Effective interactions between chaotropic agents and proteins

Multifaceted separations approach for elucidation of the physical and chemical properties of extracellular hydrocolloids

A multifaceted separations platform that incorporates the strengths of asymmetrical flow field-flow fractionation with multi-detectors (AF4-MD), high performance anion exchange chromatography (HPAEC), and hydrophilic interaction liquid chromatography with mass spectrometry (HILIC-MS) is developed to obtain a more complete picture of the molecular weights (MW), composition, and salt-induced aggregation behavior of extracellular polymeric substances (EPS) produced by the algae Chlorella vulgaris. The absence of a stationary phase makes AF4-MD particularly well suited for characterizing polydisperse hydrocolloid polymers as well as studies that investigate the effect of ionic environments that aligns with the natural environment of C. vulgaris. Fractionation of C. vulgaris EPS revealed three distinct MW populations ranging from 4 × 10⁴ to 3 × 10⁸ Daltons. This exceeds the previously reported MW by three orders of magnitude and reports a previously unknown size subpopulation. The optimized AF4-MD technique was then used to produce two size fractions that were probed using HPAEC and LC-MS. These orthogonal methods uncovered compositional heterogeneity across fractions, with variations in monosaccharides and amino acids. AF4-MD is also well suited for studying the behavior of EPS in the presence of different salts. For each salt studied, e.g., NaNO3, NaCl, and MgCl2, an increase in solution ionic strength results in aggregation as corroborated by a shift to higher MWs. Each salt exhibited distinct effects on EPS aggregation, with NaCl causing the least aggregation and MgCl2 the most. These findings highlight the need for multiple techniques when analyzing complex polymers such as EPS and the benefits of AF4-MD in elucidating complex polymer behaviors in different ionic environments.

A Review on the Stability Challenges of Advanced Biologic Therapeutics

Advanced biotherapeutic systems such as gene therapy, mRNA lipid nanoparticles, antibody-drug conjugates, fusion proteins, and cell therapy have proven to be promising platforms for delivering targeted biologic therapeutics. Preserving the intrinsic stability of these advanced therapeutics is essential to maintain their innate structure, functionality, and shelf life. Nevertheless, various challenges and obstacles arise during formulation development and throughout the storage period due to their complex nature and sensitivity to various stress factors. Key stability concerns include physical degradation and chemical instability due to various factors such as fluctuations in pH and temperature, which results in conformational and colloidal instabilities of the biologics, adversely affecting their quality and therapeutic efficacy. This review emphasizes key stability issues associated with these advanced biotherapeutic systems and approaches to identify and overcome them. In gene therapy, the brittleness of viral vectors and gene encapsulation limits their stability, requiring the use of stabilizers, excipients, and lyophilization. Keeping cells viable throughout the whole cell therapy process, from culture to final formulation, is still a major difficulty. In mRNA therapeutics, stabilization strategies such as the optimization of mRNA nucleotides and lipid compositions are used to address the instability of both the mRNA and lipid nanoparticles. Monoclonal antibodies are colloidally and conformationally unstable. Hence, buffers and stabilizers are useful to maintain stability. Although fusion proteins and monoclonal antibodies share structural similarities, they show a similar pattern of instability. Antibody-drug conjugates possess issues with conjugation and linker stability. This review outlines the stability issues associated with advanced biotherapeutics and provides insights into the approaches to address these challenges.

Formation of molecularly imprinted polymers: Strategies applied for the removal of protein template (review)

The key step in the entire molecularly imprinted polymer (MIP) preparation process is the formation of the complementary cavities in the polymer matrix through the template removal process. The template is removed using chemical treatments, leaving behind selective binding sites for target molecules within the polymer matrix. Other MIP preparation steps include mixing monomers and template molecules in the appropriate solvent(s), monomer-template complex equilibration, and polymerisation of the monomers around the template. However, template removal is the most important among all the preparation steps because the final structure, which can be accepted and recognised as the MIP, is obtained only after the template removal. A thorough analysis of the studies dedicated to MIP applications demonstrates that this MIP preparation step, namely the template removal, is relatively understudied. MIP template removal is especially challenging in the synthesis, where the molecular template is a macromolecule such as a protein. This review aims to provide a deliberate, systematic, and consistent overview of protein removal as the MIP template molecules. The most prevalent template removal methods are outlined for removing protein templates from electrochemically synthesised MIPs, particularly thin layers on electrodes used in electrochemical sensors. Five protein template removal approaches involving chemical treatment are highlighted, which include the utilisation of (i) chaotropic agents, (ii) salt, (iii) acidic cleavage, (iv) alkaline, and finally, (v) proteolytic treatment focusing on studies conducted over the past decade. In addition, we discuss the interactions driving the removal of protein templates in each approach and associated challenges. This review provides insights into MIPs protein template removal strategies while highlighting the prevalent issue of this understudied step of template removal.

The significance of antigen-antibody-binding avidity in clinical diagnosis

Immunoglobulin G (IgG) and immunoglobulin M (IgM) testing are commonly used to determine infection status. Typically, the detection of IgM indicates an acute or recent infection, while the presence of IgG alone suggests a chronic or past infection. However, relying solely on IgG and IgM antibody positivity may not be sufficient to differentiate acute from chronic infections. This limitation arises from several factors. The prolonged presence of IgM can complicate diagnostic interpretations, and false positive IgM results often arise from antibody cross-reactivity with various antigens. Additionally, IgM may remain undetectable in prematurely collected samples or in individuals who are immunocompromised, further complicating accurate diagnosis. As a result, additional diagnostic tools are required to confirm infection status. Avidity is a measure of the strength of the binding between an antigen and antibody. Avidity-based assays have been developed for various infectious agents, including toxoplasma, cytomegalovirus (CMV), SARS-CoV-2, and avian influenza, and are promising tools in clinical diagnostics. By measuring the strength of antibody binding, they offer critical insights into the maturity of the immune response. These assays are instrumental in distinguishing between acute and chronic or past infections, monitoring disease progression, and guiding treatment decisions. The development of automated platforms has optimized the testing process by enhancing efficiency and minimizing the risk of manual errors. Additionally, the recent advent of real-time biosensor immunoassays, including the label-free immunoassays (LFIA), has further amplified the capabilities of these assays. These advances have expanded the clinical applications of avidity-based assays, making them useful tools for the diagnosis and management of various infectious diseases. This review is structured around several key aspects of IgG avidity in clinical diagnosis, including: (i) a detailed exposition of the IgG affinity maturation process; (ii) a thorough discussion of the IgG avidity assays, including the recently emerged biosensor-based approaches; and (iii) an examination of the applications of IgG avidity in clinical diagnosis. This review is intended to contribute toward the development of enhanced diagnostic tools through critical assessment of the present landscape of avidity-based testing, which allows us to identify the existing knowledge gaps and highlight areas for future investigation.

