The effect of altered lignin composition on mechanical properties of CINNAMYL ALCOHOL DEHYDROGENASE (CAD) deficient poplars

CAD-deficient poplars enabled studying the influence of altered lignin composition on mechanical properties. Severe alterations in lignin composition did not influence the mechanical properties. Wood represents a hierarchical fiber-composite material with excellent mechanical properties. Despite its wide use and versatility, its mechanical behavior has not been entirely understood. It has especially been challenging to unravel the mechanical function of the cell wall matrix. Lignin engineering has been a useful tool to increase the knowledge on the mechanical function of lignin as it allows for modifications of lignin content and composition and the subsequent studying of the mechanical properties of these transgenics. Hereby, in most cases, both lignin composition and content are altered and the specific influence of lignin composition has hardly been revealed. Here, we have performed a comprehensive micromechanical, structural, and spectroscopic analysis on xylem strips of transgenic poplar plants, which are downregulated for cinnamyl alcohol dehydrogenase (CAD) by a hairpin-RNA-mediated silencing approach. All parameters were evaluated on the same samples. Raman microscopy revealed that the lignin of the hpCAD poplars was significantly enriched in aldehydes and reduced in the (relative) amount of G-units. FTIR spectra indicated pronounced changes in lignin composition, whereas lignin content was not significantly changed between WT and the hpCAD poplars. Microfibril angles were in the range of 18°-24° and were not significantly different between WT and transgenics. No significant changes were observed in mechanical properties, such as tensile stiffness, ultimate stress, and yield stress. The specific findings on hpCAD poplar allowed studying the specific influence of lignin composition on mechanics. It can be concluded that the changes in lignin composition in hpCAD poplars did not affect the micromechanical tensile properties.

Nanoscale movements of cellulose microfibrils in primary cell walls

The growing plant cell wall is commonly considered to be a fibre-reinforced structure whose strength, extensibility and anisotropy depend on the orientation of crystalline cellulose microfibrils, their bonding to the polysaccharide matrix and matrix viscoelasticity1-4. Structural reinforcement of the wall by stiff cellulose microfibrils is central to contemporary models of plant growth, mechanics and meristem dynamics4-12. Although passive microfibril reorientation during wall extension has been inferred from theory and from bulk measurements13-15, nanometre-scale movements of individual microfibrils have not been directly observed. Here we combined nanometre-scale imaging of wet cell walls by atomic force microscopy (AFM) with a stretching device and endoglucanase treatment that induces wall stress relaxation and creep, mimicking wall behaviours during cell growth. Microfibril movements during forced mechanical extensions differ from those during creep of the enzymatically loosened wall. In addition to passive angular reorientation, we observed a diverse repertoire of microfibril movements that reveal the spatial scale of molecular connections between microfibrils. Our results show that wall loosening alters microfibril connectivity, enabling microfibril dynamics not seen during mechanical stretch. These insights into microfibril movements and connectivities need to be incorporated into refined models of plant cell wall structure, growth and morphogenesis.

Molecular Origin of Strength and Stiffness in Bamboo Fibrils

Bamboo, a fast-growing grass, has a higher strength-to-weight ratio than steel and concrete. The unique properties of bamboo come from the natural composite structure of fibers that consists mainly of cellulose microfibrils in a matrix of intertwined hemicellulose and lignin called lignin-carbohydrate complex (LCC). Here, we have used atomistic simulations to study the mechanical properties of and adhesive interactions between the materials in bamboo fibers. With this aim, we have developed molecular models of lignin, hemicellulose and LCC structures to study the elastic moduli and the adhesion energies between these materials and cellulose microfibril faces. Good agreement was observed between the simulation results and experimental data. It was also shown that the hemicellulose model has stronger mechanical properties than lignin while lignin exhibits greater tendency to adhere to cellulose microfibrils. The study suggests that the abundance of hydrogen bonds in hemicellulose chains is responsible for improving the mechanical behavior of LCC. The strong van der Waals forces between lignin molecules and cellulose microfibril is responsible for higher adhesion energy between LCC and cellulose microfibrils. We also found out that the amorphous regions of cellulose microfibrils are the weakest interfaces in bamboo fibrils. Hence, they determine the fibril strength.

[Variation of microfibril angle in Dendrocalamus farinosus analyzed based on X-ray diffraction spectrum and its effect on tensile properties]

X-ray diffraction technology was used to rapidly predict variation in microfibril angle (MFA) in Dendrocalamus fari- X-ray diffraction technology was used to rapidly predict variation in microfibril angle (MFA) in Dendrocalamus farinosus. The results show that there is little variation in MFA with bamboo age from 2a to 5e, and MFA of 3a is at the maximum with the value of 8.521 degrees. The average value of MFA of 2a or 3a is greater than 4a or 5a with absolute differences less than 0.10 degrees. MFA of base, middle and upper position respectively are 8.499 degrees, 8.497 degrees and 8.483 degrees with coefficient of variation about 5%. There is an increasing tendency from the periphery to the inner of bamboo culms. Variance analysis indicates that MFA is highly sensitive to radial position, but insensitive to bamboo age and longitudinal position. The correlation coefficient of longitudinal strength and modulus of elasticity (MOE) is 0.57. MFA was responsible for 35% and 43% of the variation found in longitudinal strength and MOE respectively, which means MFA has a certain extent effect on mechanical properties.

Shear-related fibrillogenesis of fibronectin

Biomechanical forces can induce the transformation of fibronectin (Fn) from its compact structure to an extended fibrillar state. Adsorption of plasma proteins onto metallic surfaces may also influence their conformation. We used a cone-plate rheometer to investigate the effect of shear and stainless steel on conformational changes of Fn. In control experiments, cones grafted once or twice with polyethylene glycol were used. Plasma Fn was added at concentrations of 50 or 100 μg/ml to bovine serum albumin (BSA)- or Fn-coated plates and subsequently exposed to dynamic shear rates stepwise increasing from 50 to 5000 s-1 within 5 min and subsequently decreasing from 5000 to 50 s-1 within 5 min. The viscosity (mPa s) of Fn solutions was recorded over 10 min. Upon exposure to shear, the viscosity in the sample increased, suggesting conformational changes in Fn. Western blotting and densitometric analyses demonstrated that conformational changes of plasma Fn depended both on shear and protein concentration. However, there was no significant difference in fibril formation between BSA- or Fn-coated plates, suggesting that physical properties of stainless steel and biomechanical forces such as shear can affect the molecular structure of Fn. Our model may provide useful information of surface- and flow-induced alterations of plasma proteins.

