1 for cut branches than those measured in situ. We also show that in hybrid poplar the differences in parameter estimates obtained from plants measured under different conditions can directly impact models of canopy function, reducing modeled transpiration by 18% over a simulated 12.5-h period. Although these results are only for a single isohydric woody species, our findings suggest that stomatal optimality parameters may not remain constant throughout the day.

High-throughput characterization, correlation, and mapping of leaf photosynthetic and functional traits in the soybean (Glycine max) nested association mapping population

Photosynthesis is a key target to improve crop production in many species including soybean [Glycine max (L.) Merr.]. A challenge is that phenotyping photosynthetic traits by traditional approaches is slow and destructive. There is proof-of-concept for leaf hyperspectral reflectance as a rapid method to model photosynthetic traits. However, the crucial step of demonstrating that hyperspectral approaches can be used to advance understanding of the genetic architecture of photosynthetic traits is untested. To address this challenge, we used full-range (500-2,400 nm) leaf reflectance spectroscopy to build partial least squares regression models to estimate leaf traits, including the rate-limiting processes of photosynthesis, maximum Rubisco carboxylation rate, and maximum electron transport. In total, 11 models were produced from a diverse population of soybean sampled over multiple field seasons to estimate photosynthetic parameters, chlorophyll content, leaf carbon and leaf nitrogen percentage, and specific leaf area (with R2 from 0.56 to 0.96 and root mean square error approximately <10% of the range of calibration data). We explore the utility of these models by applying them to the soybean nested association mapping population, which showed variability in photosynthetic and leaf traits. Genetic mapping provided insights into the underlying genetic architecture of photosynthetic traits and potential improvement in soybean. Notably, the maximum Rubisco carboxylation rate mapped to a region of chromosome 19 containing genes encoding multiple small subunits of Rubisco. We also mapped the maximum electron transport rate to a region of chromosome 10 containing a fructose 1,6-bisphosphatase gene, encoding an important enzyme in the regeneration of ribulose 1,5-bisphosphate and the sucrose biosynthetic pathway. The estimated rate-limiting steps of photosynthesis were low or negatively correlated with yield suggesting that these traits are not influenced by the same genetic mechanisms and are not limiting yield in the soybean NAM population. Leaf carbon percentage, leaf nitrogen percentage, and specific leaf area showed strong correlations with yield and may be of interest in breeding programs as a proxy for yield. This work is among the first to use hyperspectral reflectance to model and map the genetic architecture of the rate-limiting steps of photosynthesis.

A Perspective on Plant Phenomics: Coupling Deep Learning and Near-Infrared Spectroscopy

The trait-based approach in plant ecology aims at understanding and classifying the diversity of ecological strategies by comparing plant morphology and physiology across organisms. The major drawback of the approach is that the time and financial cost of measuring the traits on many individuals and environments can be prohibitive. We show that combining near-infrared spectroscopy (NIRS) with deep learning resolves this limitation by quickly, non-destructively, and accurately measuring a suite of traits, including plant morphology, chemistry, and metabolism. Such an approach also allows to position plants within the well-known CSR triangle that depicts the diversity of plant ecological strategies. The processing of NIRS through deep learning identifies the effect of growth conditions on trait values, an issue that plagues traditional statistical approaches. Together, the coupling of NIRS and deep learning is a promising high-throughput approach to capture a range of ecological information on plant diversity and functioning and can accelerate the creation of extensive trait databases.

The Feasibility of Leaf Reflectance-Based Taxonomic Inventories and Diversity Assessments of Species-Rich Grasslands: A Cross-Seasonal Evaluation Using Waveband Selection

Hyperspectral leaf-level reflectance data may enable the creation of taxonomic inventories and diversity assessments of grasslands, but little is known about the stability of species-specific spectral classes and discrimination models over the course of a growing season. Here, we present a cross-seasonal dataset of seventeen species that are common to a temperate, dry and nutrient-poor calcareous grassland, which spans thirteen sampling dates, a week apart, during the spring and summer months. By using a classification model that incorporated waveband selection (a sparse partial least squares discriminant analysis), most species could be classified, irrespective of the sampling date. However, between 42 and 95% of the available spectral information was required to obtain these results, depending on the date and model run. Feature selection was consistent across time for 70 out of 720 wavebands and reflectance around 1410 nm, representing water features, contributed the most to the discrimination. Model transferability was higher between neighbouring sampling dates and improved after the “green-up” period. Some species were consistently easy to classify, irrespective of time point, when using up to six latent variables, which represented about 99% of the total spectral variance, whereas other species required many latent variables, which represented very small spectral differences. We concluded that it did seem possible to create reliable taxonomic inventories for combinations of certain grassland species, irrespective of sampling date, and that the reason for this could lie in their distinctive morphological and/or biochemical leaf traits. Model transferability, however, was limited across dates and cross-seasonal sampling that captures leaf development would probably be necessary to create a predictive framework for the taxonomic monitoring of grasslands. In addition, most variance in the leaf reflectance within this system was driven by a subset of species and this finding implies challenges for the application of spectral variance in the estimation of biodiversity.

