Understanding the Fundamental Basis for Biofilm Formation on Plastic Surfaces: Role of Conditioning Films

Adsorption of benzophenone-3 and octocrylene UV filters on polyethylene: analysis by HPLC-MS/MS and voltammetry with screen-printed electrodes

Microplastics (MPs) are persistent pollutants that can adsorb contaminants, facilitating their accumulation in aquatic ecosystems. The presence of UV filters (UVFs) such as benzophenone-3 (BP3) and octocrylene (OC), exacerbates this issue, particularly in coastal areas. This study presents an innovative dual-method approach combining high-performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) and differential pulse adsorptive stripping voltammetry (DPAdSV) to assess the adsorption of UVFs on polyethylene (PE), a widely found polymer in aquatic environments. Adsorption kinetics were analysed using pseudo-first-order (PFOM) and pseudo-second-order (PSOM) models, revealing a higher equilibrium sorption capacity for OC due to its stronger hydrophobic interactions with PE. A central composite design (CCD) was employed to enhance resources efficiency in experimentation and controlled experiments exposed the materials to both pure fresh water and synthetic seawater. The results indicate a higher adsorption affinity of OC on PE than BP3, attributed to its high octanol-water partition coefficient (log Kow 6.88) and stronger hydrophobic interactions. Exposure time was the most influential variable across both media, while pH and temperature had a significant effect on BP3 adsorption in synthetic seawater. Hydrophobic partitioning, aided by van der Waals forces, was identified as the dominant interaction mechanism for both UVFs, with π-π and electrostatic interactions playing minimal roles due to the nature of the polymer. The study provides new insights into how polymer-pollutant interactions vary across environmental conditions and offers a novel voltammetric alternative for in-situ UVFs monitoring.

A multi-strain, biofilm-forming cocktail of Bacillus spp. and Pediococcus spp. alters the microbial composition on polyethylene calf housing surfaces

Application of a beneficial microbial cocktail of Bacillus spp. and Pediococcus spp. was evaluated first for adherence to polyethylene calf hutch material, and second, to determine if application in situ to individual calf hutches post-cleaning influenced surface recolonization by enteric pathogens. Three treatments were utilized: (i) no application (NC), (ii) chlorine-free, distilled water (DW), or (iii) an application of a microbial inoculant containing Bacillus spp. and Pediococcus spp. at a concentration of 0.4 g/m2 of hutch space (LF). Thirty-six 15 × 15 cm pieces of naïve, sterile polyethylene calf hutch material received either NC or LF and were incubated at 28°C, and bacterial growth was evaluated by total aerobic plate counts at 24, 48, and 72 h post-application. Thirty polyethylene calf hutches (n = 10/treatment) were randomized to NC, DW, or LF 24 h after cleaning. Calves were placed in the hutches 24 h after treatment application and monitored daily for 28 d. In situ surface samples were randomized by time from five unique locations within the calf hutch interior: 24 h post-cleaning and then 24 h, 7 d, 14 d, and 21 d post-application. Total aerobic plate counts and culture-independent approaches RT-qPCR and 16S amplicon sequencing were used to detect and identify the composition of the bacterial community in situ. The bacteria in the inoculant were able to successfully colonize on polyethylene, and application to individual polyethylene calf housing in situ influenced microbial diversity and reduced the presence of some undesirable bacteria on high-contact interior surfaces.IMPORTANCEDue to its multifactorial nature, neonatal calf diarrhea can be difficult to manage on farms. Clean housing environments are a critical disease control point, especially for calves less than one month of age. Application of a beneficial biofilm-forming bacterial product after cleaning of neonatal calf housing may influence the microbial communities present on the surface, particularly those that may present disease risk to calves in early life.

Responses of natural plastisphere community and zooplankton to microplastic pollution: a review on novel remediation strategies

The ubiquitous presence of microplastics (MP) in different environments has been well documented. Microplastic contamination has rapidly become a serious environmental issue, threatening marine ecosystems and human health. MP has been reported to accumulate organic pollutants associated with various microbial communities. The MP hazard is specifically serious in urban lakes, near-shore beaches, and benthic sediments. To prevent the further spread of MP and mitigate the increasing level of MP contamination, along with its associated environmental and economic concerns, it is essential to address mitigation strategies and their negative impacts. Contributed by low degradability, hydrophobicity, and sorption potential, the plastic surface acts as an important substrate colonized by several microorganisms known as the plastisphere community. Adaptive responses of the plastisphere community, MP ingestion, and surface modifications by the zooplankton provide insight into novel remediation strategies based on integrated natural community-level approaches. Zooplankton studies are extensive and encompass assessments of their abundance, biomass, distribution, and DNA meta-barcoding. Additionally, zooplankton has been utilized as an indicator in various freshwater environmental policies. Overall, employing zooplankton as an indicator in environmental policies is a vital tool for assessing the health of aquatic ecosystems and can assist in guiding management and conservation efforts. This review summarizes (i) the current literature on the estimation of MP distribution in aquatic environments, (ii) the effects of MP accumulation on the environment and its inhabitants, i.e., the interactions with marine microbiota,, (iii) addresses the bioremediation strategies with an emphasis on microbial degradation, ecological functioning and adaptive responses of marine microbes and finally, (iv) the directions of further research aiming to in situ mitigation of MP pollution. Recent advancements have focused on innovative methods such as membrane bioreactors, synthetic biology, organosilane-based techniques, biofilm-mediated remediation, and nanomaterial-enabled strategies. Nano-enabled technologies show substantial potential to enhance microplastic removal efficiency. Further investigation is necessary to develop advanced treatment technologies that can enhance the removal efficiency of microplastics (MPs) in drinking water. Additionally, more research is needed to understand the toxic impacts of MPs on marine ecosystems, including coral reefs, seagrass beds, mangroves, and other important habitats.

Effects of Enzyme Hydrolysis in Biofilm Formation and Biotic Degradation on Weathered Bioplastics

As efforts to address plastic pollution increase, new avenues are opened for the use of biologically renewable and biodegradable plastics. With the influx of these new polymer systems, it is crucial to understand the degradation processes of these polymers, particularly through disposal systems designed to manage their waste (i.e., compost). This work seeks to characterize a multistep biodegradation system by studying how enzymatic hydrolysis impacts the formation of biofilms upon weathered biodegradable aliphatic polyesters to better understand processes that should occur in composting. Poly l-lactic acid (PLLA), after varying amounts of photochemical weathering, was exposed to the esterase proteinase K followed by exposure to suspended facultative anaerobe, Shewanella oneidensis, whose biofilms were quantified with crystal violet staining. Enzymatic hydrolysis was observed to promote the formation of a biofilm regardless of enzymatic concentration, enzyme exposure time, and state of weathering on the polymer. This trend also held true for a less commercially viable polymer like poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), which was demonstrated to be resistant to enzymatic hydrolysis. Further, we observed that the state of photochemical weathering caused variable impacts to the biodegradation of PLLA. Polymer characterization suggests that while there are changes in crystallinity and surface accessible ester linkages, increased surface area caused by photodegradation and/or enzyme hydrolysis drives the observed trends. Overall, this work demonstrates a multistep biodegradation process is more effective at breaking down biodegradable polymers than a single biotic agent, though polymer weathering influences breakdown to some extent, offering insight into the importance of managing these waste streams to ensure optimal designed biodegradability.

Efficacy of stearic acid, potato starch, and polycaprolactone in the development of pH and temperature-responsive fertilizer for eco-resilient agriculture system

This study investigates the development of a biodegradable, pH- and temperature-responsive controlled-release fertilizer (CRF) using stearic acid, potato starch, and polycaprolactone to enhance nutrient use efficiency and mitigate environmental impacts in agriculture. Conventional fertilizers contribute to significant nutrient losses through leaching and volatilization, leading to pollution and reduced efficiency. In contrast, the proposed CRF gradually releases nutrients in response to environmental stimuli, minimizing nutrient loss and improving sustainability. The study demonstrates that the CRF formulation with 8 % stearic acid and 1 % potato starch exhibits superior nutrient release control under varying temperatures and pH levels, compared to other formulations. Scanning electron microscopy confirmed the structural integrity of the coated granules, while biofilm formation analysis revealed enhanced microbial activity, indicating potential benefits for soil health. The release profile of the CRF was temperature- and pH-dependent, with prolonged nutrient release observed at lower temperatures and acidic conditions. These findings highlight the potential of this eco-friendly CRF to improve crop productivity, reduce fertilizer waste, and support sustainable agricultural practices, presenting a significant advancement for eco-resilient farming systems.

