Recent Advances in Zinc Oxide Nanostructures with Antimicrobial Activities

First-principles study of Ga2Ge2S3Se3 monolayer: a promising photocatalyst for water splitting

Recently, the quaternary Janus monolayers with the formula A2B2X3Y3 have been shown to be promising candidates for optoelectronic applications, especially in the photocatalytic water splitting reaction. Therefore, first-principles calculations were employed to investigate the photocatalytic properties of Ga2Ge2X3Y3 (X and Y represent S, Se or Te atoms) monolayers. The Ga2Ge2S3Se3 and Ga2Ge2Se3Te3 monolayers exhibit dynamic and thermal stability, supported by high cohesive energies (3.78-4.20 eV) and positive phonon dispersion. With a moderate Young's modulus (50.02-65.31 N m-1) and high Poisson's ratio (0.39-0.41), these monolayers offer a balance of stiffness and flexibility, making them suitable for flexible electronic applications. Especially, the difference in work function of 0.27 eV induces an intrinsic electric field in the Ga2Ge2S3Se3 monolayer, making the electronic structure of this material be suitable for the photocatalytic water splitting process. With light irradiation, the oxygen evolution reaction (OER) happened simultaneously, producing electrons and H+ protons for the hydrogen evolution reaction (HER) to happen at a low potential barrier. Moreover, the Ga2Ge2S3Se3 monolayer has a high absorption rate α(ω) of 105-106 cm-1 and a high electron mobility of 430.82-461.50 cm2 V-1 s-1. These characteristics result in a good solar-to-hydrogen of the Ga2Ge2S3Se3 monolayer (14.80%) which is promising for use in photon-driven water splitting.

Harnessing Stevia rebaudiana for Zinc Oxide Nanoparticle Green Synthesis: A Sustainable Solution to Combat Multidrug-Resistant Bacterial Pathogens

The rise of multidrug-resistant (MDR) bacteria in food products poses a significant threat to public health, necessitating innovative and sustainable antimicrobial solutions. This study investigates the green synthesis of zinc oxide nanoparticles (ZnO-NPs) using Stevia rebaudiana extracts to evaluate their antibacterial and antibiofilm activities against MDR Staphylococcus aureus strains isolated from sold fish samples. The obtained results show that the contamination with S. aureus reached 54.2% in the tested fish samples (n = 120), underscoring the urgent need for effective interventions. ZnO-NPs were successfully synthesized and characterized using UV-visible spectroscopy, FT-IR, XRD, and TEM, confirming their formation with an average size of 15.7 nm and reflecting their suitability for antimicrobial and biological applications. ZnO-NPs exhibited potent antibacterial activity, with a maximum inhibition zone of 24.4 ± 0.4 mm at 20 μg/disk, MIC values of 6.25-25 μg/mL, and MBC values of 12.5-50 μg/mL. Additionally, biofilm formation was inhibited by up to 92.1% at 250 μg/mL. Our mechanistic study confirmed that ZnO-NPs damage bacterial membranes and DNA, leading to the intracellular leakage of cell components that lead to bacterial cell lysis. The use of S. rebaudiana in ZnO-NP synthesis aligns with green chemistry principles, offering an eco-friendly alternative to conventional antibiotics and enhancing the bioactivity of ZnO-NPs, and may address the growing issue of antimicrobial resistance, thereby contributing to improved food safety and public health protection.

Investigation of the photocatalytic potential of C/N-co-doped ZnO nanorods produced via a mechano-thermal process

Doping in pure materials causes vital alterations in opto-electrical and physicochemical characteristics, which enable the produced doped material to be highly efficient and effective. The current work focused on the synthesis of C/N-co-doped-ZnO nanorods via a facile, eco-friendly, and solvent-free mechano-thermal approach. The synthesized C/N-co-doped ZnO nanorods were employed for the photocatalytic decay of methylene blue (MB) and brilliant cresyl blue (BCB) dyes, and their degradation capability was compared with that of pure ZnO nanoparticles prepared via a precipitation approach. The FESEM findings confirmed the formation of rod-shaped nanostructures of co-doped ZnO nanoparticles, and EDX and XPS results revealed the successful doping of C and N atoms in ZnO lattices. The XRD and XPS results substantiated that N-doping in the ZnO lattice followed substitutional and interstitial mechanisms, while C-doping followed a substitutional pathway. The co-doped ZnO nanorods exhibited highly enhanced degradation potential toward both MB (∼99%) and BCB (∼98%) dyes upon exposure to visible light for 60 min in a basic medium at pH = 10 owing to factors such as formation of new energy states within the band gap of ZnO, delayed recombination of photogenerated charge carriers, and formation of lattice defects in the ZnO lattice due to C and N doping. The MB and BCB dyes photodegraded at degradation rates of 637.23 × 10-4 and 775.25 × 10-4 min-1, respectively, and the photodegradation process showed good agreement with the pseudo-first-order kinetics in the presence of co-doped ZnO nanorods under visible light illumination. The ˙O2 - radicals were the key reactive species involved in the decay of MB and BCB dyes over co-doped ZnO, as confirmed via scavenger studies, and the C/N-co-doped ZnO nanorods retained approximately 90% and 91% efficiencies for BCB and MB dyes, respectively, after three successive cycles of reuse, which confirmed their good stability and reusability under visible light.

In vitro antioxidant and antibacterial activities of biogenic synthesized zinc oxide nanoparticles using leaf extract of Mallotus philippinensis Mull. Arg

The preparation of metallic nanoparticles (NPs) using the green method is rapid, eco-friendly, and easily scaled up at room temperature and pressure. In the current study, zinc oxide nanoparticles (ZnO NPs) were prepared utilizing leaf extract from Mallotus philippinensis, employing two distinct precursors of zinc oxide: zinc acetate and zinc nitrate. The antioxidant and antibacterial properties of the synthesized nanoparticles were also evaluated. The synthesis of ZnO NPs was preliminary monitored by UV-visible analysis. The biosynthesized nanoparticles were further characterized using a variety of techniques, such as Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), and ultraviolet-visible (UV-Vis) spectroscopy. XRD peaks showed that nanoparticles synthesized from both zinc precursors exhibit crystalline properties, having wurtzite hexagonal shapes. The TEM analysis indicates that the average crystallite size was determined to be 21 nm and 28 nm for zinc nitrate and zinc acetate as precursor. FTIR analysis confirmed the presence of polyphenolic compounds on the surface of the nanoparticles, which likely acted as reducing and capping agents during ZnO NP synthesis. The antioxidant activity of M. philippinensis-mediated ZnO NPs was assessed in vitro. ZnO NPs synthesized using zinc nitrate exhibited higher antioxidant potential (IC50 = 65.31 µg/ml) compared to those synthesized using zinc acetate (IC50 = 66.87 µg/ml). Furthermore, the ZnO NPs demonstrated significant antibacterial activity against both gram-positive and gram-negative bacteria, including Klebsiella pneumoniae (K. pneumoniae), Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), and Streptococcus pneumoniae (S. pneumoniae). The highest antibacterial activity was observed against S. pneumoniae, with a zone of inhibition of 14.97 ± 0.38 mm for ZnO NPs synthesized using zinc nitrate. These findings suggest that M. philippinensis leaf extract is an effective reducing and capping agent for the biosynthesis of ZnO NPs. The resulting nanoparticles exhibit potent antioxidant and antibacterial properties, highlighting their potential applications in biomedical and environmental fields.

