Micro(nano)plastics pollution and human health: How plastics can induce carcinogenesis to humans?

Enhanced hepatic metabolic perturbation of polystyrene nanoplastics by UV irradiation-induced hydroxyl radical generation

The environmental behavior of and risks associated with nanoplastics (NPs) have attracted considerable attention. However, compared to pristine NPs, environmental factors such as ultraviolet (UV) irradiation that lead to changes in the toxicity of NPs have rarely been studied. We evaluated the changes in morphology and physicochemical properties of polystyrene (PS) NPs before and after UV irradiation, and compared their hepatotoxicity in mice. The results showed that UV irradiation caused particle size reduction and increased the carbonyl index (CI) and negative charge on the particle surface. UV-aged PS NPs (aPS NPs) could induce the generation of hydroxyl radicals (·OH), but also further promoted the generation of ·OH in the Fenton reaction system. Hepatic pathological damage was more severe in mice exposed to aPS NPs, accompanied by a large number of vacuoles and hepatocyte balloon-like changes and more marked perturbations in blood glucose and serum lipoprotein, alanine aminotransferase and aspartate aminotransferase levels. In addition, exposure to PS NPs and aPS NPs, especially aPS NPs, triggered oxidative stress and significantly damaged the antioxidant capacity of mice liver. Compared with PS NPs, exposure to aPS NPs increased the number of altered metabolites in hepatic and corresponding metabolic pathways, especially glutathione metabolism. Our research suggests that UV irradiation can disrupt the redox balance in organisms by promoting the production of ·OH, enhancing PS NPs-induced liver damage and metabolic disorders. This study will help us understand the health risks of NPs and to avoid underestimation of the risks of NPs in nature.

The impact of water pollution on the health of older people

Water pollution exerts a negative impact on the health of both women and men, inducing hormonal changes, accelerating aging, and consequently leading to the premature onset of age-related health problems. Water pollutants can in general be classified as chemical (both organic and inorganic), physical, and biological agents. Certain chemical pollutants have been found to disrupt hormonal balance by blocking, mimicking, or disrupting functions within the intricate homeostasis of the human body. Moreover, certain water pollutants, including specific pesticides and industrial chemicals, have been associated with neurological and psychiatric disorders, such as mood swings, depression, cognitive decline, and anxiety, impacting both women and men. Water pollution is also associated with physical ailments, such as diarrhea, skin diseases, malnutrition, and cancer. Exposure to specific pollutants may promote premature menopause and vasomotor symptoms, elevate the risk of cardiovascular disease, and reduce bone density. In men, exposure to water pollution has been shown to reduce LH, FSH, and testosterone serum levels. The oxidative stress induced by pollutants prompts apoptosis of Sertoli and germ cells, inhibiting spermatogenesis and altering the normal morphology and concentration of sperm. Environmental estrogens further contribute to reduced sperm counts, reproductive system disruptions, and the feminization of male traits. Studies affirm that men generally exhibit a lower susceptibility than women to hormonal changes and health issues attributed to water pollutants. This discrepancy may be attributed to the varied water-related activities which have traditionally been undertaken by women, as well as differences in immune responses between genders. The implementation of effective measures to control water pollution and interventions aimed at safeguarding and enhancing the well-being of the aging population is imperative. The improvement of drinking water quality has emerged as a potential public health effort with the capacity to curtail the onset of cognitive impairment and dementia in an aging population.

Transforming pollution into solutions: A bibliometric analysis and sustainable strategies for reducing indoor microplastics while converting to value-added products

Microplastics (MPs), as emerging indoor contaminants, have garnered attention due to their ubiquity and unresolved implications for human health. These tiny particles have permeated indoor air and water, leading to inevitable human exposure. Preliminary evidence suggests MP exposure could be linked to respiratory, gastrointestinal, and potentially other health issues, yet the full scope of their effects remains unclear. To map the overall landscape of this research field, a bibliometric analysis based on research articles retrieved from the Web of Science database was conducted. The study synthesizes the current state of knowledge and spotlights the innovative mitigation strategies proposed to curb indoor MP pollution. These strategies involve minimizing the MP emission from source, advancements in filtration technology, aimed at reducing the MP exposure. Furthermore, this research sheds light on cutting-edge methods for converting MP waste into value-added products. These innovative approaches not only promise to alleviate environmental burdens but also contribute to a more sustainable and circular economy by transforming waste into resources such as biofuels, construction materials, and batteries. Despite these strides, this study acknowledges the ongoing challenges, including the need for more efficient removal technologies and a deeper understanding of MPs' health impacts. Looking forward, the study underscores the necessity for further research to fill these knowledge gaps, particularly in the areas of long-term health outcomes and the development of standardized, reliable methodologies for MP detection and quantification in indoor settings. This comprehensive approach paves the way for future exploration and the development of robust solutions to the complex issue of microplastic pollution.

Toxicological review of micro- and nano-plastics in aquatic environments: Risks to ecosystems, food web dynamics and human health

The increase of micro- and nano-plastics (MNPs) in aquatic environments has become a significant concern due to their potential toxicological effects on ecosystems, food web dynamics, and human health. These plastic particles emerge from a range of sources, such as the breakdown of larger plastic waste, consumer products, and industrial outputs. This review provides a detailed report of the transmission and dangers of MNPs in aquatic ecosystems, environmental behavior, and interactions within aquatic food webs, emphasizing their toxic impact on marine life. It explores the relationship between particle size and toxicity, their distribution in different tissues, and the process of trophic transfer through the food web. MNPs, once consumed, can be found in various organs, including the digestive system, gills, and liver. Their consumption by lower trophic level organisms facilitates their progression up the food chain, potentially leading to bioaccumulation and biomagnification, thereby posing substantial risks to the health, reproduction, and behavior of aquatic species. This work also explores how MNPs, through their persistence and bioaccumulation, pose risks to aquatic biodiversity and disrupt trophic relationships. The review also addresses the implications of MNPs for human health, particularly through the consumption of contaminated seafood, highlighting the direct and indirect pathways through which humans are exposed to these pollutants. Furthermore, the review highlights the recommendations for future research directions, emphasizing the integration of ecological, toxicological, and human health studies to inform risk assessments and develop mitigation strategies to address the global challenge of plastic pollution in aquatic environments.

Extraction and characterization of novel fibers from Tecoma stans Linn bark for use as reinforcement in polymer composites

Embarking on a pioneering investigation, this study unravels the extraordinary qualities of Tecoma stans Fibers (TSFs), freshly harvested from the rachis, establishing them as prospective reinforcements for biocomposites. Delving into their intricate characteristics, TSFs exhibit a unique fusion of physical resilience, with a density of 1.81 ± 0.39 g/cc and a diameter of 234.12 ± 7.63 μm. Complementing their physical prowess, their chemical composition boasts a harmonious blend of cellulose (70.1 ± 9.06 wt%), hemicellulose (13.56 ± 4.29 wt%), lignin (7.62 ± 2.39 wt%), moisture (4.21 ± 1.56 wt%), wax (2.37 ± 0.63 wt%), and ash (1.25 ± 0.36 wt%). In the realm of mechanical strength, TSFs showcase an impressive tensile strength of 639 ± 18.47 MPa, coupled with a robust strain at failure of 1.75 ± 0.13 % and a Young Modulus of 36.51 ± 1.96 GPa. Unveiling their crystalline intricacies, these fibers reveal a microfibril angle of 14.66 ± 0.15°, a crystalline index (CI) of 63.83 %, and a crystallite size (CS) of 9.27 nm. Beyond their mechanical marvels, TSFs exhibit unwavering thermal stability, enduring temperatures up to 297.36 °C, with a Tmax reaching an impressive 392.09 °C.

Co-exposure to PVC microplastics and cadmium induces oxidative stress and fibrosis in duck pancreas

PVC microplastics (PVC-MPs) are environmental pollutants that interact with cadmium (Cd) to exert various biological effects. Ducks belong to the waterfowl family of birds and therefore are at a higher risk of exposure to PVC-MPs and Cd than other animals. However, the effects of co-exposure of ducks to Cd and PVC-MPs are poorly understood. Here, we used Muscovy ducks to establish an in vivo model to explore the effects of co-exposure to 1 mg/L PVC-MPs and 50 mg/kg Cd on duck pancreas. After 2 months of treatment with 50 mg/kg Cd, pancreas weight decreased by 21 %, and the content of amylase and lipase increased by 25 % and 233 %. However, exposure to PVC-MPs did not significantly affect the pancreas. Moreover, co-exposure to PVC-MPs and Cd worsened the reduction of pancreas weight and disruption of pancreas function compared to exposure to either substance alone. Furthermore, our research has revealed that exposure to PVC-MPs or Cd disrupted mitochondrial structure, reduced ATP levels by 10 % and 18 %, inhibited antioxidant enzyme activity, and increased malondialdehyde levels by 153.8 % and 232.5 %. It was found that exposure to either PVC-MPs or Cd can induce inflammation and fibrosis in the duck pancreas. Notably, co-exposure to PVC-MPs and Cd exacerbated inflammation and fibrosis, with the content of IL-1, IL-6, and TNF-α increasing by 169 %, 199 %, and 98 %, compared to Cd exposure alone. The study emphasizes the significance of comprehending the potential hazards linked to exposure to these substances. In conclusion, it presents promising preliminary evidence that PVC-MPs accumulate in duck pancreas, and increase the accumulation of Cd. Co-exposure to PVC-MPs and Cd disrupts the structure and function of mitochondria and promotes the development of pancreas inflammation and fibrosis.