Increasing microplastics pollution: An emerging vector for potentially pathogenic bacteria in the environment

Microplastics (MP), plastic particles <5 mm, are of global concern due to their worldwide distribution and potential repercussions on ecosystems and human well-being. In this study, MP were collected from the urbanized Susurluk basin in Türkiye to evaluate their vector function for bacterial biofilms, both in the wet and dry seasons. Bacterial biofilms were predominantly found on polyethylene (PE), polypropylene (PP), and polystyrene (PS), which constitute the most common MP types in the region. Specific potentially pathogenic bacterial genera, including Pseudomonas sp., Comamonas sp., Salmonella spp., and Shigella spp., were prevalent on MP surfaces. Notably, PE and PP harboured numerous genera of potential human and/or animal origin such as Staphylococcus, Proteus, Escherichia, Enterococcus, and Enterobacter. Water quality played a pivotal role in bacterial biofilm formation on MP. Higher salinity in estuarine areas reduced bacterial abundance on MP, while the more polluted freshwater Nilüfer Stream harboured a higher abundance of total bacteria, particularly of potentially pathogenic strains. Seasonal variations, ambient water conditions, and polymer type are all factors that could influence bacterial colonization on MPs. This catchment-wide evaluation, which includes various habitat types (lentic and lotic systems), the enrichment of cultivable viable bacteria on microplastics (MPs) - a key factor in the spread of pathogens - has significant implications for both environmental and public health. Unlike controlled laboratory experiments or in-situ studies with various particles, this study emphasized the dynamic and complex nature of bacterial strains on MPs, which varied depending on seasonal dynamics and antropogenic impacts in open systems. Further research is needed to thoroughly investigate to fully explore the complex interactions among MPs, microbial communities, and their ecological roles, especially in the context of changing environmental factors across entire river catchments.

Biofilm development as a factor driving the degradation of plasticised marine microplastics

Biodegradation of microplastics facilitated by natural marine biofouling is a promising approach for ocean bioremediation. However, implementation requires a comprehensive understanding of how interactions between the marine microbiome and dominant microplastic debris types (e.g., polymer and additive combinations) can influence biofilm development and drive biodegradation. To investigate this, polystyrene (PS) and polyvinyl chloride (PVC) microplastics (< 200 µm in diameter) were prepared either without any additives (i.e., virgin) or containing 15 wt% of the plasticisers diethylhexyl phthalate (DEHP) or bisphenol A (BPA). Each polymer-plasticiser microplastic combination was exposed to environmentally relevant conditions in a simulated seawater mesocosm representative of tropical reef waters over a 21-day period to allow for natural biofilm development. Following this, microplastic degradation and the colonising bacterial biofilm was assessed as a function of time, polymer and plasticiser type using infrared, thermal, gel permeation and surface characterisation techniques, as well as 16S ribosomal RNA bacterial gene sequencing, respectively. Together, these analyses revealed time-, polymer- and plasticiser-dependent degradation, particularly of the PS-BPA microplastics. Degradation of the PS-BPA microplastics also coincided with changes in bacterial community composition and an increased total relative abundance of putative biodegradative bacteria. These findings indicate that the metabolic potential and biodegradative capability of the colonising marine biofilm can be significantly impacted by the chemical properties of the microplastic substrate, even within short timeframes.

Listeria monocytogenes and Listeriosis: The Global Enigma

Listeria monocytogenes is an intracellular, Gram-positive, non-spore-forming, non-encapsulated, facultative anaerobic, rod-shaped, and psychrotrophic food-borne pathogen that causes the infection, listeriosis, thus it attracts great attention following listeriosis outbreaks, which are often associated with high mortality rates. The prevalence of listeriosis is quite low globally; however, the most recent and deadliest outbreak occurred in South Africa, during which 216 persons lost their lives. L. monocytogenes is endowed with the potential to multiply through a wide range of harsh environmental conditions, forming biofilms on varying surfaces in the food industry, as well as having persistent and antibiotic-resistant cells, which pose a major threat and burden to the ready-to-eat food industry. A more frustrating characteristic of this bacterium is its strain divergence, alongside an increased level of antibiotic resistance registered among the strains of L. monocytogenes recovered from food, humans, and environmental sources, especially to those antibiotics involved in the treatment of human listeriosis. Antibiotic resistance exerted by and among pathogenic food-borne microbes is an ongoing public health menace that continues to be an issue. Against this background, a thorough search into different databases using various search engines was performed, which led to the gathering of salient information that was organised, chronologically, based on Listeria monocytogenes and listeriosis. Altogether, the findings elaborated in this study present up-to date knowledge on different aspects of this pathogen which will improve our understanding of the mystery associated with it and the ways to prevent and control its dissemination through ready-to-eat foods. In addition, constant monitoring of the antibiotic resistance profiles of strains of L. monocytogenes from varying sources detected changes, giving an update on the trend in antibiotic resistance. Overall, monitoring of bacterial contamination serves as the key aspect in the control of the food safety output in the food industry.

Bacillus licheniformis Extracellular Polymeric Substances Conditioning Layer Mediates the Bacterial Adhesion Behaviors toward Controlled Biofilm Formation

In aquatic environments, conditioning layers play a crucial role in modulating the adhesion and aggregation of planktonic bacteria, ultimately facilitating biofilm formation and the irreversible onset of biofouling. This study reports the construction of a simplified conditioning layer using extracellular polymeric substances (EPS) secreted by Bacillus licheniformis and its influence on the adherence behaviors of bacteria. The results reveal that the EPS conditioning layer remarkably inhibits the Staphylococcus aureus adherence yet promotes the aggregation of Escherichia coli. The surface of the EPS conditioning layer shows a flat morphology with the highest height of approximately 12.9 nm. The conditioning layer alters the physicochemical properties of the substrate materials on their surfaces, with water contact angles changing from 61.23° to 8.76° and the zeta potential changing from -1.0 to -25.0 mV. Despite these changes, the overall effect of the EPS conditioning layer on bacterial adhesion was found to be minimal. Further investigation on the bacterial adhesion and aggregation behaviors shows that two main components of EPS, namely, polysaccharides and bacitracin, affect the bacterial adhesion and aggregation behaviors. Bacitracin plays a predominant role in inhibiting the Staphylococcus aureus attachment, and the polysaccharides promote Escherichia coli aggregation. These findings would give inspiring insight into developing environmentally friendly efficient biological measures for combating the worldwide persisting biofouling.

Impact of microplastics on microbial diversity and pathogen distribution in aquaculture ecosystems: A seasonal analysis

Microplastics, as a prominent emerging pollutant in marine environments, pose a serious threat to the stability of marine ecosystems due to their resistance to biodegradation. MPs act as substrates for biofouling and potentially promote the spread of harmful microorganisms. Research indicates that human activities exacerbate MPs pollution in aquaculture environments, significantly increasing their abundance. This study focused on the aquaculture environment of the large yellow croaker (Larimichthys crocea), one of the most extensively farmed fish species in coastal regions. We conducted a comprehensive analysis of microbial diversity on the biofilms covering MPs and in the surrounding aquaculture water, with a focus on the distribution of pathogens on MPs. Furthermore, this study investigated the impact of seasonal variations on the microbial communities within these biofilms. Sequencing analysis revealed that the α-diversity of microbial communities on MPs was lower than that in aquaculture water during winter but higher in summer, indicating a seasonal shift in microbial community structure. PICRUSt predictions suggested that microbes on MPs possess unique metabolic pathways. Co-occurrence network analysis demonstrated that during summer, the microbial communities on MPs revealed increased connectivity and functional modularity, whereas microbial communities in aquaculture water showed stronger interactions in winter. Additionally, several potential pathogens, including Vibrio and Pseudomonas, were detected in the MPs biofilms. These findings underscore the ways in which MPs influence the microbial community structure in aquaculture environments, increasing health risks to the ecosystem. This research offers significant insights into the ecological impacts of MPs pollution on microbial communities in aquaculture ecosystems.

Automated quantitative mineralogy and plastics - A new view of the plastic surface in aquatic environments

Plastics are a ubiquitous pollutant, and are rapidly colonized by biofilms that sorb inorganic and organic components, forming the interface between plastics and the environment. This study provides a proof of concept for the use of automated quantitative mineralogy (AQM) to illuminate and analyse the metal and mineral component of the plastisphere on plastics sampled from temperate and tropical aquatic localities. The method is non-destructive and requires minimal sample preparation, providing a 2-dimensional visualisation and semi-quantitative analysis of the arrangement of biogenic and abiogenic components, highlighting potential interactions between these components. Our results also communicate the potential role of plastic structure on mineral retention in relation to environmental parameters that can influence mechanical degradation. AQM provides a novel avenue to understand the minerals associated with plastics, and increases our knowledge of the interfacial composition, which can inform potential interactions, transformations and insights into the long-term fate of plastic pollutants.

The unseen perils of oral-care products generated micro/nanoplastics on human health

The extensive use of plastics in modern dentistry, including oral care products and dental materials, has raised significant concerns due to the increasing evidence of potential harm to human health and the environment caused by the unintentional release of microplastics (MPs) and nanoplastics (NPs). Particles from sources like toothpaste, toothbrushes, orthodontic implants, and denture materials are generated through mechanical friction, pH changes, and thermal fluctuations. These processes cause surface stress, weaken material integrity, and induce wear, posing health risks such as exposure to harmful monomers and additives, while contributing to environmental contamination. MPs/NPs released during dental procedures can be ingested, leading to immune suppression, tissue fibrosis, and systemic toxicities. The gut epithelium absorbs some particles, while others are excreted, entering ecosystems, accumulating through the food chain, and causing ecological damage. Although analytical techniques have advanced in detecting MPs/NPs in oral care products, more robust methods are needed to understand their release mechanisms. This review explores the prevalence of MPs/NPs in dentistry, the mechanisms by which MPs/NPs are released into the oral environment, and their implications for human and ecological health. It underscores the urgency of public awareness and sustainable dental practices to mitigate these risks and promote environmental well-being.