Use of Antimicrobial Nanoparticles for the Management of Dental Diseases

Dental diseases represent a significant global health concern, with traditional treatment methods often proving costly and lacking in long-term efficacy. Emerging research highlights nanoparticles as a promising, cost-effective therapeutic alternative, owing to their unique properties. This review aims to provide a comprehensive overview of the application of antimicrobial and antioxidant nanoparticles in the management of dental diseases. Silver and gold nanoparticles have shown great potential for inhibiting biofilm formation and thus preventing dental caries, gingivitis, and periodontitis. Various dental products can integrate copper nanoparticles, known for their antimicrobial properties, to combat oral infections. Similarly, zinc oxide nanoparticles enhance the antimicrobial performance of dental materials, including adhesives and cements. Titanium dioxide and cerium oxide nanoparticles possess antimicrobial and photocatalytic properties, rendering them advantageous for dental materials and oral hygiene products. Chitosan nanoparticles are effective in inhibiting oral pathogens and reducing inflammation in periodontal tissues. Additionally, curcumin nanoparticles, with their antimicrobial, anti-inflammatory, and antioxidant properties, can enhance the overall performance of dental materials and oral care products. Incorporating these diverse nanoparticles into dental materials and oral care products holds the potential to significantly reduce the risk of infection, control biofilm formation, and improve overall oral health. This review underscores the importance of continued research and development in this promising field to realize the full potential of nanoparticles in dental care.

Zinc Oxide-Loaded Recycled PET Nanofibers for Applications in Healthcare and Biomedical Devices

Polyethylene terephthalate (PET) is a widely utilized synthetic polymer, favored in various applications for its desirable physicochemical characteristics and widespread accessibility. However, its extensive utilization, coupled with improper waste disposal, has led to the alarming pollution of the environment. Thus, recycling PET products is essential for diminishing global pollution and turning waste into meaningful materials. Therefore, this study proposes the fabrication of electrospun membranes made of recycled PET nanofibers as a cost-effective valorization method for PET waste. ZnO nanoparticles were coated onto polymeric materials to enhance the antimicrobial properties of the PET fibers. Morphostructural investigations revealed the formation of fibrillar membranes made of unordered nanofibers (i.e., 40-100 nm in diameter), on the surface of which zinc oxide nanoparticles of 10-20 nm were attached. PET@ZnO membranes demonstrated effective antimicrobial and antibiofilm activity against Gram-positive and Gram-negative bacteria, yeasts, and molds, while imparting no toxicity to amniotic fluid stem cells. In vivo tests confirmed the materials' biocompatibility, as no side effects were observed in mice following membrane implantation. Altogether, these findings highlight the potential of integrating ZnO nanoparticles into recycled PET to develop multifunctional materials suitable for healthcare facilities (such as antimicrobial textiles) and biomedical devices, including applications such as textiles, meshes, and sutures.

Green Synthesis of Zinc Oxide Nanoparticles: Preparation, Characterization, and Biomedical Applications - A Review

Over the last decade, biomedical nanomaterials have garnered significant attention due to their remarkable biological properties and diverse applications in biomedicine. Metal oxide nanoparticles (NPs) are particularly notable for their wide range of medicinal uses, including antibacterial, anticancer, biosensing, cell imaging, and drug/gene delivery. Among these, zinc oxide (ZnO) NPs stand out for their versatility and effectiveness. Recently, ZnO NPs have become a primary material in various sectors, such as pharmaceutical, cosmetic, antimicrobials, construction, textile, and automotive industries. ZnO NPs can generate reactive oxygen species and induce cellular apoptosis, thus underpinning their potent anticancer and antibacterial properties. To meet the growing demand, numerous synthetic approaches have been developed to produce ZnO NPs. However, traditional manufacturing processes often involve significant economic and environmental costs, prompting a search for more sustainable alternatives. Intriguingly, biological synthesis methods utilizing plants, plant extracts, or microorganisms have emerged as ideal for producing ZnO NPs. These green production techniques offer numerous medicinal, economic, environmental, and health benefits. This review highlights the latest advancements in the green synthesis of ZnO NPs and their biomedical applications, showcasing their potential to revolutionize the field with eco-friendly and cost-effective solutions.

Synergistic efficacy of ZnO quantum dots, Ag NPs, and nitazoxanide composite against multidrug-resistant human pathogens as new trend of revolutionizing antimicrobial treatment

Antibiotic resistance is currently becoming a more serious threat to global health, especially in severe nosocomial infections treatment by multidrug-resistant bacteria. This research provides a new way of synergizing green-synthesis for zinc oxide quantum dots (ZnO-QDs with hexagonal crystals) that are 7 nm in diameter and zero-valent Ag cubic crystals that are 67 nm in size embedded with nitazoxanide substrate (NAZ). Instrumental characterization like SEM, TEM, EDAX, and FT-IR and comprehensive antimicrobial studies were conducted to study the incorporation behavior of composites based on Ag NPs/ZnO QDs/NAZ. This combination has not been hitherto addressed anywhere else in the published literature, as well as commercial viability. In this context, we have precisely tuned nanoparticle to nitazoxanide ratio for designing the formulation demonstrating potent activity against MDR infections. By employing nitazoxanide as a scaffold and careful decoration thereof antimicrobial potency has been unlocked overriding conventional therapies. In addition, Ag NPs/ZnO-QDs/nitazoxanide (G6) formula exhibited a therapeutic efficacy span of 96.15 ± 1.68% to 99.57 ± 0.20% against MDR human infections post 48 h incubation; a breakthrough in therapeutic efficacy levels has been achieved by our method. Accordingly, ZnO QDs/Ag NPs/NAZ composite offered potential multidrug resistant human pathogens as a new trend of revolutionizing antimicrobial treatment.

Novel Synthesis of Zinc Oxide on Cotton Fabric by Cathodic Cage Plasma Deposition for Photocatalytic and Antibacterial Performance

Cotton fabrics with zinc oxide (ZnO) coating are of significant interest due to their excellent antibacterial performance. Thus, they are widely in demand in the textile industry due to their medical and hygienic properties. However, conventional techniques used to deposit ZnO on fabric require long processing times in deposition, complex and expensive equipment, and multiple steps for deposition, such as a separate process for nanoparticle synthesis and subsequent deposition on fabric. In this study, we proposed a new method for the deposition of ZnO on fabric, using cathodic cage plasma deposition (CCPD), which is commonly used for coating deposition on conductor materials and is not widely used for fabric due to the temperature sensitivity of the fabric. The effect of gas composition, including argon and a hydrogen-argon mixture, on the properties of ZnO deposition is investigated. The deposited samples are characterized by XRD, SEM, EDS, photocatalytic, and antibacterial performance against Staphylococcus aureus and Pseudomonas aeruginosa bacteria. It is observed that ZnO-deposited cotton fabric exhibits excellent photocatalytic degradation of methylene blue and antibacterial performance, specifically when a hydrogen-argon mixture is used in CCPD. The results demonstrate that CCPD can be used effectively for ZnO deposition on cotton fabric; this system is already used in industrial-scale applications and is thus expected to be of significant interest to garment manufacturers and hospitals.

The Mechanism of Zinc Oxide in Alleviating Diarrhea in Piglets after Weaning: A Review from the Perspective of Intestinal Barrier Function

Weaning is one of the most challenging phases for piglets, and it is also the time when piglets are the most susceptible to diarrhea, which may result in significant economic losses for pig production. One of the dietary strategies for reducing post-weaning diarrhea (PWD) in piglets is to provide them with a pharmacological dose of zinc oxide (ZnO). However, excessive or long-term usage of high-dose ZnO has significant impacts on pig health and the ecological environment. Therefore, caution should be exercised when considering the use of high-dose ZnO for the prevention or treatment of PWD in piglets. In this paper, the significant role of zinc in animal health, the potential mode of action of ZnO in alleviating diarrhea, and the impact of innovative, highly efficient ZnO alternatives on the regulation of piglet diarrhea were reviewed to offer insights into the application of novel ZnO in pig production.