Integrating remote sensing with ecology and evolution to advance biodiversity conservation

Remote sensing has transformed the monitoring of life on Earth by revealing spatial and temporal dimensions of biological diversity through structural, compositional and functional measurements of ecosystems. Yet, many aspects of Earth's biodiversity are not directly quantified by reflected or emitted photons. Inclusive integration of remote sensing with field-based ecology and evolution is needed to fully understand and preserve Earth's biodiversity. In this Perspective, we argue that multiple data types are necessary for almost all draft targets set by the Convention on Biological Diversity. We examine five key topics in biodiversity science that can be advanced by integrating remote sensing with in situ data collection from field sampling, experiments and laboratory studies to benefit conservation. Lowering the barriers for bringing these approaches together will require global-scale collaboration.

Prediction of Photosynthetic, Biophysical, and Biochemical Traits in Wheat Canopies to Reduce the Phenotyping Bottleneck

To achieve food security, it is necessary to increase crop radiation use efficiency (RUE) and yield through the enhancement of canopy photosynthesis to increase the availability of assimilates for the grain, but its study in the field is constrained by low throughput and the lack of integrative measurements at canopy level. In this study, partial least squares regression (PLSR) was used with high-throughput phenotyping (HTP) data in spring wheat to build predictive models of photosynthetic, biophysical, and biochemical traits for the top, middle, and bottom layers of wheat canopies. The combined layer model predictions performed better than individual layer predictions with a significance as follows for photosynthesis R ² = 0.48, RMSE = 5.24 μmol m^-2 s^-1 and stomatal conductance: R ² = 0.36, RMSE = 0.14 mol m^-2 s^-1. The predictions of these traits from PLSR models upscaled to canopy level compared to field observations were statistically significant at initiation of booting (R ² = 0.3, p < 0.05; R ² = 0.29, p < 0.05) and at 7 days after anthesis (R ² = 0.15, p < 0.05; R ² = 0.65, p < 0.001). Using HTP allowed us to increase phenotyping capacity 30-fold compared to conventional phenotyping methods. This approach can be adapted to screen breeding progeny and genetic resources for RUE and to improve our understanding of wheat physiology by adding different layers of the canopy to physiological modeling.

Estimating peanut and soybean photosynthetic traits using leaf spectral reflectance and advance regression models

MAIN CONCLUSION

By combining hyperspectral signatures of peanut and soybean, we predicted Vcmax and Jmax with 70 and 50% accuracy. The PLS was the model that better predicted these photosynthetic parameters. One proposed key strategy for increasing potential crop stability and yield centers on exploitation of genotypic variability in photosynthetic capacity through precise high-throughput phenotyping techniques. Photosynthetic parameters, such as the maximum rate of Rubisco catalyzed carboxylation (Vc,max) and maximum electron transport rate supporting RuBP regeneration (Jmax), have been identified as key targets for improvement. The primary techniques for measuring these physiological parameters are very time-consuming. However, these parameters could be estimated using rapid and non-destructive leaf spectroscopy techniques. This study compared four different advanced regression models (PLS, BR, ARDR, and LASSO) to estimate Vc,max and Jmax based on leaf reflectance spectra measured with an ASD FieldSpec4. Two leguminous species were tested under different controlled environmental conditions: (1) peanut under different water regimes at normal atmospheric conditions and (2) soybean under high [CO2] and high night temperature. Model sensitivities were assessed for each crop and treatment separately and in combination to identify strengths and weaknesses of each modeling approach. Regardless of regression model, robust predictions were achieved for Vc,max (R2 = 0.70) and Jmax (R2 = 0.50). Field spectroscopy shows promising results for estimating spatial and temporal variations in photosynthetic capacity based on leaf and canopy spectral properties.

Sensor-based phenotyping of above-ground plant-pathogen interactions

Plant pathogens cause yield losses in crops worldwide. Breeding for improved disease resistance and management by precision agriculture are two approaches to limit such yield losses. Both rely on detecting and quantifying signs and symptoms of plant disease. To achieve this, the field of plant phenotyping makes use of non-invasive sensor technology. Compared to invasive methods, this can offer improved throughput and allow for repeated measurements on living plants. Abiotic stress responses and yield components have been successfully measured with phenotyping technologies, whereas phenotyping methods for biotic stresses are less developed, despite the relevance of plant disease in crop production. The interactions between plants and pathogens can lead to a variety of signs (when the pathogen itself can be detected) and diverse symptoms (detectable responses of the plant). Here, we review the strengths and weaknesses of a broad range of sensor technologies that are being used for sensing of signs and symptoms on plant shoots, including monochrome, RGB, hyperspectral, fluorescence, chlorophyll fluorescence and thermal sensors, as well as Raman spectroscopy, X-ray computed tomography, and optical coherence tomography. We argue that choosing and combining appropriate sensors for each plant-pathosystem and measuring with sufficient spatial resolution can enable specific and accurate measurements of above-ground signs and symptoms of plant disease.