Viruses in the era of microplastics and plastispheres: Analytical methods, advances and future directions

Research on microplastics and plastispheres now incorporates the study of viruses to evaluate their effects on the environment and human health. Sharing these new discoveries with the scientific community is crucial to fostering further research and collaborations. However, the current research and methodologies used are fragmented. To address this issue, this paper reviews the literature and the use of methodology developments in each study, identifying four emerging research areas: (1) viral interactions with microplastics; (2) viral population, diversity, and function in plastispheres; (3) the effects of viruses and plastic particles in host-associated environments; and (4) the impacts of viruses within plastispheres. To that end, the article is structured to streamline navigation and help readers easily access existing approaches, recent advancements, key findings, challenges, and opportunities in these areas. Our synthesis reveals that research methods include biochemical assays, omics techniques, spectroscopic analysis, and molecular and bioinformatic tools. Various mechanisms enable viruses to attach to microplastics and plastispheres, leading to widespread distribution and contributing to toxic effects and gene transfer. While the growing evidence is intriguing, there is still much to uncover about their ecological interactions, functions, and impacts.

Effect of shear rate on early Shewanella oneidensis adhesion dynamics monitored by deep learning

Understanding pioneer bacterial adhesion is essential to appreciate bacterial colonization and consider appropriate control strategies. This bacterial entrapment at the wall is known to be controlled by many physical, chemical or biological factors, including hydrodynamic conditions. However, due to the nature of early bacterial adhesion, i.e. a short and dynamic process with low biomass involved, such investigations are challenging. In this context, our study aimed to evaluate the effect of wall shear rate on the early bacterial adhesion dynamics. Firstly, at the population scale by assessing bacterial colonization kinetics and the mechanisms responsible for wall transfer under shear rates using a time-lapse approach. Secondly, at the individual scale, by implementing an automated image processing method based on deep learning to track each individual pioneer bacterium on the wall. Bacterial adhesion experiments are performed on a model bacterium (Shewanella oneidensis MR-1) at different shear rates (0 to1250 s-1) in a microfluidic system mounted under a microscope equipped with a CCD camera. Image processing was performed using a trained neural network (YOLOv8), which allowed information extraction, i.e. bacterial wall residence time and orientation for each adhered bacterium during pioneer colonization (14 min). Collected from over 20,000 bacteria, our results showed that adhered bacteria had a very short residence time at the wall, with over 70 % remaining less than 1 min. Shear rates had a non-proportional effect on pioneer colonization with a bell-shape profile suggesting that intermediate shear rates improved both bacterial wall residence time as well as colonization rate and level. This lack of proportionality highlights the dual effect of wall shear rate on early bacterial colonization; initially increasing it improves bacterial colonization up to a threshold, beyond which it leads to higher bacterial wall detachment. The present study provides quantitative data on the individual dynamics of just adhered bacteria within a population when exposed to different rates of wall shear.

Heterogenous bioluminescence patterns, cell viability, and biofilm formation of Photobacterium leiognathi strains exposed to ground microplastics

Microplastics (MPs) have been detected in various aquatic environments and negatively affect organisms, including marine luminous bacteria. This study investigated the differences in bioluminescence patterns, cell viability, and biofilm formation of Photobacterium leiognathi strains (LB01 and LB09) when exposed to various concentrations of ground microplastics (GMPs; 0.25%, 0.50%, 1%, or 2% [w/v] per mL) at 22°C or 30°C for 3.1 days (75 h) and 7 days. The strains exhibited heterogenous responses, including variable bioluminescence patterns, cell viability, and biofilm formation, due to the GMPs having effects such as hormesis and bioluminescence quenching. Moreover, the bioluminescence and cell viability differed between the two strains, possibly involving distinct cellular mechanisms, suggesting that GMPs affect factors that influence quorum sensing. Furthermore, the biofilm formation of LB01 and LB09 was observed following exposure to GMPs. Both strains showed increased biofilm formation at higher GMP concentrations (1% and 2%) after 3.1 days at 30°C and 22°C. However, in the 7-day experiment, LB01 significantly (p < 0.05) increased biofilms at 22°C, while LB09 significantly (p < 0.05) produced biofilms at 30°C. These findings highlight the strain-specific responses of Phb. leiognathi to MP pollutants. Therefore, this study underscores the importance of evaluating MPs as environmental stressors on marine microorganisms and their role in the ecophysiological repercussions of plastic pollution in aquatic environments.

Plastic-degrading microbial communities reveal novel microorganisms, pathways, and biocatalysts for polymer degradation and bioplastic production

Plastics derived from fossil fuels are used ubiquitously owing to their exceptional physicochemical characteristics. However, the extensive and short-term use of plastics has caused environmental challenges. The biotechnological plastic conversion can help address the challenges related to plastic pollution, offering sustainable alternatives that can operate using bioeconomic concepts and promote socioeconomic benefits. In this context, using soil from a plastic-contaminated landfill, two consortia were established (ConsPlastic-A and -B) displaying versatility in developing and consuming polyethylene or polyethylene terephthalate as the carbon source of nutrition. The ConsPlastic-A and -B metagenomic sequencing, taxonomic profiling, and the reconstruction of 79 draft bacterial genomes significantly expanded the knowledge of plastic-degrading microorganisms and enzymes, disclosing novel taxonomic groups associated with polymer degradation. The microbial consortium was utilized to obtain a novel Pseudomonas putida strain (BR4), presenting a striking metabolic arsenal for aromatic compound degradation and assimilation, confirmed by genomic analyses. The BR4 displays the inherent capacity to degrade polyethylene terephthalate (PET) and produce polyhydroxybutyrate (PHB) containing hydroxyvalerate (HV) units that contribute to enhanced copolymer properties, such as increased flexibility and resistance to breakage, compared with pure PHB. Therefore, BR4 is a promising strain for developing a bioconsolidated plastic depolymerization and upcycling process. Collectively, our study provides insights that may extend beyond the artificial ecosystems established during our experiments and supports future strategies for effectively decomposing and valorizing plastic waste. Furthermore, the functional genomic analysis described herein serves as a valuable guide for elucidating the genetic potential of microbial communities and microorganisms in plastic deconstruction and upcycling.

Taxonomic variation, plastic degradation, and antibiotic resistance traits of plastisphere communities in the maturation pond of a wastewater treatment plant

Wastewater treatment facilities can filter out some plastics before they reach the open environment, yet microplastics often persist throughout these systems. As they age, microplastics in wastewater may both leach and sorb pollutants and fragment to provide an increased surface area for bacterial attachment and conjugation, possibly impacting antimicrobial resistance (AMR) traits. Despite this, little is known about the effects of persistent plastic pollution on microbial functioning. To address this knowledge gap, we deployed five different artificially weathered plastic types and a glass control into the final maturation pond of a municipal wastewater treatment plant in Ōtautahi-Christchurch, Aotearoa/New Zealand. We sampled the plastic-associated biofilms (plastisphere) at 2, 6, 26, and 52 weeks, along with the ambient pond water, at three different depths (20, 40, and 60 cm from the pond water surface). We investigated the changes in plastisphere microbial diversity and functional potential through metagenomic sequencing. Bacterial 16S ribosomal RNA genes composition did not vary among plastic types and glass controls (P = 0.997) but varied among sampling times [permutational multivariate analysis of variance (PERMANOVA), P = 0.001] and depths (PERMANOVA, P = 0.011). Overall, there was no polymer-substrate specificity evident in the total composition of genes (PERMANOVA, P = 0.67), but sampling time (PERMANOVA, P = 0.002) and depth were significant factors (PERMANOVA, P = 0.001). The plastisphere housed diverse AMR gene families, potentially influenced by biofilm-meditated conjugation. The plastisphere also harbored an increased abundance of genes associated with the biodegradation of nylon, or nylon-associated substances, including nylon oligomer-degrading enzymes and hydrolases.IMPORTANCEPlastic pollution is pervasive and ubiquitous. Occurrences of plastics causing entanglement or ingestion, the leaching of toxic additives and persistent organic pollutants from environmental plastics, and their consequences for marine macrofauna are widely reported. However, little is known about the effects of persistent plastic pollution on microbial functioning. Shotgun metagenomics sequencing provides us with the necessary tools to examine broad-scale community functioning to further investigate how plastics influence microbial communities. This study provides insight into the functional consequence of continued exposure to waste plastic by comparing the prokaryotic functional potential of biofilms on five types of plastic [linear low-density polyethylene (LLDPE), nylon-6, polyethylene terephthalate, polylactic acid, and oxygen-degradable LLDPE], glass, and ambient pond water over 12 months and at different depths (20, 40, and 60 cm) within a tertiary maturation pond of a municipal wastewater treatment plant.