Novel Antimicrobial Agents Based on Zinc-Doped Hydroxyapatite Loaded with Tetracycline

In this paper, we present for the first time the development of zinc-doped hydroxyapatite enriched with tetracycline (ZnHApTe) powders and provide a comprehensive evaluation of their physico-chemical and biological properties. Various techniques such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) were used for the sample's complex evaluation. Moreover, the biocompatibility of zinc-doped hydroxyapatite (ZnHAp) and ZnHApTe nanoparticles was evaluated with the aid of human fetal osteoblastic cells (hFOB 1.19 cell line). The results of the biological assays suggested that these nanoparticles hold great promise as potential candidates for the future development of novel biocompatible and antimicrobial agents for biomedical applications. The antimicrobial properties of the ZnHAp and ZnHApTe nanoparticles were assessed using the standard reference microbial strains Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, and Candida albicans ATCC 10231. The results of the in vitro antimicrobial assay demonstrated that both tested materials exhibited good antimicrobial activity. Additionally, these data also indicated that the antimicrobial effects of the ZnHAp nanoparticles were intensified by the presence of tetracycline (Te). Furthermore, the results also suggested that the antimicrobial activity of the samples increased with the incubation time.

Application of nano-ZnO in the food preservation industry: antibacterial mechanisms, influencing factors, intelligent packaging, preservation film and safety

In recent years, how to improve the functional performance of food packaging materials has received increasing attention. One common inorganic material, nanometer zinc oxide (ZnO-NPs), has garnered significant attention due to its excellent antibacterial properties and sensitivity. Consequently, ZnO-NP-based functional packaging materials are rapidly developing in the food industry. However, there is currently a lack of comprehensive and systematic reviews on the use of ZnO-NPs as functional fillers in food packaging. In this review, we introduced the characteristics and antibacterial mechanism of ZnO-NPs, and paid attention to the factors affecting the antibacterial activity of ZnO-NPs. Furthermore, we systematically analyzed the application of intelligent packaging and antibacterial packaging containing ZnO-NPs in the food industry. At the same time, this paper also thoroughly investigated the impact of ZnO-NPs on various properties including thickness, moisture resistance, water vapor barrier, mechanical properties, optical properties, thermal properties and microstructure of food packaging materials. Finally, we discussed the migration and safety of ZnO-NPs in packaging materials. ZnO-NPs are safe and have negligible migration rates, simultaneously their sensitivity and antibacterial properties can be used to detect the quality changes of food during storage and extend its shelf life.

A Near-Infrared Photothermal-Responsive Underwater Adhesive with Tough Adhesion and Antibacterial Properties

Developing tunable underwater adhesives that possess tough adhesion in service and easy detachment when required remains challenging. Herein, a strategy is proposed to design a near infrared (NIR) photothermal-responsive underwater adhesive by incorporating MXene (Ti3C2Tx)-based nanoparticles within isocyanate-modified polydimethylsiloxane (PDMS) polymer chains. The developed adhesive exhibits long-term and tough adhesion with an underwater adhesion strength reaching 5.478 MPa. Such strong adhesion is mainly attributed to the covalent bonds and hydrogen bonds at the adhesive-substrate interface. By making use of the photothermal-response of MXene-based nanoparticles and the thermal response of PDMS-based chains, the adhesive possesses photothermal-responsive performance, exhibiting sharply diminished adhesion under NIR irradiation. Such NIR-triggered tunable adhesion allows for easy and active detachment of the adhesive when needed. Moreover, the underwater adhesive exhibits photothermal antibacterial property, making it highly desirable for underwater applications. This work enhances the understanding of photothermal-responsive underwater adhesion, enabling the design of tunable underwater adhesives for biomedical and engineering applications.

Silk Sericin and Its Composite Materials with Antibacterial Properties to Enhance Wound Healing: A Review

Wound infections may disrupt the normal wound-healing process. Large amounts of antibiotics are frequently used to prevent pathogenic infections; however, this can lead to resistance development. Biomaterials possessing antimicrobial properties have promising applications for reducing antibiotic usage and promoting wound healing. Silk sericin (SS) has been increasingly explored for skin wound healing applications owing to its excellent biocompatibility and antioxidant, antimicrobial, and ultraviolet-resistant properties. In recent years, SS-based composite biomaterials with a broader antimicrobial spectrum have been extensively investigated and demonstrated favorable efficacy in promoting wound healing. This review summarizes various antimicrobial agents, including metal nanoparticles, natural extracts, and antibiotics, that have been incorporated into SS composites for wound healing and elucidates their mechanisms of action. It has been revealed that SS-based biomaterials can achieve sustained antimicrobial activity by slow-release-loaded antimicrobial agents. The antimicrobial-loaded SS composites may promote wound healing through anti-infection, anti-inflammation, hemostasis, angiogenesis, and collagen deposition. The manufacturing methods, benefits, and limitations of antimicrobial-loaded SS materials are briefly discussed. This review aims to enhance the understanding of new advances and directions in SS-based antimicrobial composites and guide future biomedical research.

A new polyazomethine-based pyrazole moiety and its reinforced nanocomposites @ ZnO for antimicrobial applications

A new class of biologically active polyazomethine/pyrazole and their related nanocomposites, polyazomethine/pyrazole/zinc oxide nanoparticles, have been successfully synthesized through the polycondensation technique in the form of polyazomethine pyrazole (PAZm/Py4-6) and polyazomethine/pyrazole/zinc oxide nanoparticles (PAZm/Py/ZnOa-c). The polymeric nanocomposites were prepared with a 5% loading of zinc oxide nanofiller using the same preparation technique, in addition to the help of ultrasonic radiation. The characteristics of the new polymers, such as solubility, viscometry, and molecular weight, were examined. All the polymers were completely soluble in the following solvents: concentrated sulfuric acid, formic acid, dimethylformamide, dimethyl sulfoxide, and tetrahydrofuran. Furthermore, the weight loss of the polyazomethine pyrazole (4, 5, and 6) at 800 °C was 67%, 95%, and 86%, respectively, which indicates the thermal stability of these polymers. At 800 °C, the polyazomethine/pyrazole/zinc oxide nanoparticles (a, b, and c) lost 74%, 68%, and 75% of their weight, respectively. This shows that adding zinc oxide nanoparticles made these compounds more stable at high temperatures. The X-Ray diffraction pattern of the polyazomethine pyrazole (PAZm/Py4-6) shows a number of sharp peaks with varying intensities. The polymers that were studied had straight crystal structures. Furthermore, the measurements of polyazomethine/pyrazole/zinc oxide nanoparticles (PAZm/Py/ZnOa-c) indicate a good merging of zinc oxide nanoparticles into the matrix of polymers. The antimicrobial activity of polymers and polymer nanocomposites was tested against some selected bacteria and fungi. The synthesized polymer (c) shows the highest activity against the two types of gram-negative bacteria selected. Most tested compounds were found to be effective against gram-positive bacteria except polyazomethine pyrazole (PAZm/Py5) and polyazomethine pyrazole (PAZm/Py6), which do not exhibit any activity. The synthesized polymers and their related nanocomposites were tested for their ability to kill the chosen fungi. All of them were effective against Aspergillus flavus, but only polyazomethine pyrazole (PAZm/Py4) and polyazomethine/pyrazole/zinc oxide (PAZm/Py/ZnOc) were effective against Candida albicans.

Preparation, biological activity and antibacterial properties of tantalum surface-doped Ca2+/Zn2+nanorods

In this research, we utilize porous tantalum, known for its outstanding elastic modulus and biological properties, as a base material in biomedical applications. The human skeletal system is rich in elements like Ca and Zn. The role of Zn is crucial for achieving a spectrum of sterilizing effects, while Ca is known to effectively enhance cell differentiation and boost cellular activity. The focus of this study is the modification of porous tantalum using a hydrothermal method to synthesize Ca2+/Zn2+-doped Ta2O5nanorods. These nanorods are subjected to extensive characterization techniques to confirm their structure and composition. Additionally, their biological performance is evaluated through a range of tests, including antibacterial assessments, MTT assays, and bacteria/cell scanning electron microscopy (SEM) analyses. The objective is to determine the most effective method of surface modification for porous tantalum, thereby laying a foundational theoretical framework for its surface enhancement.