Clear insight into complex multimodal resins and impurities to overcome recombinant protein purification challenges: A review

Increasing attention has been paid to the purity of therapeutic proteins imposing extensive costs and challenges to the downstream processing of biopharmaceuticals. One of the efforts, that has been exerted to overcome such limitations, was developing multimodal or mixed-mode chromatography (MMC) resins for launching selective, orthogonal, non-affinity purification platforms. Despite relatively extensive usage of MMC resins, their real potential and fulfillment have not been extensively reviewed yet. In this work, the explanation of practical and key aspects of downstream processing of recombinant proteins with or without MMC resins was debated, as being useful for further purification process development. This review has been written as a step-by-step guide to deconvolute both inherent protein purification and MMC complexities. Here, after complete elucidation of the potential of MMC resins, the effects of frequently used additives (mobile phase modifiers) and their possible interactions during the purification process, the critical characteristics of common product-related impurities (e.g., aggregates, charge variants, fragments), host-related impurities (e.g., host cell protein and DNA) and process related impurities (e.g., endotoxin, and viruses) with solved or unsolved challenges of traditional and MMC resins have been discussed. Such collective experiences which are reported in this study could be considered as an applied guide for developing successful downstream processing in challenging conditions by providing a clear insight into complex MMC resins and impurities.

INSIHGT: an accessible multi-scale, multi-modal 3D spatial biology platform

Biological systems are complex, encompassing intertwined spatial, molecular and functional features. However, methodological constraints limit the completeness of information that can be extracted. Here, we report the development of INSIHGT, a non-destructive, accessible three-dimensional (3D) spatial biology method utilizing superchaotropes and host-guest chemistry to achieve homogeneous, deep penetration of macromolecular probes up to centimeter scales, providing reliable semi-quantitative signals throughout the tissue volume. Diverse antigens, mRNAs, neurotransmitters, and post-translational modifications are well-preserved and simultaneously visualized. INSIHGT also allows multi-round, highly multiplexed 3D molecular probing and is compatible with downstream traditional histology and nucleic acid sequencing. With INSIHGT, we map undescribed podocyte-to-parietal epithelial cell microfilaments in mouse glomeruli and neurofilament-intensive inclusion bodies in the human cerebellum, and identify NPY-proximal cell types defined by spatial morpho-proteomics in mouse hypothalamus. We anticipate that INSIHGT can form the foundations for 3D spatial multi-omics technology development and holistic systems biology studies.

Challenges and recent advances in erythropoietin stability

Erythropoietin (EPO) is a pivotal hormone that regulates red blood cell production, predominantly synthesized by the kidneys and also produced by the liver. Since the introduction of recombinant human EPO (rh-EPO) in 1989 through recombinant DNA technology, the therapeutic landscape for anemia has been improved. rh-EPO's market expansion has been substantial, with its application extending across various conditions such as chronic kidney disease, cancer-related anemia, and other disorders. Despite its success, significant concerns remain regarding the stability of EPO, which is critical for preserving its biological activity and ensuring therapeutic efficacy under diverse environmental conditions. Instability issues, including degradation and loss of biological activity, challenge both drug development and treatment outcomes. Factors contributing to EPO instability include temperature fluctuations, light exposure, and interactions with other substances. To overcome these challenges, pharmaceutical research has focused on developing innovative strategies such as stabilizing agents, advanced formulation techniques, and optimized storage conditions. This review article explores the multifaceted aspects of EPO stability, examining the impact of instability on clinical efficacy and drug development. It also provides a comprehensive review of current stabilization strategies, including the use of excipients, lyophilization, and novel delivery systems.

Multidomain Protein-Urea Interactions: Differences in Binding Behavior Lead to Different Destabilization Tendencies for Monoclonal Antibodies

We study the influence of urea on the stability of monoclonal antibodies (mAbs) using molecular dynamics (MD) simulations in combination with differential scanning fluorimetry (DSF). We show that a denaturing cosolute such as urea binds strongly to the protein, which can lead to denaturation and enhanced aggregation behavior at high temperatures. The interaction between protein and urea crucially depends on the surface properties of the individual mAb domains and therefore affects the general binding to the protein differently. The study of these mechanisms for proteins with multiple domains, such as mAbs, encounters significant limitations in experimental analysis methods due to their complexity. Using computational and experimental methods, we are able to separate the protein-urea interaction by domain and show that Lennard-Jones interactions are mainly responsible for significant binding effects. Our results emphasize the potential of MD simulations in combination with Kirkwood-Buff theory to study the interactions between proteins with multiple domains and cosolutes as formulation excipients for drug discovery and development.

Differences in Protein Capture by SP3 and SP4 Demonstrate Mechanistic Insights of Proteomics Cleanup Techniques

The goal of proteomics experiments is to identify proteins to observe changes in cellular processes and diseases. One challenge in proteomics is the removal of contaminants following protein extraction, which can limit protein identifications. Single-pot, solid-phase-enhanced sample preparation (SP3) is a cleanup technique in which proteins are captured on carboxylate-modified particles through a proposed hydrophilic-interaction-liquid-chromatography (HILIC)-like mechanism. Recent results have suggested that proteins are captured in SP3 due to a protein-aggregation mechanism. Solvent precipitation, single-pot, solid-phase-enhanced sample preparation (SP4) is a newer cleanup technique that employs protein aggregation to capture proteins without modified particles. We hypothesize that differences in capture mechanisms of SP3 and SP4 affect which proteins are identified by each cleanup technique. Herein, we assess the proteins identified and enriched using SP3 versus SP4 for MCF7 subcellular fractions and correlate protein capture in each method to protein hydrophobicity. Our results indicate that SP3 captures more hydrophilic proteins through a combination of HILIC-like and protein-aggregation mechanisms, while SP4 captures more hydrophobic proteins through a protein-aggregation mechanism. Ultimately, we demonstrate that protein-capture mechanisms are distinct, and the selection of a cleanup technique that yields high proteome coverage is dependent on protein-sample hydrophobicity. Data has been deposited into MassIVE (MSV000094130) and ProteomeXchange (PXD049965).

Comprehensive Overview of Bottom-Up Proteomics Using Mass Spectrometry

Proteomics is the large scale study of protein structure and function from biological systems through protein identification and quantification. "Shotgun proteomics" or "bottom-up proteomics" is the prevailing strategy, in which proteins are hydrolyzed into peptides that are analyzed by mass spectrometry. Proteomics studies can be applied to diverse studies ranging from simple protein identification to studies of proteoforms, protein-protein interactions, protein structural alterations, absolute and relative protein quantification, post-translational modifications, and protein stability. To enable this range of different experiments, there are diverse strategies for proteome analysis. The nuances of how proteomic workflows differ may be challenging to understand for new practitioners. Here, we provide a comprehensive overview of different proteomics methods. We cover from biochemistry basics and protein extraction to biological interpretation and orthogonal validation. We expect this Review will serve as a handbook for researchers who are new to the field of bottom-up proteomics.

Collection and transportation of SARS-CoV-2 and influenza A virus diagnostic samples: Optimizing the usage of guanidine-based chaotropic salts for enhanced biosafety and viral genome preservation

Many virus lysis/transport buffers used in molecular diagnostics, including the detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA, contain guanidine-based chaotropic salts, primarily guanidine hydrochloride (GuHCl) or guanidine isothiocyanate (GITC). Although the virucidal effects of GuHCl and GITC alone against some enveloped viruses have been established, standardized data on their optimum virucidal concentrations against SARS-CoV-2 and effects on viral RNA stability are scarce. Thus, we aimed to determine the optimum virucidal concentrations of GuHCl and GITC against SARS-CoV-2 compared to influenza A virus (IAV), another enveloped respiratory virus. We also evaluated the effectiveness of viral RNA stabilization at the determined optimum virucidal concentrations under high-temperature conditions (35°C) using virus-specific real-time reverse transcription polymerase chain reaction. Both viruses were potently inactivated by 1.0 M GITC and 2.5 M GuHCl, but the GuHCl concentration for efficient SARS-CoV-2 inactivation was slightly higher than that for IAV inactivation. GITC showed better viral RNA stability than GuHCl at the optimum virucidal concentrations. An increased concentration of GuHCl or GITC increased viral RNA degradation at 35°C. Our findings highlight the need to standardize GuHCl and GITC concentrations in virus lysis/transport buffers and the potential application of these guanidine-based salts alone as virus inactivation solutions in SARS-CoV-2 and IAV molecular diagnostics.

