Microbial Contamination of Drinking Water and Human Health from Community Water Systems

From sewage to genomes: Expanding our understanding of the urban and semi-urban wastewater RNA virome

Wastewater is a hotspot for viral diversity, harboring various microbial, plant, and animal viruses, including those that infect humans. However, the dynamics, resilience, and ecological roles of viral communities during treatment are largely unknown. In this study, we explored RNA virus ecogenomics using metagenomics from influent and effluent samples across three wastewater catchment areas in Chile, with a population of 7.05 million equivalent inhabitants. We identified 14,212 RNA-dependent RNA polymerase (RdRP)-coding sequences from the Orthornavirae kingdom, clustering into 4989 viral species. Using extensive databases of 14,150 family-level representative sequences, we classified 90 % of our sequences at the family level. Our analysis revealed that treatment reduced viral richness and evenness (Shannon index), but phylogenetic diversity remained unchanged. Effluents showed lower richness and evenness than influents with similar phylogenetic diversity. Species turnover, influenced by catchment area and treatment, accounted for 54 % of sample dissimilarities (Weighted Unifrac). Biomarker analysis indicated that families like Astroviridae and Fiersviridae were more abundant in influents, while Reoviridae and Virgaviridae dominated effluents. This suggests that viral resistance to treatment varies and cannot be solely attributed to genome type, size, or morphology. We traced viral genomes through time and space, identifying sequences like the Pepper Mild Mottle Virus (PMMoV) from the Virgaviridae family over large distances and periods, highlighting its wastewater marker potential. High concentrations of human pathogens, such as Rotavirus (Reoviridae) and Human Astrovirus (Astroviridae), were found in both influents and effluents, stressing the need for continuous monitoring, especially for treated wastewater reuse.

Odontites linkii subsp. cyprius Ethanolic Extract Indicated In Vitro Anti-Acanthamoeba Effect

This study aims to investigate three endemic ethanolic leaf extracts from Cyprus for anti-Acanthamoeba activities: Odontites linkii subsp. cyprius (Boiss.) Bolliger, Ptilostemon chamaepeuce subsp. cyprius (Greuter) Chrtek & B. Slavík, and Quercus alnifolia Poech. Screening for radical scavenging activity, total phenolic content (TPC), and total flavonoid content (TFC) were performed by the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABST) methods, Folin-Ciocalteu method, and aluminum chloride method, respectively. An antibacterial-susceptibility test (AST) was performed using a broth microdilution assay to estimate the minimum inhibitory concentration (MIC) using iodonitrotetrazolium chloride (INT). Trypan blue (0.5%) was used to assess in vitro anti-Acanthamoeba cell viability of the ethanolic leaf extracts after 24-, 48-, and 72-h exposure-screening of ethanolic leaf extracts with liquid chromatography-mass spectrometry (LC-MS) for known compounds with biological activity. The ethanolic leaf extract of Odontites linkii subsp. cyprius demonstrated the highest anti-Acanthamoeba activity, with an inhibitory concentration (IC50) of 7.02 mg/mL after 72 h. This extract also showed an in vitro minimum inhibitory concentration (MIC) of 0.625 mg/mL against Enterococcus faecalis, a common nosocomial pathogen. The LC-MS analysis revealed the presence of bioactive iridoid compounds in O. linkii subsp. cyprius, further highlighting its potential as a source for new drug compounds. The ethanolic extract of O. linkii subsp. cyprius demonstrated a dose-dependent and time-dependent anti-Acanthamoeba effect in vitro. This study is the first to report the presence of iridoid compounds and anti-Acanthamoeba activities in the ethanolic extract of O. linkii subsp. cyprius. These promising findings highlight the potential of plant extracts, particularly O. linkii subsp. cyprius, as a source for new drug compounds for Acanthamoeba infections.

Earthworm gut digestion drives the transfer behavior of antibiotic resistance genes in layers of extracellular polymeric substances during vermicomposting of dewatered sludge

Gut digestion by earthworms (GDE) is a crucial step in vermicomposting, affecting the fate of antibiotic resistance genes (ARGs) in vermicompost sludge. The extracellular polymeric substance (EPS) matrix of sludge is an important space for ARG transfer. However, the effect of GDE on EPS-associated ARGs remains unclear. Therefore, this study explored the role of GDE in driving the transfer of ARGs within different EPS layers in sludge. For this, the changes in intracellular ARGs and EPS-associated ARGs in sludge were analyzed after 5 days of the GDE process. The results showed that after the GDE process, both nitrate and dissolved organic carbon significantly increased in all EPS layers of sludge, while the proteins and polysaccharides only enhanced in soluble and loosely bound EPS of sludge. In addition, a 7.0% decrease in bacterial diversity was recorded after the GDE process, with a functional bacterial community structure emerging. Moreover, the absolute abundance of total ARGs and mobile genetic elements decreased by 90.71% and 61.83%, respectively, after the GDE process. Intracellular ARGs decreased by 92.1%, while EPS-associated ARGs increased by 4.9%, indicative of intracellular ARG translocation into the EPS during the GDE process. Notably, the ARGs exhibited significant enrichment in both the soluble and loosely bound EPS, whereas they were reduced in the tightly bound EPS. The structural equation modeling revealed that the GDE process effectively mitigated the ARG dissemination risk by modulating both the EPS structure and microenvironment, with the organic structure representing a primary factor influencing ARGs in the EPS.

Short Communication: Rotavirus Group A Occurrence in Rural Water Source Samples in a Midwest Region State of Brazil, Comparing Wet and Dry Seasons

Identified as a potential reference pathogen by the WHO Guidelines for Drinking-Water Quality, Rotavirus (RV) is among the main enteric viruses that cause waterborne diseases. The aim of this study was to identify and correlate the presence of RV in collective and individual water sources of rural communities in the state of Goiás, within the seasons in which the collections were made (rainy and dry seasons). For this, 86 water samples in the dry period and 160 samples in the rainy period were collected. Concentration of water samples, extraction of viral genetic material and molecular tests were performed. When analyzing the presence of RV in the samples, taking into consideration the period studied, RV was found to be more prevalent in the dry season (54.7%) than in the rainy season (20%), showing a strong statistical association with the dry season (p-value < 0.001). The presence of pathogenic microorganisms in water is a public risk issue, enabling the emergence of outbreaks, endemics and epidemics. In the present research, there was an association between the presence of Rotavirus and the dry period of the year when compared to the rainy period.

Immunomics in one health: understanding the human, animal, and environmental aspects of COVID-19

The coronavirus disease 2019 (COVID-19) pandemic underscores the critical need to integrate immunomics within the One Health framework to effectively address zoonotic diseases across humans, animals, and environments. Employing advanced high-throughput technologies, this interdisciplinary approach reveals the complex immunological interactions among these systems, enhancing our understanding of immune responses and yielding vital insights into the mechanisms that influence viral spread and host susceptibility. Significant advancements in immunomics have accelerated vaccine development, improved viral mutation tracking, and broadened our comprehension of immune pathways in zoonotic transmissions. This review highlights the role of animals, not merely as carriers or reservoirs, but as essential elements of ecological networks that profoundly influence viral epidemiology. Furthermore, we explore how environmental factors shape immune response patterns across species, influencing viral persistence and spillover risks. Moreover, case studies demonstrating the integration of immunogenomic data within the One Health framework for COVID-19 are discussed, outlining its implications for future research. However, linking humans, animals, and the environment through immunogenomics remains challenging, including the complex management of vast amounts of data and issues of scalability. Despite challenges, integrating immunomics data within the One Health framework significantly enhances our strategies and responses to zoonotic diseases and pandemic threats, marking a crucial direction for future public health breakthroughs.

Metagenomic evaluation of bacteria in drinking water using full-length 16S rRNA amplicons

Escherichia coli and total coliforms are important tools for identifying potential faecal contamination in drinking water. However, metagenomics offers a powerful approach for delving deeper into a bacterial community when E. coli or total coliforms are detected. Metagenomics can identify microbes native to water systems, track community changes and potential pathogens introduced by contamination events, and evaluate the effectiveness of treatment processes. Here, we demonstrate how the dual application of traditional monitoring practices and metagenomics can improve monitoring and surveillance for water resource management. The robustness of long-read metagenomics across replicates is demonstrated by the effect and interaction between manganese filters and bacterial communities, as well as the impact of chlorination after coliform detection. These examples reveal how metagenomics can identify the complex bacterial communities in the distribution system and the source waters used to supply drinking water treatment plants (DWTPs). The knowledge gained increases confidence in identified causes and mitigations of potential contamination events. By exploring bacterial communities, we can gain additional insights into the impact of faecal contamination events and treatment processes. This insight enables more precise remediation actions and enhances confidence in communicating health risks to drinking water operators and the public.