Zinc oxide nanoparticles mediate bacterial toxicity in Mueller-Hinton Broth via Zn2. Front Microbiol 2024;15:1394078. [PMID: 38711974 PMCID: PMC11070567 DOI: 10.3389/fmicb.2024.1394078] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

As antibiotic resistance increases and antibiotic development dwindles, new antimicrobial agents are needed. Recent advances in nanoscale engineering have increased interest in metal oxide nanoparticles, particularly zinc oxide nanoparticles, as antimicrobial agents. Zinc oxide nanoparticles are promising due to their broad-spectrum antibacterial activity and low production cost. Despite many studies demonstrating the effectiveness of zinc oxide nanoparticles, the antibacterial mechanism is still unknown. Previous work has implicated the role of reactive oxygen species such as hydrogen peroxide, physical damage of the cell envelope, and/or release of toxic Zn2+ ions as possible mechanisms of action. To evaluate the role of these proposed methods, we assessed the susceptibility of S. aureus mutant strains, ΔkatA and ΔmprF, to zinc oxide nanoparticles of approximately 50 nm in size. These assays demonstrated that hydrogen peroxide and electrostatic interactions are not crucial for mediating zinc oxide nanoparticle toxicity. Instead, we found that Zn2+ accumulates in Mueller-Hinton Broth over time and that removal of Zn2+ through chelation reverses this toxicity. Furthermore, we found that the physical separation of zinc oxide nanoparticles and bacterial cells using a semi-permeable membrane still allows for growth inhibition. We concluded that soluble Zn2+ is the primary mechanism by which zinc oxide nanoparticles mediate toxicity in Mueller-Hinton Broth. Future work investigating how factors such as particle morphology (e.g., size, polarity, surface defects) and media contribute to Zn2+ dissolution could allow for the synthesis of zinc oxide nanoparticles that possess chemical and morphological properties best suited for antibacterial efficacy.

Zinc(II) Iminopyridine Complexes as Antibacterial Agents: A Structure-to-Activity Study

Antibiotic resistance is currently a global health emergency. Metallodrugs, especially metal coordination complexes, comprise a broad variety of candidates to combat antibacterial infections. In this work, we designed a new family of Schiff base zinc(II) complexes with iminopyridine as an organic ligand and different inorganic ligands: chloride, nitrate, and acetate. The antibacterial effect of the Zn(II) complexes was studied against planktonic bacterial cells of Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) strains. The results showed a moderate biocide activity in both types of planktonic bacteria, which arises from the metal complexation to the Schiff base ligand. Importantly, we confirmed the crucial effect of the metal, with Zn(II) improving the activity of Cu(II) counterparts previously reported. On the other hand, the impact of the inorganic ligands was not significant for the antibacterial effect but was relevant for the complex solubility. Finally, as proof of concept of topical antibacterial formulation, we formulated an emulsion containing the most lipophilic Zn(II) complex and confirmed a sustained release for 24 h in a vertical cell diffusion assay. The promising activity of iminopyridine Zn(II) complexes is potentially worth exploring in more detailed studies.

Lanthanide-Doped ZnO Nanoparticles: Unraveling Their Role in Cytotoxicity, Antioxidant Capacity, and Nanotoxicology

This study used a sonochemical synthesis method to prepare (La, Sm)-doped ZnO nanoparticles (NPs). The effect of incorporating these lanthanide elements on the structural, optical, and morphological properties of ZnO-NPs was analyzed. The cytotoxicity and the reactive oxygen species (ROS) generation capacity of ZnO-NPs were evaluated against breast (MCF7) and colon (HT29) cancer cell lines. Their antioxidant activity was analyzed using a DPPH assay, and their toxicity towards Artemia salina nauplii was also evaluated. The results revealed that treatment with NPs resulted in the death of 10.559-42.546% and 18.230-38.643% of MCF7 and HT29 cells, respectively. This effect was attributed to the ability of NPs to downregulate ROS formation within the two cell lines in a dose-dependent manner. In the DPPH assay, treatment with (La, Sm)-doped ZnO-NPs inhibited the generation of free radicals at IC50 values ranging from 3.898 to 126.948 μg/mL. Against A. salina nauplii, the synthesized NPs did not cause death nor induce morphological changes at the tested concentrations. A series of machine learning (ML) models were used to predict the biological performance of (La, Sm)-doped ZnO-NPs. Among the designed ML models, the gradient boosting model resulted in the greatest mean absolute error (MAE) (MAE 9.027, R2 = 0.86). The data generated in this work provide innovative insights into the influence of La and Sm on the structural arrangement and chemical features of ZnO-NPs, together with their cytotoxicity, antioxidant activity, and in vivo toxicity.

Effects of zinc oxide nanocomposites on microorganism growth and protection of physicochemical quality during maize storage

Maize moldy and spoilage due to microbial growth is a significant challenge in grain storage. This study aimed to evaluate the effectiveness of a zinc oxide nanocomposite, ZnO@mSiO2, prepared in our previous research, in inhibiting mold growth and preserving maize cell quality. The results demonstrated that ZnO@mSiO2 could effectively inhibit the growth of dominant microorganism, Aspergillus flavus, Talaromyces variabilis, Penicillium citrinum and Fusarium graminearum, in maize storage. Aspergillus flavus was selected as the model fungus, ZnO@mSiO2 effectively disrupted fungal hyphae structure, leading to reduced hyphal mass and inhibited spore germination. The inhibitory effect of ZnO@mSiO2 on mold growth was concentration-dependent. However, the ZnO@mSiO2 at an appropriate concentration (not exceeding 3.0 g/kg) preserved the integrity of maize cell membranes and enhancing the antioxidant activity within maize cells. The findings highlight the potential of ZnO@mSiO2 as an effective protectant to inhibit mold growth and preserve maize quality during storage.

Visible Light Responsive Dinuclear Zinc Complex Consisting of Proximally Arranged Two d10 -Zinc Centers

So far, Zn(II)-based d10 complexes have been known to be colorless unless they are accompanied by chromophoric groups, and therefore both fundamental and advanced photophysical performance of Zn centers of complexes, especially in visible-light regions has been unexplored. Here, we first demonstrate a dinuclear Zn(II) complex that shows visible light absorption using an orbital distributed over closely contacted two Zn centers experimentally determined by X-ray crystallography. A contrastive study demonstrated that intermetallic orbital interaction in dinuclear Zn(II) complex is responsible for capturing visible light to exhibit orangish yellow color, whereas an analogous one without such an interaction is colorless. This work demonstrates that introduction of Zn-Zn interactions to Zn(II) molecules contradicts the common notion that Zn is unresponsive to visible light and expands the photophysical field of zinc chemistry.

pH-Responsive Chitosan-Doped ZnO Hybrid Hydrogels for the Encapsulation of Bioactive Compounds in Aquaculture

In this study, we synthesized and characterized pH-responsive Chitosan-AgCl-doped ZnO hybrid hydrogels and evaluated their potential for loading aquaculture bioactive compounds, and assessed their antimicrobial properties against a threatening pathogen associated with disease across a broad spectrum of warm water fish and invertebrates. Hydrogel characterization consisted of assessing morphology via SEM, composition via EDS, hydrogels' network components interactions via FT-IR and pH response through swelling behavior determinations. The swelling characterization of the synthesized hydrogels demonstrated a pH-responsive behavior, showing that low pH values caused the hydrogel polymeric network to expand and capture more of the aqueous solution. These characteristics make the synthesized hydrogels suitable for the encapsulation and controlled release of drugs and bioactive compounds in aquaculture. Chitosan_ZnO hybrid hydrogels showed great antimicrobial activity against Vibrio harveyi, even better than that of loaded PB hydrogels. Here, we provide evidence for the potential capacity of Chitosan_ZnO hybrid hydrogels for the preventive and curative treatment of diseases that impact aquaculture animal health and prevent drug resistance by bacteria.