Poor relationships between NEON Airborne Observation Platform data and field-based vegetation traits at a mesic grassland

Understanding spatial and temporal variation in plant traits is needed to accurately predict how communities and ecosystems will respond to global change. The National Ecological Observatory Network's (NEON's) Airborne Observation Platform (AOP) provides hyperspectral images and associated data products at numerous field sites at 1 m spatial resolution, potentially allowing high-resolution trait mapping. We tested the accuracy of readily available data products of NEON's AOP, such as Leaf Area Index (LAI), Total Biomass, Ecosystem Structure (Canopy height model [CHM]), and Canopy Nitrogen, by comparing them to spatially extensive field measurements from a mesic tallgrass prairie. Correlations with AOP data products exhibited generally weak or no relationships with corresponding field measurements. The strongest relationships were between AOP LAI and ground-measured LAI (r = 0.32) and AOP Total Biomass and ground-measured biomass (r = 0.23). We also examined how well the full reflectance spectra (380-2,500 nm), as opposed to derived products, could predict vegetation traits using partial least-squares regression (PLSR) models. Among all the eight traits examined, only Nitrogen had a validation R 2 of more than 0.25. For all vegetation traits, validation R 2 ranged from 0.08 to 0.29 and the range of the root mean square error of prediction (RMSEP) was 14-64%. Our results suggest that currently available AOP-derived data products should not be used without extensive ground-based validation. Relationships using the full reflectance spectra may be more promising, although careful consideration of field and AOP data mismatches in space and/or time, biases in field-based measurements or AOP algorithms, and model uncertainty are needed. Finally, grassland sites may be especially challenging for airborne spectroscopy because of their high species diversity within a small area, mixed functional types of plant communities, and heterogeneous mosaics of disturbance and resource availability. Remote sensing observations are one of the most promising approaches to understanding ecological patterns across space and time. But the opportunity to engage a diverse community of NEON data users will depend on establishing rigorous links with in-situ field measurements across a diversity of sites.

Spectral Retrieval of Eucalypt Leaf Biochemical Traits by Inversion of the Fluspect-Cx Model

Leaf biochemical traits indicating early symptoms of plant stress can be assessed using imaging spectroscopy combined with radiative transfer modelling (RTM). In this study, we assessed the potential applicability of the leaf radiative transfer model Fluspect-Cx to simulate optical properties and estimate leaf biochemical traits through inversion of two native Australian eucalypt species: Eucalyptus dalrympleana and E. delegetensis. The comparison of measured and simulated optical properties revealed the necessity to recalibrate the refractive index and specific absorption coefficients of the eucalypt leaves’ biochemical constituents. Subsequent validation of the modified Fluspect-Cx showed a closer agreement with the spectral measurements. The average root mean square error (RMSE) of reflectance, transmittance and absorptance values within the wavelength interval of 450–1600 nm was smaller than 1%. We compared the performance of both the original and recalibrated Fluspect-Cx versions through inversions aiming to simultaneously retrieve all model inputs from leaf optical properties with and without prior information. The inversion of recalibrated Fluspect-Cx constrained by laboratory-based measurements produced a superior accuracy in estimations of leaf water content (RMSE = 0.0013 cm, NRMSE = 6.55%) and dry matter content (RMSE = 0.0036 g·cm−2, NRMSE = 21.28%). The estimation accuracies of chlorophyll content (RMSE = 8.46 µg·cm−2, NRMSE = 24.73%), carotenoid content (RMSE = 3.83 µg·cm−2, NRMSE = 30.82%) and anthocyanin content (RMSE = 1.69 µg·cm−2, NRMSE = 37.12%) were only marginally better than for the inversion without any constraints. Additionally, we investigated the possibility to substitute the prior information derived in the laboratory by non-destructive reflectance-based spectral indices sensitive to the retrieved biochemical traits, resulting in the most accurate estimation of carotenoid content (RMSE = 3.65 µg·cm−2, NRMSE = 29%). Future coupling of the recalibrated Fluspect with a forest canopy RTM is expected to facilitate retrieval of biophysical traits from spectral air/space-borne image data, allowing for assessing the actual physiological status and health of eucalypt forest canopies.