Electron holography study of the charging effect in microfibrils of sciatic nerve tissues

The charging effects of microfibrils of sciatic nerve tissues due to electron irradiation are investigated using electron holography. The phenomenon that the charging effects are enhanced with an increase of electron intensity is visualized through direct observations of the electric potential distribution around the specimen. The electric potential at the surface of the specimen could be quantitatively evaluated by simulation, which takes into account the reference wave modulation due to the long-range electric field.

[Elastin and microfibrils in vascular development and ageing: complementary or opposite roles?]

Large arteries allow the vascular system to be more than a simple route in which the blood circulates within the organism. The elastic fibers present in the wall endow these vessels with elasticity and are responsible for the smoothing of the blood pressure and flow, which are delivered discontinuously by the heart. This function is very important to ensure appropriate hemodynamics. Elastic fibers are composed of elastin (90%) and fibrillin-rich microfibrils (10%) which provide the vessels with elasticity and are also signals able to bind to relatively specific cell membrane receptors. Stimulation of the high affinity elastin receptor by elastin peptides or tropoelastin--the elastin precursor--triggers an increase in intracellular free calcium in vascular cells, especially endothelial cells, associated with attachment, migration or proliferation. Similar effects of the stimulation of endothelial cells by microfibrils or fibrillin-1 fragments, which bind to integrins, have been demonstrated. This dual function--mechanical and in signaling--makes the elastic fibers an important actor of the development and ageing processes taking place in blood vessels. An alteration of the elastin (Eln) or fibrillin (Fbn) gene products leads to severe genetic pathologies of the cardiovascular system, such as supravalvular aortic stenosis, or Williams Beuren syndrome--in which elastin deficiency induces aortic stenoses--or Marfan syndrome, in which on the contrary fibrillin-1 deficiency promotes the appearance of aortic aneurysms. Genetically-engineered mouse models of these pathologies (such as Eln+/- mice and Fbn-1+/mgΔ mice, Eln+/-Fbn-1+/- mice) have permitted a better understanding of the pathogenesis of these syndromes. In particular, it has been shown that elastin and fibrillin-1 roles can be complementary in some aspects, while they can be opposed in some other situations. For instance, the double heterozygosity in elastin and fibrillin-1 leads to increased arterial wall stress--compared to the level induced by one of these two deficiencies alone--while the decrease in diameter induced by Eln deficiency is partly compensated by an additional deficiency in Fbn-1. Also, it is now clear that early modifications of elastin or fibrillin-1 availability can alter the normal signaling action of these proteins and lead to long term modifications of the vascular physiology and ageing processes.

[Molecular mechanisms for the improvement of wound healing ability of periodontal ligament in Marfan's syndrome]

Marfan's syndrome (MFS) is a systemic disorder of the connective tissues caused by insufficient fibrillin-1 microfibril formation and can cause cardiac complications, emphysema, ocular lens dislocation and severe periodontal disease. ADAMTSL6β, a microfibril-associated extracellular matrix protein that has been implicated in fibrillin-1 microfibril assembly is able to improve microfibril insufficiency in MFS mice model. These findings suggest a new therapeutic strategy for the treatment of MFS through ADAMTSL6β-mediated fibrillin-1 microfibril assembly. We here review effect on ADAMTSL6β to the improvement of microfibril insufficiency in periodontal tissue as a model.

Genetic and functional linkage between ADAMTS superfamily proteins and fibrillin-1: a novel mechanism influencing microfibril assembly and function

Tissue microfibrils contain fibrillin-1 as a major constituent. Microfibrils regulate bioavailability of TGFβ superfamily growth factors and are structurally crucial in the ocular zonule. FBN1 mutations typically cause the Marfan syndrome, an autosomal dominant disorder manifesting with skeletal overgrowth, aortic aneurysm, and lens dislocation (ectopia lentis). Infrequently, FBN1 mutations cause dominantly inherited Weill-Marchesani syndrome (WMS), isolated ectopia lentis (IEL), or the fibrotic condition, geleophysic dysplasia (GD). Intriguingly, mutations in ADAMTS [a disintegrin-like and metalloprotease (reprolysin-type) with thrombospondin type 1 motif] family members phenocopy these disorders, leading to recessive WMS (ADAMTS10), WMS-like syndrome (ADAMTS17), IEL (ADAMTSL4 and ADAMTS17) and GD (ADAMTSL2). An ADAMTSL2 founder mutation causes Musladin-Lueke syndrome, a fibrotic disorder in beagle dogs. The overlapping disease spectra resulting from fibrillin-1 and ADAMTS mutations, interaction of ADAMTS10 and ADAMTSL2 with fibrillin-1, and evidence that these ADAMTS proteins accelerate microfibril biogenesis, constitutes a consilience suggesting that some ADAMTS proteins evolved to provide a novel mechanism regulating microfibril formation and consequently cell behavior.

Imaging of zebrafish in vivo with second-harmonic generation reveals shortened sarcomeres associated with myopathy induced by statin

We employed second-harmonic generation (SHG) imaging and the zebrafish model to investigate the myopathy caused by statin in vivo with emphasis on the altered microstructures of the muscle sarcomere, the fundamental contractile element of muscles. This approach derives an advantage of SHG imaging to observe the striated skeletal muscle of living zebrafish based on signals produced mainly from the thick myosin filament of sarcomeres without employing exogenous labels, and eliminates concern about the distortion of muscle structures caused by sample preparation in conventional histological examination. The treatment with statin caused a significantly shortened sarcomere relative to an untreated control (1.73±0.09 µm vs 1.91±0.08 µm, P<0.05) while the morphological integrity of the muscle fibers remained largely intact. Mechanistic tests indicated that this microstructural disorder was associated with the biosynthetic pathway of cholesterol, or, specifically, with the impaired production of mevalonate by statins. This microstructural disorder exhibited a strong dependence on both the dosage and the duration of treatment, indicating a possibility to assess the severity of muscle injury according to the altered length of the sarcomeres. In contrast to a conventional assessment of muscle injury using clinical biomarkers in blood, such as creatine kinase that is released from only disrupted myocytes, the ability to determine microstructural modification of sarcomeres allows diagnosis of muscle injury before an onset of conventional clinical symptoms. In light of the increasing prevalence of the incidence of muscle injuries caused by new therapies, our work consolidates the combined use of the zebrafish and SHG imaging as an effective and sensitive means to evaluate the safety profile of new therapeutic targets in vivo.