Synthesis and investigation on synergetic effect of activated carbon loaded silver nanoparticles with enhanced photocatalytic and antibacterial activities

In this study, we synthesized silver nanoparticle-loaded cashew nut shell activated carbon (Ag/CNSAC). The synthesized samples were characterized by XRD, XPS, SEM with EDS, FT-IR, and BET analysis. The XRD, XPS, and EDS data provided convincing proof that Ag loaded on CNSAC is formed. The energy dispersive spectrum analysis and X-ray diffraction pattern both supported the face-centered cubic and amorphous structures of Ag/CNSAC. The SEM micrographs showed the inner surface development of Ag NPs and many tiny pores in CNSAC. The photodegradation of methylene blue (MB) dye by the Ag/CNSAC photocatalyst was investigated. This effective degradation of MB dye by Ag/CNSAC is attributed to the cooperative action of Ag as a photocatalyst and CNSAC as a catalytic support and adsorbent. In tests with gram-positive and negative bacteria including Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), the as-synthesized Ag/CNSAC showed outstanding antibacterial efficiency. Additionally, this study demonstrates a workable procedure for creating an affordable and efficient Ag/CNSAC for the photocatalytic eradication of organic contaminants.

Physical Characteristics, Blue-Green Band Emission and Photocatalytic Activity of Au-Decorated ZnO Quantum Dots-Based Thick Films Prepared Using the Doctor Blade Technique

Nanoscale ZnO is a vital semiconductor material whose versatility can be enhanced by sensitizing it with metals, especially noble metals, such as gold (Au). ZnO quantum dots were prepared via a simple co-precipitation technique using 2-methoxy ethanol as the solvent and KOH as the pH regulator for hydrolysis. The synthesized ZnO quantum dots were deposited onto glass slides using a simple doctor blade technique. Subsequently, the films were decorated with gold nanoparticles of different sizes using a drop-casting method. The resultant films were characterized via various strategies to obtain structural, optical, morphological, and particle size information. The X-ray diffraction (XRD) reveals the formation of the hexagonal crystal structure of ZnO. Upon Au nanoparticles loading, peaks due to gold are also observed. The optical properties study shows a slight change in the band gap due to Au loading. Nanoscale sizes of particles have been confirmed through electron microscope studies. P.L. studies display blue and blue-green band emissions. The significant degradation efficiency of 90.2% methylene blue (M.B.) was attained in natural pH in 120 min using pure ZnO catalyst while one drop gold-loaded catalysts, ZnO: Au 5 nm, ZnO: Au 7 nm, ZnO: Au 10 nm and ZnO: Au 15 nm, delivered M.B. degradation efficiency of 74.5% (in 245 min), 63.8% (240 min), 49.6% (240 min) and 34.0% (170 min) in natural pH, respectively. Such films can be helpful in conventional catalysis, photocatalysis, gas sensing, biosensing, and photoactive applications.

Chemical recycling of polyester textile wastes using silver-doped zinc oxide nanoparticles: an economical solution for circular economy

The waste management of polyethylene terephthalate (PET)-derived polyester (PES) textile is a global issue, and material recovery through chemical recycling can restore a circular economy. In our investigation, microwave-induced catalytic aminolysis and glycolysis of PES textile wastes using Ag-doped ZnO nanoparticles have been proposed. Ag-doped ZnO is prepared by the sol-gel method and characterised by XRD, FT-IR, UV-Vis, SEM-EDX and TEM. The reaction parameters such as PET-to-catalyst ratio, microwave power and irradiation time, temperature and catalyst recycling have been optimised. The catalyst was found to be more stable and could be recycled up to six times without losing its activity. Both the aminolysis and glycolysis of PES showed 100% conversion and afforded of bis (2-hydroxy ethylene) terephthalamide (BHETA) and bis (2-hydroxy ethylene) terephthalate (BHET), respectively. The depolymerisation of PES wastes using Ag-doped ZnO afforded BHETA and BHET for about 95 and 90%, respectively. The monomers BHET and BHETA confirmed by FT-IR, ¹H NMR and mass spectroscopy. According to the findings, 2 mol% Ag-doped ZnO has higher catalytic activity.

Photocatalytic Degradation of Methylene Blue Using N-Doped ZnO/Carbon Dot (N-ZnO/CD) Nanocomposites Derived from Organic Soybean

This study reports on successful synthesis of carbon dots (CDs), nitrogen-doped zinc oxide (N-ZnO), and N-ZnO/CD nanocomposites as photocatalysts for degradation of methylene blue. The first part was the synthesis of CDs utilizing a precursor from soybean and ethylenediamine as a dopant by a hydrothermal method. The second part was the synthesis of N-ZnO with urea as the nitrogen dopant carried out by a calcination method in a furnace at 500 °C for 2 h in an N2 atmosphere (5 °C min-1). The third part was the synthesis of N-ZnO/CD nanocomposites. The characteristics of CDs, N-ZnO, and N-ZnO/CD nanocomposites were analyzed through Fourier transform infrared (FTIR), UV-vis absorbance, photoluminescence (PL), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), thermal gravimetry analysis (TGA), field-emission scanning electron microscopy energy-dispersive spectroscopy (FESEM EDS), X-ray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller (BET) analysis. Based on the HR-TEM analysis, the CDs had a spherical shape with an average particle size of 4.249 nm. Meanwhile, based on the XRD and HR-TEM characterization, the N-ZnO and N-ZnO/CD nanocomposites have wurtzite hexagonal structures. The materials of N-ZnO and N-ZnO/CD show increased adsorption in the visible light region and low energy gap E g. The E g values of N-ZnO and N-ZnO/CDs were found to be 2.95 and 2.81 eV, respectively, whereas the surface area (S BET) values 3.827 m2 g-1 (N-ZnO) and 3.757 m2 g-1(N-ZnO/CDs) belonged to the microporous structure. In the last part, the photocatalysts of CDs, N-ZnO, and N-ZnO/CD nanocomposites were used for degradation of MB (10 ppm) under UV-B light irradiation pH = 7.04 (neutral) for 60 min at room temperature. The N-ZnO/CD nanocomposites showed a photodegradation efficiency of 83.4% with a kinetic rate of 0.0299 min-1 higher than N-ZnO and CDs. The XRD analysis and FESEM EDS of the N-ZnO/CDs before and after three cycles confirm the stability of the photocatalyst with an MB degradation of 58.2%. These results have clearly shown that the N-ZnO/CD nanocomposites could be used as an ideal photocatalytic material for the decolorization of organic compounds in wastewater.

Boosting the Antibacterial Performance of Natural Rubber Latex Foam by Introducing Silver-Doped Zinc Oxide

Natural rubber (NR) latex foam is one of the rubber products that are increasingly in demand in the market. This is simply because of its lightweight, good thermal insulation, and resilience. The applications of NR latex foam are mostly for pillows and mattresses. This has resulted in these products requiring antibacterial performance which is very important for the safety of the end-users. In this study, the antibacterial NR latex foam was prepared by incorporating the silver-doped zinc oxide (Ag-doped ZnO) into the NR latex foam. Ag-doped ZnO was prepared by microwave-assisted method and then characterized through morphological characteristics and X-ray diffraction (XRD). The content of Ag doped onto ZnO was designed by varying the AgNO₃ content at 15 wt%, 50 wt%, and 100 wt% of ZnO. The results confirmed that the Ag was successfully doped onto ZnO. The silver particles were found to be in the 40-50 nm range, where the size of ZnO ranges between 300 and 400 nm, and the Ag attached to the ZnO particles. The XRD patterns of Ag-doped ZnO correspond to planes of hexagonal wurtzite ZnO structure and cubic metallic Ag. This Ag-doped ZnO was further added to NR latex foam. It was observed that Ag-doped ZnO did not affect the physical properties of the NR latex foam. However, it is clear that both the inhibition zone and percent reduction of bacteria (e.g., E. coli and S. aureus) were enhanced by the addition of Ag-doped ZnO. It showed a decrease in the amount of cell growth over contact time. The content of 100 wt% AgNO₃ could reduce E. coli and S. aureus up to 64.72% and 58.90%, respectively, when samples were maintained for 24 h. This study provides a scientific understanding of how Ag-doped ZnO could facilitate the development of eventual rubber foam products based on the respective results.