A systematic review of microplastics emissions in kitchens: Understanding the links with diseases in daily life

The intensification of microplastics (MPs) pollution has emerged as a formidable environmental challenge, with profound global implications. The pervasive presence of MPs across a multitude of environmental mediums, such as the atmosphere, soil, and oceans, extends to commonplace items, culminating in widespread human ingestion and accumulation via channels like food, water, and air. In the domestic realm, kitchens have become significant epicenters for MPs pollution. A plethora of kitchen utensils, encompassing coated non-stick pans, plastic cutting boards, and disposable utensils, are known to release substantial quantities of MPs particles in everyday use, which can then be ingested alongside food. This paper conducts a thorough examination of contemporary research addressing the release of MPs from kitchen utensils during usage and focuses on the health risks associated with MPs ingestion, as well as the myriad factors influencing the release of MPs in kitchen utensils. Leveraging the insights derived from this analysis, this paper proposes a series of strategic recommendations and measures targeted at mitigating the production of MPs in kitchen settings. These initiatives are designed not solely to diminish the release of MPs but also to enhance public awareness regarding this pressing environmental concern. By adopting more informed practices in kitchens, we can significantly contribute to the reduction of the environmental burden of MPs pollution, thus safeguarding both human health and the ecological system.

Cytotoxicity of amine-modified polystyrene MPs and NPs on neural stem cells cultured from mouse subventricular zone

Microplastics (MPs) and nanoplastics (NPs) are found in various environments such as aquatic, terrestrial, and aerial areas. Once ingested and inhaled, these tiny plastic debris damaged the digestive and respiratory organ systems in animals. In humans, the possible connection between MPs and various diseases such as lung diseases has been raised. Yet, the impact of MPs on the human nervous system has been unclear. Previous research using animals and cultured cells showed possible neurotoxicity of MPs and NPs. In this study, we used neural stem cells cultured from mouse subventricular zone to examine the effects of polystyrene (PS) NPs and MPs with sizes of 0.1 μm, 1 μm, and 2 μm on the cell proliferation and differentiation. We observed that only positively charged NPs and MPs, but not negatively charged ones, decreased cell viability and proliferation. These amine-modified NPs and MPs decreased both neurogenesis and oligodendrogenesis. Finally, fully differentiated neurons and oligodendrocytes were damaged and removed by the application of NPs and MPs. All these effects varied among different sizes of NPs and MPs, with the greatest effects from 1 μm and the least effects from 2 μm. These results clearly demonstrate the cytotoxicity and neurotoxicity of PS-NPs and MPs.

Fate and behaviour of Microplastics (> 25µm) within the water distribution network, from water treatment works to service reservoirs and customer taps

Water treatment works have previously shown high efficiency in removing microplastics > 25 µm from raw source water. However, what is less well known is the extent to which microplastics of this size class are generated or lost within the water distribution network, particularly whether there is a greater presence in the customer tap than in the water treatment works outlet. This study focused on the presence of 21 different types of synthetic polymer particles with sizes larger than 25 µm examined through multiple rounds of sampling at outlets of water treatment works (WTW), service reservoirs (SR), and customer taps (CT) managed by seven different water companies in Britain. Nineteen different types of polymers were detected; their signature and concentration varied based on the round of sampling, the location within the water supply network, and the water company responsible for managing the supply. Among the polymers examined, polyamide (PA), polyethene terephthalate (PET), polypropylene (PP), and polystyrene (PS) were the most commonly found. Apart from PET having its highest concentration of 0.0189 microplastic per litre (MP/L) in the SR, the concentrations of the other three most frequent polymers (PS = 0.017 MP/L, PA = 0.0752 MP/L, PP= 0.1513 MP/L) were highest in the CT. The overall prevalence of this size of microplastics in the network is low, but there was a high variability of polymer types and occurrences. These spatial and temporal variations suggested that the MP in the distribution network may exist as a series of pulses. Given the presence and polymer types, the potential for some of the microplastics to originate from materials used in the water network and domestic plumbing systems cannot be ruled out. As found before, the absolute number of microplastics in the water distribution network remained extremely low.

The triple exposure nexus of microplastic particles, plastic-associated chemicals, and environmental pollutants from a human health perspective

The presence of microplastics (MPs) is increasing at a dramatic rate globally, posing risks for exposure and subsequent potential adverse effects on human health. Apart from being physical objects, MP particles contain thousands of plastic-associated chemicals (i.e., monomers, chemical additives, and non-intentionally added substances) captured within the polymer matrix. These chemicals are often migrating from MPs and can be found in various environmental matrices and human food chains; increasing the risks for exposure and health effects. In addition to the physical and chemical attributes of MPs, plastic surfaces effectively bind exogenous chemicals, including environmental pollutants (e.g., heavy metals, persistent organic pollutants). Therefore, MPs can act as vectors of environmental pollution across air, drinking water, and food, further amplifying health risks posed by MP exposure. Critically, fragmentation of plastics in the environment increases the risk for interactions with cells, increases the presence of available surfaces to leach plastic-associated chemicals, and adsorb and transfer environmental pollutants. Hence, this review proposes the so-called triple exposure nexus approach to comprehensively map existing knowledge on interconnected health effects of MP particles, plastic-associated chemicals, and environmental pollutants. Based on the available data, there is a large knowledge gap in regard to the interactions and cumulative health effects of the triple exposure nexus. Each component of the triple nexus is known to induce genotoxicity, inflammation, and endocrine disruption, but knowledge about long-term and inter-individual health effects is lacking. Furthermore, MPs are not readily excreted from organisms after ingestion and they have been found accumulated in human blood, cardiac tissue, placenta, etc. Even though the number of studies on MPs-associated health impacts is increasing rapidly, this review underscores that there is a pressing necessity to achieve an integrated assessment of MPs' effects on human health in order to address existing and future knowledge gaps.

Microbial degradation of low-density polyethylene (LDPE) and polystyrene using Bacillus cereus (OR268710) isolated from plastic-polluted tropical coastal environment

The study focused on marine bacteria, specifically Bacillus cereus, sourced from heavily polluted coastal areas in Tamil Nadu, aiming to assess their efficacy in degrading low-density polyethylene (LDPE) and polystyrene over a 42-day period. When LDPE and polystyrene films were incubated with Bacillus cereus, they exhibited maximum weight losses of 4.13 ± 0.81 % and 14.13 ± 2.41 %, respectively. Notably, polystyrene exhibited a higher reduction rate (0.0036 day-1) and a shorter half-life (195.29 days). SEM images of the treated LDPE and polystyrene unveiled surface erosion with cracks. The energy dispersive X-ray (EDX) analysis revealed elevated carbon content and the presence of oxygen in the treated LDPE and polystyrene films. The ATR-FTIR spectra exhibited distinctive peaks corresponding to functional groups, with observable peak shifts in the treated films. Notable increases were detected in carbonyl, internal double bond, and vinyl indices across all treated groups. Additionally, both treated LDPE and polystyrene showed reduced crystallinity. This research sheds light on Bacillus cereus (OR268710) biodegradation capabilities, emphasizing its potential for eco-friendly waste management in coastal regions.

In vitro cell-transforming potential of secondary polyethylene terephthalate and polylactic acid nanoplastics

Continuous exposure to plastic pollutants may have serious consequences on human health. However, most toxicity assessments focus on non-environmentally relevant particles and rarely investigate long-term effects such as cancer induction. The present study assessed the carcinogenic potential of two secondary nanoplastics: polyethylene terephthalate (PET) particles generated from plastic bottles, and a biodegradable polylactic acid material, as respective examples of environmentally existing particles and new bioplastics. Pristine polystyrene nanoplastics were also included for comparison. A broad concentration range (6.25-200 μg/mL) of each nanoplastic was tested in both the initiation and promotion conditions of the regulatory assessment-accepted in vitro Bhas 42 cell transformation assay. Parallel cultures allowed confirmation of the efficient cellular internalisation of the three nanoplastics. Cell growth was enhanced by polystyrene in the initiation assay, and by PET in both conditions. Moreover, the number of transformed foci was significantly increased only by the highest PET concentration in the promotion assay, which also showed dose-dependency, indicating that nano PET can act as a non-genotoxic tumour promotor. Together, these findings support the carcinogenic risk assessment of nanoplastics and raise concerns regarding whether real-life co-exposure of PET nanoplastics and other environmental pollutants may result in synergistic transformation capacities.