Initial fiber alignment pattern alters extracellular matrix synthesis in fibroblast-populated fibrin gel cruciforms and correlates with predicted tension

Human dermal fibroblasts entrapped in fibrin gels cast in cross-shaped (cruciform) geometries with 1:1 and 1:0.5 ratios of arm widths were studied to assess whether tension and alignment of the cells and fibrils affected ECM deposition. The cruciforms of contrasting geometry (symmetric vs. asymmetric), which developed different fiber alignment patterns, were harvested at 2, 5, and 10 weeks of culture. Cruciforms were subjected to planar biaxial testing, polarimetric imaging, DNA and biochemical analyses, histological staining, and SEM imaging. As the cruciforms compacted and developed fiber alignment, fibrin was degraded, and elastin and collagen were produced in a geometry-dependent manner. Using a continuum mechanical model that accounts for direction-dependent stress due to cell traction forces and cell contact guidance with aligned fibers that occurs in the cruciforms, the mechanical stress environment was concluded to influence collagen deposition, with deposition being the greatest in the narrow arms of the asymmetric cruciform where stress was predicted to be the largest.

Stress generation in the tension wood of poplar is based on the lateral swelling power of the G-layer

The mechanism of active stress generation in tension wood is still not fully understood. To characterize the functional interdependency between the G-layer and the secondary cell wall, nanostructural characterization and mechanical tests were performed on native tension wood tissues of poplar (Populus nigra x Populus deltoids) and on tissues in which the G-layer was removed by an enzymatic treatment. In addition to the well-known axial orientation of the cellulose fibrils in the G-layer, it was shown that the microfibril angle of the S2-layer was very large (about 36 degrees). The removal of the G-layer resulted in an axial extension and a tangential contraction of the tissues. The tensile stress-strain curves of native tension wood slices showed a jagged appearance after yield that could not be seen in the enzyme-treated samples. The behaviour of the native tissue was modelled by assuming that cells deform elastically up to a critical strain at which the G-layer slips, causing a drop in stress. The results suggest that tensile stresses in poplar are generated in the living plant by a lateral swelling of the G-layer which forces the surrounding secondary cell wall to contract in the axial direction.

SPARC Regulates Processing of Procollagen I and Collagen Fibrillogenesis in Dermal Fibroblasts

A characterization of the factors that control collagen fibril formation is critical for an understanding of tissue organization and the mechanisms that lead to fibrosis. SPARC (secreted protein acidic and rich in cysteine) is a counter-adhesive protein that binds collagens. Herein we show that collagen fibrils in SPARC-null skin from mice 1 month of age were inefficient in fibril aggregation and accumulated in the diameter range of 60-70 nm, a proposed intermediate in collagen fibril growth. In vitro, procollagen I produced by SPARC-null dermal fibroblasts demonstrated an initial preferential association with cell layers, in comparison to that produced by wild-type fibroblasts. However, the collagen I produced by SPARC-null cells was not efficiently incorporated into detergent-insoluble fractions. Coincident with an initial increase in cell association, greater amounts of total collagen I were present as processed forms in SPARC-null versus wild-type cells. Addition of recombinant SPARC reversed collagen I association with cell layers and decreased the processing of procollagen I in SPARC-null cells. Although collagen fibers formed on the surface of SPARC-null fibroblasts earlier than those on wild-type cells, fibers on SPARC-null fibroblasts did not persist. We conclude that SPARC mediates the association of procollagen I with cells, as well as its processing and incorporation into the extracellular matrix.

Effect of the Structural Water on the Mechanical Properties of Collagen-like Microfibrils: A Molecular Dynamics Study

The objective of this paper is to investigate the role played by the structural water on the intermolecular sliding between collagen-like 1QSU peptides in a microfibril under deformation. Three modes of deformation are used to generate intermolecular sliding: forced axial stretching (case I) or sliding (case II) of a central peptide monomer (while other surrounding monomers are fixed); and cantilever bending (case III) under a terminal lateral load. The force-displacement curve of each deformation mode is derived using a module called Steered Molecular Dynamics (SMD) in a molecular dynamics package NAMD under the CHARMM22 force field. Each calculation is carried out twice, one in the presence of structural water, one without. It is found that the structural water is a weak "lubricant" in forced axial stretching (case I), but it functions as a "glue" in forced axial sliding (case II) and cantilever bending (case III). A change in the pulling speed does not significantly alter the force-displacement behavior in axial stretching (case I) and sliding (case II), but it does in cantilever bending (case III). The additional resistance contributed by the structural water is attributed to the additional energy cost in breaking the water-mediated hydrogen bonds (water bridges).

Domains 16 and 17 of tropoelastin in elastic fibre formation

Naturally occurring mutations are useful in identifying domains that are important for protein function. We studied a mutation in the elastin gene, 800-3G>C, a common disease allele for SVAS (supravalvular aortic stenosis). We showed in primary skin fibroblasts from two different SVAS families that this mutation causes skipping of exons 16-17 and results in a stable mRNA. Tropoelastin lacking domains 16-17 (Delta16-17) was synthesized efficiently and secreted by transfected retinal pigment epithelium cells, but showed the deficient deposition into the extracellular matrix compared with normal as demonstrated by immunofluorescent staining and desmosine assays. Solid-phase binding assays indicated normal molecular interaction of Delta16-17 with fibrillin-1 and fibulin-5. However, self-association of Delta16-17 was diminished as shown by an elevated coacervation temperature. Moreover, negative staining electron microscopy confirmed that Delta16-17 was deficient in forming fibrillar polymers. Domain 16 has high homology with domain 30, which can form a beta-sheet structure facilitating fibre formation. Taken together, we conclude that domains 16-17 are important for self-association of tropoelastin and elastic fibre formation. This study is the first to discover that domains of elastin play an essential role in elastic fibre formation by facilitating homotypic interactions.

Electron holography on dynamic motion of secondary electrons around sciatic nerve tissues

By means of electron holographic visualization of detailed electric potential distribution around sciatic nerve tissues coated with C and OsO(4), we show that the steady state of these specimens subjected to intense charging with electron irradiation is accompanied with a dynamic motion of collective secondary electrons; the secondary electrons emitted from the coated specimens revolve around the positively charged specimens forming stationary orbits. Further, this study clarified the possibility of the direct visualization of a part of the orbits of the collective secondary electrons without disturbing their motions.

Ca2+ transient induced by extracellular changes in osmotic pressure in Arabidopsis leaves: differential involvement of cell wall-plasma membrane adhesion

We investigated the mechanism underlying the perception of extracellular changes in osmotic pressure in Vallisneria gigantea Graebner and transgenic Arabidopsis thaliana (L.) Heynh. expressing cytoplasmic aequorin. Hypertonic and hypotonic treatments of A. thaliana leaves each rapidly induced a Ca2+ transient. Both responses were essentially dependent on the presence of extracellular Ca2+ and were sensitive to Gd3+ a potential blocker of stretch-activated Ca2+ channels. Immediately after plasmolysis caused by hypertonic treatment and subsequent deplasmolysis caused by hypotonic treatment, the cells did not respond to a second hypertonic treatment and exhibited an impaired adhesion of the plasma membrane (PM) to the cell wall (CW). Recovery of the responsiveness required about 6 h. By contrast, no refractory phenomenon was observed in response to hypotonic treatment. Pretreatment with cellulase completely inhibited the Ca2+ transient induced by hypertonic treatment, but it did not affect the response to hypotonic treatment. V. gigantea mesophyll cells pretreated with cellulase exhibited an impaired adhesion of the PM to the CW. The leaf cells of multicellular plants can respond to both hypertonic and hypotonic treatments through the stretch-activated Ca2+ channels, whereas cellulase-sensitive adhesion of the PM to the CW is involved only in the response to hypertonic treatment.