Metal nanostructures in polymeric matrices for optical detection and removal of heavy metal ions, pesticides and dyes from water

Water pollutants such as heavy metal ions, pesticides, and dyes pose a worldwide issue. Their presence in water resources interferes with the normal growth mechanisms of living beings and causes long or short-term diseases. For this reason, research continuously tends to develop innovative, selective, and efficient processes or technologies to detect and remove pollutants from water. This review provides an up-to-date overview on metal nanoparticles loaded in polymeric matrices, such as hydrogels and membranes, and employed as optical sensors and as removing materials for water pollutants. The synthetic pathways of nanomaterials loading into polymeric matrices have been analyzed, particularly focusing on noble metal nanoparticles, noble metal nanoclusters, and metal oxide nanoparticles. Moreover, the sensing properties of modified matrices towards water pollutants have been discussed in addition to the interaction mechanisms between the sensors and the toxic compounds. The last part of the review has been devoted to illustrating the separation mechanism and removal performance of membranes loaded with nanomaterials in the treatment and purification of water streams from different contaminants (heavy metals, dyes and pesticides).

Control approach and evaluation framework of scaling in drinking water distribution systems: A review

The United Nations Sustainable Development Goals call for innovative proposals to ensure access to clean water and sanitation. While significant strides have been made in enhancing drinking water purification technologies, the role of drinking water distribution systems (DWDS) in maintaining water quality safety has increasingly become a focal point of concern. The presence of scale within DWDS can impede the secure and efficient functioning of the drinking water supply system, posing risks to the safety of drinking water quality. Previous research has identified that the primary constituents of scale in DWDS are insoluble minerals, such as calcium and magnesium carbonate. Elevated levels of hardness and alkalinity in the water can exacerbate scale formation. To address the scaling issue, softening technologies like induced crystallization, nanofiltration/reverse osmosis, and ion exchange are currently in widespread use. These methods effectively mitigate the scaling in DWDS by reducing the water's hardness and alkalinity. However, the application of softening technologies not only alters the hardness and alkalinity but also induces changes in the fundamental characteristics of water quality, leading to transition effects within the DWDS. This article reviews the impact of various softening technologies on the intrinsic properties of water quality and highlights the merits of electrochemical characteristic indicators in the assessment of water quality stability. Additionally, the paper delves into the factors that influence the transition effects in DWDS. It concludes with a forward-looking proposal to leverage artificial intelligence, specifically machine learning and neural networks, to develop an evaluation and predictive framework for the stability of drinking water quality and the transition effects observed in DWDS. This approach aims to provide a more accurate and proactive method for managing and predicting the impacts of water treatment processes on distribution system integrity and water quality over time.

The escalating threat of human-associated infectious bacteria in surface aquatic resources: Insights into prevalence, antibiotic resistance, survival mechanisms, detection, and prevention strategies

Anthropogenic activities and climate change profoundly impact water quality, leading to a concerning increase in the prevalence and abundance of bacterial pathogens across diverse aquatic environments. This rise has resulted in a growing challenge concerning the safety of water sources, particularly surface waters and marine environments. This comprehensive review delves into the multifaceted challenges presented by bacterial pathogens, emphasizing threads to human health within ground and surface waters, including marine ecosystems. The exploration encompasses the intricate survival mechanisms employed by bacterial pathogens and the proliferation of antimicrobial resistance, largely driven by human-generated antibiotic contamination in aquatic systems. The review further addresses prevalent pathogenic bacteria, elucidating associated risk factors, exploring their eco-physiology, and discussing the production of potent toxins. The spectrum of detection techniques, ranging from conventional to cutting-edge molecular approaches, is thoroughly examined to underscore their significance in identifying and understanding waterborne bacterial pathogens. A critical aspect highlighted in this review is the imperative for real-time monitoring of biomarkers associated with waterborne bacterial pathogens. This monitoring serves as an early warning system, facilitating the swift implementation of action plans to preserve and protect global water resources. In conclusion, this comprehensive review provides fresh insights and perspectives, emphasizing the paramount importance of preserving the quality of aquatic resources to safeguard human health on a global scale.

Emerging contaminants: A One Health perspective

Environmental pollution is escalating due to rapid global development that often prioritizes human needs over planetary health. Despite global efforts to mitigate legacy pollutants, the continuous introduction of new substances remains a major threat to both people and the planet. In response, global initiatives are focusing on risk assessment and regulation of emerging contaminants, as demonstrated by the ongoing efforts to establish the UN's Intergovernmental Science-Policy Panel on Chemicals, Waste, and Pollution Prevention. This review identifies the sources and impacts of emerging contaminants on planetary health, emphasizing the importance of adopting a One Health approach. Strategies for monitoring and addressing these pollutants are discussed, underscoring the need for robust and socially equitable environmental policies at both regional and international levels. Urgent actions are needed to transition toward sustainable pollution management practices to safeguard our planet for future generations.

Systematic investigation and modeling prediction of virus inactivation by ozone in wastewater: Decoupling the matrix effects

Water disinfection is undoubtedly regarded as a critical step in ensuring the water safety for human consumption, and ozone is widely used as a highly effective disinfectant for the control of pathogenic microorganisms in water. Although the diminished ozone efficiencies in complex water matrices have been widely reported, the specific extent to which individual components of matrix act on the virus inactivation by ozone remains unclear, and effective methodologies to predict the comprehensive effects of various factors are needed. In this study, the decoupled impact of the intricate water matrix on the ozone inactivation of viruses was systematically investigated and assessed from a simulative perspective. The concept of "equivalent ozone depletion rate constant" (k') was introduced to quantify the influence of different species, and a kinetic model was developed based on the k' values for simulating the ozone inactivation processes in complex matrix. The mechanisms through which diverse species influenced the ozone inactivation effectiveness were identified: 1) competition effects (k' = 105∼107 M-1s-1), including organic matters and reductive ions (SO32-, NO2-, and I-), which were the most influential species inhibiting the virus inactivation; 2) shielding effects (k' = 103∼104 M-1s-1), including Ca2+, Mg2+, and kaolin; 3) insignificant effects (k' = 0∼1 M-1s-1), including Cl-, SO42-, NO3-, NH4+, and Br-; 4) promotion effects (k' = ∼-103 M-1s-1), including CO32- and HCO3-. Prediction of ozone disinfection efficiency and evaluation of species contribution under complex aquatic matrices were successfully realized utilizing the model. The systematic understanding and methodologies developed in this research provide a reliable framework for predicting ozone inactivation efficiency under complex matrix, and a potential tool for accurate disinfectant dosage determination and interfering factors control in actual wastewater treatment processes.

Gastroenteritis Outbreaks after Contamination of Water Supply Systems: Public Health Response Gaps and Challenges, Greece, 2004-2023

BACKGROUND

waterborne disease outbreaks (WGDOs) following the contamination of drinking water remain a public health concern.

METHODS

The current study aims to assess the occurrence and identify gaps in the notification and investigation of WGDOs in Greece. Data for 2004-2023 were retrieved and summarized.

RESULTS

Thirty-five outbreaks with 6128 recorded cases were identified. The median time from the date of onset in the first cases to reporting was 7 days (range: 1-26 days). Authorities were informed by health care services in thirty (85.7%) outbreaks and by the media in five (14.3%). The investigation methods used varied. An analytical study was conducted in nine (25.7%) outbreaks and the testing of clinical samples in twenty-seven (77.1%). In three (11.1%) outbreaks, clinical samples were simultaneously tested for multiple bacteria, viruses, and parasites. Water samples were collected in nineteen (54.3%) outbreaks (in three after chlorination) with a mean time lag of 5 days (range: 1-20 days) from the first cases. A pathogen in clinical samples was identified in 20 (57.1%) outbreaks and, in 1 (6.25%), the same microorganism was isolated in both clinical and water samples.

CONCLUSIONS

delays in reporting and the heterogeneity of investigations depict that the surveillance of WGDOs and response practices should be strengthened, and operational procedures should be standardised.