Harmful effects of true-to-life nanoplastics derived from PET water bottles in human alveolar macrophages

The increasing presence of secondary micro/nanoplastics (MNPLs) in the environment requires knowing if they represent a real health concern. To such end, an important point is to test representative MNPLs such as the denominated true-to-life MNPLs, resulting from the degradation of plastic goods in lab conditions. In this study, we have used polyethylene terephthalate (PET) NPLs resulting from the degradation of PET water bottles. Since inhalation is an important exposure route to environmental MNPLS, we have used mouse alveolar macrophages (MH-S) as a target cell, and the study focused only on the cells that have internalized them. This type of approach is novel as it may capture the realistic adverse effects of PETNPLs only in the internalized cells, thereby mitigating any biases while assessing the risk of these MNPLs. Furthermore, the study utilized a set of biomarkers including intracellular reactive oxygen species (ROS) levels, variations on the mitochondrial membrane potential values, and the macrophage polarization to M1 (pro-inflammatory response) and M2 (anti-proinflammatory response) as possible cellular effects due to PETNPLs in only the cells that internalized PETNPLs. After exposures lasting for 3 and 24 h to a range of concentrations (0, 25, 50, and 100 μg/mL) the results indicate that no toxicity was induced despite the 100% internalization observed at the highest concentration. Significant intracellular levels of ROS were observed, mainly at exposures lasting for 24 h, in an indirect concentration-effect relationship. Interestingly, a reduction in the mitochondrial membrane potential was observed, but only at exposures lasting for 24 h, but without a clear concentration-effect relationship. Finally, PETNPL exposure shows a significant polarization from M0 to M1 and M2 subtypes. Polarization to M1 (pro-inflammatory stage) was more marked and occurred at both exposure times. Polarization to M2 (anti-inflammatory stage) was only observed after exposures lasting for 24 h. Due to the relevance of the described biomarkers, our results underscore the need for further research, to better understand the health implications associated with MNPL exposure.

Convenient Size Analysis of Nanoplastics on a Microelectrode

Chemical recycling is a promising approach to reduce plastic pollution. Timely and accurate size analysis of produced nanoplastics is necessary to monitor the process and assess the quality of chemical recycling. In this work, a sandwich-type microelectrode sensor was developed for the size assessment of nanoplastics. β-Mercaptoethylamine was modified on the microelectrode to enhance its surface positive charge density. Polystyrene (PS) nanoplastics were captured on the sensor through electrostatic interactions. Ferrocene was used as an electrochemical beacon and attached to PS via hydrophobic interactions. The results show a nonlinear dependence of the sensor's current response on the PS particle size. The size resolving ability of the microelectrode is mainly attributed to the small size of the electrode and the resulting attenuation of the electric field strength. For mixed samples with different particle sizes, this method can provide accurate average particle sizes. Through an effective pretreatment process, the method can be applied to PS nanoplastics with different surface properties, ensuring its application in evaluating different chemical recycling methods.

Micro(nano)plastics: invisible compounds with a visible impact

The plastic related research has been an epicentre in recent times. The presence and spread of micro (nano) plastics (MNPs) are well-known in the terrestrial and aquatic environment. However, the focus on the fate and remediation of MNP in soil and groundwater is limited. The fate and bioaccumulation of ingested MNPs remain unknown within the digestive tract of animals. There is also a significant knowledge gap in understanding the ubiquitous organic environmental pollutants with MNPs in biological systems. Reducing plastic consumption, improving waste management practices, and developing environmentally friendly alternatives are some of the key steps needed to address MNP pollution. For better handling and to protect the environment from these invisible substances, policymakers and researchers urgently need to monitor and map MNP contamination in soil and groundwater.

Corals-inspired magnetic absorbents for fast and efficient removal of microplastics in various water sources

Microplastics (MPs) as the formidable pollutants with high toxicity and difficult degradation may threaten the aquaculture industry and human health, making it highly necessary to develop the effective removal methods. In this article, Fe3O4 nanoparticles (NPs) were initially fabricated with mesoporous structure, but showing undesirable adsorption efficiencies for the adsorption of MPs (lower than 70%). Inspired by the reefs-rebuilding corals acting as the sinks for various marine pollutants like plastic, Fe3O4 NPs were coated further with adhesive polymerized dopamine (PDA) yielding Fe3O4@PDA absorbents. Unexpectedly, it was discovered that the corals-mimicking absorbents so formed could allow for the removal of MPs with dramatically enhanced efficiencies up to 98.5%, which is over about 30% higher than those of bare Fe3O4 NPs. Herein, the PDA shells might conduct the increased adhesion to MPs, presumably through the formation of hydrogen bonding, π-π stacking, and hydrophobic interactions. A fast (within 20 min) and stable adsorption of MPs can also be expected, in addition to the PDA-improved environmental storage of Fe3O4 NPs. Subsequently, the Fe3O4@PDA adsorbents were utilized to remove MPs from different water sources with high efficiencies, including pure water, suburban streams, village rivers, lake water, inner-city moats, and aquaculture water. Such a magnet-recyclable adsorbent may provide a new way for rapid, effective, and low-cost removal of MPs pollutants from various water systems.

Evaluating the potential of daily intake of polystyrene microplastics via drinking water in inducing PCOS and its ovarian fibrosis progression using female zebrafish

Polystyrene microplastics, extensively considered endocrine disrupting chemicals, disturb the reproductive system of living organisms. Polycystic ovary syndrome (PCOS), the reproductive endocrinopathy, is longstanding concern due to its eternal impacts as reproductive disorder and infertility. Despite several reports in reproductive and endocrine toxicity, there is inadequate literature regarding the daily intake of polystyrene-microplastics via drinking water in causing PCOS and leading to ovarian fibrosis in long-term. The present study investigated whether daily consumption of polystyrene-microplastics at doses equivalent to human exposure can cause PCOS and progress to ovarian fibrosis, using female zebrafish as model. Resembling letrozole-PCOS zebrafish model, daily intake of polystyrene-microplastics displayed hallmark PCOS pathophysiology; like excess body weight and %Gonadosomatic index, decreased Follicle Stimulating Hormone and β-estradiol, increased Luteinising Hormone, brain and ovarian Testosterone (39.3% and 75% respectively). Correspondingly, ovarian histology revealed more developing (stage I and II) oocytes and less mature oocytes alongwith cystic lesions; like follicular membrane disorganization, zona pellucida invagination, theca hypertrophy, basophilic granular accumulation and oocyte buddings. Lipid deposition in intestinal and ovarian tissues was evidenced and increased fasting blood glucose manifesting insulin resistance. The expression of PCOS biomarkers (tox3, dennd1a, fem1a) was significantly disturbed. Polystyrene microplastics played vital role in inducing PCOS further enhancing oxidative stress, which positively influences inflammation and aggravate ovarian mitophagy, shedding light on its ability to harshen PCOS into ovarian fibrosis, which is characterized by collagen deposition and upregulation of pro-fibrogenic biomarker genes. These findings illustrate the potential of daily microplastics intake via drinking water in triggering PCOS and its progression to ovarian fibrosis.

Assessment of microplastic contamination in commercially available fishes

Plastics have widespread applications for human use, but their disposal poses a significant threat to living organisms and these plastics end up in the marine environment. They will be fragmented into small pieces as a result of ultraviolet exposure, climatic changes, and temperature changes; Microplastics (MPs) are plastics that are less than 5 mm in size. The level of MP (Microplastic) pollution in commercially harvested fish from different habitant in Vellore, India is currently unknown. Therefore, this study aimed to determine the presence and characteristics of ingested or inhaled MPs in marine and freshwater fishes highly consumed by the local population. Fish gills and gastrointestinal tracts were aseptically dissected and digested (30% hydrogen peroxide), then filtered and examined under a microscope for the presence of MPs. Further analysis was performed on the samples using Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) and Scanning Electron Microscopy (SEM) with Energy Dispersive X-Ray (EDAX). Of the samples analysed, a total of 875 MPs were recovered from 32 fishes, with 478 from marine fishes and 397 from freshwater fishes. The most common colours of the MPs were blue and black, while stereo microscopy analysis revealed that the majority of MPs were fibers (91%), followed by fragments (8%) and a small number of films. The ATR-FTIR analysis identified polyvinyl alcohol (39.76%), polyethylene (16.51%), methylcellulose (12.84%) and styrene (9.07%), as the predominant types of MPs in the fish samples. This study highlights the significant impact of MP pollution on marine ecosystems. The research provides insight into the nature and extent of MPs in fish from both marine and freshwater habitats, with an aim for policies and interventions aimed to reduce plastic pollution in the locality.