Stability-based approaches in chemoproteomics

Target deconvolution can help understand how compounds exert therapeutic effects and can accelerate drug discovery by helping optimise safety and efficacy, revealing mechanisms of action, anticipate off-target effects and identifying opportunities for therapeutic expansion. Chemoproteomics, a combination of chemical biology with mass spectrometry has transformed target deconvolution. This review discusses modification-free chemoproteomic approaches that leverage the change in protein thermodynamics induced by small molecule ligand binding. Unlike modification-based methods relying on enriching specific protein targets, these approaches offer proteome-wide evaluations, driven by advancements in mass spectrometry sensitivity, increasing proteome coverage and quantitation methods. Advances in methods based on denaturation/precipitation by thermal or chemical denaturation, or by protease degradation are evaluated, emphasising the evolving landscape of chemoproteomics and its potential impact on future drug-development strategies.

Easy assessment of the avidity of polyclonal allergen-specific serum antibodies

INTRODUCTION

Allergen-specific IgE-blocking IgG antibodies contribute to successful allergen immunotherapy (AIT), however, not much is known about their affinity. Since affinity measurements of polyclonal antibodies in serum are technically challenging we evaluated the applicability of acidic disruption of antibody-allergen complexes by a modified ELISA protocol with monoclonal antibodies (mAbs) specific for the relevant major allergens Betv1 and Mald1. Then, AIT-induced blocking and non-blocking Mald1-specific antibodies in sera from individuals with or without reduced apple allergy were compared.

METHODS

After testing their pH stability coated recombinant allergens were incubated with (i) mAbs diluted in PBS or human serum and (ii) sera from individuals after sublingual administration of Mald1 or Betv1 for 16 weeks. Immune complexes were exposed to buffers in the pH range of 6.4-3.4 and residual antibodies were measured. Avidity indexes (AI), defined as the pH removing 50% of antibodies, were compared to the dissociation constants (KD) of mAbs determined by surface plasmon resonance.

RESULTS

The selected pH range was applicable to disrupt allergen complexes with highly affine mAbs without compromising allergen integrity. AIs of mAbs accorded with KD values and were unaffected by epitope specificity or the presence of serum proteins. The inter-assay variability was <4% CV. Protective Mald1-specific IgG antibodies from individuals with reduced apple allergy showed a higher collective binding strength than that of the non-protective antibodies of individuals without reduced apple allergy.

CONCLUSION

Acidic disruption of allergen-antibody complexes may be used to estimate the net-binding force of polyclonal serum antibodies and eases the investigation of affinity-related research questions in AIT.

Differences in Protein Capture by SP3 and SP4 Demonstrate Mechanistic Insights of Proteomics Clean-up Techniques

The goal of proteomics experiments is to identify proteins to observe changes in cellular processes and diseases. One challenge in proteomics is the removal of contaminants following protein extraction, which can limit protein identification. Single-pot, solid-phase-enhanced sample preparation (SP3) is a clean-up technique in which proteins are captured on carboxylate-modified particles through a proposed hydrophilic-interaction-liquid-chromatography (HILIC)-like mechanism. However, recent results have suggested that proteins are captured in SP3 due to a protein-aggregation mechanism. Thus, solvent precipitation, single-pot, solid-phase-enhanced sample preparation (SP4) is a newer clean-up technique that employs protein-aggregation to capture proteins without modified particles. SP4 has previously enriched low-solubility proteins, though differences in protein capture could affect which proteins are detected and identified. We hypothesize that the mechanisms of capture for SP3 and SP4 are distinct. Herein, we assess the proteins identified and enriched using SP3 versus SP4 for MCF7 subcellular fractions and correlate protein capture in each method to protein hydrophobicity. Our results indicate that SP3 captures more hydrophilic proteins through a combination of HILIC-like and protein-aggregation mechanisms, while SP4 captures more hydrophobic proteins through a protein-aggregation mechanism. From these results, we recommend clean-up techniques based on protein-sample hydrophobicity to yield high proteome coverage in biological samples.

A Comparison of Bottom-Up Proteomic Sample Preparation Methods for the Human Parasite Trichomonas vaginalis

Bottom-up proteomic approaches depend on the efficient digestion of proteins into peptides for mass spectrometric analysis. Sample preparation strategies, based on magnetic beads, filter-aided systems, or in-solution digests, are commonly used for proteomic analysis. Time-intensive methods like filter-aided sample preparation (FASP) have led to the development of new, more time-efficient filter-based strategies like suspension trappings (S-Traps) or magnetic bead-based strategies like SP3. S-Traps have been reported as an alternative proteomic sample preparation method as they allow for high sodium dodecyl sulfate (SDS) concentrations to be present in the sample. In this study, we compare the efficiency of different protocols for FASP, SP3, and S-Trap-based digestion of proteins after extraction from Trichomonas vaginalis. Overall, we found a high number of protein IDs for all tested methods and a high degree of reproducibility within each method type. However, FASP with a 3 kDa cutoff filter unit outperformed the other methods analyzed, referring to the number of protein IDs. This is the first work providing the direct comparison of four different bottom-up proteomic approaches regarding the most efficient proteomic sample preparation protocol for the human parasite T. vaginalis.

Peptide ligands targeting the vesicular stomatitis virus G (VSV-G) protein for the affinity purification of lentivirus particles

The recent uptick in the approval of ex vivo cell therapies highlights the relevance of lentivirus (LV) as an enabling viral vector of modern medicine. As labile biologics, however, LVs pose critical challenges to industrial biomanufacturing. In particular, LV purification-currently reliant on filtration and anion-exchange or size-exclusion chromatography-suffers from long process times and low yield of transducing particles, which translate into high waiting time and cost to patients. Seeking to improve LV downstream processing, this study introduces peptides targeting the enveloped protein Vesicular stomatitis virus G (VSV-G) to serve as affinity ligands for the chromatographic purification of LV particles. An ensemble of candidate ligands was initially discovered by implementing a dual-fluorescence screening technology and a targeted in silico approach designed to identify sequences with high selectivity and tunable affinity. The selected peptides were conjugated on Poros resin and their LV binding-and-release performance was optimized by adjusting the flow rate, composition, and pH of the chromatographic buffers. Ligands GKEAAFAA and SRAFVGDADRD were selected for their high product yield (50%-60% of viral genomes; 40%-50% of HT1080 cell-transducing particles) upon elution in PIPES buffer with 0.65 M NaCl at pH 7.4. The peptide-based adsorbents also presented remarkable values of binding capacity (up to 3·109 TU per mL of resin, or 5·1011 vp per mL of resin, at the residence time of 1 min) and clearance of host cell proteins (up to a 220-fold reduction of HEK293 HCPs). Additionally, GKEAAFAA demonstrated high resistance to caustic cleaning-in-place (0.5 M NaOH, 30 min) with no observable loss in product yield and quality.