Functional analysis of zebrafish microfibril-associated glycoprotein-1 (Magp1) in vivo reveals roles for microfibrils in vascular development and function

Mutations in fibrillin-1 (FBN1) result in Marfan syndrome, demonstrating a critical requirement for microfibrils in vessel structure and function. However, the identity and function of many microfibril-associated molecules essential for vascular development and function have yet to be characterized. In our morpholino-based screen for members of the secretome required for vascular development, we identified a key player in microfibril formation in zebrafish embryogenesis. Microfibril-associated glycoprotein-1 (MAGP1) is a conserved protein found in mammalian and zebrafish microfibrils. Expression of magp1 mRNA is detected in microfibril-producing cells. Analysis of a functional Magp1-mRFP fusion protein reveals localization along the midline and in the vasculature during embryogenesis. Underexpression and overexpression analyses demonstrate that specific Magp1 protein levels are critical for vascular development. Integrin function is compromised in magp1 morphant embryos, suggesting that reduced integrin-matrix interaction is the main mechanism for the vascular defects in magp1 morphants. We further show that Magp1 and fibrillin-1 interact in vivo. This study implicates MAGP1 as a key player in microfibril formation and integrity during development. The essential role for MAGP1 in vascular morphogenesis and function also supports a wide range of clinical applications, including therapeutic targets in vascular disease and cardiovascular tissue engineering.

Fibrillins: from biogenesis of microfibrils to signaling functions

Fibrillins are large proteins that form extracellular microfibril suprastructures ubiquitously found in elastic and nonelastic tissues. Mutations in fibrillin-1 and -2 lead to a number of heritable connective tissue disorders generally termed fibrillinopathies. Clinical symptoms in fibrillinopathies manifest in the skeletal, ocular, and cardiovascular systems and highlight the importance of fibrillins in development and homeostasis of tissues and organs, including blood vessels, bone, and eye. Microfibrils appear to have dual roles in (1) conferring mechanical stability and limited elasticity to tissues, and (2) modulating the activity of growth factors of the transforming growth factor beta (TGF-beta) superfamily. This chapter's focus is on the biogenesis of microfibrils, developmental expression patterns of fibrillins, signaling functions of microfibrils, and mouse models deficient in fibrillins.

Cellulose orientation determines mechanical anisotropy in onion epidermis cell walls

The role of cellulose microfibril orientation in determining cell wall mechanical anisotropy and in the control of the wall plastic versus elastic properties was studied in the adaxial epidermis of onion bulb scales using the constant-load (creep) test. The mean or net cellulose orientation in the outer periclinal wall of the epidermis was parallel to the long axis of the cells. In vitro cell wall extensibility was 30-90% higher in the direction perpendicular to the net microfibril orientation than parallel to it. This was the case for the size of the initial deformation occurring just after the load application and for the rate of time-dependent creep. Loading/unloading experiments confirmed the presence of a real irreversible component in cell wall extension. The plastic component of the time-dependent deformation was higher perpendicular to the net cellulose orientation than parallel to it. An acid buffer (pH 4.5) increased the creep rate by 25-30% but this response was not related to cellulose orientation. The present data provide direct evidence that the net orientation of cellulose microfibrils confers mechanical anisotropy to the walls of seed plants, a characteristic that may be relevant to understanding anisotropic cell growth.

Establishing and maintaining axial growth: wall mechanical properties and the cytoskeleton

Organ morphology depends on cell placement and directional cell expansion. Microtubules are involved in both of these processes so genetic approaches to understand the role microtubules play in organ expansion are not straightforward. Our use of the temperature-sensitive mor1-1 mutants led to the surprising discovery that Arabidopsis thaliana (L.) Heynh. root cells can establish and maintain transverse cellulose texture without well organized microtubule arrays. This work also demonstrated that cells can lose the ability to expand anisotropically without losing transversely oriented cellulose microfibrils. We suggest that microtubule disruption affects the cell's ability to generate long cellulose microfibrils, which may be essential for achieving growth anisotropy. Thus organ shape may depend not only on the orientation but also on the relative length of cellulose microfibrils during axis establishment and growth. More recent work has shown an important correlation between microtubule organization and the deposition patterns of the glycosylphosphatidylinositol (GPI)-anchored wall protein COBRA. Loss of microtubule organization is associated with the dissipation of transverse banding patterns of COBRA, suggesting that COBRA's function in maintaining anisotropic expansion may be microtubule-dependent.

Cell wall extension results in the coordinate separation of parallel microfibrils: evidence from scanning electron microscopy and atomic force microscopy

Enlargement of the cell wall requires separation of cellulose microfibrils, mediated by proteins such as expansin; according to the multi-net growth hypothesis, enlargement passively reorients microfibrils. However, at the molecular scale, little is known about the specific movement of microfibrils. To find out, we examined directly changes in microfibril orientation when walls were extended slowly in vitro under constant load (creep). Frozen-thawed cucumber hypocotyl segments were strained by 20-30% by incubation in pH 4.5 buffer or by incubation of heat-inactivated segments in alpha-expansin or a fungal endoglucanase (Cel12A). Subsequently, the innermost layer of the cell wall was imaged, with neither extraction nor homogenization, by field-emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). AFM images revealed that sample preparation for FESEM did not appreciably alter cell wall ultrastructure. In both FESEM and AFM, images from extended and non-extended samples appeared indistinguishable. To quantify orientational order, we used a novel algorithm to characterize the fast Fourier transform of the image as a function of spatial frequency. For both FESEM and AFM images, the transforms of non-extended samples were indistinguishable from those of samples extended by alpha-expansin or Cel12A, as were AFM images of samples extended by acidic buffer. We conclude that cell walls in vitro can extend slowly by a creep mechanism without passive reorientation of innermost microfibrils, implying that wall loosening agents act selectively on the cross-linking polymers between parallel microfibrils, rather than more generally on the wall matrix.