Investigation of the adsorption behavior and adsorption mechanism of pollutants onto electron beam-aged microplastics

Microplastics, as an emerging pollutant, are widely distributed worldwide. Extensive research has been conducted to address the issue of microplastic pollution; however, effective methods for microplastic treatment are still lacking. This study innovatively utilizes electron beam technology to age and degrade microplastics. Compared to other treatment methods, electron beam technology can effectively promote the aging and degradation of microplastics. The Oxygen - carbon ratio of aged microplastics reached 0.071, with a mass loss of 48 % and a carbonyl index value of 0.69, making it the most effective method for short-term aging treatment in current research efforts. Theoretical calculations and experimental results demonstrate that a large number of oxygen-containing functional groups are generated on the surface of microplastics after electron beam irradiation, changing their adsorption performance for pollutants. Theoretical calculations show that an increase in oxygen-containing functional groups on the surface leads to a gradual decrease in hydrophobic pollutant adsorption capacity while increasing hydrophilic pollutant adsorption capacity for aged microplastics. Experimental studies were conducted to investigate the adsorption behavior and process of typical pollutants by aged microplastics which conform to pseudo-second-order kinetics and Henry model during the adsorption process, and the adsorption results are consistent with theoretical calculations. The results show that the degradation of microplastics is mainly due to hydroxyl radicals generated by electron beam irradiation, which can break the carbon chain of microplastics and gradually degrade them into small molecular esters and alcohols. Furthermore, studies have shown that microplastics can desorb pollutants in pure water and simulated gastric fluid. Overall, electron beam irradiation is currently the most effective method for degrading microplastics. These results also clearly elucidate the characteristics and mechanisms of the interaction between aged microplastics and organic pollutants, providing further insights for assessing microplastic pollution in real-world environments.

Genotoxic and neurotoxic potential of intracellular nanoplastics: A review

Plastic waste comprises polymers of different chemicals that disintegrate into nanoplastic particles (NPLs) of 1-100-nm size, thereby littering the environment and posing a threat to wildlife and human health. Research on NPL contamination has up to now focused on the ecotoxicology effects of the pollution rather than the health risks. This review aimed to speculate about the possible properties of carcinogenic and neurotoxic NPL as pollutants. Given their low-dimensional size and high surface size ratio, NPLs can easily penetrate biological membranes to cause functional and structural damage in cells. Once inside the cell, NPLs can interrupt the autophagy flux of cellular debris, alter proteostasis, provoke mitochondrial dysfunctions, and induce endoplasmic reticulum stress. Harmful metabolic and biological processes induced by NPLs include oxidative stress (OS), ROS generation, and pro-inflammatory reactions. Depending on the cell cycle status, NPLs may direct DNA damage, tumorigenesis, and lately carcinogenesis in tissues with high self-renewal capabilities like epithelia. In cells able to live the longest like neurons, NPLs could trigger neurodegeneration by promoting toxic proteinaceous aggregates, OS, and chronic inflammation. NPL genotoxicity and neurotoxicity are discussed based on the gathered evidence, when available, within the context of the intracellular uptake of these newcomer nanoparticles. In summary, this review explains how the risk evaluation of NPL pollution for human health may benefit from accurately monitoring NPL toxicokinetics and toxicodynamics at the intracellular resolution level.

Microplastics and Nanoplastics in Atheromas and Cardiovascular Events

BACKGROUND

Microplastics and nanoplastics (MNPs) are emerging as a potential risk factor for cardiovascular disease in preclinical studies. Direct evidence that this risk extends to humans is lacking.

METHODS

We conducted a prospective, multicenter, observational study involving patients who were undergoing carotid endarterectomy for asymptomatic carotid artery disease. The excised carotid plaque specimens were analyzed for the presence of MNPs with the use of pyrolysis-gas chromatography-mass spectrometry, stable isotope analysis, and electron microscopy. Inflammatory biomarkers were assessed with enzyme-linked immunosorbent assay and immunohistochemical assay. The primary end point was a composite of myocardial infarction, stroke, or death from any cause among patients who had evidence of MNPs in plaque as compared with patients with plaque that showed no evidence of MNPs.

RESULTS

A total of 304 patients were enrolled in the study, and 257 completed a mean (±SD) follow-up of 33.7±6.9 months. Polyethylene was detected in carotid artery plaque of 150 patients (58.4%), with a mean level of 21.7±24.5 μg per milligram of plaque; 31 patients (12.1%) also had measurable amounts of polyvinyl chloride, with a mean level of 5.2±2.4 μg per milligram of plaque. Electron microscopy revealed visible, jagged-edged foreign particles among plaque macrophages and scattered in the external debris. Radiographic examination showed that some of these particles included chlorine. Patients in whom MNPs were detected within the atheroma were at higher risk for a primary end-point event than those in whom these substances were not detected (hazard ratio, 4.53; 95% confidence interval, 2.00 to 10.27; P<0.001).

CONCLUSIONS

In this study, patients with carotid artery plaque in which MNPs were detected had a higher risk of a composite of myocardial infarction, stroke, or death from any cause at 34 months of follow-up than those in whom MNPs were not detected. (Funded by Programmi di Ricerca Scientifica di Rilevante Interesse Nazionale and others; ClinicalTrials.gov number, NCT05900947.).

Role of Microplastics in Chronic Rhinosinusitis Without Nasal Polyps

OBJECTIVE

We aimed to examine the relationship between chronic rhinosinusitis without nasal polyps and microplastics.

METHODS

A total of 80 patients participated in this prospectively planned study. The patients were divided into two groups. Group 1 had 50 patients with chronic rhinosinusitis without nasal polyps, whereas Group 2 had 30 healthy volunteers. The age and gender of the participants were noted. Nose Obstruction Symptom Evaluation questionnaire was applied to the patients. The patients performed nasal lavage with saline. Microplastics were examined in the collected nasal lavage fluids, and their numbers were noted. The groups were compared on these values.

RESULTS

The mean age was 38.06 ± 14.15 years in the chronic rhinosinusitis group without nasal polyps and 33.60 ± 11.68 years in the control group. There was no significant difference between the groups in terms of age and gender. There was a significant difference in the number of microplastics between the chronic rhinosinusitis group without nasal polyps and the control group (p < 0.001). Microplastics were detected in all participants.

CONCLUSIONS

We found more microplastics in patients with chronic rhinosinusitis without nasal polyps. According to this result, we can say that there may be a relationship between chronic rhinosinusitis and microplastics.

LEVEL OF EVIDENCE

3 Laryngoscope, 134:1077-1080, 2024.

Occurrence, influencing factors and sources of atmospheric microplastics in peri-urban farmland ecosystems of Beijing, China

Atmosphere is an important component of the microplastics (MPs) cycle. However, studies on atmospheric MPs in peri-urban farmland ecosystems are limited. Herein, the occurrence, influencing factors and geographic sources of atmospheric MPs in peri-urban farmland ecosystems have been analyzed. The average deposition flux of atmospheric MPs was found to be 167.09 ± 92.03 item·m-2·d-1. Around 68 % MPs had particle size <1000 μm, while the main colors of MPs were black (40.71 %) and blue (20.64 %). Approximately 91 % MPs were fibers, while polyethylene terephthalate (49 %) and rayon (36.93 %) were observed as the major microplastic types. The main factors influencing the atmospheric deposition of MPs were gross domestic product (GDP), population density, air pressure, and wind direction. Deposition fluxes exhibited positive correlations with GDP, population density and air pressure, and negative correlations with wind direction. Combined with the backward trajectory model, MPs were mainly found to be originated from the southeast in September and from the northwest in October-February. The study of atmospheric MPs in farmland ecosystems in peri-urban areas is important for the protection of ecological environment, prevention of human diseases and control of MPs pollution.

A global review on the abundance and threats of microplastics in soils to terrestrial ecosystem and human health

Soil is the source and sink of microplastics (MPs), which is more polluted than water and air. In this paper, the pollution levels of MPs in the agriculture, roadside, urban and landfill soils were reviewed, and the influence of MPs on soil ecosystem, including soil properties, microorganisms, animals and plants, was discussed. According to the results of in vivo and in vitro experiments, the possible risks of MPs to soil ecosystem and human health were predicted. Finally, in light of the current status of MPs research, several prospects are provided for future research directions to better evaluate the ecological risk and human health risk of MPs. MPs concentrations in global agricultural soils, roadside soils, urban soils and landfill soils had a great variance in different studies and locations. The participation of MPs has an impact on all aspects of terrestrial ecosystems. For soil properties, pH value, bulk density, pore space and evapotranspiration can be changed by MPs. For microorganisms, MPs can alter the diversity and abundance of microbiome, and different MPs have different effects on bacteria and fungi differently. For plants, MPs may interfere with their biochemical and physiological conditions and produce a wide range of toxic effects, such as inhibiting plant growth, delaying or reducing seed germination, reducing biological and fruit yield, and interfering with photosynthesis. For soil animals, MPs can affect their mobility, growth rate and reproductive capacity. At present epidemiological evidences regarding MPs exposure and negative human health effects are unavailable, but in vitro and in vivo data suggest that they pose various threats to human health, including respiratory system, digestive system, urinary system, endocrine system, nervous system, and circulation system. In conclusion, the existence and danger of MPs cannot be ignored and requires a global effort.