Effects of Vibrio vulnificus and Microcystis aeruginosa co-exposures on microplastic accumulation and depuration in the Eastern Oyster (Crassostrea virginica)

Microplastics are ubiquitous in the aquatic environment, and bivalves such as the Eastern oyster (Crassostrea virginica) can accumulate these particles directly from the water column. Bivalves are concurrently exposed to pathogenic and toxin-producing bacteria, including Vibrio spp. and Microcystis spp., which have been shown to adversely impact filtration rates. Exposure to these bacteria could thus affect oysters' ability to accumulate and depurate microplastics. As climate change creates conditions that favor Vibrio spp. and Microcystis spp. growth in estuaries, it is increasingly important to understand how these co-occurring biotic stressors influence microplastic contamination in bivalves. The objective of this study was to examine how co-exposures to Vibrio vulnificus and Microcystis aeruginosa influence microplastic accumulation and depuration in Eastern oysters. Oysters were exposed to nylon microplastics (5000 particles L-1) and either V. vulnificus, M. aeruginosa, or both species (104 colony-forming units or cells mL-1, respectively) and sampled over time up to 96 h. Following exposure, remaining oysters were allowed to depurate in clean seawater and sampled over time for up to 96 h. Microplastic concentrations in oysters were quantified and compared among treatments, and rate constants for uptake (ku) and depuration (kd) were calculated using nonlinear regression and two-compartment kinetic models. Overall, microplastic concentrations in oysters exposed to V. vulnificus (X‾ = 2.885 ± 0.350 (SE) particles g-1 w.w.) and V. vulnificus with M. aeruginosa (X‾ = 3.089 ± 0.481 particles g-1 w.w.) were higher than oysters exposed to M. aeruginosa (X‾ = 1.540 ± 0.235 particles g-1 w.w.) and to microplastics alone (X‾ = 1.599 ± 0.208 particles g-1 w.w.). Characterizing microplastic accumulation and depuration in oysters co-exposed to these biotic stressors is an important first step in understanding how contaminant loads in bivalves can change. With this research, the efficacy of depuration for commonly-consumed seafood species can be estimated.

Bacterial Degradation of Low-Density Polyethylene Preferentially Targets the Amorphous Regions of the Polymer

Low-density polyethylene (LDPE) is among the most abundant synthetic plastics in the world, contributing significantly to the plastic waste accumulation problem. A variety of microorganisms, such as Cupriavidus necator H16, Pseudomonas putida LS46, and Pseudomonas chlororaphis PA2361, can form biofilms on the surface of LDPE polymers and cause damage to the exterior structure. However, the damage is not extensive and complete degradation has not been achieved. The changes in polymer structure were analyzed using Time-domain Nuclear Magnetic Resonance (TD-NMR), High-Temperature Size-Exclusion Chromatography (HT-SEC), Differential Scanning Calorimetry (DSC), and Gas Chromatography with a Flame Ionization Detector (GC-FID). Limited degradation of the LDPE powder was seen in the first 30 days of incubation with the bacteria. Degradation can be seen in the LDPE weight loss percentage, LDPE degradation products in the supernatant, and the decrease in the percentage of amorphous regions (from >47% to 40%). The changes in weight-average molar mass (Mw), number-average molar mass (Mn), and the dispersity ratio (Đ) indicate that the low-molar mass fractions of the LDPE were preferentially degraded. The results here confirmed that LDPE degradation is heavily dependent on the presence of amorphous content and that only the amorphous content was degraded via bacterial enzymatic action.

Dynamics of drinking water biofilm formation associated with Legionella spp. colonization

Understanding how Legionella spp. proliferate in multispecies biofilms is essential to develop strategies to control their presence in building plumbing. Here, we analyzed biofilm formation and Legionella spp. colonization on new plumbing material during 8 weeks. Biofilm formation was characterized by an initial increase in intact cell concentrations up to 9.5 × 105 cells/cm2, followed by a steady decrease. We identified Comamonas, Caulobacter, Schlegella, Blastomonas and Methyloversatilis as pioneer genera in the biofilm formation process. Importantly, L. pneumophila was the dominant Legionella spp. and rapidly colonized the biofilms, with culturable cell concentrations peaking at 3.1 × 104 MPN/cm2 after 4 weeks already. Moreover, several Legionella species co-occurred and had distinct dynamics of biofilm colonization. Vermamoeba vermiformis (V. vermiformis) was the dominant protist identified with 18S rRNA gene amplicon sequencing. Together our results highlight that biofilm formation upon introduction of new building plumbing material is a dynamic process where pathogenic Legionella species can be part of the earliest colonizers.

Plastic Debris in the Aquatic Environment: An Emerging Substratum for Antimicrobial Resistant (AMR) Biofilms

Plastic pollution has quadrupled over the past years and has become a global concern due to its direct impact on life forms. The present study analysed whether the plastic debris in aquatic environments could act as the substratum for the antimicrobial-resistant (AMR) bacteria to form biofilm for survival. We have collected various plastic debris (n = 32) from six sites of the Periyar River, the drinking water source for the entire city and one of the most polluted rivers in Kerala (India). The chemical composition of plastics was screened via FTIR analysis and found that they comprised two types, viz., polyethylene and polypropylene. Bacteria isolated from the samples were screened for the AMR characteristics towards eight different classes of antibiotics. All isolates showed 100% resistance towards colistin and obtained the MAR index value of 0.1-0.4 range. Six representative bacterial isolates with high multiple antibiotic resistance (MAR) index were selected and identified by 16sRNA sequencing as Lysinibacillus mangiferihumi, Bacillus pumilus, Bacillus safensis, Bacillus cereus, Bacillus altitudins and Bacillus pumilus. In vitro biofilm formation was experimented on the purchased plastic samples in artificial media and river water using two selected strains, Bacillus pumilus and Bacillus cereus. Significant variations were observed in biofilm growth in different media (P < 0.05) regardless of plastic types (P > 0.05). The extracellular polymeric substances (EPS) and the characteristic holes on the surface morphology were visualized in SEM analysis, thus indicating the conditioning of the plastics by the isolates for biofilm formation.

A closer look at plastic colonisation: Prokaryotic dynamics in established versus newly synthesised marine plastispheres and their planktonic state

The taxonomy of marine plastisphere communities has been extensively studied, demonstrating the ubiquity of hydrocarbonoclastic bacteria of potential biotechnological significance. However, prokaryotic functioning on plastic surfaces has received limited attention, and the question of whether these microorganisms are active and expressing specific molecular mechanisms underpinning plastisphere colonisation remains to be addressed. The aim of this study was to investigate the plastic colonisation process, to identify the active taxa involved in biofilm formation and the mechanisms used to initiate colonisation. To achieve this, a marine plastisphere characterised by active hydrocarbonoclastic genera was used as the inoculum for a short-term microcosm experiment using virgin low-density polyethylene as the sole carbon source. Following incubation for 1 and 2 weeks (representing early and late colonisation, respectively), a taxonomic and comparative metaproteomic approach revealed a significant shift in plastisphere diversity and composition, yet highlighted stability in the predominance of active Proteobacteria spanning 16 genera, including Marinomonas, Pseudomonas, and Pseudoalteromonas. Relative quantification of 1762 proteins shared between the initial plastisphere inoculum, the microcosm plastisphere and the planktonic cells in the surrounding artificial seawater, provided insights into the differential regulation of proteins associated with plastisphere formation. This included the upregulation of proteins mediating cellular attachment in the plastisphere, for example flagellin expressed by Marinomonas, Cobetia, Pseudoalteromonas, and Pseudomonas, and curli expressed by Cobetia. In addition to the differential regulation of energy metabolism in Marinomonas, Psychrobacter, Pseudomonas and Cobetia within the plastisphere relative to the surrounding seawater. Further, we identified the upregulation of amino acid metabolism and transport, including glutamine hydrolysis to glutamate in Marinomonas and unclassified Halomonadaceae, potentially coupled to ammonia availability and oxidative stress experienced within the plastisphere. Our study provides novel insights into the dynamics of plastisphere formation and function, highlighting potential targets for regulating plastisphere growth to enhance plastic bioremediation processes.

An integrated approach for plastic polymer degradation by the gut bacterial resident of superworm, Zophobas morio (Coleoptera:Tenebrionidae)

The potential of superworm to remove certain plastic polymers has recently been noted. In this study, aerobic bacterial strains were isolated from the gut of Zophobas morio larvae which were fed with polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP), and polystyrene (PS) polymers. Strains P2 (Leminorella), P6 (Bacillus), P9 (Bacillus), and P5 (Citrobacter) were associated with the highest PS (2.7%), PP (1.3%), PET (1.1%), and PE (0.42%) weight loss after 28 days, respectively. Pretreatments including thermal treatment (80 °C for 10 days), weathering (4 months in the free environment), and nitric and sulfuric acids (1 N, 10 days) improved the degradation of PE (1.3%), PET (1.9%), PP (5.2%), and PS (8.3%) by the same strains, respectively. Further analyses on the PS degradation by Leminorella sp. P2 revealed acid pretreatment promoted the formation of the C = C, C = O, and O-H functional groups. Surface irregularities, as well as a 3.6-fold increase in surface roughness, were observed in the PS film subjected to biodegradation. The contact angle dropped from 98.4° to 42.2° following the biodegradation. Bacterial depolymerization was confirmed by the 8.7% and 3.4% reduction of Mn and Mw and the change in polydispersity from 1.65 to 1.75. The results suggest that Zophobas morio microbiota in combination with abiotic pretreatment can be considered for plastic waste management.