Associations of diet with infectious diseases in UK Biobank

This research aims to utilize multivariate logistic regression to explore associations between the frequency of 13 food groups intake (or four diet groups) and infectious diseases. 487849 participants from the UK Biobank were enrolled, and 75209 participants were diagnosed with infectious diseases. Participants reporting the highest intake frequency of processed meat [odds ratio ( OR) = 1.0964; 95% CI: 1.0622-1.1318] and red meat ( OR = 1.0895; 95% CI: 1.0563-1.1239) had a higher risk of infectious diseases compared to those with the lowest intake frequency. Consuming fish 2.0-2.9 times ( OR = 0.8221; 95% CI: 0.7955-0.8496), cheese ≥5.0 times ( OR = 0.8822; 95% CI: 0.8559-0.9092), fruit 3.0-3.9 servings ( OR = 0.8867; 95% CI: 0.8661-0.9078), and vegetables 2.0-2.9 servings ( OR = 0.9372; 95% CI: 0.9189-0.9559) per week were associated with a lower risk of infection. Low meat-eaters ( OR = 0.9404; 95% CI: 0.9243-0.9567), fish-eaters ( OR = 0.8391; 95% CI: 0.7887-0.8919), and vegetarians ( OR = 0.9154; 95% CI: 0.8561-0.9778) had a lower risk of infectious diseases compared to regular meat-eaters. Mediation analysis was performed, revealing glycosylated hemoglobin, white blood cell counts, and body mass index were mediators in the relationships between diet groups and infectious diseases. This study suggested that intake frequency of food groups is a factor in infectious diseases and fish-eaters have a lower risk of infection.

Monitoring of enteropathogenic Gram-negative bacteria in wastewater treatment plants: a multimethod approach

The wastewater treatment processes are associated with the emission of microbial aerosols, including enteropathogenic bacteria. Their presence in this work environment poses a real threat to the health of employees, both through the possibility of direct inhalation of the contaminated air and indirectly through the pollution of all types of surfaces with such bioaerosol particles. This study aimed to investigate the prevalence of enteropathogenic bacteria in the air, on surfaces, and in wastewater samples collected in four wastewater treatment plants (WWTPs). The effectiveness of conventional culture-biochemical, as well as spectrometric and molecular methods for the rapid detection of enteropathogenic bacteria at workstations related to particular stages of wastewater processing, was also evaluated. Bioaerosol, surface swab, and influent and effluent samples were collected from wastewater plants employing mechanical-biological treatment technologies. The air samples were collected using MAS-100 NT impactor placed at a height of 1.5 m above the floor or ground, simulating aspiration from the human breathing zone. Surface samples were collected with sterile swabs from different surfaces (valves, handles, handrails, and coveyor belts) at workplaces. The raw influent and treated effluent wastewater samples were aseptically collected using sterile bottles. The identification of bacterial entheropathogens was simultaneously conducted using a culture-based method supplemented with biochemical (API) tests, mass-spectrometry (MALDI TOF MS), and molecular (multiplex real-time PCR) methods. This study confirmed the common presence of bacterial pathogens (including enteropathogenic and enterotoxigenic Escherichia coli, Salmonella spp., Campylobacter spp., and Yersinia enterocolitica) in all air, surface, and wastewater samples at studied workplaces. Higher concentrations of enteropathogenic bacteria were observed in the air and on surfaces at workplaces where treatment processes were not hermetized. The results of this study underline that identification of enteropathogenic bacteria in WWTPs is of great importance for the correct risk assessment at workplaces. From the analytical point of view, the control of enteropathogenic bacterial air and surface pollution using rapid multiplex-PCR method should be routinely performed as a part of hygienic quality assessment in WWTPs.

Spread and persistence of antimicrobial resistance genes in wastewater from human and animal sources in São Paulo, Brazil

The spread of antimicrobial resistance (AMR) through multiple reservoirs is a global concern. Wastewater is a critical AMR dissemination source, so this study aimed to assess the persistence of resistance genetic markers in wastewater using a culture-independent approach. Raw and treated wastewater samples (n = 121) from a wastewater treatment plant (WWTP), a human hospital, a veterinary hospital, and a pig farm were monthly collected and concentrated by filtration. DNA was extracted directly from filter membranes, and PCR was used in the qualitative search of 32 antimicrobial resistance genes (ARGs). Selected genes (blaCTX-M, blaKPC, qnrB, and mcr-1) were enumerated by quantitative real-time PCR (qPCR). Twenty-six ARGs were detected in the qualitative ARGs search, while quantitative data showed a low variation of the ARG's relative abundance (RA) throughout the months, especially at the human hospital and the WWTP. At the WWTP, despite significantly reducing the absolute number of gene copies/L after each treatment stage (p < 0.05), slight increases (p > 0.05) in the RAs of genes blaCTX-M, qnrB, and mcr-1 were observed in reused water (tertiary treatment) when compared with secondary effluent. Although the increase is not statistically significant, it is worth noting that there was some level of ARGs concentration after the disinfection process. No significant absolute or relative after-treatment quantification reductions were observed for any ARGs at the veterinary hospital or the pig farm. The spread of ARGs through sewage needs to be continuously addressed, because their release into natural environments may pose potential risks of exposure to resistant bacteria and impact local ecosystems.

Metabolic response of bacterial community to sodium hypochlorite and ammonia nitrogen affected the antibiotic resistance genes in pipelines biofilm

The biofilm is important for the antibiotic resistance genes (ARGs) propagation in drinking water pipelines. This study investigated the influence of chlorine disinfection and ammonia nitrogen on the ARGs in pipelines biofilm using metagenomic and metabolomics analysis. Chlorine disinfection reduced the relative abundance of unclassified_c_Actinobacteria, Acidimicrobium, and Candidatus_Pelagibacter to 394-430 TPM, 114-123 TPM, and 49-54 TPM, respectively. Correspondingly, the ARGs Saur_rpoC_DAP, macB, and mfd was reduced to 8-12 TPM, 81-92 TPM and 30-35 TPM, respectively. The results of metabolomics suggested that chlorine disinfection suppressed the pathways of ABC transporters, fatty acid biosynthesis, biosynthesis of unsaturated fatty acids, and biosynthesis of amino acids. These pathways were related to the cell membrane integrality and extracellular polymeric substances (EPS) secretion. Chlorine disinfection induced the decrease of EPS-related genes, resulting in the lower relative abundance of bacterial community and their antibiotic resistance. However, added approximately 0.5 mg/L NH3-N induced up-regulation of these metabolic pathways. In addition, NH3-N addition increased the relative abundance of enzymes related to inorganic and organic nitrogen metabolic pathway significantly, such as ammonia monooxygenase, glutamine synthetase, and glutamate synthase. Due to the EPS protection and nitrogen metabolism, the relative abundance of the main bacterial genera and the related ARGs increased to the level equal to that in pipelines biofilm with no disinfection. Therefore, NH3-N reduced the ARGs removal efficiency of chlorine disinfection. It is necessary to take measures to improve the removal rate of NH3-N and ARGs for preventing their risks in drinking water.

Carbon-Based Nanomaterials 4.0

Research on carbon-based nanomaterials, such as carbon nanotubes and graphene and its derivatives, has experienced exponential development in recent years [...].

A Community Waterborne Salmonella Bovismorbificans Outbreak in Greece

BACKGROUND

In August 2022, the Hellenic National Public Health Organisation was notified about a gastroenteritis outbreak in town A in Southern Greece. Investigations aimed to identify the source and implement control measures.

METHODS

Case definition categories were used in a 1:3 case-control study. Cases and controls were interviewed about various exposures. Cases' stool samples were cultured on agar plates and characterised by serotyping, antimicrobial susceptibility testing and Pulse Field Gel Electrophoresis (PFGE). Environmental investigations included tap water sampling for microbiological and chemical analysis in town A and inspection of the water supply system.

RESULTS

We identified 33 cases (median age: 17 years). Tap water consumption was the only significant risk factor for gastroenteritis (OR = 5.46, 95% CI = 1.02-53.95). Salmonella (S.) Bovismorbificans isolated from eight stool and one tap water samples had identical PFGE profiles. No resistant isolates were identified. Residual chlorine levels were lower than the acceptable limits before and during the outbreak. We advised consumption of bottled water and adherence to strict hand hygiene rules until tap water was declared suitable for drinking.

CONCLUSIONS

Epidemiological and molecular data revealed a waterborne S. Bovismorbificans outbreak in town A. We recommend local water safety authorities to ensure that residual chlorine levels comply with the legislation towards water safety planning, to mitigate risks.