Predicting biochemical acclimation of leaf photosynthesis in soybean under in-field canopy warming using hyperspectral reflectance

Traditional gas exchange measurements are cumbersome, which makes it difficult to capture variation in biochemical parameters, namely the maximum rate of carboxylation measured at a reference temperature (Vcmax25 ) and the maximum electron transport at a reference temperature (Jmax25 ), in response to growth temperature over time from days to weeks. Hyperspectral reflectance provides reliable measures of Vcmax25 and Jmax25 ; however, the capability of this method to capture biochemical acclimations of the two parameters to high growth temperature over time has not been demonstrated. In this study, Vcmax25 and Jmax25 were measured over multiple growth stages during two growing seasons for field-grown soybeans using both gas exchange techniques and leaf spectral reflectance under ambient and four elevated canopy temperature treatments (ambient+1.5, +3, +4.5, and +6°C). Spectral vegetation indices and machine learning methods were used to build predictive models for Vcmax25 and Jmax25 , based on the leaf reflectance. Results showed that these models yielded an R2 of 0.57-0.65 and 0.48-0.58 for Vcmax25 and Jmax25 , respectively. Hyperspectral reflectance captured biochemical acclimation of leaf photosynthesis to high temperature in the field, improving spatial and temporal resolution in the ability to assess the impact of future warming on crop productivity.

A novel approach for long-term spectral monitoring of desert shrubs affected by an oil spill

Crude oil pollution is a global environmental concern since it persists in the environment longer than most conventional carbon sources. In December 2014, the hyper-arid Evrona Nature Reserve, Israel, experienced large-scale contamination when crude oil spilled. The overarching goal of the study was to investigate the possible changes, caused by an accidental crude oil spill, in the leaf reflectance and biochemical composition of four natural habitat desert shrubs. The specific objectives were (1) to monitor the biochemical properties of dominant shrub species in the polluted and control areas; (2) to study the long-term consequences of the contamination; (3) to provide information that will assist in planning rehabilitation actions; and (4) to explore the feasibility of vegetation indices (VIs), along with the machine learning (ML) technique, for detecting stressed shrubs based on the full spectral range. Four measurement campaigns were conducted in 2018 and 2019. Along with the various stress indicators, field spectral measurements were performed in the range of 350-2500 nm. A regression analysis to examine the relation of leaf reflectance to biochemical contents was carried out, to reveal the relevant wavelengths in which polluted and control plants differ. Vegetation indices applied in previous studies were found to be less sensitive for indirect detection of long-term oil contamination. A novel spectral index, based on indicative spectral bands, named the "normalized blue-green stress index" (NBGSI), was established. The NBGSI distinguished significantly between shrubs located in the polluted and in the control areas. The NBGSI showed a strong linear correlation with pheophytin a. Machine learning classification algorithms obtained high overall prediction accuracy in distinguishing between shrubs located in the oil-polluted and the control sites, indicating internal component differences. The findings of this study demonstrate the efficacy of indirect and non-destructive spectral tools for detecting and monitoring oil pollution stress in shrubs.

A starting guide to root ecology: strengthening ecological concepts and standardising root classification, sampling, processing and trait measurements

In the context of a recent massive increase in research on plant root functions and their impact on the environment, root ecologists currently face many important challenges to keep on generating cutting-edge, meaningful and integrated knowledge. Consideration of the below-ground components in plant and ecosystem studies has been consistently called for in recent decades, but methodology is disparate and sometimes inappropriate. This handbook, based on the collective effort of a large team of experts, will improve trait comparisons across studies and integration of information across databases by providing standardised methods and controlled vocabularies. It is meant to be used not only as starting point by students and scientists who desire working on below-ground ecosystems, but also by experts for consolidating and broadening their views on multiple aspects of root ecology. Beyond the classical compilation of measurement protocols, we have synthesised recommendations from the literature to provide key background knowledge useful for: (1) defining below-ground plant entities and giving keys for their meaningful dissection, classification and naming beyond the classical fine-root vs coarse-root approach; (2) considering the specificity of root research to produce sound laboratory and field data; (3) describing typical, but overlooked steps for studying roots (e.g. root handling, cleaning and storage); and (4) gathering metadata necessary for the interpretation of results and their reuse. Most importantly, all root traits have been introduced with some degree of ecological context that will be a foundation for understanding their ecological meaning, their typical use and uncertainties, and some methodological and conceptual perspectives for future research. Considering all of this, we urge readers not to solely extract protocol recommendations for trait measurements from this work, but to take a moment to read and reflect on the extensive information contained in this broader guide to root ecology, including sections I-VII and the many introductions to each section and root trait description. Finally, it is critical to understand that a major aim of this guide is to help break down barriers between the many subdisciplines of root ecology and ecophysiology, broaden researchers' views on the multiple aspects of root study and create favourable conditions for the inception of comprehensive experiments on the role of roots in plant and ecosystem functioning.