Cerebral neurotoxicity of amino-modified polystyrene nanoplastics in mice and the protective effects of functional food Camellia pollen

Accumulating evidence suggests that nanoplastics contribute to an increased risk of brain damage, however, the precise underlying mechanisms remain unclear. Here, we subjected mice to long-term exposure to amino-modified polystyrene nanoplastics (APS-NPs). These nanoplastics were detected in the mouse brain; coupled with the observed upregulation of Alzheimer's disease-associated genes (APP and MAPT). To further explore nanoplastic damage mechanisms and the corresponding protective strategies against these mechanisms in vitro, we used hCMEC/D3 and HT22 cells. Results showed that APS-NPs disrupted tight junction proteins (Occludin and ZO-1) via TLR2/MMP9 axis, resulting in blood-brain barrier permeation; this was significantly mitigated by functional food Camellia pollen treatment. APS-NPs initiated iNOS and nNOS upregulation within neurons resulting in Sirtuin 1 deacetylase inactivation and CBP acetyltransferase stimulation, ultimately leading to Ac-Tau formation. This process was attenuated by Camellia pollen, which also ameliorated the APS-NPs-induced neuronal apoptosis mediated by the p53/Bax/Bcl-2 axis. Network pharmacology analysis of Camellia pollen offered a further theoretical understanding of its potential applications in preventing and treating nervous system disorders, such as Alzheimer's disease. This study established that Camellia pollen protects the brain against APS-NPs-mediated blood-brain barrier damage and alleviates neuronal apoptosis and Alzheimer's disease-like neurotoxicity. This study elucidates the mechanisms underlying polystyrene-induced brain damage and can be used to inform future prevention and treatment strategies.

Micro(nano)plastics in the Human Body: Sources, Occurrences, Fates, and Health Risks

The increasing global attention on micro(nano)plastics (MNPs) is a result of their ubiquity in the water, air, soil, and biosphere, exposing humans to MNPs on a daily basis and threatening human health. However, crucial data on MNPs in the human body, including the sources, occurrences, behaviors, and health risks, are limited, which greatly impedes any systematic assessment of their impact on the human body. To further understand the effects of MNPs on the human body, we must identify existing knowledge gaps that need to be immediately addressed and provide potential solutions to these issues. Herein, we examined the current literature on the sources, occurrences, and behaviors of MNPs in the human body as well as their potential health risks. Furthermore, we identified key knowledge gaps that must be resolved to comprehensively assess the effects of MNPs on human health. Additionally, we addressed that the complexity of MNPs and the lack of efficient analytical methods are the main barriers impeding current investigations on MNPs in the human body, necessitating the development of a standard and unified analytical method. Finally, we highlighted the need for interdisciplinary studies from environmental, biological, medical, chemical, computer, and material scientists to fill these knowledge gaps and drive further research. Considering the inevitability and daily occurrence of human exposure to MNPs, more studies are urgently required to enhance our understanding of their potential negative effects on human health.

Understanding the mechanistic roles of microplastics combined with heavy metals in regulating ferroptosis: Adding new paradigms regarding the links with diseases

As a new type of pollutant, microplastics (MPs) commonly exist in today's ecosystems, causing damage to the ecological environment and the health of biological organisms, including human beings. MPs can function as carriers of heavy metals (HMs) to aggravate the enrichment of HMs in important organs of organisms, posing a great threat to health. Ferroptosis, a novel process for the regulation of nonapoptotic cell death, has been shown to be closely related to the occurrence and processes of MPs and HMs in diseases. In recent years, some HMs, such as cadmium (Cd), iron (Fe), arsenic (As) and copper (Cu), have been proven to induce ferroptosis. MPs can function as carriers of HMs to aggravate damage to the body. This damage involves oxidative stress, mitochondrial dysfunction, lipid peroxidation (LPO), inflammation, endoplasmic reticulum stress (ERS) and so on. Therefore, ferroptosis has great potential as a therapeutic target for diseases induced by MPs combined with HMs. This paper systematically reviews the potential effects and regulatory mechanisms of MPs and HMs in the process of ferroptosis, focusing on the mitochondrial damage, Fe accumulation, LPO, ERS and inflammation caused by MPs and HMs that affect the regulatory mechanism of ferroptosis, providing new insights for research on regulating drugs and for the development of ferroptosis-targeting therapy for Alzheimer's disease, Parkinson's disease, cancer and cardiovascular disease.

Microplastics in the Asia-Pacific Region in the Plasticene Era: Exposures and Health Risks

Within the broader Anthropocene Epoch resides the Plasticene Era, where humans are subjected pervasively to nano- and microplastics (NMPs). Human's widespread exposure with NMPs occurs through the air we breathe, water we drink, and food we eat. NMP sources are wide and varied; atmospheric NMPs are largely attributed to fibres from car tyres and synthetic clothing, while particles from food packaging, personal care products, and plastic manufacturing contribute significantly to food and water contamination. NMPs have become inherent within the human body and have been found in every organ. As such, the evidence base around adverse health effects is fragmented but growing. This article presents a mini-review and report of sessions presented about NMPs at the 19th International Conference of the Pacific Basin Consortium for Environment and Health, held on Jeju Island, in 2022. Abundant evidence of substantial exposure to NMPs in the Asia-Pacific region has been exhibited. Addressing this issue necessitates the collaboration of policymakers, manufacturers, and researchers to develop safer alternatives and implement mitigation and remediation strategies. The ongoing development of a new United Nations-led global plastic treaty presents a crucial opportunity that must be acted on and not be compromised.

Occurrence and characteristics of microplastics pollution in tropical agricultural soils in Klang Valley, Malaysia

Presently, microplastic pollution has emerged as a growing environmental risk around the world. Nevertheless, knowledge of the occurrence and characteristics of microplastics in tropical agricultural soil is limited. This study investigated the pollution of surface soil microplastics in two agricultural farms located at Klang Valley, Malaysia. An extraction method based on density separation by using saturated extraction solution (sodium sulfate, ρ = 2 g cm-3 and sucrose, ρ = 1.59 g cm-3 with a ratio 1:1, v/v) was carried out. The study revealed the mean particle size of soil microplastics with 3260.76 ± 880.38 μm in farm A and 2822.31 ± 408.48 μm in farm B. The dominant types of soil microplastics were fragments and films with major colors of white (59%) and transparent (28%) in farm A, while black (52%) and white (37.6%) in farm B. Representatives of soil microplastics detected polymers of polyvinyl chloride (PVC), high density polyethylene (HDPE), polycarbonate (PC), and polystyrene (PS). The sources of plastic products were black and white plastic pipes, black plastic films for vegetation, fertilizer bottles, plastic water containers and polystyrene storage boxes, and the breakdown processes, contributed to the microplastic pollution in these farms. The outcomes of this study will establish a better understanding of microplastic pollution in tropical agricultural soil in the Southeast Asian region. The findings would be beneficial as supportive reference for the endeavor to reduce microplastic pollution in agricultural soil.

Emerging Contaminants: An Emerging Risk Factor for Diabetes Mellitus

Emerging contaminants have been increasingly recognized as critical determinants in global public health outcomes. However, the intricate relationship between these contaminants and glucose metabolism remains to be fully elucidated. The paucity of comprehensive clinical data, coupled with the need for in-depth mechanistic investigations, underscores the urgency to decipher the precise molecular and cellular pathways through which these contaminants potentially mediate the initiation and progression of diabetes mellitus. A profound understanding of the epidemiological impact of these emerging contaminants, as well as the elucidation of the underlying mechanistic pathways, is indispensable for the formulation of evidence-based policy and preventive interventions. This review systematically aggregates contemporary findings from epidemiological investigations and delves into the mechanistic correlates that tether exposure to emerging contaminants, including endocrine disruptors, perfluorinated compounds, microplastics, and antibiotics, to glycemic dysregulation. A nuanced exploration is undertaken focusing on potential dietary sources and the consequential role of the gut microbiome in their toxic effects. This review endeavors to provide a foundational reference for future investigations into the complex interplay between emerging contaminants and diabetes mellitus.