Airbrushed PSF/ZnO Composite Coatings as a Novel Approach for the Consolidation of Historical Bones

In this work, the preparation and characterization of films based on polysulfone (PSF) filled with zinc oxide, ZnO, nanoparticles (NPs) are conducted. The novelty of this research mainly relies on two points: (i) the use of a commercial airbrush to prepare or modify materials, and (ii) the design of new materials (nanocomposites) for the consolidation and restoration of historical bones. To accomplish these objectives, free-standing thin films and ancient bone coatings of PSF/ZnO nanocomposites with different particle contents (0%, 1%, 2%, 5% and 10%, % wt) are prepared using a commercial airbrush. Mechanical characterization is carried out to correlate properties between free-standing thin films and coatings, thus understanding the final performance of the coatings as consolidants for ancient bones. Thin films of PSF/ZnO show that the elastic modulus (E) increases with particle content. The mechanical behavior of the surfaces of the treated and untreated bones is studied locally using Martens hardness measurements. Maximum values of Martens hardness are obtained for the bone samples treated with polysulfone filled with 1% ZnO nanoparticles (HM = 850 N·mm^-2) or 2% ZnO (HM = 625 N·mm^-2) compared to those treated just with neat PSF (HM = 282 N·mm^-2) or untreated bone (HM = 140 N·mm^-2), indicating there is a correspondence between rigidity of free-standing films and hardness of the corresponding coatings. In terms of mechanical performance, it is demonstrated the existence of a balance between nanoparticle concentration and probability of nanoparticle aggregation, which allows better material design for ancient bones consolidation.

Nanotechnology Involved in Treating Urinary Tract Infections: An Overview

Considered as the most frequent contaminations that do not require hospitalization, urinary tract infections (UTIs) are largely known to cause significant personal burdens on patients. Although UTIs overall are highly preventable health issues, the recourse to antibiotics as drug treatments for these infections is a worryingly spread approach that should be addressed and gradually overcome in a contemporary, modernized healthcare system. With a virtually alarming global rise of antibiotic resistance overall, nanotechnologies may prove to be the much-needed 'lifebuoy' that will eventually suppress this prejudicial phenomenon. This review aims to present the most promising, currently known nano-solutions, with glimpses on clinical and epidemiological aspects of the UTIs, prospective diagnostic instruments, and non-antibiotic treatments, all of these engulfed in a comprehensive overview.

Novel Semiconductor Cu(C3H3N3S3)3/ZnTiO3/TiO2 for the Photoinactivation of E. coli and S. aureus under Solar Light

The use of semiconductors for bacterial photoinactivation is a promising approach that has attracted great interest in wastewater remediation. The photoinactivator Cu-TTC/ZTO/TO was synthesized by the solvothermal method from the coordination complex Cu(C₃H₃N₃S₃)₃ (Cu-TTC) and the hybrid semiconductor ZnTiO₃/TiO₂ (ZTO/TO). In this study, the effect of photocatalyst composition/concentration as well as radiation intensity on the photoinactivation of the gram-negative bacteria Escherichia coli and the gram-positive bacteria Staphylococcus aureus in aqueous solutions was investigated. The results revealed that 25 mg/mL of photoinactivator, in a Cu-TTC:ZTO/TO molar ratio of 1:2 (w/w%) presents a higher rate of bacterial photoinactivation under simulated solar light (λ = 300-800 nm) in comparison to the individual components. The evidence of this study suggests that the presence of the Cu(C₃H₃N₃S₃)₃ coordination complex in the ZnTiO₃/TiO₂ hybrid semiconductor would contribute to the generation of reactive oxygen species (ROS) that are essential to initiate the bacterial photoinactivation process. Finally, the results obtained allow us to predict that the Cu-TTC/ZTO/TO photocatalyst could be used for effective bacterial inactivation of E. coli and S. aureus in aqueous systems under simulated solar light.

Metal nanoparticles against multi-drug-resistance bacteria

Antimicrobial-resistant (AMR) bacterial infections remain a significant public health concern. The situation is exacerbated by the rapid development of bacterial resistance to currently available antimicrobials. Metal nanoparticles represent a new perspective in treating AMR due to their unique mechanisms, such as disrupting bacterial cell membrane potential and integrity, biofilm inhibition, reactive oxygen species (ROS) formation, enhancing host immune responses, and inhibiting RNA and protein synthesis by inducing intracellular processes. Metal nanoparticles (MNPs) properties such as size, shape, surface functionalization, surface charges, and co-encapsulated drug delivery capability all play a role in determining their potential against multidrug-resistant bacterial infections. Silver, gold, zinc oxide, selenium, copper, cobalt, and iron oxide nanoparticles have recently been studied extensively against multidrug-resistant bacterial infections. This review aims to provide insight into the size, shape, surface properties, and co-encapsulation of various MNPs in managing multidrug-resistant bacterial infections.

Antiamoebic Properties of Ceftriaxone and Zinc-Oxide-Cyclodextrin-Conjugated Ceftriaxone

Acanthamoeba castellanii is a ubiquitous free-living amoeba capable of instigating keratitis and granulomatous amoebic encephalitis in humans. Treatment remains limited and inconsistent. Accordingly, there is a pressing need for novel compounds. Nanotechnology has been gaining attention for enhancing drug delivery and reducing toxicity. Previous work has shown that various antibiotic classes displayed antiamoebic activity. Herein, we employed two antibiotics: ampicillin and ceftriaxone, conjugated with the nanocarrier zinc oxide and β-cyclodextrin, and tested them against A. castellanii via amoebicidal, amoebistatic, encystment, excystment, cytopathogenicity, and cytotoxicity assays at a concentration of 100 μg/mL. Notably, zinc oxide β-cyclodextrin ceftriaxone significantly inhibited A. castellanii growth and cytopathogenicity. Additionally, both zinc oxide β-cyclodextrin ceftriaxone and ceftriaxone markedly inhibited A. castellanii encystment. Furthermore, all the tested compounds displayed negligible cytotoxicity. However, minimal anti-excystment or amoebicidal effects were observed for the compounds. Accordingly, this novel nanoconjugation should be employed in further studies in hope of discovering novel anti-Acanthamoeba compounds.

Novel pectin-based nanocomposite film for active food packaging applications

Novel pectin-based films reinforced with crystalline nanocellulose (CNC) and activated with zinc oxide nanoparticles (ZnO NPs) were prepared by solvent-casting method. Film ingredients enhanced UV-blocking, thermal, and antibacterial properties of active films against well-known foodborne pathogens. Optimal active films exhibited higher mechanical, water vapor barrier properties compared to pristine pectin films. SEM confirmed the even distribution of CNC and ZnO NPs in pectin matrix and their interactions were proven using FTIR. Wrapping hard cheese samples artificially contaminated with Staphylococcus aureus and Salmonella enterica with the ternary nanocomposite film at 7 °C for 5 days significantly reduced the total population counts by at least 1.02 log CFU/g. Zn2+ migrating to wrapped cheese samples was below the specific limit (5 mg/kg), confirming their safety for food contact. Overall, ZnO/CNC/pectin nanocomposite films represent promising candidates for active food packaging as safe, eco-friendly alternatives for synthetic packaging materials.

Engineered Zn-based nano-pesticides as an opportunity for treatment of phytopathogens in agriculture

People's desire for food has never slowed, despite the deterioration of the global agricultural environment and the threat to food security. People rely on agrochemicals to ensure normal crop growth and to relieve the existing demand pressure. Phytopathogens have acquired resistance to traditional pesticides as a result of pesticdes' abuse. Compared with traditional formulations, nano-pesticides have superior antimicrobial performance and are environmentally friendly. Zn-based nanoparticles (NPs) have shown their potential as strong antipathogen activity. However, their full potential has not been demonstrated yet. Here, we analyzed the prerequisites for the use of Zn-based NPs as nano-pesticides in agriculture including both intrinsic properties of the materials and environmental conditions. We also summarized the mechanisms of Zn-based NPs against phytopathogens including direct and indirect strategies to alleviate plant disease stress. Finally, the current challenges and future directions are highlighted to advance our understanding of this field and guide future studies.