Unravelling DNA Organization with Single-Molecule Force Spectroscopy Using Magnetic Tweezers

Genomes carry the genetic blueprint of all living organisms. Their organization requires strong condensation as well as carefully regulated accessibility to specific genes for proper functioning of their hosts. The study of the structure and dynamics of the proteins that organize the genome has benefited tremendously from the development of single-molecule force spectroscopy techniques that allow for real-time, nanometer accuracy measurements of the compaction of DNA and manipulation with pico-Newton scale forces. Magnetic tweezers, in particular, have the unique ability to complement such force spectroscopy with the control over the linking number of the DNA molecule, which plays an important role when DNA-organizing proteins form or release wraps, loops, and bends in DNA. Here, we describe all the necessary steps to prepare DNA substrates for magnetic tweezers experiments, assemble flow cells, tether DNA to a magnetic bead inside a flow cell, and manipulate and record the extension of such DNA tethers. Furthermore, we explain how mechanical parameters of nucleoprotein filaments can be extracted from the data.

All-Inorganic Polyoxometalates Act as Superchaotropic Membrane Carriers

Polyoxometalates (POMs) are known antitumoral, antibacterial, antiviral, and anticancer agents and considered as next-generation metallodrugs. Herein, a new biological functionality in neutral physiological media, where selected mixed-metal POMs are sufficiently stable and able to affect membrane transport of impermeable, hydrophilic, and cationic peptides (heptaarginine, heptalysine, protamine, and polyarginine) is reported. The uptake is observed in both, model membranes as well as cells, and attributed to the superchaotropic properties of the polyoxoanions. In view of the structural diversity of POMs these findings pave the way toward their biomedical application in drug delivery or for cell-biological uptake studies with biological effector molecules or staining agents.

Self-assembled condensed tannins supramolecular system can adsorb cholesterol micelles to promote cholesterol excretion

In this study, the cholesterol (CH)-lowering behavioral mechanisms and drivers of condensed tannins (CTs) were revealed using a molecular aggregation theoretical model combined with in vitro experiments, as well as the CH-lowering effects of CTs validated based on animal experiments. Theoretical model results indicated that CTs can spontaneously aggregate to form supramolecular systems, can break CH micelles and form larger aggregates, a behavior driven by van der Waals forces and hydrogen bonds; DLS and TEM results confirmed that the presence of CH leads to a larger particle size of CTs and the formation of large aggregates; thermodynamic analysis and ITC revealed that the adsorption of CH by CTs is a spontaneous reaction driven by hydrogen bonds and hydrophobic forces; Animal experiments and fecal biochemical parameters further confirmed that the intake of CTs can reduce CH absorption and promotes CH excretion. Overall, this study reveals the CH-lowering behavioral mechanism of CTs from the perspective of molecular aggregation behavior.

Nanomolar Protein Thermal Profiling with Modified Cyanine Dyes

Protein properties and interactions have been widely investigated by using external labels. However, the micromolar sensitivity of the current dyes limits their applicability due to the high material consumption and assay cost. In response to this challenge, we synthesized a series of cyanine5 (Cy5) dye-based quencher molecules to develop an external dye technique to probe proteins at the nanomolar protein level in a high-throughput one-step assay format. Several families of Cy5 dye-based quenchers with ring and/or side-chain modifications were designed and synthesized by introducing organic small molecules or peptides. Our results showed that steric hindrance and electrostatic interactions are more important than hydrophobicity in the interaction between the luminescent negatively charged europium-chelate-labeled peptide (Eu-probe) and the quencher molecules. The presence of substituents on the quencher indolenine rings reduces their quenching property, whereas the increased positive charge on the indolenine side chain improved the interaction between the quenchers and the luminescent compound. The designed quencher structures entirely altered the dynamics of the Eu-probe (protein-probe) for studying protein stability and interactions, as we were able to reduce the quencher concentration 100-fold. Moreover, the new quencher molecules allowed us to conduct the experiments using neutral buffer conditions, known as the peptide-probe assay. These improvements enabled us to apply the method in a one-step format for nanomolar protein-ligand interaction and protein profiling studies instead of the previously developed two-step protocol. These improvements provide a faster and simpler method with lower material consumption.

Chemical Trends in Sample Preparation for Nucleic Acid Amplification Testing (NAAT): A Review

Nucleic acid amplification testing facilitates the detection of disease through specific genomic sequences and is attractive for point-of-need testing (PONT); in particular, the early detection of microorganisms can alert early response systems to protect the public and ecosystems from widespread outbreaks of biological threats, including infectious diseases. Prior to nucleic acid amplification and detection, extensive sample preparation techniques are required to free nucleic acids and extract them from the sample matrix. Sample preparation is critical to maximize the sensitivity and reliability of testing. As the enzymatic amplification reactions can be sensitive to inhibitors from the sample, as well as from chemicals used for lysis and extraction, avoiding inhibition is a significant challenge, particularly when minimising liquid handling steps is also desirable for the translation of the assay to a portable format for PONT. The reagents used in sample preparation for nucleic acid testing, covering lysis and NA extraction (binding, washing, and elution), are reviewed with a focus on their suitability for use in PONT.

IgY Antibodies from Birds: A Review on Affinity and Avidity

IgY antibodies are found in the blood and yolk of eggs. Several studies show the feasibility of utilising IgY for immunotherapy and immunodiagnosis. These antibodies have been studied because they fulfil the current needs for reducing, replacing, and improving the use of animals. Affinity and avidity represent the strength of the antigen-antibody interaction and directly influence antibody action. The aim of this review was to examine the factors that influence the affinity and avidity of IgY antibodies and the methodologies used to determine these variables. In birds, there are few studies on the maturation of antibody affinity and avidity, and these studies suggest that the use of an adjuvant-type of antigen, the animal lineage, the number of immunisations, and the time interfered with the affinity and avidity of IgY antibodies. Regarding the methodologies, most studies use chaotropic agents to determine the avidity index. Studies involving the solution phase and equilibrium titration reactions are also described. These results demonstrate the need for the standardisation of methodologies for the determination of affinity and avidity so that further studies can be performed to optimise the production of high avidity IgY antibodies.

Functional Nanomaterials for the Diagnosis of Alzheimer's Disease: Recent Progress and Future Perspectives

Alzheimer's disease (AD) is one of the main causes of dementia worldwide, whereby neuronal death or malfunction leads to cognitive impairment in the elderly population. AD is highly prevalent, with increased projections over the next few decades. Yet current diagnostic methods for AD occur only after the presentation of clinical symptoms. Evidence in the literature points to potential mechanisms of AD induction beginning before clinical symptoms start to present, such as the formation of amyloid beta (Aβ) extracellular plaques and neurofibrillary tangles (NFTs). Biomarkers of AD, including Aβ 40, Aβ 42, and tau protein, amongst others, show promise for early AD diagnosis. Additional progress is made in the application of biosensing modalities to measure and detect significant changes in these AD biomarkers within patient samples, such as cerebral spinal fluid (CSF) and blood, serum, or plasma. Herein, a comprehensive review of the emerging nano-biomaterial approaches to develop biosensors for AD biomarkers' detection is provided. Advances, challenges, and potential of electrochemical, optical, and colorimetric biosensors, focusing on nanoparticle-based (metallic, magnetic, quantum dots) and nanostructure-based biomaterials are discussed. Finally, the criteria for incorporating these emerging nano-biomaterials in clinical settings are presented and assessed, as they hold great potential for enhancing early-onset AD diagnostics.