Single-cell RNA-seq analysis decodes the kidney microenvironment induced by polystyrene microplastics in mice receiving a high-fat diet

In recent years, the environmental health issue of microplastics has aroused an increasingly significant concern. Some studies suggested that exposure to polystyrene microplastics (PS-MPs) may lead to renal inflammation and oxidative stress in animals. However, little is known about the essential effects of PS-MPs with high-fat diet (HFD) on renal development and microenvironment. In this study, we provided the single-cell transcriptomic landscape of the kidney microenvironment induced by PS-MPs and HFD in mouse models by unbiased single-cell RNA sequencing (scRNA-seq). The kidney injury cell atlases in mice were evaluated after continued PS-MPs exposure, or HFD treated for 35 days. Results showed that PS-MPs plus HFD treatment aggravated the kidney injury and profibrotic microenvironment, reshaping mouse kidney cellular components. First, we found that PS-MPs plus HFD treatment acted on extracellular matrix organization of renal epithelial cells, specifically the proximal and distal convoluted tubule cells, to inhibit renal development and induce ROS-driven carcinogenesis. Second, PS-MPs plus HFD treatment induced activated PI3K-Akt, MAPK, and IL-17 signaling pathways in endothelial cells. Besides, PS-MPs plus HFD treatment markedly increased the proportions of CD8+ effector T cells and proliferating T cells. Notably, mononuclear phagocytes exhibited substantial remodeling and enriched in oxidative phosphorylation and chemical carcinogenesis pathways after PS-MPs plus HFD treatment, typified by alterations tissue-resident M2-like PF4+ macrophages. Multispectral immunofluorescence and immunohistochemistry identified PF4+ macrophages in clear cell renal cell carcinoma (ccRCC) and adjacent normal tissues, indicating that activate PF4+ macrophages might regulate the profibrotic and pro-tumorigenic microenvironment after renal injury. In conclusion, this study first systematically revealed molecular variation of renal cells and immune cells in mice kidney microenvironment induced by PS-MPs and HFD with the scRNA-seq approach, which provided a molecular basis for decoding the effects of PS-MPs on genitourinary injury and understanding their potential profibrotic and carcinogenesis in mammals.

Risks Associated with the Presence of Polyvinyl Chloride in the Environment and Methods for Its Disposal and Utilization

Plastics have recently become an indispensable part of everyone's daily life due to their versatility, durability, light weight, and low production costs. The increasing production and use of plastics poses great environmental problems due to their incomplete utilization, a very long period of biodegradation, and a negative impact on living organisms. Decomposing plastics lead to the formation of microplastics, which accumulate in the environment and living organisms, becoming part of the food chain. The contamination of soils and water with poly(vinyl chloride) (PVC) seriously threatens ecosystems around the world. Their durability and low weight make microplastic particles easily transported through water or air, ending up in the soil. Thus, the problem of microplastic pollution affects the entire ecosystem. Since microplastics are commonly found in both drinking and bottled water, humans are also exposed to their harmful effects. Because of existing risks associated with the PVC microplastic contamination of the ecosystem, intensive research is underway to develop methods to clean and remove it from the environment. The pollution of the environment with plastic, and especially microplastic, results in the reduction of both water and soil resources used for agricultural and utility purposes. This review provides an overview of PVC's environmental impact and its disposal options.

Microplastic pollution: Understanding microbial degradation and strategies for pollutant reduction

Microplastics are ubiquitous environmental pollutants with the potential for adverse impacts on ecosystems and human health. These particles originate from the fragmentation of larger plastic items, shedding from synthetic fibers, tire abrasions, and direct release from personal care products and industrial processes. Once released into the environment, microplastics can disrupt ecosystems, accumulate in organisms, cause physical harm, and carry chemical pollutants that pose risks to both wildlife and human health. There is an urgent need to comprehensively explore the multifaceted issue of microplastic pollution and understand microbial degradation to reduce environmental pollution caused by microplastics. This paper presents a comprehensive exploration of microplastics, including their types, composition, advantages, and disadvantages, as well as the journey and evolution of microplastic pollution. The impact of microplastics on the microbiome and microbial communities is elucidated, highlighting the intricate interactions between microplastics and microbial ecosystems. Furthermore, the microbial degradation of microplastics is discussed, including the identification, characterization, and culturing methods of microplastic-degrading microorganisms. Mechanisms of microplastic degradation and the involvement of microbial enzymes are elucidated to shed light on potential biotechnological applications. Strategies for reducing microplastic pollution are presented, encompassing policy recommendations and the importance of enhanced waste management practices. Finally, the paper addresses future challenges and prospects in the field, emphasizing the need for international collaboration, research advancements, and public engagement. Overall, this study underscores the urgent need for concerted efforts to mitigate microplastic pollution and offers valuable insights for researchers, policymakers, and stakeholders involved in environmental preservation.

Plastic pollution from takeaway food industry in China

China's takeaway food industry is growing rapidly, and bringing unprecedented demand for plastic packaging, which results in serious plastic pollution and increasing emissions of plasticizers of phthalate esters (PAEs) and greenhouse gases (GHGs). This study assesses the current and future situation of plastic usage for takeaway food packaging in China, and also analyzes the PAEs and GHG emissions brought by these plastics under different scenarios. From 2010 to 2020, the plastic usage grew from 2.92 to 101 × 104 tons, and brought 112-3845 kg PAEs and 43.6-1438 kt CO2e GHG emissions. Their distribution exhibited a clear 'two-line' pattern: higher features mostly located in Beijing-Guangzhou and Beijing-Shanghai railways. The socio-economic factors model performed better than the growth rate model for plastic usage prediction from 2021 to 2060. It is predicted that 40.6 Mt. plastic would be consumed in 2060, and they will bring 155 tons PAEs and 37.0 Mt. CO2e GHGs. At that time, biodegradable plastic replaced or plastic cycling cannot significantly contribute to national carbon reduction, unless using a temperature change of 2 °C scenario. Our work improves the understanding of PAEs and GHG emission from plastic pollution, and provides insight into long-term dynamics in the plastics management of takeaway food industry.

Advances in optical and electrochemical sensing of bisphenol a (BPA) utilizing microfluidic Technology: A mini perspective

Continuous exposure to toxic pollutants highlights the need for sensitive detection technologies that can be rapidly applied in the current world for quick screening of real samples. Bisphenol A (BPA) is one of the most common environmental contaminants, and it has the potential to harm both the environment and human health, notably causing reproductive disorders, cancer, heart disease, infertility, mental disorders, etc. Thus, significant attention has been paid to the detection of BPA and microplastics to promote food safety, environmental health, and human health on a sustainable earth. Among the current technologies, microfluidic based systems have garnered a lot of interest as future diagnostic tools for healthcare applications. Microfluidic devices can be deployed for quick screening and real-time monitoring, with inherent advantages like portability, miniaturisation, highly sensing tool and ease of integration with various detection systems. Optical and electrochemical sensors are two major analytical tools found in almost all microfluidic-based devices for ultrasensitive BPA and microplastics determination. In this review, we have evaluated and discussed microfluidic-based detection methods for BPA and microplastics.

Biodegradable Poly(butylene succinate) Laminate with Nanocellulose Interphase Layer for High-Barrier Packaging Film Application

In response to rising concerns over the environmental and human health ramifications of polymers derived from petroleum, particularly in the food packaging industry, research has pivoted towards more sustainable materials. Poly(butylene succinate) (PBS), selected as the polymer matrix, stands out as one of the most promising bio-based and biodegradable polymers suitable for film blowing and lamination. A layered spray-coating technique was employed to apply 1, 5, 10, and 20 layers of nanofibrillated cellulose (NFC) between blown PBS films, creating a three-layer laminate structure. NFC sourced from minimally processed hemp stalk waste highlights the potential for minimizing environmental impact. The water vapor transmission rate (WVTR) of these films, a critical parameter for food packaging, was assessed in a controlled environment at 38 °C and 90% relative humidity over a period of two months. The integration of a single NFC layer, constituting 0.35% of the composite's weight, was observed to significantly reduce the WVTR by up to 5.5-fold. It was noted that higher NFC layer counts above 10 reduced the adhesion within the laminate layers. Morphological assessments showed that the number of structural defects increased with a higher count of NFC layers. As the count of NFC layers increased, the optical transparency of the laminates dropped from approximately 65% to 25% in the visible light spectrum. Notably, by weight percent, NFC proved to be an effective barrier even without chemical modification. The developed laminates stand out as a viable, green option for food packaging, offering a sustainable and renewable solution.

Marine plastics, circular economy, and artificial intelligence: A comprehensive review of challenges, solutions, and policies

Global plastic production is rapidly increasing, resulting in significant amounts of plastic entering the marine environment. This makes marine litter one of the most critical environmental concerns. Determining the effects of this waste on marine animals, particularly endangered organisms, and the health of the oceans is now one of the top environmental priorities. This article reviews the sources of plastic production, its entry into the oceans and the food chain, the potential threat to aquatic animals and humans, the challenges of plastic waste in the oceans, the existing laws and regulations in this field, and strategies. Using conceptual models, this study looks at a circular economy framework for energy recovery from ocean plastic wastes. It does this by drawing on debates about AI-based systems for smart management. In the last sections of the present research, a novel soft sensor is designed for the prediction of accumulated ocean plastic waste based on social development features and the application of machine learning computations. Plus, the best scenario of ocean plastic waste management with a concentration on both energy consumption and greenhouse gas emissions is discussed using USEPA-WARM modeling. Finally, a circular economy concept and ocean plastic waste management policies are modeled based on the strategies of different countries. We deal with green chemistry and the replacement of plastics derived from fossil sources.

