Biodegradable PLGA microspheres as a delivery system for malaria synthetic peptide SPf66

Assessing the Efficacy of PLGA-Loaded Antimicrobial Peptide OH-CATH30 Microspheres for the Treatment of Bacterial Keratitis: A Promising Approach

Bacterial keratitis in animals presents challenges due to ocular structural barriers, hindering effective drug delivery. In this study, we used biocompatible and biodegradable poly(lactic-co-glycolic acid) (PLGA) to encapsulate the naturally occurring antimicrobial peptide OH-CATH30, an alternative to conventional antibiotics, for the treatment of bacterial keratitis in animals. Microspheres (MS) were prepared using a modified water-in-oil-in-water (W/O/W) double-emulsion method with optimized osmotic pressure. We conducted comprehensive evaluations, including in vitro characterization, encapsulation efficiency determination, in vitro release kinetics, and in vivo/vitro assessments of irritation and bacterial inhibition. The optimized method yielded microspheres with impressive encapsulation efficiency of 75.2 ± 3.62% and a loading capacity of 18.25 ± 5.73%, exhibiting a well-defined particle size distribution (200-1000 nm) and a ζ-potential of -17.3 ± 1.91 mV. The microspheres demonstrated initial burst release followed by sustained and controlled release in vitro. Both in vitro and in vivo tolerance tests confirmed the biocompatibility of the drug-loaded microspheres, as they did not elicit significant irritation in ocular tissues. Remarkable antibacterial effects were observed in both in vitro and in vivo experiments. Our developed PLGA microspheres show promise as an alternative therapeutic option for topical administration in managing keratitis, offering exceptional drug delivery capabilities, improved bioavailability, and potent antibacterial efficacy.

PLGA Nanoparticle-Based Dissolving Microneedle Vaccine of Clostridium perfringens ε Toxin

Epsilon toxin (ETX) is an exotoxin produced by type B and D Clostridium perfringens that causes enterotoxemia or necrotic enteritis in animals such as goats, sheep, and cattle. Vaccination is a key method in preventing such diseases. In this study, we developed a new type of dissolving microneedle patch (dMN) with a nanoparticle adjuvant for enhanced immune response to deliver the rETXY196E-C protein vaccine. We chose FDA-approved poly(lactic-co-glycolic acid) (PLGA) to prepare nanospheres as the vaccine adjuvant and introduced dimethyldioctadecylammonium bromide (DDAB) to make the surface of PLGA nanoparticles (PLGA NPs) positively charged for antigen adsorption. PLGA NPs with a diameter of 100~200 nm, a surface ZETA potential of approximately +40 mV, and good safety were successfully prepared and could effectively adsorb rETXY196E-C protein. Using non-toxic and antibacterial fish gelatin as the microneedle (MN) matrix, we prepared a PLGA-DDAB dMN vaccine with good mechanical properties that successfully penetrated the skin. After immunization of subcutaneous (SC) and dMN, antibody titers of the PLGA and Al adjuvant groups were similar in both two immune ways. However, in vivo neutralization experiments showed that the dMN vaccines had a better protective effect. When challenged with 100 × LD50 GST-ETX, the survival rate of the MN group was 100%, while that of the SC Al group was 80%. However, a 100% protective effect was achieved in both immunization methods using PLGA NPs. In vitro neutralization experiments showed that the serum antibodies from the dMN and SC PLGA NPs groups both protect naive mice from 10 × LD50 GST-ETX attack after being diluted 20 times and could also protect MDCK cells from 20 × CT50 GST-ETX attack. In conclusion, the PLGA-DDAB dMN vaccine we prepared has good mechanical properties, immunogenicity, and protection, and can effectively prevent ETX poisoning. This provides a better way of delivering protein vaccines.

Nanovaccines against Viral Infectious Diseases

Infectious diseases have always been regarded as one of the greatest global threats for the last century. The current ongoing COVID-19 pandemic caused by SARS-CoV-2 is living proof that the world is still threatened by emerging infectious diseases. Morbidity and mortality rates of diseases caused by Coronavirus have inflicted devastating social and economic outcomes. Undoubtedly, vaccination is the most effective method of eradicating infections and infectious diseases that have been eradicated by vaccinations, including Smallpox and Polio. To date, next-generation vaccine candidates with novel platforms are being approved for emergency use, such as the mRNA and viral vectored vaccines against SARS-CoV-2. Nanoparticle based vaccines are the perfect candidates as they demonstrated targeted antigen delivery, improved antigen presentation, and sustained antigen release while providing self-adjuvanting functions to stimulate potent immune responses. In this review, we discussed most of the recent nanovaccines that have found success in immunization and challenge studies in animal models in comparison with their naked vaccine counterparts. Nanovaccines that are currently in clinical trials are also reviewed.