XTH acts at the microfibril-matrix interface during cell elongation

Sulphorhodamine-labelled oligosaccharides of xyloglucan are incorporated into the cell wall of Arabidopsis and tobacco roots, and of cultured Nicotiana tabacum cells by the transglucosylase (XET) action of XTHs. In the cell wall of diffusely growing cells, the subcellular pattern of XET action revealed a 'fibrillar' pattern, different from the xyloglucan localization. The fibrillar fluorescence pattern had no net orientation in spherical cultured cells. It changed to transverse to the long axis when the cells started to elongate, a feature mirroring the rearrangements of cortical microtubules and the accompanying cellulose deposition. Interference with the polymerization of microtubules and with cellulose deposition inhibited this strong and 'fibrillar'-organized XET-action, whereas interference with actin-polymerization only decreased the intensity of enzyme action. Epidermal cells of a mutant with reduced cellulose synthesis also had low XET action. Root hairs (tip-growing cells) exhibited high XET-action over all their length, but lacked the specific parallel pattern. In both diffuse- and tip-growing cell types extraction of the incorporated fluorescent xyloglucans by a xyloglucan-specific endoglucanase reduced the fluorescence, but the 'fibrillar' appearance in diffuse growing cells was not eliminated. These results show that XTHs act on the xyloglucans attached to cellulose microfibrils. After incorporation of the fluorescent oligosaccharides, the xyloglucans decorate the cellulose microfibrils and become inaccessible to hydrolytic enzymes.

Mechanical adaptations of cleavers (Galium aparine)

BACKGROUND AND AIMS

Cleavers (Galium aparine) is a fast-growing herbaceous annual with a semi-self-supporting, scrambling-ascending growth habit. Mature plants often use upright species for support. It is common in hedgerows and on waste ground. This study aims to characterize the mechanical behaviour of the stem and roots of cleavers and relate this to the arrangement of structural tissue, the net microfibrillar orientations in the cell walls, and plant growth habit.

METHODS

The morphology and mechanics of mature cleavers was investigated using plants grown in pots and ones collected from the grounds at the University of Lincoln, Lincoln, UK. Tensile tests were carried out on the stem and the basal section of the first-order lateral roots. The net orientation of cellulose microfibrils in the cell walls was investigated using polarized light microscopy.

KEY RESULTS

Results show that the basal regions of the stem and first-order lateral roots were highly extensible. Breaking strains of 24 +/- 7% were recorded for the stem base and 28 +/- 6% for the roots. Anatomical observations showed that the lower stem (base + 100 mm) was circular in cross-section with a solid central core of vascular tissue, whereas further up the stem the transverse section showed a typical four-angled shape with a ring-like arrangement of vascular tissue and sclerenchyma bundles in the corners. The net orientation of wall microfibrils in the secondary xylem diverges from the longitudinal by between 8 and 9 degrees .

CONCLUSIONS

The basal region of the stem of cleavers is highly extensible, but the mechanism by which the stem is able to withstand such high breaking strains is unclear; reorientation of the cellulose fibrils in the stem along the axis of loading is not thought to be responsible.

Microfibrils at basement membrane zones interact with perlecan via fibrillin-1

Mutational defects in fibrillin-rich microfibrils give rise to a number of heritable connective tissue disorders, generally termed microfibrillopathies. To understand the pathogenesis of these microfibrillopathies, it is important to elucidate the supramolecular composition of microfibrils and their interaction properties with extracellular matrix components. Here we demonstrate that the proteoglycan perlecan is an associated component of microfibrils typically close to basement membrane zones. Double immunofluorescence studies demonstrate colocalization of fibrillin-1, the major backbone component of microfibrils, with perlecan in fibroblast cultures as well as in dermal and ocular tissues. Double immunogold labeling further confirms colocalization of perlecan to microfibrils in various tissues at the ultrastructural level. Extraction studies revealed that perlecan is not covalently associated with microfibrils. High affinity interactions between fibrillin-1 and perlecan were found by kinetic binding studies with dissociation constants in the low nanomolar range. A detailed mapping study of the interaction epitopes by solid phase binding assays primarily revealed interactions of perlecan domains I and II with a central region of fibrillin-1. Analysis of perlecan null embryos showed less microfibrils at the dermal-epidermal junction as compared with wild-type littermates. The data presented indicate a functional significance for perlecan in anchoring microfibrils to basement membranes and in the biogenesis of microfibrils.

Fibrillin microfibrils

Fibrillin microfibrils are widely distributed extracellular matrix assemblies that endow elastic and nonelastic connective tissues with long-range elasticity. They direct tropoelastin deposition during elastic fibrillogenesis and form an outer mantle for mature elastic fibers. Microfibril arrays are also abundant in dynamic tissues that do not express elastin, such as the ciliary zonules of the eye. Mutations in fibrillin-1-the principal structural component of microfibrils-cause Marfan syndrome, a heritable disease with severe aortic, ocular, and skeletal defects. Isolated fibrillin-rich microfibrils have a complex 56 nm "beads-on-a-string" appearance; the molecular basis of their assembly and elastic properties, and their role in higher-order elastic fiber formation, remain incompletely understood.

Elastin

Elastin is a key extracellular matrix protein that is critical to the elasticity and resilience of many vertebrate tissues including large arteries, lung, ligament, tendon, skin, and elastic cartilage. Tropoelastin associates with multiple tropoelastin molecules during the major phase of elastogenesis through coacervation, where this process is directed by the precise patterning of mostly alternating hydrophobic and hydrophilic sequences that dictate intermolecular alignment. Massively crosslinked arrays of tropoelastin (typically in association with microfibrils) contribute to tissue structural integrity and biomechanics through persistent flexibility, allowing for repeated stretch and relaxation cycles that critically depend on hydrated environments. Elastin sequences interact with multiple proteins found in or colocalized with microfibrils, and bind to elastogenic cell surface receptors. Knowledge of the major stages in elastin assembly has facilitated the construction of in vitro models of elastogenesis, leading to the identification of precise molecular regions that are critical to elastin-based protein interactions.

Progress in understanding the role of microtubules in plant cells

Microtubules have long been known to play a key role in plant cell morphogenesis, but just how they fulfill this function is unclear. Transverse microtubules have been thought to constrain the movement of cellulose synthase complexes in order to generate transverse microfibrils that are essential for elongation growth. Surprisingly, some recent studies demonstrate that organized cortical microtubules are not essential for maintaining or re-establishing transversely oriented cellulose microfibrils in expanding cells. At the same time, however, there is strong evidence that microtubules are intimately associated with cellulose synthesis activity, especially during secondary wall deposition. These apparently conflicting results provide important clues as to what microtubules do at the interface between the cell and its wall. I hypothesize that cellulose microfibril length is an important parameter of wall mechanics and suggest ways in which microtubule organization may influence microfibril length. This concept is in line with current evidence that links cellulose synthesis levels and microfibril orientation. Furthermore, in light of new evidence showing that a wide variety of proteins bind to microtubules, I raise the broader question of whether a major function of plant microtubules is in modulating signaling pathways as plants respond to sensory inputs from the environment.