Incorporating Multi-Scale, Spectrally Detected Nitrogen Concentrations into Assessing Nitrogen Use Efficiency for Winter Wheat Breeding Populations

Annually, over 100 million tons of nitrogen fertilizer are applied in wheat fields to ensure maximum productivity. This amount is often more than needed for optimal yield and can potentially have negative economic and environmental consequences. Monitoring crop nitrogen levels can inform managers of input requirements and potentially avoid excessive fertilization. Standard methods assessing plant nitrogen content, however, are time-consuming, destructive, and expensive. Therefore, the development of approaches estimating leaf nitrogen content in vivo and in situ could benefit fertilization management programs as well as breeding programs for nitrogen use efficiency (NUE). This study examined the ability of hyperspectral data to estimate leaf nitrogen concentrations and nitrogen uptake efficiency (NUpE) at the leaf and canopy levels in multiple winter wheat lines across two seasons. We collected spectral profiles of wheat foliage and canopies using full-range (350–2500 nm) spectroradiometers in combination with leaf tissue collection for standard analytical determination of nitrogen. We then applied partial least-squares regression, using spectral and reference nitrogen measurements, to build predictive models of leaf and canopy nitrogen concentrations. External validation of data from a multi-year model demonstrated effective nitrogen estimation at leaf and canopy level (R2 = 0.72, 0.67; root-mean-square error (RMSE) = 0.42, 0.46; normalized RMSE = 12, 13; bias = −0.06, 0.04, respectively). While NUpE was not directly well predicted using spectral data, NUpE values calculated from predicted leaf and canopy nitrogen levels were well correlated with NUpE determined using traditional methods, suggesting the potential of the approach in possibly replacing standard determination of plant nitrogen in assessing NUE. The results of our research reinforce the ability of hyperspectral data for the retrieval of nitrogen status and expand the utility of hyperspectral data in winter wheat lines to the application of nitrogen management practices and breeding programs.

Spectroscopy outperforms leaf trait relationships for predicting photosynthetic capacity across different forest types

Leaf trait relationships are widely used to predict ecosystem function in terrestrial biosphere models (TBMs), in which leaf maximum carboxylation capacity (V_c,max ), an important trait for modelling photosynthesis, can be inferred from other easier-to-measure traits. However, whether trait-V_c,max relationships are robust across different forest types remains unclear. Here we used measurements of leaf traits, including one morphological trait (leaf mass per area), three biochemical traits (leaf water content, area-based leaf nitrogen content, and leaf chlorophyll content), one physiological trait (V_c,max ), as well as leaf reflectance spectra, and explored their relationships within and across three contrasting forest types in China. We found weak and forest type-specific relationships between V_c,max and the four morphological and biochemical traits (R²  ≤ 0.15), indicated by significantly changing slopes and intercepts across forest types. By contrast, reflectance spectroscopy effectively collapsed the differences in the trait-V_c,max relationships across three forest biomes into a single robust model for V_c,max (R²  = 0.77), and also accurately estimated the four traits (R²  = 0.75-0.94). These findings challenge the traditional use of the empirical trait-V_c,max relationships in TBMs for estimating terrestrial plant photosynthesis, but also highlight spectroscopy as an efficient alternative for characterising V_c,max and multitrait variability, with critical insights into ecosystem modelling and functional trait ecology.

Detection of the metabolic response to drought stress using hyperspectral reflectance

Drought is the most important limitation on crop yield. Understanding and detecting drought stress in crops is vital for improving water use efficiency through effective breeding and management. Leaf reflectance spectroscopy offers a rapid, non-destructive alternative to traditional techniques for measuring plant traits involved in a drought response. We measured drought stress in six glasshouse-grown agronomic species using physiological, biochemical, and spectral data. In contrast to physiological traits, leaf metabolite concentrations revealed drought stress before it was visible to the naked eye. We used full-spectrum leaf reflectance data to predict metabolite concentrations using partial least-squares regression, with validation R2 values of 0.49-0.87. We show for the first time that spectroscopy may be used for the quantitative estimation of proline and abscisic acid, demonstrating the first use of hyperspectral data to detect a phytohormone. We used linear discriminant analysis and partial least squares discriminant analysis to differentiate between watered plants and those subjected to drought based on measured traits (accuracy: 71%) and raw spectral data (66%). Finally, we validated our glasshouse-developed models in an independent field trial. We demonstrate that spectroscopy can detect drought stress via underlying biochemical changes, before visual differences occur, representing a powerful advance for measuring limitations on yield.