Current possibilities and future perspectives for improving efficacy of allergen-specific sublingual immunotherapy

Allergen-specific sublingual immunotherapy (SLIT), a safe and efficient route for treating type I hypersensitivity disorders, requires high doses of allergens. SLIT is generally performed without adjuvants and delivery systems. Therefore, allergen formulation with appropriate presentation platforms results in improved allergen availability, targeting the immune cells, inducing regulatory immune responses, and enhancing immunotherapy's efficacy while decreasing the dose of the allergen. In this review, we discuss the adjuvants and delivery systems that have been applied as allergen-presentation platforms for SLIT. These adjuvants include TLRs ligands, 1α, 25-dihydroxy vitamin D3, galectin-9, probiotic and bacterial components that provoke allergen-specific helper type-1 T lymphocytes (TH1), and regulatory T cells (Tregs). Another approach is encapsulation or adsorption of the allergens into a particulate vector system to facilitate allergen capture by tolerogenic dendritic cells. Also, we proposed strategies to increasing the efficacy of SLIT via new immunopotentiators and carrier systems in the future.

Polymeric Nanoparticle Based Diagnosis and Nanomedicine for Treatment and Development of Vaccines for Cerebral Malaria: A Review on Recent Advancement

Cerebral malaria occurs due to Plasmodium falciparum infection, which causes 228 million infections and 450,000 deaths worldwide every year. African people are mostly affected with nearly 91% cases, of which 86% are pregnant women and infants. India and Brazil are the other two countries severely suffering from malaria endemicity. Commonly used drugs have severe side effects, and unfortunately no suitable vaccine is available in the market today. In this line, this review is focused on polymeric nanomaterials and nanocapsules that can be used for the development of effective diagnostic strategies, nanomedicines, and vaccines in the management of cerebral malaria. Further, this review will help scientists and medical professionals by updating the status on the development stages of polymeric nanoparticle based diagnostics, nanomedicines, and vaccines and strategies to eradicate cerebral malaria. In addition to this, the predominant focus of this review is antimalarial agents based on polymer nanomedicines that are currently in the preclinical and clinical trial stages, and potential developments are suggested as well. This review further will have an important social and commercial impact worldwide for the development of polymeric nanomedicines and strategies for the treatment of cerebral malaria.

Angelica sinensis polysaccharide encapsulated into PLGA nanoparticles as a vaccine delivery and adjuvant system for ovalbumin to promote immune responses

Nanoparticles (NPs)-based vaccine delivery systems are widely used for their ability to control the release of antigens and promote immune responses against cancer or infectious diseases. In this study, the immunopotentiator Angelica sinensis polysaccharide (ASP) and model protein antigen ovalbumin (OVA) were encapsulated into Poly(lactic-co-glycolic acid) (PLGA) to formulate the novel NPs-based vaccine delivery system (ASP-PLGA/OVA). These formulations were subcutaneously administered to mice, then the magnitude and kinetics of antibody and cellular immune responses were assessed. The ASP-PLGA/OVA NPs were pherical in shape with smooth surfaces, approximately 225.2 nm in average size, negatively charged (around -11.27 mV), and the encapsulation efficiency of OVA at around 66.28%, respectively. Furthermore, ASP-PLGA/OVA NPs could keep stable at 4 °C over 30 days and provide a sustained and controlled release of OVA from the NPs. The results demonstrated that mice immunized with ASP-PLGA/OVA NPs could significantly enhance lymphocyte proliferation and improve the ratio of CD4⁺ to CD8⁺ T cells, thereby ASP-PLGA/OVA NPs could induce a strong cellular immune response. Moreover, the ASP-PLGA/OVA NPs could induce vigorous and long-term IgG immune responses with a mixed Th1 and Th2 responses and up-regulate the levels of Th-associated cytokines. These results suggested that ASP-PLGA/OVA NPs, which stimulated strong and continuous antibody responses and induced cellular immune responses, could potentially serve as an efficient and safe vaccine delivery and adjuvant system against infections and diseases.