Trihalomethanes in developed and developing countries

The reactions between natural organic matter, anthropogenic contaminants, ions, and disinfectants lead to the formation of disinfection by-products (DBPs) such as trihalomethanes (THMs) in drinking water. The formation of THMs is strongly related to the chlorination of water. The study's central objective was to compare the concentration of THMs in twenty developed and developing countries and their disinfection techniques. The THM concentration in 11 developed and 9 developing countries ranged from 0.5 µg/L (Germany) to 215 µg/L (Russia) and 3 µg/L (China) to 439.2 µg/L (Bangladesh), respectively. The developed country has partially succeeded in reducing THM concentration in drinking water, whereas significant steps are needed in developing countries to reduce the existing high THM concentration. The concentration of THMs in water varies among these countries because of the different water sources, water quality, environmental conditions, and efficiency of water treatment technologies. A meaningful relationship has been observed between the properties of water and the THM formation. The use of chemical disinfectants will result in new forms of DBPs that are undesirable due to their carcinogenic and mutagenic effects on human health. The DBP guidelines by various national and international agencies have helped to control and manage the THM concentration in drinking water. However, these regulatory standards are not continuously monitored. Therefore, the formation of these compounds should be prevented either by removing THMs forming precursors or by using an integrated approach for controlling THM formation by implementing advanced water treatment technology. Extensive research is desirable in domains like THM minimization strategies which are easy to deploy, scalable, and cost-effective.

Hydrothermal integration of MoO2-MoS2@rGO nanoframe networks: A promising approach for efficient bacterial disinfection in wastewater

The efficient disinfection of bacterial contaminants in wastewater is a critical challenge in the field of environmental remediation. Herein, we present a novel approach for efficient bacterial disinfection using hydrothermally integrated MoO2-MoS2@rGO nanoframe networks. The developed nanoframe networks exhibit a unique architecture comprising of molybdenum dioxide (MoO2) and molybdenum disulfide (MoS2) impregnated on algae biomass reduced graphene oxide (rGO). The as-synthesized nanoframe networks demonstrate exceptional antibacterial activity against Escherichia coli bacteria. The disinfection efficiency was evaluated by measuring the bacterial viability and observing the morphological changes using scanning electron microscopy. The MoO2-MoS2@rGO nanoframe networks exhibited a remarkable antibacterial effect, achieving a high disinfection rate of 95.8% within a short contact time of 10 min. The efficient bacterial disinfection capability of the nanoframe networks can be attributed to the synergistic effects of MoO2, MoS2, and rGO components. The MoO2 nanoparticles generate reactive oxygen species (ROS), persuading oxidative stress and leading to bacterial inactivation. The MoS2 nanoparticles possess inherent antibacterial properties through the release of Mo and S ions. The rGO nanosheets provide a conductive and stable platform, facilitating the charge transfer during the antibacterial process. Furthermore, the hydrothermal integration method enables easy scalability and cost-effectiveness of the MoO2-MoS2@rGO nanoframe networks. The nanoframe networks can be easily recovered and reused, reducing waste generation and promoting sustainability. Overall, this study presents a promising approach for efficient bacterial disinfection in wastewater using hydrothermally integrated MoO2-MoS2@rGO nanoframe networks. The remarkable antibacterial performance, along with the advantages of scalability and reusability, makes these nanoframe networks a potential candidate for practical applications in environmental remediation and water treatment processes.

Water, Water Everywhere, but Every Drop Unique: Challenges in the Science to Understand the Role of Contaminants of Emerging Concern in the Management of Drinking Water Supplies

The protection and management of water resources continues to be challenged by multiple and ongoing factors such as shifts in demographic, social, economic, and public health requirements. Physical limitations placed on access to potable supplies include natural and human-caused factors such as aquifer depletion, aging infrastructure, saltwater intrusion, floods, and drought. These factors, although varying in magnitude, spatial extent, and timing, can exacerbate the potential for contaminants of concern (CECs) to be present in sources of drinking water, infrastructure, premise plumbing and associated tap water. This monograph examines how current and emerging scientific efforts and technologies increase our understanding of the range of CECs and drinking water issues facing current and future populations. It is not intended to be read in one sitting, but is instead a starting point for scientists wanting to learn more about the issues surrounding CECs. This text discusses the topical evolution CECs over time (Section 1), improvements in measuring chemical and microbial CECs, through both analysis of concentration and toxicity (Section 2) and modeling CEC exposure and fate (Section 3), forms of treatment effective at removing chemical and microbial CECs (Section 4), and potential for human health impacts from exposure to CECs (Section 5). The paper concludes with how changes to water quantity, both scarcity and surpluses, could affect water quality (Section 6). Taken together, these sections document the past 25 years of CEC research and the regulatory response to these contaminants, the current work to identify and monitor CECs and mitigate exposure, and the challenges facing the future.

HPV co-infections with other pathogens in cancer development: A comprehensive review

High-risk human papillomaviruses (HR-HPVs) cause various malignancies in the anogenital and oropharyngeal regions. About 70% of cervical and oropharyngeal cancers are caused by HPV types 16 and 18. Notably, some viruses including herpes simplex virus, Epstein-Barr virus, and human immunodeficiency virus along with various bacteria often interact with HPV, potentially impacting its replication, persistence, and cancer progression. Thus, HPV infection can be significantly influenced by co-infecting agents that influence infection dynamics and disease progression. Bacterial co-infections (e.g., Chlamydia trachomatis) along with bacterial vaginosis-related species also interact with HPV in genital tract leading to viral persistence and disease outcomes. Co-infections involving HPV and diverse infectious agents have significant implications for disease transmission and clinical progression. This review explores multiple facets of HPV infection encompassing the co-infection dynamics with other pathogens, interaction with the human microbiome, and its role in disease development.

Biocidal activity of multifunctional cuprite-doped anion exchanger - Influence of bacteria type and medium composition

The study presents unconventional, bifunctional, heterogeneous antimicrobial agents - Cu2O-loaded anion exchangers. The synergetic effect of a cuprous oxide deposit and polymeric support with trimethyl ammonium groups was studied against the reference strains of Enterococcus faecalis ATCC 29212 and Pseudomonas aeruginosa ATCC 27853. Biological testing (minimum bactericidal concentration, MBC), time- and dose-dependent bactericidal effect (under different conditions - medium composition and static/dynamic culture) demonstrated promising antimicrobial activity and confirmed its multimode character. The standard values of MBC, for all studied hybrid polymers and bacteria, were similar (64-128 mg/mL). However, depending on the medium conditions, due to the copper release into the bulk solution, bacteria were actively killed even at much lower doses of the hybrid polymer (25 mg/mL) and low Cu(II) concentrations in solution (0.01 mg/L). Simultaneously, confocal microscopic studies confirmed the effective inhibition of bacterial adhesion and biofilm formation on their surface. The studies conducted under different conditions showed also the influence of the structure and physical properties of studied materials on the biocidal efficacy and an antimicrobial action mechanism was proposed that could be significantly affected by electrostatic interactions and copper release to the solution. Although the antibacterial activity was also dependent on various strategies of bacterial cell resistance to heavy metals present in the aqueous medium, the studied hybrid polymers are versatile and efficient biocidal agents against bacteria of both types, Gram-positive and Gram-negative. Therefore, they can be a convenient alternative for point-of-use water disinfection systems providing water quality in medical devices such as dental units, spa equipment, and aesthetic devices used in the cosmetic sector.

The Fascinating Cross-Paths of Pathogenic Bacteria, Human and Animal Faecal Sources in Water-Stressed Communities of Vhembe District, South Africa

Access to clean and safe drinking water still remains a major challenge in the developing world, causing public health risks in terms of waterborne infections, especially in rural areas of sub-Saharan Africa. This study aimed to track and detect enteric pathogens (Salmonella enterica subsp. enterica serovar Typhimurium str. LT2, Shigella flexneri, and Campylobacter jejuni subsp. jejuni) in rural water sources. It also sought to establish a correlation between these pathogens and the sources of faecal pollution. Multiplex qPCR and specific primers and probes were used for detection and tracking. The study successfully correlated the occurrence of target pathogens with sources of human and animal faecal contamination using host-specific genetic markers (BacHum and HF183 for humans, BacCow for cows, Pig-2-Bac for pigs, Cytb for chickens, and BacCan for dogs). The study revealed that enteric pathogens were found in 47.69% and 32.80% of samples during the wet and dry seasons, respectively. These pathogens were associated with human or animal faecal contamination. Correlations between pathogens and contamination sources were significant (p ≤ 0.05), with varying strengths during the wet and dry seasons. The findings emphasize the importance of identifying faecal contamination sources to protect rural communities from waterborne infections.

Examining the microbial composition of natural springs in Bhaderwah, Jammu and Kashmir, India

Natural springs are the main source of water supply for domestic and agricultural use for humans living in the mountainous regions of Asia. Increasing anthropogenic activities with associated waste load, coupled with inadequate sanitation, and contamination of natural water resources and the environment are emerging as important public health issues. We performed a prospective microbiological and physicochemical investigation of water samples from seven distinct natural springs situated at an altitude of 1615 m in the Bhaderwah region of Jammu and Kashmir, India. Bacterial groups belonging to opportunistic pathogens such as members of Moraxellaceae (Acinetobacter), Arcobacteraceae (Pseudoarcobacter), Pseudomonadaceae (Pseudomonas), Oxalobacteraceae (Massilia), and Flavobacteriaceae (Flavobacterium) were observed. The total coliform test indicated an intermediate level of risk of fecal contamination of the springs, except for one site. Through a questionnaire-based survey of the local population, we discovered that around 40% of participants had suffered from waterborne diseases including typhoid (~14%) and diarrhea (~11%). Our data suggests that increased surveillance of fecal contamination and heterotrophic opportunistic pathogens is needed to enhance water quality and reduce health risks for people living in mountainous regions.