Colonization characteristics and surface effects of microplastic biofilms: Implications for environmental behavior of typical pollutants

This paper summarizes the colonization dynamics of biofilms on microplastics (MPs) surfaces in aquatic environments, encompassing bacterial characteristics, environmental factors affecting biofilm formation, and matrix types and characteristics. The interaction between biofilm and MPs was also discussed. Through summarizing recent literatures, it was found that MPs surfaces offer numerous benefits to microorganisms, including nutrient enrichment and enhanced resistance to environmental stress. Biofilm colonization changes the surface physical and chemical properties as well as the transport behavior of MPs. At the same time, biofilms also play an important role in the fragmentation and degradation of MPs. In addition, we also investigated the coexistence level, adsorption mechanism, enrichment, and transformation of MPs by environmental pollutants mediated by biofilms. Moreover, an interesting aspect about the colonization of biofilms was discussed. Biofilm colonization not only had a great effect on the accumulation of heavy metals by MPs, but also affects the interaction between particles and environmental pollutants, thereby changing their toxic effects and increasing the difficulty of MPs treatment. Consequently, further attention and research are warranted to delve into the internal mechanisms, environmental risks, and the control of the coexistence of MPs and biofilms.

Factors affecting biofilm formation by bacteria on fabrics

Fabrics act as fomites for microorganisms, thereby playing a significant role in infection transmission, especially in the healthcare and hospitality sectors. This study aimed to examine the biofilm formation ability of four nosocomial infection-causing bacteria (Acinetobacter calcoaceticus, Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus) on cotton, polyester, polyester-cotton blend, silk, wool, viscose, and nylon, used frequently in the healthcare sector, by qualitative and quantitative methods. The impact of temperature, pH, and relative humidity (RH) on biofilm formation was also assessed. P. aeruginosa and S. aureus were strong biofilm producers, while E. coli produced weak biofilm. Wool (maximum roughness) showed the highest bacterial load, while silk (lowest roughness) showed the least. P. aeruginosa exhibited a higher load on all fabrics, than other test bacteria. Extracellular polymeric substances were characterized by infrared spectroscopy. Roughness of biofilms was assessed by atomic force microscopy. For biofilm formation, optimum temperature, pH, and RH were 30 °C, 7.0, and 62%, respectively. MgCl2 and CaCl2 were the most effective in removing bacterial biofilm. In conclusion, biofilm formation was observed to be influenced by the type of fabric, bacteria, and environmental conditions. Implementing recommended guidelines for the effective disinfection of fabrics is crucial to curb the risk of nosocomial infections. In addition, designing modified healthcare fabrics that inhibit pathogen load could be an effective method to mitigate the transmission of infections.

Effects of marine eutrophication environment on microbial corrosion: A review

Metal materials undergo severe corrosion in eutrophic environments. The effect of DO decay stimulated by high concentrations of nitrogen and phosphorus pollutants on microorganisms leads to the coupling of electrochemical and microbial corrosion processes. However, there are few studies on microbial corrosion mechanisms in eutrophic environments. This article discusses the corrosive factors of marine eutrophication, summarizes the impact of marine eutrophication on microbial corrosion and the potential mechanisms, including aerobic biofilm corrosion, aerobic & anaerobic mixed biofilm corrosion, and anaerobic microbial electron transfer corrosion, and expounds on the research methods for microbial corrosion of materials serving in estuarine areas prone to pollution. Microbial prevention and control, such as nutrient restriction and microbial interspecies competition, are of research value in the field of green protection. Microbial corrosion mechanisms studies in marine eutrophication environments are significant for environment monitor development, water intake and algae control technologies, and corrosion protection in polluted environments.

Engineered plastic-associated bacteria for biodegradation and bioremediation

The global plastic waste crisis has triggered the development of novel methods for removal of recalcitrant polymers from the environment. Biotechnological approaches have received particular attention due to their potential for enabling sustainable, low-intensity bioprocesses which could also be interfaced with microbial upcycling pathways to support the emerging circular bioeconomy. However, low biodegradation efficiency of solid plastic materials remains a bottleneck, especially at mesophilic conditions required for one-pot degradation and upcycling. A promising strategy used in nature to address this is localisation of plastic-degrading microbes to the plastic surface via biofilm-mediated surface association. This review highlights progress and opportunities in leveraging these naturally occurring mechanisms of biofilm formation and other cell-surface adhesion biotechnologies to co-localise engineered cells to plastic surfaces. We further discuss examples of combining these approaches with extracellular expression of plastic-degrading enzymes to accelerate plastic degradation. Additionally, we review this topic in the context of nano- and microplastics bioremediation and their removal from wastewater and finally propose future research directions for this nascent field.

Fabric Fiber as a Biofilm Carrier for Halomonas sp. H09 Mixed with Lactobacillus rhamnosus GG

Biofilm bacteria have stronger resistance to the adverse external environment compared to planktonic bacteria, and biofilms of non-pathogenic bacteria have strong potential for applications in food. In this experiment, Halomonas sp. H09 and Lactobacillus rhamnosus GG, which have film-forming ability in monoculture and better film-forming ability in mixed culture than the two strains alone, were selected as the target strains for mixed culture. According to SEM observation and bacterial dry weight measurement, the target strain formed a dense biofilm on a 0.1 g/L chitosan-modified cellulose III carrier. Furthermore, the presence of extracellular polymeric substances in biofilms was verified by EDS and FTIR. The results showed that 0.1 g/L chitosan-modified cellulose III was an ideal carrier material for immobilization of Halomonas sp. H09 with Lactobacillus rhamnosus GG biofilm. This research provided a basis for the selection of non-pathogenic mixed-bacteria biofilm carriers.

Microbial Biofilms: Features of Formation and Potential for Use in Bioelectrochemical Devices

Microbial biofilms present one of the most widespread forms of life on Earth. The formation of microbial communities on various surfaces presents a major challenge in a variety of fields, including medicine, the food industry, shipping, etc. At the same time, this process can also be used for the benefit of humans-in bioremediation, wastewater treatment, and various biotechnological processes. The main direction of using electroactive microbial biofilms is their incorporation into the composition of biosensor and biofuel cells This review examines the fundamental knowledge acquired about the structure and formation of biofilms, the properties they have when used in bioelectrochemical devices, and the characteristics of the formation of these structures on different surfaces. Special attention is given to the potential of applying the latest advances in genetic engineering in order to improve the performance of microbial biofilm-based devices and to regulate the processes that take place within them. Finally, we highlight possible ways of dealing with the drawbacks of using biofilms in the creation of highly efficient biosensors and biofuel cells.

Critical analysis of methods to determine growth, control and analysis of biofilms for potential non-submerged antibiofilm surfaces and coatings

The potential uses for antibiofilm surfaces reach across different sectors with significant resultant economic, societal and health impact. For those interested in using antibiofilm surfaces in the built environment, it is important that efficacy testing methods are relevant, reproducible and standardised where possible, to ensure data outputs are applicable to end-use, and comparable across the literature. Using pre-defined keywords, a review of literature reporting on antimicrobial surfaces (78 articles), within which a potential application was described as non-submerged/non-medical surface or coating with antibiofilm action, was undertaken. The most used methods utilized the growth of biofilm in submerged and static systems. Quantification varied (from most to least commonly used) across colony forming unit counts, non-microscopy fluorescence or spectroscopy, microscopy analysis, direct agar-contact, sequencing, and ELISA. Selection of growth media, microbial species, and incubation temperature also varied. In many cases, definitions of biofilm and attempts to quantify antibiofilm activity were absent or vague. Assessing a surface after biofilm recovery or assessing potential regrowth of a biofilm after initial analysis was almost entirely absent. It is clear the field would benefit from widely agreed and adopted approaches or guidance on how to select and incorporate end-use specific conditions, alongside minimum reporting guidelines may benefit the literature.