A best-practice guide to predicting plant traits from leaf-level hyperspectral data using partial least squares regression

Partial least squares regression (PLSR) modelling is a statistical technique for correlating datasets, and involves the fitting of a linear regression between two matrices. One application of PLSR enables leaf traits to be estimated from hyperspectral optical reflectance data, facilitating rapid, high-throughput, non-destructive plant phenotyping. This technique is of interest and importance in a wide range of contexts including crop breeding and ecosystem monitoring. The lack of a consensus in the literature on how to perform PLSR means that interpreting model results can be challenging, applying existing models to novel datasets can be impossible, and unknown or undisclosed assumptions can lead to incorrect or spurious predictions. We address this lack of consensus by proposing best practices for using PLSR to predict plant traits from leaf-level hyperspectral data, including a discussion of when PLSR is applicable, and recommendations for data collection. We provide a tutorial to demonstrate how to develop a PLSR model, in the form of an R script accompanying this manuscript. This practical guide will assist all those interpreting and using PLSR models to predict leaf traits from spectral data, and advocates for a unified approach to using PLSR for predicting traits from spectra in the plant sciences.

Including leaf trait information helps empirical estimation of jmax from vcmax in cool-temperate deciduous forests

Understanding the uncertainty in the parameterization of the two photosynthetic capacity parameters, leaf maximum carboxylation rate (Vcmax), and maximum electron transport rate (Jmax), is crucial for modeling and predicting carbon fluxes in terrestrial ecosystems. In gas exchange models, to date, Jmax is typically estimated from Vcmax based on a linear regression. However, recent studies have revealed that this relationship varies, dependent upon species, leaf groups, and time, so it is doubtful that the regression applies universally. Furthermore, far less is known regarding how other leaf traits affect the regression. In this study we analyzed the two key photosynthetic parameters and popularly measurable leaf traits, leaf chlorophyll concentration and leaf mass per area (LMA), of cool-temperate forest stands in Japan, aiming to construct a simple regression applicable to temperate deciduous forests, at least. The analysis was based on a long-term field dataset covering years of data for both sunlit and shaded leaves at different altitudes. Results showed that the best-fitted slope of the regression differed markedly from those previously reported, which were typically acquired from sunlit leaves. LMA had a significant effect on the regression, producing the lowest root mean square errors and the highest ratio of performance to deviation values (RPD = 2.017). Although more data are needed to validate in other ecosystems, our approach at least provides a promising way to substantially improve photosynthesis model predictions, by introducing leaf traits into the popular empirical regression of Jmax against Vcmax, and ultimately to better understand the functioning of the photosynthetic machinery.

Seasonal trends in photosynthesis and leaf traits in scarlet oak

Understanding seasonal variation in photosynthesis is important for understanding and modeling plant productivity. Here, we used shotgun sampling to examine physiological, structural and spectral leaf traits of upper canopy, sun-exposed leaves in Quercus coccinea Münchh (scarlet oak) across the growing season in order to understand seasonal trends, explore the mechanisms underpinning physiological change and investigate the impact of extrapolating measurements from a single date to the whole season. We tested the hypothesis that photosynthetic rates and capacities would peak at the summer solstice, i.e., at the time of peak photoperiod. Contrary to expectations, our results reveal a late-season peak in both photosynthetic capacity and rate before the expected sharp decrease at the start of senescence. This late-season maximum occurred after the higher summer temperatures and vapor pressure deficit and was correlated with the recovery of leaf water content and increased stomatal conductance. We modeled photosynthesis at the top of the canopy and found that the simulated results closely tracked the maximum carboxylation capacity of Rubisco. For both photosynthetic capacity and modeled top-of-canopy photosynthesis, the maximum value was therefore not observed at the summer solstice. Rather, in each case, the measurements at and around the solstice were close to the overall seasonal mean, with values later in the season leading to deviations from the mean by up to 41 and 52%, respectively. Overall, we found that the expected Gaussian pattern of photosynthesis was not observed. We conclude that an understanding of species- and environment-specific changes in photosynthesis across the season is essential for correct estimation of seasonal photosynthetic capacity.

Source:sink imbalance detected with leaf- and canopy-level spectroscopy in a field-grown crop

The finely tuned balance between sources and sinks determines plant resource partitioning and regulates growth and development. Understanding and measuring metabolic indicators of source or sink limitation forms a vital part of global efforts to increase crop yield for future food security. We measured metabolic profiles of Cucurbita pepo (zucchini) grown in the field under carbon sink limitation and control conditions. We demonstrate that these profiles can be measured non-destructively using hyperspectral reflectance at both leaf and canopy scales. Total non-structural carbohydrates (TNC) increased 82% in sink-limited plants; leaf mass per unit area (LMA) increased 38% and free amino acids increased 22%. Partial least-squares regression (PLSR) models link these measured functional traits with reflectance data, enabling high-throughput estimation of traits comprising the sink limitation response. Leaf- and canopy-scale models for TNC had R² values of 0.93 and 0.64 and %RMSE of 13 and 38%, respectively. For LMA, R² values were 0.91 and 0.60 and %RMSE 7 and 14%; for free amino acids, R² was 0.53 and 0.21 with %RMSE 20 and 26%. Remote sensing can enable accurate, rapid detection of sink limitation in the field at the leaf and canopy scale, greatly expanding our ability to understand and measure metabolic responses to stress.