Detecting Enteric Pathogens in Low-Risk Drinking Water in Dhaka, Bangladesh: An Assessment of the WHO Water Safety Categories

The microbiological quality of water is usually assessed by fecal coliform bacteria, and the presence of E. coli as an indicator of fecal contamination is widely recommended by international guidelines. This study aimed to assess the prevalence of diarrheagenic pathogens, in both public and personal domain water sources and examine the reliance on the WHO drinking water risk assessment guidelines. This study was conducted in a low-income urban community in Dhaka, Bangladesh between September 2014 and October 2015. Polymerase chain reaction (PCR) was used to detect the marker and virulence genes of Escherichia coli, Vibrio cholerae, Salmonella species, and Campylobacter species, and the culture method was employed for the quantitative assessment of E. coli. According to the WHO guidelines, 48% of the public domain source water and 21% of the personal domain point-of-drinking water were classified in the low-risk group, i.e., 0 CFU of E. coli/100 mL. However, when using PCR, we detected pathogens in 39% (14/36) of the point-of-drinking water samples and 65% (74/114) of the public domain water source samples classified in the low-risk group. Our study showed that relying solely on E. coli detection as a measure of water quality may overlook the presence of other pathogens in the drinking water. In addition to the culture-based method, the detection of virulence genes by PCR should also be considered to add more scrutiny to the detection of diverse types of pathogens.

Fluence-based QMRA model for bacterial photorepair and regrowth in drinking water after decentralized UV disinfection

Ultraviolet disinfection is a promising solution for decentralized drinking water systems such as communal water taps. A potential health risk is enzymatic photorepair of pathogens after UV disinfection, which can result in regrowth of pathogens. Even though photorepair is a known issue, no formal risk assessments have been conducted for photorepair after UV disinfection in drinking water. The main objective was to construct a quantitative microbial risk assessment (QMRA) of photorepair after UV disinfection of drinking water in a decentralized system. UV disinfection and photorepair kinetics for E. coli were modelled using reproducible fluence-based determinations. Impacts of water collection patterns, and wavelength-dependent water container material transmittance, sunlight intensity, and photorepair enzyme absorbance were quantified. After UV disinfection by 16 or 40 mJ/cm² of < 5-log microorganisms per L, risk of infection did not exceed 1-in-10,000 under conditions permitting E. coli photorepair. Risk from photorepair was less than 1-in-10,000 for photorepair light exposure < 0.75 h throughout the day for UV fluence 16 mJ/cm² or greater. UV disinfection followed by solar disinfection surpassing photoreactivation during storage reduced risk below 1-in-10,000 for photorepair light exposure > 2.5 h between modelled times of 9 AM - 3 PM. The model can be expanded to other pathogens as UV fluence and photorepair fluence response kinetics become available, and this QMRA can be used to inform the placement of community water access points to reduce risk of photorepair and ensure adequate shelf life of UV disinfected water under safe storage conditions.

CrAssphage May Be Viable Markers of Contamination in Pristine and Contaminated River Water

Viruses are the most biologically abundant entities and may be ideal indicators of fecal pollutants in water. Anthropogenic activities have triggered drastic ecosystem changes in rivers, leading to substantial shifts in chemical and biological attributes. Here, we evaluate the viability of using the presence of crAssphage as indicators of fecal contamination in South African rivers. Shotgun analysis revealed diverse crAssphage viruses in these rivers, which are impacted by chemical and biological pollution. Overall, the diversity and relative abundances of these viruses was higher in contaminated sites compared to pristine locations. In contrast to fecal coliform counts, crAssphage sequences were detected in pristine rivers, supporting the assertion that the afore mentioned marker may be a more accurate indicator of fecal contamination. Our data demonstrate the presence of diverse putative hosts which includes members of the phyla Bacteroidota, Pseudomonadota, Verrucomicrobiota, and Bacillota. Phylogenetic analysis revealed novel subfamilies, suggesting that rivers potentially harbor distinct and uncharacterized clades of crAssphage. These data provide the first insights regarding the diversity, distribution, and functional roles of crAssphage in rivers. Taken together, the results support the potential application of crAssphage as viable markers for water quality monitoring. IMPORTANCE Rivers support substantial populations and provide important ecosystem services. Despite the application of fecal coliform tests and other markers, we lack rapid and reproducible approaches for determining fecal contamination in rivers. Waterborne viral outbreaks have been reported even after fecal indicator bacteria (FIB) were suggested to be absent or below regulated levels of coliforms. This indicates a need to develop and apply improved indicators of pollutants in aquatic ecosystems. Here, we evaluate the viability of crAssphage as indicators of fecal contamination in two South African rivers. We assess the abundance, distribution, and diversity of these viruses in sites that had been predicted pristine or contaminated by FIB analysis. We show that crAssphage are ideal and sensitive markers for fecal contamination and describe novel clades of crAss-like phages. Known crAss-like subfamilies were unrepresented in our data, suggesting that the diversity of these viruses may reflect geographic locality and dependence.

A comparative analysis employing a gene- and genome-centric metagenomic approach reveals changes in composition, function, and activity in waterworks with different treatment processes and source water in Finland

The emergence and development of next-generation sequencing technologies (NGS) has made the analysis of the water microbiome in drinking water distribution systems (DWDSs) more accessible and opened new perspectives in microbial ecology studies. The current study focused on the characterization of the water microbiome employing a gene- and genome-centric metagenomic approach to five waterworks in Finland with different raw water sources, treatment methods, and disinfectant. The microbial communities exhibit a distribution pattern of a few dominant taxa and a large representation of low-abundance bacterial species. Changes in the community structure may correspond to the presence or absence and type of disinfectant residual which indicates that these conditions exert selective pressure on the microbial community. The Archaea domain represented a small fraction (up to 2.5%) and seemed to be effectively controlled by the disinfection of water. Their role particularly in non-disinfected DWDS may be more important than previously considered. In general, non-disinfected DWDSs harbor higher microbial richness and maintaining disinfectant residual is significantly important for ensuring low microbial numbers and diversity. Metagenomic binning recovered 139 (138 bacterial and 1 archaeal) metagenome-assembled genomes (MAGs) that had a >50% completeness and <10% contamination consisting of 20 class representatives in 12 phyla. The presence and occurrence of nitrite-oxidizing bacteria (NOB)-like microorganisms have significant implications for nitrogen biotransformation in drinking water systems. The metabolic and functional complexity of the microbiome is evident in DWDSs ecosystems. A comparative analysis found a set of differentially abundant taxonomic groups and functional traits in the active community. The broader set of transcribed genes may indicate an active and diverse community regardless of the treatment methods applied to water. The results indicate a highly dynamic and diverse microbial community and confirm that every DWDS is unique, and the community reflects the selection pressures exerted at the community structure, but also at the levels of functional properties and metabolic potential.

Advanced Polymeric Nanocomposite Membranes for Water and Wastewater Treatment: A Comprehensive Review

Nanomaterials have been extensively used in polymer nanocomposite membranes due to the inclusion of unique features that enhance water and wastewater treatment performance. Compared to the pristine membranes, the incorporation of nanomodifiers not only improves membrane performance (water permeability, salt rejection, contaminant removal, selectivity), but also the intrinsic properties (hydrophilicity, porosity, antifouling properties, antimicrobial properties, mechanical, thermal, and chemical stability) of these membranes. This review focuses on applications of different types of nanomaterials: zero-dimensional (metal/metal oxide nanoparticles), one-dimensional (carbon nanotubes), two-dimensional (graphene and associated structures), and three-dimensional (zeolites and associated frameworks) nanomaterials combined with polymers towards novel polymeric nanocomposites for water and wastewater treatment applications. This review will show that combinations of nanomaterials and polymers impart enhanced features into the pristine membrane; however, the underlying issues associated with the modification processes and environmental impact of these membranes are less obvious. This review also highlights the utility of computational methods toward understanding the structural and functional properties of the membranes. Here, we highlight the fabrication methods, advantages, challenges, environmental impact, and future scope of these advanced polymeric nanocomposite membrane based systems for water and wastewater treatment applications.