Exploring plastic biofilm formation and Escherichia coli colonisation in marine environments

Microorganisms, including potential pathogens, can colonise plastic surfaces in aquatic environments. This study investigates the colonisation of plastic pellets by Escherichia coli (E. coli) as a proxy for faecal pathogens in aquatic environments. Plastic pellets from a polluted beach were placed in seawater aquaria spiked with E. coli. Diverse bacteria, primarily from the Proteobacteria phylum, rapidly colonised the pellets within 24 h, with notable species known for plastic or hydrocarbon degradation. Over 26 days, biofilms formed on the plastic surfaces, reaching bacterial populations of up to 6.8·105 gene copies (gc) of the 16S rRNA mm-2. E. coli, was detected in the pellets for up to 7 days using culture methods, exhibiting varying attachment densities regardless of source or environmental factors. The study highlights plastic biofilms as reservoirs for E. coli, contributing to the survival and persistence of faecal bacteria in aquatic systems. These findings deepen our understanding of the risks associated with plastic pollution in marine settings, offering insights into the behaviour of faecal indicators and their implications for water quality assessments, while providing valuable information on potential pathogen dissemination within plastic-associated microbial communities.

Cyclic olefin copolymer (COC) as a promising biomaterial for affecting bacterial colonization: investigation on Vibrio campbellii

Cyclic olefin copolymer (COC) has emerged as an interesting biocompatible material for Organ-on-a-Chip (OoC) devices monitoring growth, viability, and metabolism of cells. Despite ISO 10993 approval, systematic investigation of bacteria grown onto COC is a still not documented issue. This study discusses biofilm formations of the canonical wild type BB120 Vibrio campbellii strain on a native COC substrate and addresses the impact of the physico-chemical properties of COC compared to conventional hydroxyapatite (HA) and poly(dimethylsiloxane) (PDMS) surfaces. An interdisciplinary approach combining bacterial colony counting, light microscopy imaging and advanced digital image processing remarks interesting results. First, COC can reduce biomass adhesion with respect to common biopolymers, that is suitable for tuning biofilm formations in the biological and medical areas. Second, remarkably different biofilm morphology (dendritic complex patterns only in the case of COC) was observed among the examined substrates. Third, the observed biofilm morphogenesis was related to the interaction of COC with the conditioning layer of the planktonic biological medium. Fourth, Level Co-occurrence Matrix (CGLM)-based analysis enabled quantitative assessment of the biomass textural fractal development under different coverage conditions. All of this is of key practical relevance in searching innovative biocompatible materials for pharmaceutical, implantable and medical products.

Evaluating the antibacterial efficacy of a silver nanocomposite surface coating against nosocomial pathogens as an antibiofilm strategy to prevent hospital infections

Antimicrobial nanocoatings may be a means of preventing nosocomial infections, which account for significant morbidity and mortality. The role of hospital sink traps in these infections is also increasingly appreciated. We describe the preparation, material characterization and antibacterial activity of a pipe cement-based silver nanocoating applied to unplasticized polyvinyl chloride, a material widely used in wastewater plumbing. Three-dimensional surface topography imaging and scanning electron microscopy showed increased roughness in all surface finishes versus control, with grinding producing the roughest surfaces. Silver stability within nanocoatings was >99.89% in deionized water and bacteriological media seeded with bacteria. The nanocoating exhibited potent antibiofilm (99.82-100% inhibition) and antiplanktonic (99.59-99.99% killing) activity against three representative bacterial species and a microbial community recovered from hospital sink traps. Hospital sink trap microbiota were characterized by sequencing the 16S rRNA gene, revealing the presence of opportunistic pathogens from genera including Pseudomonas, Enterobacter and Clostridioides. In a benchtop model sink trap system, nanocoating antibiofilm activity against this community remained significant after 11 days but waned following 25 days. Silver nanocoated disks in real-world sink traps in two university buildings had a limited antibiofilm effect, even though in vitro experiments using microbial communities recovered from the same traps demonstrated that the nanocoating was effective, reducing biofilm formation by >99.6% and killing >98% of planktonic bacteria. We propose that conditioning films forming in the complex conditions of real-world sink traps negatively impact nanocoating performance, which may have wider relevance to development of antimicrobial nanocoatings that are not tested in the real-world.

Diversity of marine bacteria growing on leachates from virgin and weathered plastic: Insights into potential degraders

Plastic debris in the ocean releases chemical compounds that can be toxic to marine fauna. It was recently found that some marine bacteria can degrade such leachates, but information on the diversity of these bacteria is mostly lacking. In this study, we analysed the bacterial diversity growing on leachates from new low-density polyethylene (LDPE) and a mix of naturally weathered plastic, collected from beach sand. We used a combination of Catalysed Reporter Deposition-Fluorescence In Situ Hybridization (CARD-FISH), BioOrthogonal Non-Canonical Amino acid Tagging (BONCAT), and 16S rRNA gene amplicon sequencing to analyse bacterioplankton-groups specific activity responses and the identity of the responsive taxa to plastic leachates produced under irradiated and non-irradiated conditions. We found that some generalist taxa responded to all leachates, most of them belonging to the Alteromonadales, Oceanospirillales, Nitrosococcales, Rhodobacterales, and Sphingomonadales orders. However, there were also non-generalist taxa responding to specific irradiated and non-irradiated leachates. Our results provide information about bacterial taxa that could be potentially used to degrade the chemicals released during plastic degradation into seawater contributing to its bioremediation.

The Role of Metallurgical Features in the Microbially Influenced Corrosion of Carbon Steel: A Critical Review

Microbially influenced corrosion (MIC) is a potentially critical degradation mechanism for a wide range of materials exposed to environments that contain relevant microorganisms. The likelihood and rate of MIC are affected by microbiological, chemical, and metallurgical factors; hence, the understanding of the mechanisms involved, verification of the presence of MIC, and the development of mitigation methods require a multidisciplinary approach. Much of the recent focus in MIC research has been on the microbiological and chemical aspects, with less attention given to metallurgical attributes. Here, we address this knowledge gap by providing a critical synthesis of the literature on the metallurgical aspects of MIC of carbon steel, a material frequently associated with MIC failures and widely used in construction and infrastructure globally. The article begins by introducing the process of MIC, then progresses to explore the complexities of various metallurgical factors relevant to MIC in carbon steel. These factors include chemical composition, grain size, grain boundaries, microstructural phases, inclusions, and welds, highlighting their potential influence on MIC processes. This review systematically presents key discoveries, trends, and the limitations of prior research, offering some novel insights into the impact of metallurgical factors on MIC, particularly for the benefit of those already familiar with other aspects of MIC. The article concludes with recommendations for documenting metallurgical data in MIC research. An appreciation of relevant metallurgical attributes is essential for a critical assessment of a material's vulnerability to MIC to advance research practices and to broaden the collective knowledge in this rapidly evolving area of study.

Protein-Based Rechargeable and Replaceable Antimicrobial and Antifouling Coatings on Hydrophobic Food-Contact Surfaces

The growing concerns regarding foodborne illnesses related to fresh produce accentuate the necessity for innovative material solutions, particularly on surfaces that come into close contact with foods. This study introduces a sustainable, efficient, and removable antimicrobial and antifouling coating ideally suited for hydrophobic food-contact surfaces such as low-density polyethylene (LDPE). Developed through a crosslinking reaction involving tannic acid, gelatin, and soy protein hydrolysate, these coatings exhibit proper stability in aqueous washing solutions and effectively combat bacterial contamination and prevent biofilm formation. The unique surface architecture promotes the formation of halamine structures, enhancing antimicrobial efficacy with a rapid contact killing effect and reducing microbial contamination by up to 5 log10 cfu·cm-2 against both Escherichia coli (Gram-negative) and Listeria innocua (Gram-positive). Notably, the coatings are designed for at least five recharging cycles under mild conditions (pH6, 20 ppm free active chlorine) and can be easily removed with hot water or steam to refresh the depositions. This removal process not only conveniently aligns with existing sanitation protocols in the fresh produce industry but also facilitates the complete eradication of potential developed biofilms, outperforming uncoated LDPE coupons. Overall, these coatings represent sustainable, cost-effective, and practical advancements in food safety and are promising candidates for widespread adoption in food processing environments.

Microplastisphere antibiotic resistance genes: A bird's-eye view on the plastic-specific diversity and enrichment

The microplastisphere is a dense consortium of metabolically active microorganisms that develops on the surface of microplastics. Since the discovery that it harbors antibiotic resistance genes (ARGs), there has been a quest to decipher the relationship between ARG occurrences and selective enrichment with plastic types, which is important to understand their fate in diverse environmental settings. Nonetheless, it remains a neglected topic, and this developing field of microplastics research could benefit from a comprehensive review to acquire a deeper understanding of the most recent advances and drive scientific progress. Accordingly, the goal of this review is to critically discuss and provide an in-depth assessment of the evidence of ARGs' global nature in microplastispheres, as well as explore factors that influence them directly and indirectly, highlighting important concerns and knowledge gaps throughout the article. By comprehensively covering them, we underscore the potential environmental implications associated with microplastisphere ARGs. From our analysis, it emerged that microplastisphere ARGs are likely to be impacted not only by differences in microplastic types and characteristics but also by how their environments are shaped by other agents such as physiochemical properties, socioeconomic factors, and contaminants coexistence, influencing ARG subtype, incidence, abundance, and selective enrichment. The intricate relationship of microplastisphere ARGs to environmental conditions and plastic types calls for multilevel investigations to clearly assess the environmental fate of microplastics. We anticipate that this review could assist researchers in strengthening their foundation and identifying efforts to advance knowledge in this research field.