Conserved Binding Regions Provide the Clue for Peptide-Based Vaccine Development: A Chemical Perspective

Synthetic peptides have become invaluable biomedical research and medicinal chemistry tools for studying functional roles, i.e., binding or proteolytic activity, naturally-occurring regions’ immunogenicity in proteins and developing therapeutic agents and vaccines. Synthetic peptides can mimic protein sites; their structure and function can be easily modulated by specific amino acid replacement. They have major advantages, i.e., they are cheap, easily-produced and chemically stable, lack infectious and secondary adverse reactions and can induce immune responses via T- and B-cell epitopes. Our group has previously shown that using synthetic peptides and adopting a functional approach has led to identifying Plasmodium falciparumconserved regions binding to host cells. Conserved high activity binding peptides’ (cHABPs) physicochemical, structural and immunological characteristics have been taken into account for properly modifying and converting them into highly immunogenic, protection-inducing peptides (mHABPs) in the experimental Aotus monkey model. This article describes stereo–electron and topochemical characteristics regarding major histocompatibility complex (MHC)-mHABP-T-cell receptor (TCR) complex formation. Some mHABPs in this complex inducing long-lasting, protective immunity have been named immune protection-inducing protein structures (IMPIPS), forming the subunit components in chemically synthesized vaccines. This manuscript summarizes this particular field and adds our recent findings concerning intramolecular interactions (H-bonds or π-interactions) enabling proper IMPIPS structure as well as the peripheral flanking residues (PFR) to stabilize the MHCII-IMPIPS-TCR interaction, aimed at inducing long-lasting, protective immunological memory.

Synergistic effect of rSAG1 and rGRA2 antigens formulated in PLGA microspheres in eliciting immune protection against Toxoplasama gondii

There is still no human vaccine against Toxoplasma gondii (T. gondii), as one of the most successful parasites. In present study, we designed a subunit vaccine composed of recombinant SAG1 (rSAG1) and recombinant GRA2 (rGRA2) proteins. In order to improve the induced immune responses, rSAG1 and rGRA2 were adsorbed on Poly (DL-lactide-co-glycolide) (PLGA) microspheres (MS) prepared by double emulsion solvent evaporation method. BALB/c mice were subcutaneously vaccinated by rSAG1-adsorbed PLGA MS (rSAG1-PLGA), rGRA2-adsorbed PLGA MS (rGRA2-PLGA), and the mixture of both formulations (rSAG1/rGRA2-PLGA), twice with a 3-week interval. PLGA MS characteristics, protein release, cellular and humoral immune responses, and protection against acute toxoplasmosis were evaluated. All vaccinated mice induced significantly partial protection and longer survival times associated with higher IFN-γ/IL-10 ratio and higher amount of Toxoplasma-specific IgG antibodies compared to control groups. Interestingly, the synergistic effect of rSAG1 and rGRA2 in eliciting more potent cellular and humoral responses and consequently higher protection in comparison to single antigen was confirmed. This study introduces the mixture of rSAG1 and rGRA2 (derived from different stages of Toxoplasma life-cycle) formulated in PLGA MS as a promising candidate in vaccine development against T. gondii.

Peptide/protein vaccine delivery system based on PLGA particles

Due to the excellent safety profile of poly (D,L-lactide-co-glycolide) (PLGA) particles in human, and their biodegradability, many studies have focused on the application of PLGA particles as a controlled-release vaccine delivery system. Antigenic proteins/peptides can be encapsulated into or adsorbed to the surface of PLGA particles. The gradual release of loaded antigens from PLGA particles is necessary for the induction of efficient immunity. Various factors can influence protein release rates from PLGA particles, which can be defined intrinsic features of the polymer, particle characteristics as well as protein and environmental related factors. The use of PLGA particles encapsulating antigens of different diseases such as hepatitis B, tuberculosis, chlamydia, malaria, leishmania, toxoplasma and allergy antigens will be described herein. The co-delivery of antigens and immunostimulants (IS) with PLGA particles can prevent the systemic adverse effects of immunopotentiators and activate both dendritic cells (DCs) and natural killer (NKs) cells, consequently enhancing the therapeutic efficacy of antigen-loaded PLGA particles. We will review co-delivery of different TLR ligands with antigens in various models, highlighting the specific strengths and weaknesses of the system. Strategies to enhance the immunotherapeutic effect of DC-based vaccine using PLGA particles can be designed to target DCs by functionalized PLGA particle encapsulating siRNAs of suppressive gene, and disease specific antigens. Finally, specific examples of cellular targeting where decorating the surface of PLGA particles target orally administrated vaccine to M-cells will be highlighted.