Membrane-wall attachments in plasmolysed plant cells

Field emission scanning electron microscopy of plasmolysed Tradescantia virginiana leaf epidermal cells gave novel insights into the three-dimensional architecture of Hechtian strands, Hechtian reticulum, and the inner surface of the cell wall without the need for extraction. At high magnification, we observed fibres that pin the plasma membrane to the cell wall after plasmolysis. Treatment with cellulase caused these connecting fibres to be lost and the pinned out plasma membrane of the Hechtian reticulum to disintegrate into vesicles with diameters of 100-250 nm. This suggests that the fibres may be cellulose. After 4 h of plasmolysis, a fibrous meshwork that labelled with anti-callose antibodies was observed within the space between the plasmolysed protoplast and the cell wall by field emission scanning electron microscopy. Interestingly, macerase-pectinase treatment resulted in the loss of this meshwork, suggesting that it was stabilised by pectins. We suggest that cellulose microfibrils extending from strands of the Hechtian reticulum and entwining into the cell wall matrix act as anchors for the plasma membrane as it moves away from the wall during plasmolysis.

Roles of microtubules and cellulose microfibril assembly in the localization of secondary-cell-wall deposition in developing tracheary elements

The roles of cellulose microfibrils and cortical microtubules in establishing and maintaining the pattern of secondary-cell-wall deposition in tracheary elements were investigated with direct dyes to inhibit cellulose microfibril assembly and amiprophosmethyl to inhibit microtubule polymerization. When direct dyes were added to xylogenic cultures of Zinnia elegans L. mesophyll cells just before the onset of differentiation, the secondary cell wall was initially secreted as bands composed of discrete masses of stained material, consistent with immobilized sites of cellulose synthesis. The masses coalesced, forming truncated, sinuous or smeared thickenings, as secondary cell wall deposition continued. The absence of ordered cellulose microfibrils was confirmed by polarization microscopy and a lack of fluorescence dichroism as determined by laser scanning microscopy. Indirect immunofluorescence showed that cortical microtubules initially subtended the masses of dye-altered secondary cell wall material but soon became disorganized and disappeared. Although most of the secondary cell wall was deposited in the absence of subtending cortical microtubules in dye-treated cells, secretion remained confined to discrete regions of the plasma membrane. Examination of non-dye-treated cultures following application of microtubule inhibitors during various stages of secondary-cell-wall deposition revealed that the pattern became fixed at an early stage such that deposition remained localized in the absence of cortical microtubules. These observations indicate that cortical microtubules are required to establish, but not to maintain, patterned secondary-cell-wall deposition. Furthermore, cellulose microfibrils play a role in maintaining microtubule arrays and the integrity of the secondary-cell-wall bands during deposition.

Fibrillin microfibrils: multipurpose extracellular networks in organismal physiology

Organismal physiology depends significantly on the proper assembly of extracellular matrix (ECM) macroaggregates that impart structural integrity to the connective tissue. Recent genetic studies in mice have unraveled unsuspected new functions of architectural matrix components in regulating signaling events that modulate patterning, morphogenesis, and growth of several organ systems. As a result, a new paradigm has emerged whereby tissue-specific organization of the ECM dictates not only the physical properties of the connective tissue, but also the ability of the matrix to direct a broad spectrum of cellular activities through the regulation of growth factor signaling. These observations pave the way to novel therapeutic approaches aimed at counteracting the deleterious consequences of perturbations of connective tissue homeostasis.

Fibrillin-1 expression in normal and fibrotic rat liver and in cultured hepatic fibroblastic cells: modulation by mechanical stress and role in cell adhesion

Fibrillin-1, together with elastin, is the main component of elastic fibers found throughout the extracellular space and responsible for the biomechanical properties of most tissues and organs. In this work, fibrillin-1 expression and modulation were explored in experimental rat liver fibrosis and in vitro; furthermore, the role of fibrillin-1 fragments on cell adhesion was analyzed. Fibrosis was induced by subjecting rats to common bile duct ligation for 72 h and 7 days or carbon tetrachloride (CCl(4)) treatment for 2 and 6 weeks. Immunohistochemistry showed that, after bile duct ligation, fibrillin-1, elastin, and alpha-smooth muscle actin colocalized in the developing portal connective tissue. In CCl(4)-treated animals, a similar colocalization was observed in septa; however, elastin deposition was not observed around activated alpha-smooth muscle actin-positive stellate cells of the parenchyma. Treatment with the profibrogenic mediator transforming growth factor-beta1 (TGF-beta1) greatly increased the fibrillin-1 expression of cultured liver fibroblasts. The level of fibrillin-1 expression was significantly higher in cells grown in restrained (stressed) collagen lattices compared with those grown in unrestrained collagen lattices. Cell adhesion on the C-terminal fragment of fibrillin-1 containing the RGD sequence (rF6H) slightly increased (between 0.3 and 2.5 microg/ml) and decreased at higher concentrations, while adhesion on the N-terminal fragment of fibrillin-1 (rF16) was dose-dependently decreased. In addition, the rF16 fragment decreased cell adhesion to fibronectin. In conclusion, our study illustrates the important deposition of fibrillin-1 that occurs in two mechanistically distinct settings of liver fibrogenesis. Furthermore, the induction of fibrillin-1 expression by TGF-beta1 and mechanical stress, and the antiadhesive properties of fibrillin-1 fragments suggest important implications for physiological and pathological fibrillin-1 catabolism during tissue remodeling.

Fine tuning of growth factor signals depends on fibrillin microfibril networks

Growth factors, potent regulators of cell differentiation, tissue morphogenesis, tissue homeostasis, and cellular response to injury, reside in the extracellular matrix. Genetic evidence in humans and mice as well as biochemical data implicate fibrillins and LTBPs in the extracellular control of TGFbeta and BMP signaling. Fibrillins and LTBPs form tissue-specific and temporally regulated microfibril networks. In the developing embryo, three fibrillins and four LTBPs contribute molecular heterogeneity to microfibril networks, and provide different templates upon which TGFbeta-related growth factors can be positioned. By accommodating this molecular heterogeneity, microfibril architecture can orchestrate a variety of different signals in very specific tissue locations. Human fibrillinopathies display a broad phenotypic spectrum from tall to short stature, from hypermobile joints to joint contractures and stiffness, and from severe to mild or no cardiovascular manifestations. A spectrum of growth factor dysregulation may be caused by differential effects of mutations in fibrillins on microfibril architecture, thus altering appropriate targeting or positioning of growth factors within microfibril networks. Growth factor dysregulation may help to explain the broad phenotypic spectrum of the fibrillinopathies.