Virus Inactivation by Formaldehyde and Common Lysis Buffers

Numerous mammalian viruses are routinely analyzed in clinical diagnostic laboratories around the globe or serve as indispensable model systems in viral research. Potentially infectious viral entities are handled as blood, biopsies, or cell and tissue culture samples. Countless protocols describe methods for virus fixation and inactivation, yet for many, a formal proof of safety and completeness of inactivation remains to be shown. While modern nucleic acid extraction methods work quite effectively, data are largely lacking on possible residual viral infectivity, e.g., when assessed after extended culture times, which maximizes the sensitivity for low levels of residual infectiousness. Therefore, we examined the potency and completeness of inactivation procedures on virus-containing specimens when applying commonly used fixatives like formaldehyde or nucleic acid extraction/lysis buffers. Typical representatives of different virus classes, including RNA and DNA viruses, enveloped and non-enveloped, such as adenovirus, enterovirus, lentivirus, and coronavirus, were used, and the reduction in the in vitro infectiousness was assessed for standard protocols. Overall, a 30-minute incubation with formaldehyde at room temperature effectively inactivated all tested enveloped and non-enveloped viruses. Full inactivation of HIV-1 and ECHO-11 was also achieved with all buffers in the test, whereas for SARS-CoV-2 and AdV-5, only five of the seven lysis buffers were fully effective under the tested conditions.

Chemical Changes Over Time Associated with Protein Drying

Upon drying, physical changes of the characteristics of proteins are observed by coagulation, but the nature and chronology of these changes have not been well studied. Coagulation changes the structure of protein from liquid to a solid or a thicker liquid by heat, mechanical action, or acids. Changes may have implications regarding the cleanability of reusable medical devices; therefore, an understanding of the chemical phenomena associated with drying of proteins is essential to ensuring adequate cleaning and mitigation of retained surgical soils. Using a high-performance gel permeation chromatography analysis with right-angle light-scattering detector at 90°, it was demonstrated that as soils dry, the molecular weight distribution changes. From the experimental evidence, the molecular weight distribution trends over time with drying to higher values. This is interpreted as a combination of oligomerization, degradation, and entanglement. As water is removed through evaporation, the distance between proteins decreases and their interactions increase. Albumin will polymerize into higher-molecular-weight oligomers, decreasing its solubility. Mucin, commonly found in the gastrointestinal tract to prevent infection, will degrade in the presence of enzymes releasing low-molecular-weight polysaccharides and leaving behind a peptide chain. The research described in this article investigated this chemical change.

Immobilized biocatalyst engineering: Biocatalytic tool to obtain attractive enzymes for industry

Biocatalysis can improve current bioprocesses by identifying or improving enzymes that withstand harsh and unnatural operating conditions. Immobilized Biocatalyst Engineering (IBE) is a novel strategy integrating protein engineering and enzyme immobilization as a single workflow. Using IBE, it is possible to obtain immobilized biocatalysts whose soluble performance would not be selected. In this work, Bacillus subtilis lipase A (BSLA) variants obtained through IBE were characterized as soluble and immobilized biocatalysts, and how the interactions with the support affect their structure and catalytic performance were analyzed using intrinsic protein fluorescence. Variant P5G3 (Asn89Asp, Gln121Arg) showed a 2.6-fold increased residual activity after incubation at 76 °C compared to immobilized wild-type (wt) BSLA. On the other hand, variant P6C2 (Val149Ile) showed 4.4 times higher activity after incubation in 75 % isopropyl alcohol (36 °C) compared to Wt_BSLA. Furthermore, we studied the advancement of the IBE platform by performing synthesis and immobilizing the BSLA variants using a cell-free protein synthesis (CFPS) approach. The observed differences in immobilization performance, high temperature, and solvent resistance between the in vivo-produced variants and Wt_BSLA were confirmed for the in vitro synthesized enzymes. These results open the door for designing strategies integrating IBE and CFPS to generate and screen improved immobilized enzymes from genetic diversity libraries. Furthermore, it was confirmed that IBE is a platform that can be used to obtain improved biocatalysts, especially those with an unremarkable performance as soluble biocatalysts, which wouldn't be selected for immobilization and further development for specific applications.

Specific ion effects on the aggregation of polysaccharide-based polyelectrolyte complex particles induced by monovalent ions within Hofmeister series

Polysaccharide-based polyelectrolyte complex (PEC) particles have been utilized as carriers for drug delivery systems (DDS) and as building components for material development. Despite their versatility, the aggregation mechanism of PEC particles in the presence of salts remains unclear. To clarify the aggregation mechanism, the specific ion effects of monovalent salts within the Hofmeister series on the aggregation behavior of PEC particles composed of chitosan and chondroitin sulfate C, which are often used as DDS carriers and materials, were studied. Here, we found that weakly hydrated chaotropic anions promoted the aggregation of positively charged PEC particles. The hydrophobicity of the PEC particles was increased by these ions. Strongly hydrated ions such as Cl^- are less likely to accumulate in these particles, whereas weakly hydrated chaotropic ions such as SCN^- are more likely to accumulate. Molecular dynamics simulations suggested that the hydrophobicity of PECs might be strengthened by ions due to changes in intrinsic and extrinsic ion pairs and hydrophobic interactions. Based on our results, it is expected that the control of surface hydrophilicity or hydrophobicity is an effective approach for controlling the stability of PEC particles in the presence of ions.

Evaluation of new L-amino acids triethanolammonium salts usability for controlling protease activity

Twenty new triethanolammonium amino acid salts (TEA AA) have been prepared from triethanolammonium hydroxide and L-amino acids. The physicochemical properties of TEA AA depended on the applied amino acid. Five of the synthesised salts, i.e. mono- and bis-salts of L-glutamic acid, L-aspartic acid, and TEA salt of l-glutamine were solids with melting points between 127.32 °C to 171.51 °C. The other TEA AA exhibited glass transition temperatures from -68.45 °C for TEA Ser to -6.27 °C for TEA Trp and were assigned as amino acid ionic liquids (AAILs). The TEA His was characterised by the highest thermal stability, with an average temperature of 5 % weight loss at 186.4 °C, whereas the lowest stability was determined for TEA Asp (107.5 °C). The developed salts were tested as reaction medium additives for proteolytic enzymes (papain, subtilisin, bromelain). Most AAILs showed an inhibitory effect on tested proteases but with different mechanisms related to the enzyme substrate specificity and structural diversity. The TEA Ser was the most effective competitive inhibitor (K_i = 0.24 10^-4 mol/L) for bromelain, while TEA Val uncompetitive inhibitor for papain (K_i = 0.25 10^-4 mol/L). The developed TEA AA salts exhibit potential as enzyme-controlling agents for use in industrial processes.