Multi-Technique Characterization of 3.45 Ga Microfossils on Earth: A Key Approach to Detect Possible Traces of Life in Returned Samples from Mars

The NASA Mars 2020 Perseverance rover is actively exploring Jezero crater to conduct analyses on igneous and sedimentary rock targets from outcrops located on the crater floor (Máaz and Séítah formations) and from the delta deposits, respectively. The rock samples collected during this mission will be recovered during the Mars Sample Return mission, which plans to bring samples back to Earth in the 2030s to conduct in-depth studies using sophisticated laboratory instrumentation. Some of these samples may contain traces of ancient martian life that may be particularly difficult to detect and characterize because of their morphological simplicity and subtle biogeochemical expressions. Using the volcanic sediments of the 3.45 Ga Kitty's Gap Chert (Pilbara, Australia), containing putative early life forms (chemolithotrophs) and considered as astrobiological analogues for potential early Mars organisms, we document the steps required to demonstrate the syngenicity and biogenicity of such biosignatures using multiple complementary analytical techniques to provide information at different scales of observation. These include sedimentological, petrological, mineralogical, and geochemical analyses to demonstrate macro- to microscale habitability. New approaches, some unavailable at the time of the original description of these features, are used to verify the syngenicity and biogenicity of the purported fossil chemolithotrophs. The combination of elemental (proton-induced X-ray emission spectrometry) and molecular (deep-ultraviolet and Fourier transform infrared) analyses of rock slabs, thin sections, and focused ion beam sections reveals that the carbonaceous matter present in the samples is enriched in trace metals (e.g., V, Cr, Fe, Co) and is associated with aromatic and aliphatic molecules, which strongly support its biological origin. Transmission electron microscopy observations of the carbonaceous matter documented an amorphous nanostructure interpreted to correspond to the degraded remains of microorganisms and their by-products (extracellular polymeric substances, filaments…). Nevertheless, a small fraction of carbonaceous particles has signatures that are more metamorphosed. They probably represent either reworked detrital biological or abiotic fragments of mantle origin. This study serves as an example of the analytical protocol that would be needed to optimize the detection of fossil traces of life in martian rocks.

Catalyst-Free Amino-Yne Click Reaction: An Efficient Way for Immobilizing Amoxicillin onto Polymeric Surfaces

Surface modifications play a crucial role in enhancing the functionality of biomaterials. Different approaches can be followed in order to achieve the bioconjugation of drugs and biological compounds onto polymer surfaces. In this study, we focused on the immobilization of an amoxicillin antibiotic onto the surface of poly-L-lactic acid (PLLA) using a copper-free amino-yne click reaction. The utilization of this reaction allowed for a selective and efficient bioconjugation of the amoxicillin moiety onto the PLLA surface, avoiding copper-related concerns and ensuring biocompatibility. The process involved sequential steps that included surface activation via alkaline hydrolysis followed by an amidation reaction with ethylendiamine, functionalization with propiolic groups, and subsequent conjugation with amoxicillin via a click chemistry approach. Previous amoxicillin immobilization using tryptophan and fluorescent amino acid conjugation was carried out in order to determine the efficacy of the proposed methodology. Characterization techniques such as X-ray photoelectron spectroscopy (XPS), Attenuated Total Reflection (ATR)-Fourier Transform Infrared (FTIR) spectroscopy, surface imaging, water contact angle determination, and spectroscopic analysis confirmed the successful immobilization of both tryptophan and amoxicillin while maintaining the integrity of the PLLA surface. This tailored modification not only exhibited a novel method for surface functionalization but also opens avenues for developing antimicrobial biomaterials with improved drug-loading capacity.

Microbial colonization patterns and biodegradation of petrochemical and biodegradable plastics in lake waters: insights from a field experiment

Introduction

Once dispersed in water, plastic materials become promptly colonized by biofilm-forming microorganisms, commonly known as plastisphere.

Methods

By combining DNA sequencing and Confocal Laser Scanning Microscopy (CLSM), we investigated the plastisphere colonization patterns following exposure to natural lake waters (up to 77 days) of either petrochemical or biodegradable plastic materials (low density polyethylene - LDPE, polyethylene terephthalate - PET, polylactic acid - PLA, and the starch-based MaterBi® - Mb) in comparison to planktonic community composition. Chemical composition, water wettability, and morphology of plastic surfaces were evaluated, through Transform Infrared Spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM), and static contact angle analysis, to assess the possible effects of microbial colonization and biodegradation activity.

Results and Discussion

The phylogenetic composition of plastisphere and planktonic communities was notably different. Pioneering microbial colonisers, likely selected from lake waters, were found associated with all plastic materials, along with a core of more than 30 abundant bacterial families associated with all polymers. The different plastic materials, either derived from petrochemical hydrocarbons (i.e., LDPE and PET) or biodegradable (PLA and Mb), were used by opportunistic aquatic microorganisms as adhesion surfaces rather than carbon sources. The Mb-associated microorganisms (i.e. mostly members of the family Burkholderiaceae) were likely able to degrade the starch residues on the polymer surfaces, although the Mb matrix maintained its original chemical structure and morphology. Overall, our findings provide insights into the complex interactions between aquatic microorganisms and plastic materials found in lake waters, highlighting the importance of understanding the plastisphere dynamics to better manage the fate of plastic debris in the environment.

Simulated gastrointestinal digestion of polylactic acid (PLA) biodegradable microplastics and their interaction with the gut microbiota

The accumulation of microplastics (MPs) in the environment as well as their presence in foods and humans highlight the urgent need for studies on the effects of these particles on humans. Polylactic acid (PLA) is the most widely used bioplastic in the food industry and medical field. Despite its biodegradability, biocompatibility, and "Generally Recognized As Safe" (GRAS) status, recent animal model studies have shown that PLA MPs can alter the intestinal microbiota; however, to date, no studies have been reported on the possible gut and health consequences of its intake by humans. This work simulates the ingestion of a realistic daily amount of PLA MPs and their pass through the gastrointestinal tract by combining the INFOGEST method and the gastrointestinal simgi® model to evaluate possible effects on the human colonic microbiota composition (16S rRNA gene sequencing analysis) and metabolic functionality (lactic acid and short-chain fatty acids (SCFA) production). Although PLA MPs did not clearly alter the microbial community homeostasis, increased Bifidobacterium levels tended to increase in presence of millimetric PLA particles. Furthermore, shifts detected at the functional level suggest an alteration of microbial metabolism, and a possible biotransformation of PLA by the human microbial colonic community. Raman spectroscopy and field emission scanning electron microscopy (FESEM) characterization revealed morphological changes on the PLA MPs after the gastric phase of the digestion, and the adhesion of organic matter as well as a microbial biofilm, with surface biodegradation, after the intestinal and colonic phases. With this evidence and the emerging use of bioplastics, understanding their impact on humans and potential biodegradation through gastrointestinal digestion and the human microbiota merits critical investigation.

Microplastic polymer properties as deterministic factors driving terrestrial plastisphere microbiome assembly and succession in the field

Environmental microplastic (MP) is ubiquitous in aquatic and terrestrial ecosystems providing artificial habitats for microbes. Mechanisms of MP colonization, MP polymer impacts, and effects on soil microbiomes are largely unknown in terrestrial systems. Therefore, we experimentally tested the hypothesis that MP polymer type is an important deterministic factor affecting MP community assembly by incubating common MP polymer types in situ in landfill soil for 14 months. 16S rRNA gene amplicon sequencing indicated that MP polymers have specific impacts on plastisphere microbiomes, which are subsets of the soil microbiome. Chloroflexota, Gammaproteobacteria, certain Nitrososphaerota, and Nanoarchaeota explained differences among MP polymers and time points. Plastisphere microbial community composition derived from different MP diverged over time and was enriched in potential pathogens. PICRUSt predictions of pathway abundances and quantitative PCR of functional marker genes indicated that MP polymers exerted an ambivalent effect on genetic potentials of biogeochemical cycles. Overall, the data indicate that (i) polymer type as deterministic factor rather than stochastic factors drives plastisphere community assembly, (ii) MP impacts greenhouse gas metabolism, xenobiotic degradation and pathogen distribution, and (iii) MP serves as an ideal model system for studying fundamental questions in microbial ecology such as community assembly mechanisms in terrestrial environments.