Tensile properties of Arabidopsis cell walls depend on both a xyloglucan cross-linked microfibrillar network and rhamnogalacturonan II-borate complexes

The mechanical properties of plant organs depend upon anatomical structure, cell-cell adhesion, cell turgidity, and the mechanical properties of their cell walls. By testing the mechanical responses of Arabidopsis mutants, it is possible to deduce the contribution that polymers of the cell wall make to organ strength. We developed a method to measure the tensile parameters of the expanded regions of turgid or plasmolyzed dark-grown Arabidopsis hypocotyls and applied it to the fucose biosynthesis mutant mur1, the xyloglucan glycosyltransferase mutants mur2 and mur3, and the katanin mutant bot1. Hypocotyls from plants grown in the presence of increasing concentrations of dichlorobenzonitrile, an inhibitor of cellulose synthesis, were considerably weakened, indicating the validity of our approach. In order of decreasing strength, the hypocotyls of mur2 > bot1 and mur1 > mur3 were each found to have reduced strength and a proportionate reduction in modulus compared with wild type. The tensile properties of the hypocotyls and of the inflorescence stems of mur1 were rescued by growth in the presence of high concentrations of borate, which is known to cross-link the pectic component rhamnogalacturonan II. From comparison of the mechanical responses of mur2 and mur3, we deduce that galactose-containing side chains of xyloglucan make a major contribution to overall wall strength, whereas xyloglucan fucosylation plays a comparatively minor role. We conclude that borate-complexed rhamnogalacturonan II and galactosylated xyloglucan contribute to the tensile strength of cell walls.

Mechanical, chemical and X-ray analysis of wood in the two tropical lianas Bauhinia guianensis and Condylocarpon guianense: variations during ontogeny

Mechanical and chemical properties as well as microfibril angles of wood tissues from different ontogenetic stages are determined for the neotropical lianas Bauhinia guianensis and Condylocarpon guianense. The mechanical properties include the elastic moduli under bending and under dynamic torsion. The chemical analyses cover (i) the content of cellulose, lignin and hemicelluloses fractions, (ii) the monomeric composition of the uncondensed lignin, and (iii) the composition of the hemicelluloses with respect to neutral monosaccharides. By comparing the wood properties of these lianas with the corresponding properties of wood from self-supporting deciduous trees, common characteristics and differences are revealed. Additionally, the changes in the lignin and polysaccharides fractions as well as the variations in microfibril orientation that occur during ontogeny of the two liana species are discussed with regard to their implications for the mechanical properties of wood.

A mechanics model for the compression of plant and vegetative tissues

The mechanics analysis of plant or vegetable tissue under a compressive stress has been developed based on large deformation elasticity theory. The tissue was treated as a lattice of regular perfect three-dimensional hexagonal cells. The cell walls were assumed to be impermeable under the time-scale of the loading. The cell walls of plants and vegetables are polymeric composite materials, consisting of a relatively amorphous matrix and a highly structured network of microfibrils embedded in the cell wall matrix. The micromechanical features of the individual cells have been related to the macroscopic properties of the whole tissue. The effects of microfibrillar stiffening factors k(1) and k(2), the cell wall matrix property alpha and the initial cell expansion ratio nu(i) on the compressive behaviour of a plant or vegetable tissue have been investigated. The predicted results have also been related to some experimental evidence.

Modeling the tensile mechanical behavior of bone along the longitudinal direction

The tensile stress-strain behavior of bone along its longitudinal axis is modeled by using a simple shear-lag theory, wherein, stresses and strains in a unit cell consisting of an organic matrix reinforced by overlapped mineral platelets are computed. It is assumed that loads are transferred between overlapped mineral-platelets by shear in the organic matrix. The mechanical behavior of bone in which the matrix partially or completely debonds from the sides of the overlapped mineral platelets (after an ultimate interfacial shear stress value is exceeded) is modeled. It is shown that the tensile mechanical behavior of bone can be modeled only by assuming little or no debonding of the organic from the mineral. A physical phenomenon that explains the tensile behavior of bone is, after the interfacial shear stress has reached a constant value over the length of the mineral platelets, the collagen molecules/microfibrils (with the associated mineral platelets) move relative to one another. The tensile stress-strain curve of bovine bone is modeled using this model. The theory predicts the mechanical behavior of the tissue in the elastic, yield and post-yield region. The ultimate strain and strengths are not predicted in the present model.

Temporal variation of microfibril angle in Eucalyptus nitens grown in different irrigation regimes

In 1990, a 2-ha plantation of Eucalyptus nitens (Deane and Maiden) Maiden was established in southeastern Tasmania and subjected to different irrigation regimes. Point dendrometers were installed in March 1995 to monitor radial stem movement every 15 min over several growing seasons. In this study, data from two growing seasons (1996-1998) were considered. From these measurements, daily increments of stem radius were determined. At the end of the second growing season, we extracted 12-mm cores and measured microfibril angles (MFA) of the wood at high resolution. Microfibril angles were rescaled on a time axis and mapped to daily and distance-based elements. Among treatments, irrigated trees in particular formed higher MFA early in the growing season (September-November) and lower MFA later in the growing season. Trees subjected to cyclic droughts showed clear relationships between MFA and soil water deficits, with MFA increasing in response to water stress release. Increases in MFA were preceded by accelerations in daily increment of stem radius. Among treatments, trees subjected to severe drought had the smallest MFA and generally low fluctuations in MFA. Irrigated trees were susceptible to changes in climate, whereas growth of the trees in the other treatments was limited by water availability. Use of path-analysis showed that temperature had an effect on stem radius increment but not on MFA; wind speed was the only factor that influenced MFA directly. Microfibril angle was correlated with stem shrinking and expansion phases; growth period length and growth rates were positively related to MFA.

Islet amyloid: phase partitioning and secondary nucleation are central to the mechanism of fibrillogenesis

Islet amyloid polypeptide (IAPP) contributes to the pathogenesis of type II diabetes by depositing as cytotoxic amyloid fibers in the endocrine pancreas. Fiber formation occurs with a marked conformational change from an unstructured precursor. Using real-time quantitative kinetic methods, fibrillogenesis was characterized as a function of protein, denaturant, and seed concentration. Several observations are in sharp contrast to the expectations for nucleation-dependent polymerization. First, the half-time of conversion for both de novo and seeded kinetics were found to be independent of protein concentration. Second, while elongation kinetics scale linearly with protein concentration, they are relatively insensitive to changes in the total seed concentration. Third, seeded bypass of de novo fiber formation kinetics shows a lag phase. The seeded lag phase is eliminated by a time delay before the introduction of seed to a de novo reaction. Last, conversion is highly cooperative, with the time required for 10-90% conversion occurring much faster than the lag time. At a minimum, four kinetic steps are required to describe these observations: activation, fiber independent nucleation, fiber-dependent nucleation, and elongation. Furthermore, we invoke a phase transition in which protein initially forms an off-pathway dispersion. This single construct allows us to model both the concentration independence of the de novo reaction time and the first-order concentration dependence of the elongation kinetics. Marked acceleration of this reaction by hexafluoro-2-propanol reinforces this view by altering the relative solubility of the two phases and/or by stabilizing hydrogen-bonded structures in the transition states of the reaction pathway.