Sodium nitroprusside alleviates nanoplastics-induced developmental toxicity by suppressing apoptosis, ferroptosis and inflammation

The health damage caused by nanoplastics (NPs) pollution has become one of the global scientific problems to be solved urgently. However, the toxicological mechanism of NPs is complex, and the research progress of anti-toxicity is limited. Thus, it has potential application value to explore or develop drugs that can effectively alleviate or remove NPs with biological toxicity. In this research, 8 μM sodium nitroprusside (SNP) solution was used to treat zebrafish larvae with 20 mg/L NPs for up to 12 days, and the results showed that SNP treatments were effective in alleviating NPs-caused developmental toxicity in zebrafish larvae. Further examination of its signaling pathway revealed that NPs-induced oxidative stress was mitigated by activating the NO-sGC-cGMP signaling pathway and reduced most of the reactive oxygen species (ROS). Subsequently, we detected the key substances and the key enzymes involved in apoptosis and ferroptosis, and found that oxidative stress-induced mitochondria-dependent apoptosis and lipid peroxidation-caused ferroptosis were alleviated. Finally, observed the accumulation of NPs and ROS in the liver of zebrafish larvae, which is the target organ of immunotoxicity, and we found that SNP could alleviate NPs-caused inflammation by analyzing the fluorescence intensity of neutrophils and macrophages in transgenic zebrafish and detecting the expression of key immune genes. In conclusion, this research has shown for the first time that SNP treatment can significantly inhibit NPs-induced developmental toxicity, resulting from oxidative stress-induced apoptosis, ferroptosis and inflammation in zebrafish larvae.

Approach to an answer to "How dangerous microplastics are to the human body": A systematic review of the quantification of MPs and simultaneously exposed chemicals

This review aims to facilitate future research on microplastics (MPs) in the environment using systematic and analytical protocols, ultimately contributing to assessment of the risk to human health due to continuous daily exposure to MPs. Despite extensive studies on MP abundance in environment, identification, and treatment, their negative effects on human health remain unknown due to the lack of proof from clinical studies and limited technology on the MP identification. To assess the risk of MPs to human health, the first step is to estimate MP intake via ingestion, inhalation, and dermal contact under standardized exposure conditions in daily life. Furthermore, rather than focusing on the sole MPs, migrating chemicals from plastic products should be quantified and their health risk be assessed concurrently with MP release. The critical factors influencing MP release and simultaneously exposed chemicals (SECs) must be investigated using a standardized identification method. This review summarises release sources, factors, and possible routes of MPs from the environment to the human body, and the quantification methods used in risk assessment. We also discussed the issues encountered in MP release and SEC migration. Consequently, this review provides directions for future MP studies that can answer questions about MP toxicity to human health.

Clean water production from plastic and heavy metal contaminated waters using redox-sensitive iron nanoparticle-loaded biochar

The unceasing release of tiny plastics (microplastics and nanoplastics) and their additives, like metal ions, into the aquatic systems from industries and other sources is a globally escalating problem. Their combined toxic effects and human health hazard are already proven; hence, their remediation is requisite. This study utilised the nano-zerovalent iron-loaded sugarcane bagasse-derived biochar (nZVI-SBC) for simultaneous removal of Nanoplastics (NPs) of different functionality and size along with metal ions (Ni2+, Cd2+, AsO43-, and CrO42-). Batch and column experiments were conducted, and the results showed an efficient removal of contaminants with maximum sorption of carboxylate-modified NPs of size 500 nm (qmax = 90.3 mg/g) among all three NPs types. Significant removal was observed in Cd2+ in case of cations and CrO42- in case of anions with qmax = 44.0 and 87.8 mg/g, respectively. Kinetics and the isotherm modelling better fitted the pseudo-second-order kinetic model and Sips isotherm model, respectively for both NPs and metal ions. The designed material worked well in pH range of 4-8, ionic strength 1-20 mM and in complex aqueous matrices, with >90% removal. FTIR, zeta potential and the imaging analysis of the reaction precipitates confirmed the electrostatic attraction, pore retention and complexation as the potential mechanisms for removing NPs, whereas, XPS studies confirmed the reduction co-precipitation and surface complexation as the possible mechanism for removing metal ions. High values of attachment efficiency factor calculated from colloidal filtration theory (CFT) validated the experimental results and justified the high sorption of carboxylate modified 500 nm NPs particles. The synthesized material successfully removed both NPs of varying size and functionality and metal ions simultaneously with significant efficacy in complex environmental samples proving the broad applicability of material in realistic environmental conditions and different types of water treatment processes.

Longitudinal and vertical distribution of microplastics in various pipe scales in an operating drinking water distribution system

Microplastics (MPs) are ingested by humans through the daily consumption of drinking water. Pipe scales are recognized as important sites of MPs occurrence in the drinking water distribution system (DWDS). Despite extensive research on drinking water, no study has been conducted to investigate the distribution of MPs in pipe scales within an operational DWDS. The underground placement of DWDSs brings challenges for sampling pipe scales. In this study, 5 tap water and 16 pipe scales samples were collected from a typical DWDS. The analysis of MPs abundance in these 21 samples filled the data gap in the distribution of MPs in both pipe scales and tap water along the DWDSs. MPs were detected in all water samples (1.74-20.88 MPs/L) and pipe scales samples (0.03-3.48 MPs/cm2). In tap water, MPs abundance increased abruptly in the stagnant-slow flow region and reached the maximum value (20.88 MPs/L), even surpassing the abundance in raw water (6.42 MPs/L). In the pipe scales, MPs abundance decreased from the upstream to downstream of DWDS and was associated with the heavy metal concentration. MPs smaller than 150 µm accounted for 91.6% of the tap water (21-971 µm) and pipe scales (20-2055 µm). The abundance of MPs showed a logarithmic increase as the size decreased. The proportion of MPs fibers in tap water was lower than that in pipe scales. A total of 35 MPs polymers were detected, with 34 polymers in pipe scales and 26 polymers in tap water. In terms of abundance, polyethylene terephthalate (50.0%) was the dominant polymer in pipe scales, while polyamide (70.3%) was the dominant polymer in tap water. Regarding detection rate, polyamide was detected in all 21 samples, followed by polyurethane in 19 samples. The distribution of MPs along the longitudinal direction of the DWDS was correlated with heavy metal. While the distribution of MPs in the vertical direction of large diameter pipe scales was dependent on their sizes, and densities. The greatest abundance, size and density of MPs were detected at the bottom 120-degree.

Liquid Interfacial Coassembly of Plasmonic Arrays and Trace Hydrophobic Nanoplastics in Edible Oils for Robust Identification and Classification by Surface-Enhanced Raman Spectroscopy

The ubiquity of micro-/nanoplastics poses a visible threat to the environment, aquatic organisms, and human beings and has become a global concern. Here, we proposed a liquid interface-based strategy using surface-enhanced Raman spectroscopy to coassemble nanoplastics and gold nanoparticles into a dense and homogeneous plasmonic array, thereby enabling the rapid and sensitive detection of trace nanoplastics. In addition, due to the uniqueness of the oil-water immiscible two-phase interface, we achieved ideal results for the detection of nanoplastics in a complex matrix (e.g., aqueous environment and edible oil) with a detection limit of μg/mL. With the aid of the principal component analysis algorithm, the differentiation and identification of multiple nanoplastic components (e.g., polystyrene, polyethylene, and polyethylene terephthalate) in aqueous environments and common hazards (e.g., Bap and Phe) in edible oil were achieved. Therefore, our self-assembled plasmonic arrays are expected to be used for monitoring environmental pollution and food safety.

Biological interactions of polystyrene nanoplastics: Their cytotoxic and immunotoxic effects on the hepatic and enteric systems

As emerging pollutants in the environment, nanoplastics (NPs) can cross biological barriers and be enriched in organisms, posing a greatest threat to the health of livestock and humans. However, the size-dependent toxic effects of NPs in higher mammals remain largely unknown. To determine the size-dependent potential toxicities of NPs, we exposed mouse (AML-12) and human (L02) liver cell lines in vitro, and 6-week-old C57BL/6 mice (well-known preclinical model) in vivo to five different sizes of polystyrene NPs (PS-NPs) (20, 50, 100, 200 and 500 nm). We found that ultra-small NPs (20 nm) induced the highest cytotoxicity in mouse and human liver cell lines, causing oxidative stress and mitochondrial membrane potential loss on AML-12 cells. Unexpectedly in vivo, after long-term oral exposure to PS-NPs (75 mg/kg), medium NPs (200 nm) and large NPs (500 nm) induced significant hepatotoxicity, evidenced by increased oxidative stress, liver dysfunction, and lipid metabolism disorders. Most importantly, medium or large NPs generated local immunotoxic effects via recruiting and activating more numbers of neutrophils and monocytes in the liver or intestine, which potentially resulted in increased proinflammatory cytokine secretion and the tissue damage. The discrepancy in in vitro-in vivo toxic results might be attributed to the different properties of biodistribution and tissue accumulation of different sized NPs in vivo. Our study provides new insights regarding the hepatotoxicity and immunotoxicity of NPs on human and livestock health, warranting us to take immense measures to prevent these NPs-associated health damage.