The Influence of Al Doping on the Optical Characteristics of ZnO Nanopowders Obtained by the Low-Cost Sol-Gel Method

In this work, the influence of Al (0, 2, 4, and 6 wt.%) on the optical properties of ZnO has been briefly investigated and described. The undoped and doped samples were characterized using a UV-visible spectrophotometer and Photoluminescence (PL). The X-ray diffraction (XRD) data in our preceding study is also indexed, and materials are said to have a wurtzite-structured hexagonal phase and exhibit no impurity phases. The average crystallite sizes of the pure ZnO were found to increase, i.e., from 14.19 nm to 34.17 nm with an increase in temperature, and in the case of Al-doped ZnO, at a constant temperature, from 35.05 nm to 18.89 nm, respectively. The average crystallite size of AZO (Al-doped ZnO) decreases with increasing Al content. With the increasing temperature, increases in crystallinity and size of the pure ZnO have been observed. In the case of Al doping, with an increase in the concentration of doping the crystallite size is seen to be decreased, without any change in the temperature. Al doping improves the formation of the well-ordered crystalline structure of ZnO up to a certain limit of doping. The absorbance spectra were used to determine the optical band gap of the samples. The optical photoluminescence (PL) spectra of both ZnO and AZO nanopowder are obviously influenced by the increasing temperature and Al doping content, respectively. Different optical properties of ZnO and AZO were observed for different contents of Al in ZnO. The band gap of AZO nanopowder with different concentrations has been seen to be lower than that of undoped ZnO (3.10 eV), suggesting broad application potential. Also, the optical properties of ZnO were tailored by Al doping in the near visible region, suggesting various potential uses.

Electrically Conductive and Antimicrobial Agro-Food Waste Biochar Functionalized with Zinc Oxide Particles

Carbonaceous materials derived from biomass have been used as sustainable platforms for the growth of ZnO particles aiming the production of functional composite fillers. Kidney-bean pods were pyrolyzed by applying an experimental design that demonstrates that the specific surface area (S_BET) of biochar is improved with increasing pyrolysis temperature combined with a short air-oxidation time. Meanwhile, the graphitization degree and the electrical conductivity (EC) of biochars were negatively affected by increasing the air-oxidation time. The biochar sample with the higher EC and the one with the higher S_BET were selected to be functionalized with ZnO particles by a solvothermal methodology, obtaining composites with an EC and S_BET properties superior to the ZnO-rGO composite, in addition to a similar antibacterial activity. The developed ZnO-biochar composite structures, which are more ecological and biocompatible than the ZnO composites derived from graphene sheets, can be applied as electrically conductive and active fillers.

Rational design of ZnO-zeolite imidazole hybrid nanoparticles with reduced charge recombination for enhanced photocatalysis

Semiconducting zinc oxide nanoparticles (ZnO NPs) hold great potential as photocatalysts in wastewater treatment because of their favorable bandgap and cost-effectiveness. Unfortunately, ZnO NPs usually show rapid charge recombination that limits their photocatalytic efficacy significantly. Herein, we report a facile way of modifying ZnO NPs with zeolite imidazole framework-8 (ZIF8). A synergy between the two components may tackle the drawback of fast charge recombination for pristine ZnO NPs. Improved performance of photocatalytic degradation of methylene blue (MB) is confirmed by comparing with pristine ZnO and ZIF8 as the catalysts. The ZIF8 in the composite serves as a trap for photogenerated electrons, thus reducing the rate of charge recombination to enhance the photocatalysis rate. In addition, the hybridization process suppresses the aggregation of ZnO NPs, providing a large surface area and a greater number of active sites. Moreover, a small shift in the absorption band of ZnO@ZIF8 (10) NPs towards higher wavelength, also witnessed a little contribution towards enhanced photocatalytic properties. Mechanistic studies of the photocatalytic process of MB using ZnO@ZIF8 NPs catalyst reveal that hydroxyl radicals are the major reactive oxygen species. The facile hybridization of ZnO with ZIF8 provides a strategy for developing new photocatalysts with wide application potential.

Recent advances in ZnO-based photosensitizers: Synthesis, modification, and applications in photodynamic cancer therapy

Zinc oxide nanoparticles (ZnO NPs) are important semiconductor materials with interesting photo-responsive properties. During the past, ZnO-based NPs have received considerable attention for photodynamic therapy (PDT) due to their biocompatibility and excellent potential of generating tumor-killing reactive oxygen species (ROS) through gentle photodynamic activation. This article provides a comprehensive review of the recent developments and improvements in optical properties of ZnO NPs as photosensitizers for PDT. The optical properties of ZnO-based photosensitizers are significantly dependent on their charge separation, absorption potential, band gap engineering, and surface area, which can be adjusted/tuned by doping, compositing, and morphology control. Here, we first summarize the recent progress in the charge separation capability, absorption potential, band gap engineering, and surface area of nanosized ZnO-based photosensitizers. Then, morphology control that is closely related to their synthesis method is discussed. Following on, the state-of-art for the ZnO-based NPs in the treatment of hypoxic tumors is comprehensively reviewed. Finally, we provide some outlooks on common targeted therapy methods for more effective tumor killing, including the attachment of small molecules, antibodies, ligands molecules, and receptors to NPs which further improve their selective distribution and targeting, hence improving the therapeutic effectiveness. The current review may provide useful guidance for the researchers who are interested in this promising dynamic cancer treatment technology.

Preparation of Cotton-Zinc Composites by Magnetron Sputtering Metallization and Evaluation of their Antimicrobial Properties and Cytotoxicity

The aim of this investigation was to evaluate the biological properties of cotton-zinc composites. A coating of zinc (Zn) on a cotton fabric was successfully obtained by a DC magnetron sputtering system using a metallic Zn target (99.9%). The new composite was characterized using scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS), UV/Vis transmittance, and atomic absorption spectrometry with flame excitation (FAAS). The composite was tested for microbial activity against colonies of Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria and antifungal activity against Aspergillus niger and Chaetomium globosum fungal mold species as model microorganisms. Cytotoxicity screening of the tested modified material was carried out on BALB/3T3 clone mouse fibroblasts. The SEM/EDS and FAAS tests showed good uniformity of zinc content on a large surface of the composite. The conducted research showed the possibility of using the magnetron sputtering technique as a zero-waste method for producing antimicrobial textile composites.

Effects of Metal Oxide Nanoparticles in Zebrafish

Metal oxide nanoparticles (MO NPs) are increasingly employed in many fields with a wide range of applications from industries to drug delivery. Due to their semiconducting properties, metal oxide nanoparticles are commonly used in the manufacturing of several commercial products available in the market, including cosmetics, food additives, textile, paint, and antibacterial ointments. The use of metallic oxide nanoparticles for medical and cosmetic purposes leads to unavoidable human exposure, requiring a proper knowledge of their potentially harmful effects. This review offers a comprehensive overview of the possible toxicity of metallic oxide nanoparticles in zebrafish during both adulthood and growth stages, with an emphasis on the role of oxidative stress.

Poly(lactic acid)/Zinc/Alginate Complex Material: Preparation and Antimicrobial Properties

The aim of this study was to investigate an antimicrobial and degradable composite material consisting of melt-blown poly(lactic acid) nonwoven fabrics, alginate, and zinc. This paper describes the method of preparation and the characterization of the physicochemical and antimicrobial properties of the new fibrous composite material. The procedure consists of fabrication of nonwoven fabric and two steps of dip-coating modification: (1) impregnation of nonwoven samples in the solution of alginic sodium salt and (2) immersion in a solution of zinc (II) chloride. The characterization and analysis of new material included scanning electron microscopy (SEM), specific surface area (SSA), and total/average pore volume (BET). The polylactide/alginate/Zn fibrous composite were subjected to microbial activity tests against colonies of Gram-positive (Staphylococcus aureus), Gram-negative (Escherichia coli) bacterial strains, and the following fungal strains: Aspergillus niger van Tieghem and Chaetomium globosum. These results lay a technical foundation for the development and potential application of new composite as an antibacterial/antifungal material in biomedical areas.