A Proteomic Analysis for the Red Seaweed Asparagopsis taxiformis

The red seaweed Asparagopsis taxiformis is a promising ruminant feed additive with anti-methanogenic properties that could contribute to global climate change solutions. Genomics has provided a strong foundation for in-depth molecular investigations, including proteomics. Here, we investigated the proteome of A. taxiformis (Lineage 6) in both sporophyte and gametophyte stages, using soluble and insoluble extraction methods. We identified 741 unique non-redundant proteins using a genome-derived database and 2007 using a transcriptome-derived database, which included numerous proteins predicted to be of fungal origin. We further investigated the genome-derived proteins to focus on seaweed-specific proteins. Ontology analysis indicated a relatively large proportion of ion-binding proteins (i.e., iron, zinc, manganese, potassium and copper), which may play a role in seaweed heavy metal tolerance. In addition, we identified 58 stress-related proteins (e.g., heat shock and vanadium-dependent haloperoxidases) and 44 photosynthesis-related proteins (e.g., phycobilisomes, photosystem I, photosystem II and ATPase), which were in general more abundantly identified from female gametophytes. Forty proteins were predicted to be secreted, including ten rhodophyte collagen-alpha-like proteins (RCAPs), which displayed overall high gene expression levels. These findings provide a comprehensive overview of expressed proteins in A. taxiformis, highlighting the potential for targeted protein extraction and functional characterisation for future biodiscovery.

Synergistic Chaotropic Effect and Cathode Interface Thermal Release Effect Enabling Ultralow Temperature Aqueous Zinc Battery

Although rechargeable zinc-ion batteries are promising candidates for next-generation energy storage devices, their inferior performance at subzero temperatures limits their practical application. Here, a strategy to destroy the H-bond network by adding synergistic chaotropic regents is reported, thus reducing the freezing point of the aqueous electrolyte below -90 °C. Owing to the synergistic chaotropic effect between urea and Zn(ClO₄ )₂ and the thermal release effect on the cathode interface during charging, Zn//VO₂ batteries feature a specific capacity of 111.4 mAh g^-1 and stability after ≈1000 cycles with 81.9% capacity retention at -40 °C. This work demonstrates that the synergistic chaotropic effect and the thermal effect on the interface can effectively widen the operation range of temperature of aqueous electrolytes and maintain fast kinetics, which provides a new design strategy for all-weather aqueous zinc batteries.

Role of detergents and nuclease inhibitors in the extraction of RNA from eukaryotic cells in complex matrices

The potential for liquid biopsy samples to be used in place of more invasive tissue biopsies has become increasingly revalent as it has been found that nucleic acids (NAs) present in the blood of cancer patients originate from tumors. Nanomagnetic extraction has proven to be a highly effective means to rapidly prepare NA from clinical samples for molecular diagnostics. In this article, the lysis reaction used to extract RNA from the human epithelial melanoma cells have been optimized using silica coated superparamagnetic nanoparticles (SPM NP). The lysis buffer (LB) is composed of several agents that denature cells, i.e., surfactant and guanidinium isothiocyanate (GITC), and agents that inhibit the degradation of circulated nucleic acids (cfNAs). The surfactant Triton X-100 has been widely used in LB but has been placed on the European Union REACH list. We have compared the qRT-PCR sensitivity resulting from LBs composed of Triton X-100 to several sustainable surfactants, i.e., Tergitol 15-S-7, Tergitol 15-S-9 and Tween-20. Surprisingly, the inclusion of these surfactants in the LB was not found to significantly improve cell lysis, and subsequently the sensitivity of qRT-PCR. The role of the sample matrix was also examined by performing extractions from solutions containing up to 30 mg mL^-1 serum albumin. The qRT-PCR sensitivity was found to decrease as the concentration of this protein was increased; however, this was linked to an increased RNase activity and not the concentration of the protein itself. These results lead us to recommend a reformulation of LB for clinical samples, and to conclude that sensitive qRT-PCR RNA analysis can be performed in serum with the timely addition of an RNase inhibitor.

Decellularized blood vessel development: Current state-of-the-art and future directions

Vascular diseases contribute to intensive and irreversible damage, and current treatments include medications, rehabilitation, and surgical interventions. Often, these diseases require some form of vascular replacement therapy (VRT) to help patients overcome life-threatening conditions and traumatic injuries annually. Current VRTs rely on harvesting blood vessels from various regions of the body like the arms, legs, chest, and abdomen. However, these procedures also produce further complications like donor site morbidity. Such common comorbidities may lead to substantial pain, infections, decreased function, and additional reconstructive or cosmetic surgeries. Vascular tissue engineering technology promises to reduce or eliminate these issues, and the existing state-of-the-art approach is based on synthetic or natural polymer tubes aiming to mimic various types of blood vessel. Burgeoning decellularization techniques are considered as the most viable tissue engineering strategy to fill these gaps. This review discusses various approaches and the mechanisms behind decellularization techniques and outlines a simplified model for a replacement vascular unit. The current state-of-the-art method used to create decellularized vessel segments is identified. Also, perspectives on future directions to engineer small- (inner diameter >1 mm and <6 mm) to large-caliber (inner diameter >6 mm) vessel substitutes are presented.

Water-Soluble Chalcogenide W6-Clusters: On the Way to Biomedical Applications

Despite the great potential of octahedral tungsten cluster complexes in fields of biomedical applications such as X-ray computed tomography or angiography, there is only one example of a water-soluble W₆Q₈-cluster that has been reported in the literature. Herein we present the synthesis and a detailed characterization including X-ray structural analysis, NMR, IR, UV-Vis spectroscopies, HR-MS spectrometry, and the electrochemical behavior of two new cluster complexes of the general formula W₆Q₈L₆ with phosphine ligands containing a hydrophilic carboxylic group, which makes the complexes soluble in an aqueous medium. The hydrolytic stability of the clusters' aqueous solutions allows us to investigate for the first time the influence of W₆-clusters on cell viability. The results obtained clearly demonstrate their very low cytotoxicity, comparable to the least-toxic clusters presented in the literature.

Perchlorate-Specific Proteomic Stress Responses of Debaryomyces hansenii Could Enable Microbial Survival in Martian Brines

If life exists on Mars, it would face several challenges including the presence of perchlorates, which destabilize biomacromolecules by inducing chaotropic stress. However, little is known about perchlorate toxicity for microorganism on the cellular level. Here we present the first proteomic investigation on the perchlorate-specific stress responses of the halotolerant yeast Debaryomyces hansenii and compare these to generally known salt stress adaptations. We found that the responses to NaCl and NaClO₄ -induced stresses share many common metabolic features, e.g., signaling pathways, elevated energy metabolism, or osmolyte biosynthesis. Nevertheless, several new perchlorate-specific stress responses could be identified, such as protein glycosylation and cell wall remodulations, presumably in order to stabilize protein structures and the cell envelope. These stress responses would also be relevant for life on Mars, which - given the environmental conditions - likely developed chaotropic defense strategies such as stabilized confirmations of biomacromolecules and the formation of cell clusters. This article is protected by copyright. All rights reserved.

Enzyme Purification Improves the Enzyme Loading, Self-Propulsion, and Endurance Performance of Micromotors

Enzyme-powered micro- and nanomotors make use of biocatalysis to self-propel in aqueous media and hold immense promise for active and targeted drug delivery. Most (if not all) of these micro- and nanomotors described to date are fabricated using a commercially available enzyme, despite claims that some commercial preparations may not have a sufficiently high degree of purity for downstream applications. In this study, the purity of a commercial urease, an enzyme frequently used to power the motion of micro- and nanomotors, was evaluated and found to be impure. After separating the hexameric urease from the protein impurities by size-exclusion chromatography, the hexameric urease was subsequently characterized and used to functionalize hollow silica microcapsules. Micromotors loaded with purified urease were found to be 2.5 times more motile than the same micromotors loaded with unpurified urease, reaching average speeds of 5.5 μm/s. After comparing a number of parameters, such as enzyme distribution, protein loading, and motor reusability, between micromotors functionalized with purified vs unpurified urease, it was concluded that protein purification was essential for optimal performance of the enzyme-powered micromotor.