Plastics select for distinct early colonizing microbial populations with reproducible traits across environmental gradients

Little is known about early plastic biofilm assemblage dynamics and successional changes over time. By incubating virgin microplastics along oceanic transects and comparing adhered microbial communities with those of naturally occurring plastic litter at the same locations, we constructed gene catalogues to contrast the metabolic differences between early and mature biofilm communities. Early colonization incubations were reproducibly dominated by Alteromonadaceae and harboured significantly higher proportions of genes associated with adhesion, biofilm formation, chemotaxis, hydrocarbon degradation and motility. Comparative genomic analyses among the Alteromonadaceae metagenome assembled genomes (MAGs) highlighted the importance of the mannose-sensitive hemagglutinin (MSHA) operon, recognized as a key factor for intestinal colonization, for early colonization of hydrophobic plastic surfaces. Synteny alignments of MSHA also demonstrated positive selection for mshA alleles across all MAGs, suggesting that mshA provides a competitive advantage for surface colonization and nutrient acquisition. Large-scale genomic characteristics of early colonizers varied little, despite environmental variability. Mature plastic biofilms were composed of predominantly Rhodobacteraceae and displayed significantly higher proportions of carbohydrate hydrolysis enzymes and genes for photosynthesis and secondary metabolism. Our metagenomic analyses provide insight into early biofilm formation on plastics in the ocean and how early colonizers self-assemble, compared to mature, phylogenetically and metabolically diverse biofilms.

Short-term plastisphere colonization dynamics across six plastic types

Marine plastic pollution is a major concern worldwide, but the understanding of plastisphere dynamics remains limited in the southern hemisphere. To address this knowledge gap, we conducted a study in South Australia to investigate the prokaryotic community of the plastisphere and its temporal changes over 4 weeks. We submerged six plastic types (i.e., High-Density Polyethylene [HDPE], Polyvinyl chloride [PVC], Low-Density Polyethylene [LDPE], Polypropylene [PP], Polystyrene [PS] and the understudied textile, polyester [PET]) and wood in seawater and sampled them weekly to characterize the prokaryotic community using 16S rRNA gene metabarcoding. Our results showed that the plastisphere composition shifted significantly over short time scales (i.e., 4 weeks), and each plastic type had distinct groups of unique genera. In particular, the PVC plastisphere was dominated by Cellvibrionaceae taxa, distinguishing it from other plastics. Additionally, the textile polyester, which is rarely studied in plastisphere research, supported the growth of a unique group of 25 prokaryotic genera (which included the potential pathogenic Legionella genus). Overall, this study provides valuable insights into the colonization dynamics of the plastisphere over short time scales and contributes to narrowing the research gap on the southern hemisphere plastisphere.

Development of a plastic waste treatment process by combining deep eutectic solvent (DES) pretreatment and bioaugmentation with a plastic-degrading bacterial consortium

Polyethylene terephthalate (PET), a petroleum-based plastic, and polylactic acid (PLA), a biobased plastic, have a similar visual appearance thus they usually end up in municipal waste treatment facilities. The objective of this project was to develop an effective PET and PLA waste treatment process that involves pretreatment with deep eutectic solvent (DES) followed by biodegradation with a plastic-degrading bacterial consortium in a composting system. The DES used was a mixture of choline chloride and glycerol, while the bacterial strains (Chitinophaga jiangningensis EA02, Nocardioides zeae EA12, Stenotrophomonas pavanii EA33, Gordonia desulfuricans EA63, Achromobacter xylosoxidans A9 and Mycolicibacterium parafortuitum J101) used to prepare the bacterial consortium were selected based on their ability to biodegrade PET, PLA, and plasticizer. The plastic samples (a PET bottle, PLA cup, and PLA film) were pretreated with DES through a dip-coating method. The DES-coated plastic samples exhibited higher surface wettability and biofilm formation, indicating that DES increases the hydrophilicity of the plastic and facilitates bacterial attachment to the plastic surface. The combined action of DES pretreatment and bioaugmentation with a plastic-degrading bacterial consortium led to improved degradation of PET and PLA samples in various environments, including aqueous media at ambient temperature, lab-scale traditional composting, and pilot-scale composting.

The bioaccessibility of adsorped heavy metals on biofilm-coated microplastics and their implication for the progression of neurodegenerative diseases

Microplastic (MP) tiny fragments (< 5 mm) of conventional and specialized industrial polymers are persistent and ubiquitous in both aquatic and terrestrial ecosystem. Breathing, ingestion, consumption of food stuffs, potable water, and skin are possible routes of MP exposure that pose potential human health risk. Various microorganisms including bacteria, cyanobacteria, and microalgae rapidly colonized on MP surfaces which initiate biofilm formation. It gradually changed the MP surface chemistry and polymer properties that attract environmental metals. Physicochemical and environmental parameters like polymer type, dissolved organic matter (DOM), pH, salinity, ion concentrations, and microbial community compositions regulate metal adsorption on MP biofilm surface. A set of highly conserved proteins tightly regulates metal uptake, subcellular distribution, storage, and transport to maintain cellular homeostasis. Exposure of metal-MP biofilm can disrupt that cellular homeostasis to induce toxicities. Imbalances in metal concentrations therefore led to neuronal network dysfunction, ROS, mitochondrial damage in diseases like Alzheimer's disease (AD), Parkinson's disease (PD), and Prion disorder. This review focuses on the biofilm development on MP surfaces, factors controlling the growth of MP biofilm which triggered metal accumulation to induce neurotoxicological consequences in human body and stategies to reestablish the homeostasis. Thus, the present study gives a new approach on the health risks of heavy metals associated with MP biofilm in which biofilms trigger metal accumulation and MPs serve as a vector for those accumulated metals causing metal dysbiosis in human body.

Polyethylene degradation and heavy metals leaching under realistic tropical marine climate

The study examines the influence of temperature and pH on the leaching of six heavy metals (HMs) species: aluminum (Al), zinc (Zn), chromium (Cr), copper (Cu), lead (Pb) and arsenic (As) from transparent polyethylene pellets into seawater. The idea is to understand the potential influence of intensifying global warming and ocean acidification towards microplastic toxicity in the ocean. HMs leaching was obvious by 24th hours, with most HMs concentration decreased in water by 120th and 240th hours except Al. Nevertheless, we report that temperature and pH do not influence the overall HMs leaching from PE pellets with statistical analysis showing no significance (p < 0.05) between temperature and pH toward HMs concentration. Instead, it is hypothesized that these two parameters may be crucial in promoting heavy metal adsorption onto PE pellets under tropical weathering. However, Field Emission Scanning Electron Microscope (FESEM) revealed that temperature and pH are influential in polymer aging and surficial breakdown where pellets exposed in warm, acidic waters showed the greatest extent of weathering. This study highlights that PE pellets exposed under tropical conditions may accelerate surficial degradation and possibly stimulate HMs adherence to the polymer as a pollution vector. Further consideration of metal behaviour in water and microbial activities is crucial to improve our understanding of microplastic toxicity under tropical weathering.

The long-term effect of sub-boiling water on dental unit waterlines and its ability to control cross-contamination in dentistry

This study investigated the effect of water at high temperature on the physical and mechanical properties of polyurethane and on biofilm removal, aiming for its applicability in dental unit waterlines. The evaluations were carried out after simulating a 1-year period of daily immersion and measured changes in color, microhardness, surface roughness, and tensile strength before and after reproducing a disinfection protocol. For antibiofilm activity measurement, fragments of waterline were contaminated with Pseudomonas aeruginosa and submitted to the disinfection protocols. Relative to effects on the physical and mechanical properties, immersion in water at 60°C did not promote changes in color and tensile strength. However, lower values were observed for microhardness and increased values for surface roughness. Regarding antibiofilm action, water at 60°C significantly reduced the microbial load and promoted substantial changes in cells morphology. In conclusion, disinfection with water at 60°C demonstrated possible application in controlling cross-contamination in dentistry.

Prolonged survival time of Daphnia magna exposed to polylactic acid breakdown nanoplastics

Polylactic acid nanoparticles (PLA NPs) according to food and drug administration are biodegradable and biocompatible polymers that have received a lot of attention due to their natural degradation mechanism. Although there is already available information concerning the effects of PLA microplastic to aquatic organisms, the knowledge about PLA NPs is still vague. In the present study, we analyzed the chemical composition of engineered PLA NPs, daily used PLA items and their breakdown products. We show that PLA breakdown products are oxidized and may contain aldehydes and/or ketones. The breakdown produces nanosized particles, nanoplastics, and possibly other small molecules as lactide or cyclic oligomers. Further, we show that all PLA breakdown nanoplastics extended the survival rate in Daphnia magna in an acute toxicity assay, however, only PLA plastic cup breakdown nanoplastics showed a significant difference compared to a control group.

The hidden risk of microplastic-associated pathogens in aquatic environments

Increasing studies of plastisphere have raised public concern about microplastics (MPs) as vectors for pathogens, especially in aquatic environments. However, the extent to which pathogens affect human health through MPs remains unclear, as controversies persist regarding the distinct pathogen colonization on MPs as well as the transmission routes and infection probability of MP-associated pathogens from water to humans. In this review, we critically discuss whether and how pathogens approach humans via MPs, shedding light on the potential health risks involved. Drawing on cutting-edge multidisciplinary research, we show that some MPs may facilitate the growth and long-range transmission of specific pathogens in aquatic environments, ultimately increasing the risk of infection in humans. We identify MP- and pathogen-rich settings, such as wastewater treatment plants, aquaculture farms, and swimming pools, as possible sites for human exposure to MP-associated pathogens. This review emphasizes the need for further research and targeted interventions to better understand and mitigate the potential health risks associated with MP-mediated pathogen transmission.