Optimizing Moss and Lichen Transplants as Biomonitors of Airborne Anthropogenic Microfibers

Anthropogenic microfibers (mfs) are synthetic particles composed of cellulose (cotton, rayon, acetate, etc.) or petrochemical-based polymers (i.e., microplastics-MPs) that are less than 5 mm in length. The accumulation of mfs, including MPs, in the moss Hypnum cupressiforme and the lichen Pseudevernia furfuracea was compared in a transplant experiment lasting 6 weeks. We also tested the effects of the bag used for transplants on the accumulation of mfs. Anthropogenic particles trapped by both biomonitors were mostly filamentous (99% mfs), and their number was overall higher in the moss (mean ± s.d. 102 ± 24) than in the lichen (mean ± s.d. 87 ± 17), at parity of sample weight. On average, mfs found in lichen were significantly longer than those found in moss bags, suggesting that lichens are less efficient at retaining smaller mfs. Exposure without the net yielded a higher mfs number accumulation in both species, indicating that "naked" transplants provide greater sensitivity. The calculation of daily fluxes evidenced a loss of mfs in the lichen, suggesting the presence of more stable bonds between moss and mfs. Raman microspectroscopy carried out on about 100 debris confirms the anthropogenic nature of mfs, of which 20% were MPs. Overall results indicate that moss is preferable to lichen in the biomonitoring of airborne mfs especially when exposed naked.

A549 as an In Vitro Model to Evaluate the Impact of Microplastics in the Air

Airborne microplastics raise significant concerns due to their potential health impacts. Having a small size, larger surface area, and penetrative ability into the biological system, makes them hazardous to health. This review article compiles various studies investigating the mechanism of action of polystyrene micro- and nanoplastics affecting lung epithelial cells A549. These inhalable microplastics damage the respiratory system, by triggering a proinflammatory environment, genotoxicity, oxidative stress, morphological changes, and cytotoxic accumulation in A549 cells. PS-NP lung toxicity depends on various factors such as size, surface modifications, concentration, charge, and zeta potential. However, cellular uptake and cytotoxicity mechanisms depend on the cell type. For A549 cells, PS-NPs are responsible for energy imbalance by mitochondrial dysfunction, oxidative stress-mediated cytotoxicity, immunomodulation, and apoptosis. Additionally, PS-NPs have the ability to traverse the placental barrier, posing a risk to offspring. Despite the advancements, the precise mechanisms underlying how prolonged exposure to PS-NPs leads to the development and progression of lung diseases have unclear points, necessitating further investigations to unravel the root cause. This review also sheds light on data gaps, inconsistencies in PS-Nos research, and provides recommendations for further research in this field.

A critical review on nanoplastics and its future perspectives in the marine environment

Nanoplastics (plastic particles smaller than 1 μm) are the least-known type of marine litter. Nanoplastics (NPs) have attracted much interest in recent years because of their prevalence in the environment and the potential harm they can cause to living organisms. This article focuses on understanding NPs and their fate in the marine environment. Sources of NPs have been identified, including accidental release from products or through nano-fragmentation of larger plastic debris. As NPs have a high surface area, they may retain harmful compounds. The presence of harmful additives in NPs poses unique practical challenges for studies on their toxicity. In this review, several methods specifically adapted for the physical and chemical characterization of NPs have been discussed. Furthermore, the review provides an overview of the translocation and absorption of NPs into organisms, along with an evaluation of the release of potential toxins from NPs. Further, we have provided an overview about the existing methods suggested for the possible degradation of these NPs. We conclude that the hazards of NPs are plausible but unknown, necessitating a thorough examination of NPs' sources, fate, and effects to better mitigate and spread awareness about this emerging contaminant.

Impact of per- and polyfluorinated alkyl substances (PFAS) on the marine environment: Raising awareness, challenges, legislation, and mitigation approaches under the One Health concept

Per- and polyfluorinated alkyl substances (PFAS) have long been known for their detrimental effects on the ecosystems and living organisms; however the long-term impact on the marine environment is still insufficiently recognized. Based on PFAS persistence and bioaccumulation in the complex marine food network, adverse effects will be exacerbated by global processes such as climate change and synergies with other pollutants, like microplastics. The range of fluorochemicals currently included in the PFAS umbrella has significantly expanded due to the updated OECD definition, raising new concerns about their poorly understood dynamics and negative effects on the ocean wildlife and human health. Mitigation challenges and approaches, including biodegradation and currently studied materials for PFAS environmental removal are proposed here, highlighting the importance of ongoing monitoring and bridging research gaps. The PFAS EU regulations, good practices and legal frameworks are discussed, with emphasis on recommendations for improving marine ecosystem management.

Impact of microplastic pollution on coastal ecosystems using comprehensive beach quality indices

Previous studies of Microplastics (Mps) pollution focused on abundance, effect on organisms, and origins. Mps could also be indicators to evaluate pollution level. Beach Quality Indices (BQIs) are useful in understanding Mps pollution level. This study is to assess magnitude, impact and quality of beaches using BQIs, by determining abundance, shape, and size of Mps in beach sediments, which is the first effort in China. Three BQIs, i.e. Microplastic Pollution Index (MPPI), Environmental Status Index (ESI), Coefficient of Microplastic Impact (CMPI), were employed involving Sector Analysis Approach. All beaches had "very high" abundance by MPPI, were classified "bad" by ESI, and fell in "red" sector using Sector Analysis Approach by intergradation of MPPI and ESI. The impact of fiber morphology was "extreme" based on CMPI. The average abundance was 664±80 Mps/kg. Fibers occupied >97 % of Mps, with 31 % of black Mps. A model was proposed to determine Mps origins.

Sources, Degradation, Ingestion and Effects of Microplastics on Humans: A Review

Celluloid, the predecessor to plastic, was synthesized in 1869, and due to technological advancements, plastic products appear to be ubiquitous in daily life. The massive production, rampant usage, and inadequate disposal of plastic products have led to severe environmental pollution. Consequently, reducing the employment of plastic has emerged as a pressing concern for governments globally. This review explores microplastics, including their origins, absorption, and harmful effects on the environment and humans. Several methods exist for breaking down plastics, including thermal, mechanical, light, catalytic, and biological processes. Despite these methods, microplastics (MPs, between 1 and 5 mm in size) continue to be produced during degradation. Acknowledging the significant threat that MPs pose to the environment and human health is imperative. This form of pollution is pervasive in the air and food and infiltrates our bodies through ingestion, inhalation, or skin contact. It is essential to assess the potential hazards that MPs can introduce. There is evidence suggesting that MPs may have negative impacts on different areas of human health. These include the respiratory, gastrointestinal, immune, nervous, and reproductive systems, the liver and organs, the skin, and even the placenta and placental barrier. It is encouraging to see that most of the countries have taken steps to regulate plastic particles. These measures aim to reduce plastic usage, which is essential today. At the same time, this review summarizes the degradation mechanism of plastics, their impact on human health, and plastic reduction policies worldwide. It provides valuable information for future research on MPs and regulatory development.

Transcriptomic analysis of oxidative stress mechanisms induced by acute nanoplastic exposure in Sepia esculenta larvae

Nanoplastics (NPs), as a new type of pollutant with a size small than 1 μm, are ubiquitous and harmful to organisms. There has been an increasing amount of research concerning the effects of NPs on organisms over recent years, especially on aquatic animals. However, there is a limited study on the impact of NPs on mollusk cephalopods. In this research, Sepia esculenta, belonging to Cephalopoda, Coleoidea, Sepioidea, was selected to explore the effects caused by NPs exposure. The S. esculenta larvae were exposed to polystyrene NPs (PS-NPs) with diameter 50 nm (100 mg/L) for 4 h. The detection of oxidative stress biomarkers displayed an obvious increase in SOD (superoxide dismutase) activity and MDA (malondialdehyde) level. Then, RNA-Seq was performed to explore the oxidative stress response at mRNA level. The transcriptome analysis demonstrated that the expression of 2,570 genes was affected by PS-NPs. Besides, the signaling pathways of ribosome, ribosome biogenesis in eukaryotes, proteasome, and MAPK were enriched. This study not only provides novel references for understanding the mechanisms of oxidative stress response induced by NPs, but also reminds us to follow with interest the influence of acute exposure to NPs.