Improved Refolding of a Human IgG1 Fc (CH2-CH3) Scaffold from Its Inclusion Body in E. coli by Alkaline Solubilization

Recently, we developed a platform strategy for hinge-deficient human immunoglobulin G1 (IgG1) Fc fusion as a non-immunostimulatory Fc fusion system. As a starting point to establish a promising approach for generating hinge-deficient Fc fusion proteins in Escherichia (E.) coli, we selected a CH2-CH3 scaffold as a model protein for evaluation. Recombinant CH2-CH3, expressed as inclusion bodies, was solubilized with various denaturants (urea, sarkosyl, sodium dodecyl sulfate (SDS), 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate (CHAPS), or Triton X-100) in neutral (phosphate-buffered saline (PBS), pH 8) or alkaline (50 or 500 mM N-cyclohexyl-3-aminopropanesulfonic acid (CAPS), pH 11) buffer at 25 °C. Similar to the authentic CH2-CH3 produced in Chinese hamster ovary (CHO) cells, all denaturants, except urea in CAPS buffer but not in PBS, were found to elicit the dimer formation of solubilized CH2-CH3 on SDS-polyacrylamide gel electrophoresis (PAGE). After dialysis with PBS, sarkosyl-soluble CH2-CH3 inclusion bodies were successfully purified using protein G-Sepharose, indicating their successful refolding. Compared to the purified CH2-CH3 from its sarkosyl-soluble inclusion bodies in neutral buffer, that in 500 mM CAPS alkaline buffer revealed substantial structure-related similarities, such as secondary structures and thermal stabilities, as measured by circular dichroism spectroscopy, to authentic CH2-CH3. Native PAGE analysis also supported the above data. Therefore, solubilization at alkaline pH is an essential factor that promotes the refolding of CH2-CH3. Dimer formation of CH2-CH3 on SDS-PAGE may act as a surrogate marker for its protein refolding status. Our observations may provide important hints toward downstream processing of Fc-fusion production in E. coli.

Acid Hydrotropic Fractionation of Lignocelluloses for Sustainable Biorefinery: Advantages, Opportunities, and Research Needs

This Minireview provides a comprehensive discussion on the potential of using acid hydrotropes for sustainably fractionating lignocelluloses for biorefinery applications. Acid hydrotropes are a class of acids that have hydrotrope properties toward lignin, which helps to solubilize lignin in aqueous systems. With the capability of cleaving ether and ester bonds and even lignin-carbohydrate complex (LCC) linkages, these acid hydrotropes can therefore isolate lignin embedded in the plant biomass cell wall and subsequently solubilize the isolated lignin in aqueous systems. Performances of two acid hydrotropes, that is, an aromatic sulfonic acid [p-toluenesulfonic acid (p-TsOH)] and a dicarboxylic acid [maleic acid (MA)], in terms of delignification and dissolution of hemicelluloses, and reducing lignin condensation, were evaluated and compared. The advantages of lignin esterification by MA for producing cellulosic sugars through enzymatic hydrolysis and lignin-containing cellulose nanofibrils (LCNFs) through mechanical fibrillation from the fractionated water insoluble solids (WIS), and for obtaining less condensed lignin with light color, were demonstrated. The excellent enzymatic digestibility of maleic acid hydrotropic fractionation WISs was also demonstrated by comparing with WISs from other fractionation processes. The recyclability and reusability of acid hydrotropes were also reviewed. Finally, perspectives on future research needs to address key technical issues for commercialization were also provided.

Preparing (Metalla)carboranes for Nanomedicine

"There's plenty of room at the bottom" (Richard Feynman, 1959): an invitation for (metalla)carboranes to enter the (new) field of nanomedicine. For two decades, the number of publications on boron cluster compounds designed for potential applications in medicine has been constantly increasing. Hundreds of compounds have been screened in vitro or in vivo for a variety of biological activities (chemotherapeutics, radiotherapeutics, antiviral, etc.), and some have shown rather promising potential for further development. However, until now, no boron cluster compounds have made it to the clinic, and even clinical trials have been very sparse. This review introduces a new perspective in the field of medicinal boron chemistry, namely that boron-based drugs should be regarded as nanomedicine platforms, due to their peculiar self-assembly behaviour in aqueous solutions, and treated as such. Examples for boron-based 12- and 11-vertex clusters and appropriate comparative studies from medicinal (in)organic chemistry and nanomedicine, highlighting similarities, differences and gaps in physicochemical and biological characterisation methods, are provided to encourage medicinal boron chemists to fill in the gaps between chemistry laboratory and real applications in living systems by employing bioanalytical and biophysical methods for characterising and controlling the aggregation behaviour of the clusters in solution.

Aptamers as the powerhouse of dot blot assays

Dot blot assays have always been associated with antibodies as the main molecular recognition element, which are widely employed in a myriad of diagnostic applications. With the rising of aptamers as the equivalent molecular recognition elements of antibodies, dot blot assays are also one of the diagnostic avenues that should be scrutinized for their amenability with aptamers as the potential surrogates of antibodies. In this review, the stepwise procedures of an aptamer-based dot blot assays are underscored before reviewing the existing aptamer-based dot blot assays developed so far. Most of the applications center on monitoring the progress of SELEX and as the validatory assays to assess the potency of aptamer candidates. For the purpose of diagnostics, the current effort is still languid and as such possible suggestions to galvanize the move to spur the aptamer-based dot blot assays to a point-of-care arena are discussed.

Pesticide interactions induce alterations in secondary structure of malate dehydrogenase to cause destability and cytotoxicity

Environmental exposure to pesticides increases the risk of neurotoxicity and neurodegenerative diseases. The mechanism of pesticide-induced toxicity is attributed to the increased reactive oxygen species, mitochondrial dysfunction, inhibition of key cellular enzymes and accelerated pathogenic protein aggregation. The structural basis of pesticide-protein interaction is limited to pathogenic proteins such as α-synuclein, Tau and amyloid-beta. However, the effect of pesticides on metabolic proteins is still unexplored. Here, we used rotenone and chlorpyrifos to understand the interaction of these pesticides with a metabolic protein, malate dehydrogenase (MDH) and the consequent pesticide-induced cytotoxicity. We found that rotenone and chlorpyrifos strongly bind to MDH, interferes with protein folding and triggers alteration in its secondary structure. Both pesticides showed high binding affinities for MDH as observed by NMR and LCMS. Rotenone and chlorpyrifos induced structural alterations during MDH refolding resulting in the formation of cytotoxic conformers that generated oxidative stress and reduced cell viability. Our findings suggest that pesticides, in general, interact with proteins resulting in the formation of cytotoxic conformers that may have implications in neurotoxicity and neurodegenerative diseases.