Function-structure relationship of elastic arteries in evolution: from microfibrils to elastin and elastic fibres

Evolution of species has led to the appearance of circulatory systems including blood vessels and one or more pulsatile pumps, typically resulting in a low-pressurised open circulation in most invertebrates and a high-pressurised closed circulation in vertebrates. In both open and closed circulations, the large elastic arteries proximal to the heart damp out the pulsatile flow and blood pressure delivered by the heart, in order to limit distal shear stress and to allow regular irrigation of downstream organs. To achieve this goal, networks of resilient and stiff proteins adapted to each situation--i.e. low or high blood pressure--have been developed in the arterial wall to provide it with non-linear elasticity. In the low-pressurised circulation of some invertebrates, the mechanical properties of arteries can almost be entirely microfibril-based, whereas, in high-pressurised circulations, they are due to an interplay between a highly resilient protein, an elastomer in the octopus and elastin in most vertebrates, and the rather stiff protein collagen. In vertebrate development, elastin is incorporated in elastic fibres, on a earlier deposited scaffold of microfibrils. The elastic fibres are then arranged in functional concentric elastic lamellae and, with the smooth muscle cells, lamellar units. The microfibrils may also play a direct functional role in all mature arteries of high- and low-pressurised circulations. Finally, since blood pressure regularly increases with developmental stages, it appears possible that the early deposition of microfibrils, which are highly-conserved in evolution, corresponds, at least in part, to an early microfibril-driven elasticity in low-pressurised arteries, present across species. In vertebrates, when pressure developmentally rises above a threshold value, the vascular wall stress may turn on the expression of other resilient protein genes, including the elastin gene. Elastin would then be deposited on microfibrils and resulting in the elastic fibre network and elastic lamellae whose mechanical properties are adapted to allow for proper arterial work at higher pressures.

Cellulose microfibrils in plants: biosynthesis, deposition, and integration into the cell wall

Cellulose occurs in all higher plants and some algae, fungi, bacteria, and animals. It forms microfibrils containing the crystalline allomorphs, cellulose I alpha and I beta. Cellulose molecules are 500-15,000 glucose units long. What controls molecular size is unknown. Microfibrils are elongated by particle rosettes in the plasma membrane (cellulose synthase complexes). The precursor, UDP-glucose, may be generated from sucrose at the site of synthesis. The biosynthetic mechanism may involve lipid-linked intermediates. Cellulose synthase has been purified from bacteria, but not from plants. In plants, disrupted cellulose synthase may form callose. Cellulose synthase genes have been isolated from bacteria and plants. Cellulose-deficient mutants have been characterised. The deduced amino acid sequence suggests possible catalytic mechanisms. It is not known whether synthesis occurs at the reducing or nonreducing end. Endoglucanase may play a role in synthesis. Nascent cellulose molecules associate by Van der Waals and hydrogen bonds to form microfibrils. Cortical microtubules control microfibril orientation, thus determining the direction of cell growth. Self-assembly mechanisms may operate. Microfibril integration into the wall occurs by interactions with matrix polymers during microfibril formation.

Cortical microtubules form a dynamic mechanism that helps regulate the direction of plant growth

Plants form an axis by controlling the direction of cell expansion; this depends on the way in which cellulose microfibrils in the wall resist stretching in particular directions. In turn, the alignment of cellulose microfibrils correlates strongly with the alignment of plasma membrane-associated microtubules, which therefore seem to act as templates for laying down the wall fibrils. Microtubules are now known to be quite dynamic, and to reorient themselves between transverse and longitudinal alignments. Plants "steer" the direction of growth by reorienting the cellulose/microtubule machinery. For example, the model predicts that a transverse reorientation on one flank of an organ and a longitudinal orientation on the other should lead to bending. This response has recently been observed in living, gravistimulated maize coleoptiles microinjected with fluorescent microtubule protein. This paper reviews the idea of the dynamic microtubule template and discusses possible mechanisms of reorientation. Recent biochemical work has shown that microtubules are decorated with different classes of associated proteins, whose potential roles are outlined.

Mechanical forces in plant growth and development

Plant cells perceive forces that arise from the environment and from the biophysics of plant growth. These forces provide meaningful cues that can affect the development of the plant. Seedlings of Arabidopsis thaliana were used to examine the cytoplasmic tensile character of cells that have been implicated in the gravitropic response. Laser-trapping technology revealed that the starch-containing statoliths of the central columella cells in root caps are held loosely within the cytoplasm. In contrast, the peripheral cells have starch granules that are relatively resistant to movement. The role of the actin cytoskeleton in affecting the tensile character of these cells is discussed. To explore the role that biophysical forces might play in generating developmental cues, we have developed an experimental model system in which protoplasts, embedded in a synthetic agarose matrix, are subjected to stretching or compression. We have found that protoplasts subjected to these forces from five minutes to two hours will subsequently elongate either at right angles or parallel to the tensive or compressive force vector. Moreover, the cortical microtubules are found to be organized either at right angles or parallel to the tensive or compressive force vector. We discuss these results in terms of an interplay of information between the extracellular matrix and the underlying cytoskeleton.

From hormone signal, via the cytoskeleton, to cell growth in single cells of tobacco

Cultured mesophyll protoplasts of Nicotiana tabacum L. can be hormonally induced into different developmental pathways. In a medium containing auxins (NAA) and cytokinins (BAP) cells divide and eventually give rise to calli. When only auxins are present cells elongate and finally differentiate into very long tubular cells. We focused on the sequence of events leading to elongation. When cultured in a high (1 mg/l) auxin concentration elongating cells seem to pass a certain threshold and increase their nuclear DNA up to about 16C. Cells cultured in a low (0.065 mg/l) auxin concentration only have C-values up to 4C, are unable to pass this threshold and finally fail to elongate. Besides the concentration dependence of the auxin signal, the efflux of auxin seems to be necessary for elongation since addition of TIBA drastically reduces the amount of elongating cells. Concomitant with the changes in nuclear physiology, auxin-induced axiality is seen as sequential rearrangements of microtubules and actin-filaments and of cell wall cellulose microfibrils from 'randomly' arranged in spherical cells to an orientation perpendicular to the long axis of elongating cells.