Occurrence of fungal spores in drinking water: A review of pathogenicity, odor, chlorine resistance and control strategies

Fungi in drinking water have been long neglected due to the lack of convenient analysis methods, widely accepted regulations and efficient control strategies. However, in the last few decades, fungi in drinking water have been widely recognized as opportunity pathogens that cause serious damage to the health of immune-compromised individuals. In drinking water treatment plants, fungal spores are more resistant to chlorine disinfection than bacteria and viruses, which can regrow in drinking water distribution systems and subsequently pose health threats to water consumers. In addition, fungi in drinking water may represent an ignored source of taste and odor (T&O). This review identified 74 genera of fungi isolated from drinking water and presented their detailed taxonomy, sources and biomass levels in drinking water systems. The typical pathways of exposure of water-borne fungi and the main effects on human health are clarified. The fungi producing T&O compounds and their products are summarized. Data on free chlorine or monochloramine inactivation of fungal spores and other pathogens are compared. At the first time, we suggested four chlorine-resistant mechanisms including aggregation to tolerate chlorine, strong cell walls, cellular responses to oxidative stress and antioxidation of melanin, which are instructive for the future fungi control attempts. Finally, the inactivation performance of fungal spores by various technologies are comprehensively analyzed. The purpose of this study is to provide an overview of fungi distribution and risks in drinking water, provide insight into the chlorine resistance mechanisms of fungal spores and propose approaches for the control of fungi in drinking water.

Measured and Modeled Comparisons of Chemical and Microbial Contaminants in Tap and Bottled Water in a US-Mexico Border Community

Tap water quality concerns and advertisements often drive increased bottled water consumption, especially in communities with historical tap water quality problems (e.g., Nogales, Arizona). The study objective was to assess contamination of municipal tap and bottled water in Nogales, Arizona. Bottled (sealed, open/partially consumed bottles, and reusable containers for vended water) and tap water samples were collected from 30 homes and analyzed for chemical and microbial contaminants. Fisher exact tests and Wilcoxon rank sum tests were used to compare proportions of positive samples and contaminant concentrations between tap and bottled water samples. While none of the chemical contaminants were above MCLs, there were statistically significantly greater concentrations and proportions of positive samples for some contaminants, including arsenic, in tap vs. bottled water. E. coli concentrations were >0 CFU/100mL in some unsealed bottled water samples but not for sealed bottles. This study demonstrates that 1) the measured concentrations in tap and bottled water likely pose low risks, as they are below the MCLs, 2) more education in this community on hygiene maintenance of refillable or opened bottled water containers is needed, and 3) using tap water over bottled water is advantageous due to likely lower E. coli risk and lower cost.

Membrane technology as an emergency response against drinking water shortage in scenarios of dam failure

With dam failure events, there can be changes in water quality and difficulties in the operation of water treatment plants (WTPs) since they were not designed for water treatment under severe pollution conditions. To avoid that, it was investigated two strategies based on pre-oxidation, ultrafiltration (UF) and reverse osmosis (RO) integrated into a conventional treatment process (coagulation, flocculation, and sand filtration) or with each other, with the potential to reduce the risks of drinking water shortage and guarantee a safe drinking water supply. The study considered the context of the Velhas river basin (Brazil), where water quality is compromised by high turbidities (500-3000 NTU) and excessive arsenic (∼0.4 mg/L), iron (∼50 mg/L), and manganese (∼3 mg/L) levels. They were only partially removed by conventional treatments (removals: 74 ± 21%) and potability standards were only achieved after the membrane separation processes were considered (As: <0.01 mg/L, Mn: <0.1 mg/L, and Fe: <0.3 mg/L). The high water quality after RO enables its blend with the stream obtained after sand filters and would allow for greater flexibility during the operation of WTPs operation. Despite the susceptibility to fouling and most frequent maintenance, the pre-oxidation-UF-RO system would also guarantee a safe drinking water supply. The decision for the most adequate strategy was then based on a multicriteria analysis. A retrofit of conventional WTPs by their integration with UF-RO was classified as the best strategy for centralized facilities, whereas pre-oxidation-UF-RO better fits the reality of decentralized treatments given the lower costs and deployment time. The methodology based on multicriteria analysis and water treatment technologies, exemplified by membranes in this study, presented satisfactory results for different scenarios of critical treatment.

An Evaluation of the Biocatalyst for the Synthesis and Application of Zinc Oxide Nanoparticles for Water Remediation—A Review

Global water scarcity is threatening the lives of humans, and it is exacerbated by the contamination of water, which occurs because of increased industrialization and soaring population density. The available conventional physical and chemical water treatment techniques are hazardous to living organisms and are not environmentally friendly, as toxic chemical elements are used during these processes. Nanotechnology has presented a possible way in which to solve these issues by using unique materials with desirable properties. Zinc oxide nanoparticles (ZnO NPs) can be used effectively and efficiently for water treatment, along with other nanotechnologies. Owing to rising concerns regarding the environmental unfriendliness and toxicity of nanomaterials, ZnO NPs have recently been synthesized through biologically available and replenishable sources using a green chemistry or green synthesis protocol. The green-synthesized ZnO NPs are less toxic, more eco-friendly, and more biocompatible than other chemically and physically synthesized materials. In this article, the biogenic synthesis and characterization techniques of ZnO NPs using plants, bacteria, fungi, algae, and biological derivatives are reviewed and discussed. The applications of the biologically prepared ZnO NPs, when used for water treatment, are outlined. Additionally, their mechanisms of action, such as the photocatalytic degradation of dyes, the production of reactive oxygen species (ROS), the generation of compounds such as hydrogen peroxide and superoxide, Zn2+ release to degrade microbes, as well as their adsorbent properties with regard to heavy metals and other contaminants in water bodies, are explained. Furthermore, challenges facing the green synthesis of these nanomaterials are outlined. Future research should focus on how nanomaterials should reach the commercialization stage, and suggestions as to how this ought to be achieved are presented.

Electrospun tannin-rich nanofibrous solid-state membrane for wastewater environmental monitoring and remediation

Heavy metal, organic dyes, and bacterial contamination in water endanger human/animals' health, and therefore, the detection, adsorption, and capturing of contaminants are essential for environmental safety. Ligand-rich membranes are promising for sensors, adsorption, and bacterial decontamination. Herein, tannin (TA)-reinforced 3-aminopropyltriethoxysilane (APTES) crosslinked polycaprolactone (PCL) based nanofibrous membrane (PCL-TA-APTES) was fabricated via electrospinning. PCL-TA-APTES nanofibers possess superior thermal, mechanical, structural, chemical, and aqueous stability properties than the un-crosslinked membrane. It changed its color from yellowish to black in response to Fe^2+/3+ ions due to supramolecular iron-tannin network (FeTA) interaction. Such selective sensing has been noticed after adsorption-desorption cycles. Fe³⁺ concentration, solution pH, contact time, and ligand concentration influence FeTA coordination. Under optimized conditions followed by image processing, the introduced membrane showed a colorimetric linear relationship against Fe³⁺ ions (16.58 μM-650 μM) with a limit of detection of 5.47 μM. The PCL-FeTA-APTES membrane could restrain phenolic group oxidation and result in a partial water-insoluble network. The adsorption filtration results showed that the PCL-FeTA-APTES membrane can be reused and had a higher methylene blue adsorption (32.04 mg/g) than the PCL-TA-APTES membrane (14.96 mg/g). The high capture efficiency of nanocomposite against Fe³⁺-based S. aureus suspension than Fe³⁺-free suspension demonstrated that Fe³⁺-bounded bacterium adhered to the nanocomposite through Fe³⁺/TA-dependent biointerface interactions. Overall, high surface area, rich phenolic ligand, porous microstructure, and super-wetting properties expedite FeTA coordination in the nanocomposite, crucial for Fe^2+/3+ ions sensing, methylene blue adsorption-filtration, and capturing of Fe³⁺-bounded bacterium. These multifunctional properties could promise nanocomposite membrane practicability in wastewater and environmental protection.

Bio-Based Ceramic Membranes for Bacteria Removal from Water

Bio-based ceramic membranes were elaborated from kaolinite clays, coconut husks and eggshells to retain E. coli bacteria present in water intended for human consumption. Their characterization and removal performances are investigated in this work. These bio-ceramic membranes were obtained by heating the formulation containing 75% clay, 15% coconut husk and 10% eggshell at 900 °C or 1000 °C, at different temperature rates, to give S1, S2 and S3 materials. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), mercury porosimetry and scanning electron microscopy (SEM) were used to characterize these membranes. Water flux density, bacterial removal and biofouling were also assessed. Water flux density was shown to depend on material porosity. Bacteria retention was 90% (with 1 log-removal) for S1, 80% (with 0.7 log-removal) for S2 and 100% (with 3.3 log-removal) for S3. Membranes S1 and S2 presented reversible biofouling, while no fouling was evidenced for S3 in the tested conditions. This work shows that the best bio-ceramic membrane in terms of bacterial removal and flux density was S3. Its water flux density was 2123 ± 72 L/h/m² at an initial pressure of 0.2 bar. This material is particularly interesting because its production protocol is quite simple, fast and without the addition of chemical additives. Moreover, it can be used to efficiently remove bacteria from drinking water.