Exploring conformational preferences of proteins: ionic liquid effects on the energy landscape of avidin

In this work we experimentally investigate solvent and temperature induced conformational transitions of proteins and examine the role of ion–protein interactions in determining the conformational preferences of avidin, a homotetrameric glycoprotein, in choline-based ionic liquid (IL) solutions. Avidin was modified by surface cationisation and the addition of anionic surfactants, and the structural, thermal, and conformational stabilities of native and modified avidin were examined using dynamic light scattering, differential scanning calorimetry, and thermogravimetric analysis experiments. The protein-surfactant nanoconjugates showed higher thermostability behaviour compared to unmodified avidin, demonstrating distinct conformational ensembles. Small-angle X-ray scattering data showed that with increasing IL concentration, avidin became more compact, interpreted in the context of molecular confinement. To experimentally determine the detailed effects of IL on the energy landscape of avidin, differential scanning fluorimetry and variable temperature circular dichroism spectroscopy were performed. We show that different IL solutions can influence avidin conformation and thermal stability, and we provide insight into the effects of ILs on the folding pathways and thermodynamics of proteins. To further study the effects of ILs on avidin binding and correlate thermostability with conformational heterogeneity, we conducted a binding study. We found the ILs examined inhibited ligand binding in native avidin while enhancing binding in the modified protein, indicating ILs can influence the conformational stability of the distinct proteins differently. Significantly, this work presents a systematic strategy to explore protein conformational space and experimentally detect and characterise ‘invisible’ rare conformations using ILs.

Revealing solvent and temperature induced conformational transitions of proteins and the role of ion–protein interactions in determining the conformational preferences of avidin in ionic liquids.

Destressing Yeast for Higher Biofuel Yields: Can Excess Chaotropicity Be Mitigated?

Biofuels have the capacity to contribute to carbon dioxide emission reduction and to energy security as oil reserves diminish and/or become concentrated in politically unstable regions. However, challenges exist in obtaining the maximum yield from industrial fermentations. One challenge arises from the nature of alcohols. These compounds are chaotropic (i.e. causes disorder in the system) which causes stress in the microbes producing the biofuel. Brewer's yeast (Saccharomyces cerevisiae) typically cannot grow at ethanol concentration much above 17% (v/v). Mitigation of these properties has the potential to increase yield. Previously, we have explored the effects of chaotropes on model enzyme systems and attempted (largely unsuccessfully) to offset these effects by kosmotropes (compounds which increase the order of the system, i.e. the "opposite" of chaotropes). Here we present some theoretical results which suggest that high molecular mass polyethylene glycols may be the most effective kosmotropic additives in terms of both efficacy and cost. The assumptions and limitations of these calculations are also presented. A deeper understanding of the effects of chaotropes on biofuel-producing microbes is likely to inform improvements in bioethanol yields and enable more rational approaches to the "neutralisation" of chaotropicity.

Functional Stability and Structural Transitions of a Kunitz trypsin Inhibitor from Chickpea (CaTI2)

Enzymes are important tools for various applications. We have studied structural transitions and functional stability of a Kunitz trypsin inhibitor from Chickpea (CaTI2), a potent insect gut-protease inhibitor, under different stress conditions like non-neutral pH, elevated temperature and co-solvent concentrations. CaTI2 was cloned and expressed in an eukaryotic system P. pastoris and was investigated for conformational transitions using circular dichroism spectroscopy, differential scanning fluorimetry and activity assay. Native CaTI2 has a sheet dominant structure with 40% β sheets and possess a single tryptophan residue situated in the hydrophobic core of the enzyme. The recombinant inhibitor maintained its maximum activity under alkaline pH with its secondary structure intact between pH 6-10. CaTI2 was observed to be thermally stable up to 55 °C with a T_m of 61.3 °C above which the protein unfolds. On treating with chemical denaturant (urea), the CaTI2 lost its inhibitory potential and native conformation beyond 2 M urea concentration. Moreover, the protein unfolded at lower temperatures as the concentration of denaturant increased, suggesting more complex structural changes. Further, the stability of the inhibitor was found to be directly proportional to the solvent polarity. The data, herein offers significant information of inhibitor stability and activity which could be exploited for its further development into an effective pesticide.

Human Adipose-Derived Mesenchymal Stem Cells-Incorporated Silk Fibroin as a Potential Bio-Scaffold in Guiding Bone Regeneration

Recently, stem cell-based bone tissue engineering (BTE) has been recognized as a preferable and clinically significant strategy for bone repair. In this study, a pure 3D silk fibroin (SF) scaffold was fabricated as a BTE material using a lyophilization method. We aimed to investigate the efficacy of the SF scaffold with and without seeded human adipose-derived mesenchymal stem cells (hASCs) in facilitating bone regeneration. The effectiveness of the SF-hASCs scaffold was evaluated based on physical characterization, biocompatibility, osteogenic differentiation in vitro, and bone regeneration in critical rat calvarial defects in vivo. The SF scaffold demonstrated superior biocompatibility and significantly promoted osteogenic differentiation of hASCs in vitro. At six and twelve weeks postimplantation, micro-CT showed no statistical difference in new bone formation amongst all groups. However, histological staining results revealed that the SF-hASCs scaffold exhibited a better bone extracellular matrix deposition in the defect regions compared to other groups. Immunohistochemical staining confirmed this result; expression of osteoblast-related genes (BMP-2, COL1a1, and OCN) with the SF-hASCs scaffold treatment was remarkably positive, indicating their ability to achieve effective bone remodeling. Thus, these findings demonstrate that SF can serve as a potential carrier for stem cells, to be used as an osteoconductive bioscaffold for BTE applications.

Rapid and Efficient Isolation of Exosomes by Clustering and Scattering

Tumor-derived extracellular vesicles (EVs) have become important biomarkers of liquid biopsies for precision medicine. However, the clinical application of EVs has been limited due to the lack of EV isolation practical technology applicable to clinical environments. Here, we report an innovative EV isolation method, which is quick and simple, and facilitates high-yield and high-purity EV isolation from blood. Introducing a cationic polymer in plasma resulted in rapid clustering of anionic EVs and a chaotropic agent can separate EVs from these clusters. Isolated EVs were characterized in terms of size distribution, morphology, surface protein markers, and exosomal RNA. Through performance comparison with various methods, including ultracentrifugation (UC), the present method delivered the highest recovery rate (~20 folds that of UC) and purity ratio (3.5 folds that of UC) of EVs in a short period of time (<20 min). The proposed method is expected to be used in basic and applied research on EV isolation and in clinical applications.

Challenges and Opportunities in Identifying and Characterising Keratinases for Value-Added Peptide Production

Keratins are important structural proteins produced by mammals, birds and reptiles. Keratins usually act as a protective barrier or a mechanical support. Millions of tonnes of keratin wastes and low value co-products are generated every year in the poultry, meat processing, leather and wool industries. Keratinases are proteases able to breakdown keratin providing a unique opportunity of hydrolysing keratin materials like mammalian hair, wool and feathers under mild conditions. These mild conditions ameliorate the problem of unwanted amino acid modification that usually occurs with thermochemical alternatives. Keratinase hydrolysis addresses the waste problem by producing valuable peptide mixes. Identifying keratinases is an inherent problem associated with the search for new enzymes due to the challenge of predicting protease substrate specificity. Here, we present a comprehensive review of twenty sequenced peptidases with keratinolytic activity from the serine protease and metalloprotease families. The review compares their biochemical activities and highlights the difficulties associated with the interpretation of these data. Potential applications of keratinases and keratin hydrolysates generated with these enzymes are also discussed. The review concludes with a critical discussion of the need for standardized assays and increased number of sequenced keratinases, which would allow a meaningful comparison of the biochemical traits, phylogeny and keratinase sequences. This deeper understanding would facilitate the search of the vast peptidase family sequence space for novel keratinases with industrial potential.