Estimating individual-level plant traits at scale

Functional ecology has increasingly focused on describing ecological communities based on their traits (measurable features affecting individuals' fitness and performance). Analyzing trait distributions within and among forests could significantly improve understanding of community composition and ecosystem function. Historically, data on trait distributions are generated by (1) collecting a small number of leaves from a small number of trees, which suffers from limited sampling but produces information at the fundamental ecological unit (the individual), or (2) using remote-sensing images to infer traits, producing information continuously across large regions, but as plots (containing multiple trees of different species) or pixels, not individuals. Remote-sensing methods that identify individual trees and estimate their traits would provide the benefits of both approaches, producing continuous large-scale data linked to biological individuals. We used data from the National Ecological Observatory Network (NEON) to develop a method to scale up functional traits from 160 trees to the millions of trees within the spatial extent of two NEON sites. The pipeline consists of three stages: (1) image segmentation, to identify individual trees and estimate structural traits; (2) an ensemble of models to infer leaf mass area (LMA), nitrogen, carbon, and phosphorus content using hyperspectral signatures, and DBH from allometry; and (3) predictions for segmented crowns for the full remote-sensing footprint at the NEON sites. The R² values on held-out test data ranged from 0.41 to 0.75 on held-out test data. The ensemble approach performed better than single partial least-squares models. Carbon performed poorly compared to other traits (R² of 0.41). The crown segmentation step contributed the most uncertainty in the pipeline, due to over-segmentation. The pipeline produced good estimates of DBH (R² of 0.62 on held-out data). Trait predictions for crowns performed significantly better than comparable predictions on pixels, resulting in improvement of R² on test data of between 0.07 and 0.26. We used the pipeline to produce individual-level trait data for ~5 million individual crowns, covering a total extent of ~360 km² . This large data set allows testing ecological questions on landscape scales, revealing that foliar traits are correlated with structural traits and environmental conditions.

Evaluating the Performance of Hyperspectral Leaf Reflectance to Detect Water Stress and Estimation of Photosynthetic Capacities

Advanced techniques capable of early, rapid, and nondestructive detection of the impacts of drought on fruit tree and the measurement of the underlying photosynthetic traits on a large scale are necessary to meet the challenges of precision farming and full prediction of yield increases. We tested the application of hyperspectral reflectance as a high-throughput phenotyping approach for early identification of water stress and rapid assessment of leaf photosynthetic traits in citrus trees by conducting a greenhouse experiment. To this end, photosynthetic CO2 assimilation rate (Pn), stomatal conductance (Cond) and transpiration rate (Trmmol) were measured with gas-exchange approaches alongside measurements of leaf hyperspectral reflectance from citrus grown across a gradient of soil drought levels six times, during 20 days of stress induction and 13 days of rewatering. Water stress caused Pn, Cond, and Trmmol rapid and continuous decline throughout the entire drought period. The upper layer was more sensitive to drought than middle and lower layers. Water stress could also bring continuous and dynamic changes of the mean spectral reflectance and absorptance over time. After trees were rewatered, these differences were not obvious. The original reflectance spectra of the four water stresses were surprisingly of low diversity and could not track drought responses, whereas specific hyperspectral spectral vegetation indices (SVIs) and absorption features or wavelength position variables presented great potential. The following machine-learning algorithms: random forest (RF), support vector machine (SVM), gradient boost (GDboost), and adaptive boosting (Adaboost) were used to develop a measure of photosynthesis from leaf reflectance spectra. The performance of four machine-learning algorithms were assessed, and RF algorithm yielded the highest predictive power for predicting photosynthetic parameters (R2 was 0.92, 0.89, and 0.88 for Pn, Cond, and Trmmol, respectively). Our results indicated that leaf hyperspectral reflectance is a reliable and stable method for monitoring water stress and yield increase, with great potential to be applied in large-scale orchards.

Predicting photosynthetic capacity in tobacco using shortwave infrared spectral reflectance

Plateauing yield and stressful environmental conditions necessitate selecting crops for superior physiological traits with untapped potential to enhance crop performance. Plant productivity is often limited by carbon fixation rates that could be improved by increasing maximum photosynthetic carboxylation capacity (Vcmax). However, Vcmax measurements using gas exchange and biochemical assays are slow and laborious, prohibiting selection in breeding programs. Rapid hyperspectral reflectance measurements show potential for predicting Vcmax using regression models. While several hyperspectral models have been developed, contributions from different spectral regions to predictions of Vcmax have not been clearly identified or linked to biochemical variation contributing to Vcmax. In this study, hyperspectral reflectance data from 350-2500 nm were used to build partial least squares regression models predicting in vivo and in vitro Vcmax. Wild-type and transgenic tobacco plants with antisense reductions in Rubisco content were used to alter Vcmax independent from chlorophyll, carbon, and nitrogen content. Different spectral regions were used to independently build partial least squares regression models and identify key regions linked to Vcmax and other leaf traits. The greatest Vcmax prediction accuracy used a portion of the shortwave infrared region from 2070 nm to 2470 nm, where the inclusion of fewer spectral regions resulted in more accurate models.