Antibiotic resistant bacteria and genes in wastewater treatment plants: From occurrence to treatment strategies

This study aims to discuss the following: (1) occurrence and proliferation of antibiotic resistance in wastewater treatment plants (WWTPs); (2) factors influencing antibiotic resistance bacteria and genes in WWTPs; (3) tools to assess antibiotic resistance in WWTPs; (4) environmental contamination of antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) from WWTPs; (5) effects of ARB and ARGs from WWTPs on human health; and (6) treatment strategies. In general, resistant and multi-resistant bacteria, including Enterobacteriaceae, Pseudomonas aeruginosa, and Escherichia coli, exist in various processes of WWTPs. The existence of ARB and ARGs results from the high concentration of antibiotics in wastewater, which promote selective pressures on the local bacteria present in WWTPs. Thus, improving wastewater treatment technology and avoiding the misuse of antibiotics is critical to overcoming the threat of proliferation of ARBs and ARGs. Numerous factors can affect the development of ARB and ARGs in WWTPs. Abiotic factors can affect the bacterial community dynamics, thereby, affecting the applicability of ARB during the wastewater treatment process. Furthermore, the organic loads and other nutrients influence bacterial survival and growth. Specifically, molecular methods for the rapid characterization and detection of ARBs or their genes comprise DNA sequencing, real-time PCR, simple and multiplex PCR, and hybridization-based technologies, including micro- and macro-arrays. The reuse of effluent from WWTPs for irrigation is an efficient method to overcome water scarcity. However, there are also some potential environmental risks associated with this practice, such as increase in the levels of antibiotic resistance in the soil microbiome. Human mortality rates may significantly increase, as ARB can lead to resistance among several types of antibiotics or longer treatment times. Some treatment technologies, such as anaerobic and aerobic treatment, coagulation, membrane bioreactors, and disinfection processes, are considered potential techniques to restrict antibiotic resistance in the environment.

Quantitative Assessment of First Nations Drinking Water Distribution Systems for Detection and Prevalence of Thermophilic Campylobacter Species

Water is considered a major route for transmitting human-associated pathogens. Although microbial water quality indicators are used to test for the presence of waterborne pathogens in drinking water, the two are poorly correlated. The current study investigates the prevalence of thermophilic DNA markers specific for Campylobacter spp. (C. jejuni and C. coli) in source water and throughout the water distribution systems of two First Nations communities in Manitoba, Canada. A total of 220 water samples were collected from various points of the drinking water distribution system (DWDS) between 2016 and 2018. Target Campylobacter spp. were always (100%) detected in a home with a fiberglass (CF) cistern, as well as the community standpipe (SP). The target bacteria were also frequently detected in treated water at the Water Treatment Plant (WTP) (78%), homes with polyethylene (CP) (60%) and concrete (CC) (58%) cisterns, homes with piped (P) water (43%) and water truck (T) samples (20%), with a maximum concentration of 1.9 × 10³ cells 100 mL^-1 (C. jejuni) and 5.6 × 10⁵ cells 100 mL^-1 (C. coli). Similarly, target bacteria were detected in 68% of the source water samples with a maximum concentration of 4.9 × 10³ cells 100 mL^-1 (C. jejuni) and 8.4 × 10⁵ cells 100 mL^-1 (C. coli). Neither target Campylobacter spp. was significantly associated with free and total chlorine concentrations in water. The study results indicate that there is an immediate need to monitor Campylobacter spp. in small communities of Canada and, particularly, to improve the DWDS in First Nations communities to minimize the risk of Campylobacter infection from drinking water sources. Further research is warranted in improving/developing processes and technologies to eliminate microbial contaminants from water.

Formation mechanisms and supervisory prediction of scaling in water supply pipelines: A review

The scaling problem in the water supply pipeline will increase the resistance coefficient of the pipeline and the pressure of the water supply pipeline, which will not only affect the operation safety of the water supply pipeline, but also cause energy waste. The scale in the pipeline will also enrich heavy metal ions and pathogenic microorganisms, affecting the safety of water supply water quality and causing secondary pollution of water quality. At present, a lot of research has been done on the composition structure and crystallization process of the scale. The study found that calcite is the main component of the scale; the scale process is a heterogeneous nucleation process induced by heavy metal particles and their corrosion products in the pipeline. The introduction of electrochemical detection technology, density functional theory and molecular dynamics simulation has greatly improved the accuracy and timeliness of water scaling conditions detection and realized the visualization of scaling mechanism. In this paper, the measurement methods of the scale in the water supply pipeline and the corresponding material composition and crystal structure characteristics are reviewed, and the mechanism of the scale and the water quality conditions are summarized. At the end of this paper, based on summarizing the existing water quality scaling tendency evaluation methods, it is proposed to establish a water quality potential scaling risk assessment framework based on Puckorius scaling index (PSI) and electrochemical impedance spectroscopy (EIS) in the future.

Synthesis of covalent organic frameworks via Kabachnik-Fields reaction for water treatment

Providing safe and clean domestic water for people is currently one of the greatest worldwide issues. In this context, heavy metal ions and pathogenic microbes are the two major factors in water pollution. The conventional water treatment methods, however, are generally high-energy and high-resource consumptive. Herein, we report, the first of its kind, the room-temperature synthesis of α-aminophosphonate-linked COFs via three-component one-pot in situ Kabachnik-Fields reaction (KF-3CR). Due to the coexistent bioactive α-aminophosphonate and photosensitive porphyrin, the obtained APCOF-1 exhibits highly efficient solar-powered bactericidal and heavy metal ion removal abilities, which allows it to be a promising COF-based multifunctional material for water treatment in an energy- and resource-saving way. Specifically, by incorporating APCOF-1 (up to 50 wt%) with eco-friendly and low-cost chitosan, an APCOF-1 @chitosan aerogel-based helical setup is fabricated via a facile templated freeze-drying approach and it can be a continuous flow-through water purifier model to achieve scaled-up water treatment through adsorptive removal of heavy metal ions and sunlight-driven sterilization. We believe that this research not only can significantly enrich the synthetic methodology of COFs, but also will hopefully bring COFs one step closer to the practical application.

A review of the global climate change impacts, adaptation, and sustainable mitigation measures

Climate change is a long-lasting change in the weather arrays across tropics to polls. It is a global threat that has embarked on to put stress on various sectors. This study is aimed to conceptually engineer how climate variability is deteriorating the sustainability of diverse sectors worldwide. Specifically, the agricultural sector's vulnerability is a globally concerning scenario, as sufficient production and food supplies are threatened due to irreversible weather fluctuations. In turn, it is challenging the global feeding patterns, particularly in countries with agriculture as an integral part of their economy and total productivity. Climate change has also put the integrity and survival of many species at stake due to shifts in optimum temperature ranges, thereby accelerating biodiversity loss by progressively changing the ecosystem structures. Climate variations increase the likelihood of particular food and waterborne and vector-borne diseases, and a recent example is a coronavirus pandemic. Climate change also accelerates the enigma of antimicrobial resistance, another threat to human health due to the increasing incidence of resistant pathogenic infections. Besides, the global tourism industry is devastated as climate change impacts unfavorable tourism spots. The methodology investigates hypothetical scenarios of climate variability and attempts to describe the quality of evidence to facilitate readers' careful, critical engagement. Secondary data is used to identify sustainability issues such as environmental, social, and economic viability. To better understand the problem, gathered the information in this report from various media outlets, research agencies, policy papers, newspapers, and other sources. This review is a sectorial assessment of climate change mitigation and adaptation approaches worldwide in the aforementioned sectors and the associated economic costs. According to the findings, government involvement is necessary for the country's long-term development through strict accountability of resources and regulations implemented in the past to generate cutting-edge climate policy. Therefore, mitigating the impacts of climate change must be of the utmost importance, and hence, this global threat requires global commitment to address its dreadful implications to ensure global sustenance.