Recent Strategies to Combat Infections from Biofilm-Forming Bacteria on Orthopaedic Implants

Biofilm-related implant infections (BRII) are a disastrous complication of both elective and trauma orthopaedic surgery and occur when an implant becomes colonised by bacteria. The definitive treatment to eradicate the infections once a biofilm has established is surgical excision of the implant and thorough local debridement, but this carries a significant socioeconomic cost, the outcomes for the patient are often poor, and there is a significant risk of recurrence. Due to the large volumes of surgical procedures performed annually involving medical device implantation, both in orthopaedic surgery and healthcare in general, and with the incidence of implant-related infection being as high as 5%, interventions to prevent and treat BRII are a major focus of research. As such, innovation is progressing at a very fast pace; the aim of this study is to review the latest interventions for the prevention and treatment of BRII, with a particular focus on implant-related approaches.

Bioactivity and Antibacterial Behaviors of Nanostructured Lithium-Doped Hydroxyapatite for Bone Scaffold Application

The material for bone scaffold replacement should be biocompatible and antibacterial to prevent scaffold-associated infection. We biofunctionalized the hydroxyapatite (HA) properties by doping it with lithium (Li). The HA and 4 Li-doped HA (0.5, 1.0, 2.0, 4.0 wt.%) samples were investigated to find the most suitable Li content for both aspects. The synthesized nanoparticles, by the mechanical alloying method, were cold-pressed uniaxially and then sintered for 2 h at 1250 °C. Characterization using field-emission scanning electron microscopy (FE-SEM) revealed particle sizes in the range of 60 to 120 nm. The XRD analysis proved the formation of HA and Li-doped HA nanoparticles with crystal sizes ranging from 59 to 89 nm. The bioactivity of samples was investigated in simulated body fluid (SBF), and the growth of apatite formed on surfaces was evaluated using SEM and EDS. Cellular behavior was estimated by MG63 osteoblast-like cells. The results of apatite growth and cell analysis showed that 1.0 wt.% Li doping was optimal to maximize the bioactivity of HA. Antibacterial characteristics against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were performed by colony-forming unit (CFU) tests. The results showed that Li in the structure of HA increases its antibacterial properties. HA biofunctionalized by Li doping can be considered a suitable option for the fabrication of bone scaffolds due to its antibacterial and unique bioactivity properties.

Bactericidal and Virucidal Activities of Biogenic Metal-Based Nanoparticles: Advances and Perspectives

Much progress has been achieved in the preparation and application of engineered nanoparticles (NPs) in the field of medicine, mainly for antibacterial and antiviral applications. In the war against bacteria and viruses, besides traditional antibiotics and antiviral drugs, metal-based nanoparticles, such as silver (AgNPs), copper (CuNPs), copper oxides (CuO-NPs), iron oxide (FeO-NPs), zinc oxide (ZnO-NPs), and titanium oxide (TiO2-NPs) have been used as potent antimicrobial agents. These nanoparticles can be synthesized by traditional methods, such as chemical and physical routes, or more recently by biogenic processes. A great variety of macro and microorganisms can be successfully used as reducing agents of metal salt precursors in the biogenic synthesis of metal-based NPs for antimicrobial activity. Depending on the nature of the biological agent, NPs with different sizes, aggregation states, morphology, surface coatings and charges can be obtained, leading to different antimicrobial effects. Considering the drug resistance to traditional therapies, the development of versatile nanomaterials with potent antimicrobial effects is under intensive investigation. In this sense, this review presents and discusses the recent progress in the preparation and application of metal-based nanoparticles biogenically synthesized for antibacterial and antivirus applications. The strength and limitations are critically discussed.

ZnO Nanoparticles-Modified Dressings to Inhibit Wound Pathogens

Zinc oxide (ZnO) nanoparticles (NPs) have been investigated for various skin therapies in recent years. These NPs can improve the healing and modulate inflammation in the wounds, but the mechanisms involved in such changes are yet to be known. In this study, we have designed a facile ZnO nano-coated dressing with improved antimicrobial efficiency against typical wound pathogens involved in biofilm and chronic infections. ZnO NPs were obtained by hydrothermal method and characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Fourier-transform infrared spectroscopy. Antibacterial and antibiofilm effects were evaluated against laboratory and clinical isolates of significant Gram-negative (Pseudomonas aeruginosa and Escherichia coli) and Gram-positive (Staphylococcus aureus and Enterococcus faecalis) opportunistic pathogens, by quantitative methods. Our results have shown that the developed dressings have a high antibacterial efficiency after 6–24 h of contact when containing 0.6 and 0.9% ZnO NPs and this effect is similar against reference and clinical isolates. Moreover, biofilm development is significantly impaired for up to three days of contact, depending on the NPs load and microbial species. These results show that ZnO-coated dressings prevent biofilm development of main wound pathogens and represent efficient candidates for developing bioactive dressings to fight chronic wounds.

In vitro effects of bis(N-[4-(hydroxyphenyl)methyl]-2-pyridinemethamine)zinc perchlorate monohydrate 4 on the physiology and interaction process of Leishmania amazonensis

Leishmaniasis is one of the most relevant neglected tropical diseases in the world, affecting 14 million people. Despite the high morbidity, mortality and socio-economic impact, few therapeutic options are available for this disease. To make matters worse, the available molecules have several limitations such as limited efficacy, high cost, side effects and increased resistance. In this context, our group previously synthesized new compounds with anti-leishmania potential being the bis(N-[4-(hydroxyphenyl)methyl]-2-pyridinemethamine)zinc perchlorate monohydrate 4 (complex 4) the most promising one. Therefore, this present work revealed some morphological and physiological changes promoted by complex 4 on Leishmania amazonensis promastigotes as well as it was evidenced its potential against intramacrophage amastigotes. Complex 4 promoted a progressive reduction on the promastigotes size and a remarkable increase on the granularity/complexity as judged by flow cytometry. Transmission electron microscopy (TEM) analysis revealed extensive mitochondrial and plasma membrane alterations, although plasma membrane integrity remained. The mitochondrial changes observed by TEM were accompanied by a decrease in the activity of mitochondrial dehydrogenases with increased production of reactive oxygen species. Interestingly, promastigotes also showed changes in lipid metabolism. Besides the very low toxicity to macrophages, complex 4 had a great effect on intramacrophage amastigotes, displaying an IC₅₀ of 3.91 μM. Collectively, the data presented here reinforce the potential of aminopyridyl compounds complexed to zinc against L. amazonensis. Thus, our work serves as a basis for in vivo assays to be designed or even the synthesis of more selective/effective compounds with lower cost.

Zinc(II) Complexes of Amino Acids as New Active Ingredients for Anti-Acne Dermatological Preparations

Zinc compounds have a number of beneficial properties for the skin, including antimicrobial, sebostatic and demulcent activities. The aim of the study was to develop new anti-acne preparations containing zinc–amino acid complexes as active ingredients. Firstly, the cytotoxicity of the zinc complexes was evaluated against human skin fibroblasts (1BR.3.N cell line) and human epidermal keratinocyte cell lines, and their antimicrobial activity was determined against Cutibacterium acnes. Then, zinc complexes of glycine and histidine were selected to create original gel formulations. The stability (by measuring pH, density and viscosity), microbiological purity (referring to PN-EN ISO standards) and efficacy of the preservative system (according to Ph. Eur. 10 methodology) for the preparations were evaluated. Skin tolerance was determined in a group of 25 healthy volunteers by the patch test. The preparations containing zinc(II) complexes with glycine and histidine as active substances can be topically used in the treatment of acne skin due to their high antibacterial activity against C. acnes and low cytotoxicity for the skin cells. Dermatological recipes have been appropriately composed; no irritation or allergy was observed, and the preparations showed high microbiological purity and physicochemical stability.