Field-based remote sensing models predict radiation use efficiency in wheat

Wheat yields are stagnating or declining in many regions, requiring efforts to improve the light conversion efficiency, known as radiation use efficiency (RUE). RUE is a key trait in plant physiology because it links light capture and primary metabolism with biomass accumulation and yield, but its measurement is time consuming and this has limited its use in fundamental research and large-scale physiological breeding. In this study, high-throughput plant phenotyping (HTPP) approaches were used among a population of field-grown wheat with variation in RUE and photosynthetic traits to build predictive models of RUE, biomass, and intercepted photosynthetically active radiation (IPAR). Three approaches were used: best combination of sensors; canopy vegetation indices; and partial least squares regression. The use of remote sensing models predicted RUE with up to 70% accuracy compared with ground truth data. Water indices and canopy greenness indices [normalized difference vegetation index (NDVI), enhanced vegetation index (EVI)] are the better option to predict RUE, biomass, and IPAR, and indices related to gas exchange, non-photochemical quenching [photochemical reflectance index (PRI)] and senescence [structural-insensitive pigment index (SIPI)] are better predictors for these traits at the vegetative and grain-filling stages, respectively. These models will be instrumental to explain canopy processes, improve crop growth and yield modelling, and potentially be used to predict RUE in different crops or ecosystems.

Leaf traits and canopy structure together explain canopy functional diversity: an airborne remote sensing approach

Plant functional diversity is strongly connected to photosynthetic carbon assimilation in terrestrial ecosystems. However, many of the plant functional traits that regulate photosynthetic capacity, including foliar nitrogen concentration and leaf mass per area, vary significantly between and within plant functional types and vertically through forest canopies, resulting in considerable landscape-scale heterogeneity in three dimensions. Hyperspectral imagery has been used extensively to quantify functional traits across a range of ecosystems but is generally limited to providing information for top of canopy leaves only. On the other hand, lidar data can be used to retrieve the vertical structure of forest canopies. Because these data are rarely collected at the same time, there are unanswered questions about the effect of forest structure on the three -dimensional spatial patterns of functional traits across ecosystems. In the United States, the National Ecological Observatory Network's Airborne Observation Platform (NEON AOP) provides an opportunity to address this structure-function relationship by collecting lidar and hyperspectral data together across a variety of ecoregions. With a fusion of hyperspectral and lidar data from the NEON AOP and field-collected foliar trait data, we assessed the impacts of forest structure on spatial patterns of N. In addition, we examine the influence of abiotic gradients and management regimes on top-of-canopy percent N and total canopy N (i.e., the total amount of N [g/m² ] within a forest canopy) at a NEON site consisting of a mosaic of open longleaf pine and dense broadleaf deciduous forests. Our resulting maps suggest that, in contrast to top of canopy values, total canopy N variation is dampened across this landscape resulting in relatively homogeneous spatial patterns. At the same time, we found that leaf functional diversity and canopy structural diversity showed distinct dendritic patterns related to the spatial distribution of plant functional types.

Foliage Biophysical Trait Prediction from Laboratory Spectra in Norway Spruce Is More Affected by Needle Age Than by Site Soil Conditions

Scaling leaf-level optical signals to the canopy level is essential for airborne and satellite-based forest monitoring. In evergreen trees, biophysical and optical traits may change as foliage ages. This study aims to evaluate the effect of age in Norway spruce needle on biophysical trait-prediction based on laboratory leaf-level spectra. Mature Norway spruce trees were sampled at forest stands in ten headwater catchments with different soil properties. Foliage biophysical traits (pigments, phenolics, lignin, cellulose, leaf mass per area, water, and nitrogen content) were assessed for three needle-age classes. Complementary samples for needle reflectance and transmittance were measured using an integrating sphere. Partial least square regression (PLSR) models were constructed for predicting needle biophysical traits from reflectance—separating needle age classes and assessing all age classes together. The ten study sites differed in soil properties rather than in needle biophysical traits. Optical properties consistently varied among age classes; however, variation related to the soil conditions was less pronounced. The predictive power of PLSR models was needle-age dependent for all studied traits. The following traits were predicted with moderate accuracy: needle pigments, phenolics, leaf mass per area and water content. PLSR models always performed better if all needle age classes were included (rather than individual age classes separately). This also applied to needle-age independent traits (water and lignin). Thus, we recommend including not only current but also older needle traits as a ground truth for evergreen conifers with long needle lifespan.