Effective inactivation of fungal spores by the combined UV/PAA: Synergistic effect and mechanisms

Peracetic acid (PAA) can effectively inactivate fungi in water, while may pose a potential risk of regrowth after disinfection. The inactivation kinetic and mechanism of fungal spores by combined UV and PAA (UV/PAA) was investigated in this study. The results showed that synergistic factor of the inactivation of A. niger and A. flavus was 1.44 and 1.37, which indicated significant synergistic effect of UV/PAA. The k of A. niger and A. flavus was similar at pH 5.0 and 7.0, while decreased 60.00% and 39.13% at pH 9.0 compared with that at pH 7.0. The effect of HA concentration on the inactivation efficiency of fungal spores by UV/PAA was negative, while the effect of PAA concentration was positive. The membrane permeabilized cell of A. niger and A. flavus caused by UV/PAA was 17.0% and 31.7%, which was higher than that caused by PAA and UV alone. The changes of morphology of fungal spores and the leakage of intracellular material indicated that the damage of cell structure caused by UV/PAA system was more serious than that of UV or PAA alone. In addition, the four parts that contributed in UV/PAA system was in the following order: UV > radical > PAA > synergistic effect. The inactivation efficiency of combined UV and chlorine (UV/Cl₂) was higher than that of UV/PAA. Furthermore, the typical order of the inactivation efficiency in different matrix was: phosphate buffer solution > surface water > secondary effluent. The regrowth potential of fungal spores after UV/PAA treatment was significantly lower than that by PAA alone, indicating that UV/PAA could decrease the microbial regrowth potential after PAA disinfection alone.

A Review on the Prevalence of Arcobacter in Aquatic Environments

Arcobacter is an emerging pathogen that is associated with human and animal diseases. Since its first introduction in 1991, 33 Arcobacter species have been identified. Studies have reported that with the presence of Arcobacter in environmental water bodies, animals, and humans, a possibility of its transmission via water and food makes it a potential waterborne and foodborne pathogen. Therefore, this review article focuses on the general characteristics of Arcobacter, including its pathogenicity, antimicrobial resistance, methods of detection by cultivation and molecular techniques, and its presence in water, fecal samples, and animal products worldwide. These detection methods include conventional culture methods, and rapid and accurate Arcobacter identification at the species level, using quantitative polymerase chain reaction (qPCR) and multiplex PCR. Arcobacter has been identified worldwide from feces of various hosts, such as humans, cattle, pigs, sheep, horses, dogs, poultry, and swine, and also from meat, dairy products, carcasses, buccal cavity, and cloacal swabs. Furthermore, Arcobacter has been detected in groundwater, river water, wastewater (influent and effluent), canals, treated drinking water, spring water, and seawater. Hence, we propose that understanding the prevalence of Arcobacter in environmental water and fecal-source samples and its infection of humans and animals will contribute to a better strategy to control and prevent the survival and growth of the bacteria.

Microbiomes in drinking water treatment and distribution: A meta-analysis from source to tap

A meta-analysis of existing and available Illumina 16S rRNA datasets from drinking water source, treatment and drinking water distribution systems (DWDS) were collated to compare changes in abundance and diversity throughout. Samples from bulk water and biofilm were used to assess principles governing microbial community assembly and the value of amplicon sequencing to water utilities. Individual phyla relationships were explored to identify competitive or synergistic factors governing DWDS microbiomes. The relative importance of stochasticity in the assembly of the DWDS microbiome was considered to identify the significance of source and treatment in determining communities in DWDS. Treatment of water significantly reduces overall species abundance and richness, with chlorination of water providing the most impact to individual taxa relationships. The assembly of microbial communities in the bulk water of the source, primary treatment process and DWDS is governed by more stochastic processes, as is the DWDS biofilm. DWDS biofilm is significantly different from bulk water in terms of local contribution to beta diversity, type and abundance of taxa present. Water immediately post chlorination has a more deterministic microbial assembly, highlighting the significance of this process in changing the microbiome, although elevated levels of stochasticity in DWDS samples suggest that this may not be the case at customer taps. 16S rRNA sequencing is becoming more routine, and may have several uses for water utilities, including: detection and risk assessment of potential pathogens such as those within the genera of Legionella and Mycobacterium; assessing the risk of nitrification in DWDS; providing improved indicators of process performance and monitoring for significant changes in the microbial community to detect contamination. Combining this with quantitative methods like flow cytometry will allow a greater depth of understanding of the DWDS microbiome.

Water quality of springs and lakes in the Kumaon Lesser Himalayan Region of Uttarakhand, India

The scarcity of drinking water has become a bitter reality in many countries. The gap between demand and supply of water has been increasing exponentially year by year. Deforestation, vigorous use of groundwater for agricultural practices, and pollution of our present water resources such as rivers, lakes, and wells are triggering the freshwater scarcity problem. Ninety percent of people in Uttarakhand depend on springs for their daily life activities. In such a case, the quality and quantity of spring water should be a prime topic to be focussed on. In the Kumaon region of Uttarakhand, spring water quality is good but there is an issue with its availability, especially in summer. This review paper details the studies that have been conducted on nutrient status, hardness, heavy metals, and the presence of microbiological diversity in spring water. It also uncovers information on some critical springs, geological settings of their aquifers, and the steps that have been adopted to rejuvenate the spring. Some other measures have been carried out by the government and local communities for springs' revival and their improvement in discharge rate, including the construction of percolation pits, contour trenches, check dams, and improvement of water resources. It has been observed among the analyzed sample that the Kumaon region is dominated by arsenic, cadmium, chromium, and lead, whereas aluminum, barium, cobalt, and manganese are more in the Garhwal region. Apart from springs, this review paper also reveals the physicochemical characteristics of the spring-fed rivers and lakes of the Kumaon region.

Tenets of a holistic approach to drinking water-associated pathogen research, management, and communication

In recent years, drinking water-associated pathogens that can cause infections in immunocompromised or otherwise susceptible individuals (henceforth referred to as DWPI), sometimes referred to as opportunistic pathogens or opportunistic premise plumbing pathogens, have received considerable attention. DWPI research has largely been conducted by experts focusing on specific microorganisms or within silos of expertise. The resulting mitigation approaches optimized for a single microorganism may have unintended consequences and trade-offs for other DWPI or other interests (e.g., energy costs and conservation). For example, the ecological and epidemiological issues characteristic of Legionella pneumophila diverge from those relevant for Mycobacterium avium and other nontuberculous mycobacteria. Recent advances in understanding DWPI as part of a complex microbial ecosystem inhabiting drinking water systems continues to reveal additional challenges: namely, how can all microorganisms of concern be managed simultaneously? In order to protect public health, we must take a more holistic approach in all aspects of the field, including basic research, monitoring methods, risk-based mitigation techniques, and policy. A holistic approach will (i) target multiple microorganisms simultaneously, (ii) involve experts across several disciplines, and (iii) communicate results across disciplines and more broadly, proactively addressing source water-to-customer system management.

Pathogen Control in the Built Environment: A Probiotic-Based System as a Remedy for the Spread of Antibiotic Resistance

The high and sometimes inappropriate use of disinfectants and antibiotics has led to alarming levels of Antimicrobial Resistance (AMR) and to high water and hearth pollution, which today represent major threats for public health. Furthermore, the current SARS-CoV-2 pandemic has deeply influenced our sanitization habits, imposing the massive use of chemical disinfectants potentially exacerbating both concerns. Moreover, super-sanitation can profoundly influence the environmental microbiome, potentially resulting counterproductive when trying to stably eliminate pathogens. Instead, environmentally friendly procedures based on microbiome balance principles, similar to what applied to living organisms, may be more effective, and probiotic-based eco-friendly sanitation has been consistently reported to provide stable reduction of both pathogens and AMR in treated-environments, compared to chemical disinfectants. Here, we summarize the results of the studies performed in healthcare settings, suggesting that such an approach may be applied successfully also to non-healthcare environments, including the domestic ones, based on its effectiveness, safety, and negligible environmental impact.

A critical review on various remediation approaches for heavy metal contaminants removal from contaminated soils

Heavy metal pollution remains a global environmental challenge that poses a significant threat to human life. Various methods have been explored to eliminate heavy metal pollutants from the environment. However, most methods are constrained by high expenses, processing duration, geological problems, and political issues. The immobilization of metals, phytoextraction, and biological methods have proven practical in treating metal contaminants from the soil. This review focuses on the general status of heavy metal contamination of soils, including the excessive heavy metal concentrations in crops. The assessment of the recent advanced technologies and future challenges were reviewed. Molecular and genetic mechanisms that allow microbes and plants to collect and tolerate heavy metals were elaborated. Tremendous efforts to remediate contaminated soils have generated several challenges, including the need for remediation methodologies, degrees of soil contamination, site conditions, widespread adoptions and various possibilities occurring at different stages of remediation are discussed in detail.