The Use of Synthetic Carriers in Malaria Vaccine Design

Malaria vaccine research has been ongoing since the 1980s with limited success. However, recent improvements in our understanding of the immune responses required to combat each stage of infection will allow for intelligent design of both antigens and their associated delivery vaccine vehicles/vectors. Synthetic carriers (also known as vectors) are usually particulate and have multiple properties, which can be varied to control how an associated vaccine interacts with the host, and consequently how the immune response develops. This review comprehensively analyzes both historical and recent studies in which synthetic carriers are used to deliver malaria vaccines. Furthermore, the requirements for a synthetic carrier, such as size, charge, and surface chemistry are reviewed in order to understand the design of effective particle-based vaccines against malaria, as well as providing general insights. Synthetic carriers have the ability to alter and direct the immune response, and a better control of particle properties will facilitate improved vaccine design in the near future.

Designing improved poly lactic-co-glycolic acid microspheres for a malarial vaccine: incorporation of alginate and polyinosinic-polycytidilic acid

Vaccination using proteins and peptides is currently gaining importance. One of the major drawbacks of this approach is the lack of an efficient immune response when the antigens are administered without adjuvants. In this study, we have taken the advantage of a combined adjuvant system in order to improve the immunogenicity of the SPf66 malarial antigen. For that purpose, we have combined poly (lactic-co-glycolic) acid microspheres, alginate, and polyinosinic polycytidilic acid. Our results show that microspheres can enhance the IgG production obtained with Freund's complete adjuvant. We have attributed this improvement to the presence of polyinosinic polycytidilic acid, since formulations comprising this adjuvant overcame the immune response from the others. In addition, our microspheres produced both IgG1 and IgG2a, leading to mixed Th1/Th2 activation, optimal for malaria vaccination. In conclusion, we have designed a preliminary formulation with a high potential for the treatment of malaria.

Active self-healing encapsulation of vaccine antigens in PLGA microspheres

Herein, we describe the detailed development of a simple and effective method to microencapsulate vaccine antigens in poly(lactic-co-glycolic acid) (PLGA) by simple mixing of preformed active self-microencapsulating (SM) PLGA microspheres in a low concentration aqueous antigen solution at modest temperature (10-38 °C). Co-encapsulating protein-sorbing vaccine adjuvants and polymer plasticizers were used to "actively" load the protein in the polymer pores and facilitate polymer self-healing at a temperature>the hydrated polymer glass transition temperature, respectively. The microsphere formulation parameters and loading conditions to provide optimal active self-healing microencapsulation of vaccine antigens in PLGA was investigated. Active self-healing encapsulation of two antigens, ovalbumin and tetanus toxoid (TT), in PLGA microspheres was adjusted by preparing blank microspheres containing different vaccine adjuvants (aluminum hydroxide (Al(OH)₃) or calcium phosphate). Active loading of vaccine antigen in Al(OH)₃-PLGA microspheres was found to: a) increase with an increasing loading of Al(OH)₃ (0.88-3 wt.%) and addition of porosigen, b) decrease when the inner Al(OH)₃/trehalose phase to 1 mL outer oil phase and size of microspheres was respectively >0.2 mL and 63 μm, and c) change negligibly by PLGA concentration and initial incubation (loading) temperature. Encapsulation of protein sorbing Al(OH)₃ in PLGA microspheres resulted in suppression of self-healing of PLGA pores, which was then overcome by improving polymer chain mobility, which in turn was accomplished by coincorporating hydrophobic plasticizers in PLGA. Active self-healing microencapsulation of manufacturing process-labile TT in PLGA was found to: a) obviate micronization- and organic solvent-induced TT degradation, b) improve antigen loading (1.4-1.8 wt.% TT) and encapsulation efficiency (~97%), c) provide nearly homogeneous distribution and stabilization of antigen in polymer, and d) provide improved in vitro controlled release of antigenic TT.

An overview on the field of micro- and nanotechnologies for synthetic Peptide-based vaccines

The development of synthetic peptide-based vaccines has many advantages in comparison with vaccines based on live attenuated organisms, inactivated or killed organism, or toxins. Peptide-based vaccines cannot revert to a virulent form, allow a better conservation, and are produced more easily and safely. However, they generate a weaker immune response than other vaccines, and the inclusion of adjuvants and/or the use of vaccine delivery systems is almost always needed. Among vaccine delivery systems, micro- and nanoparticulated ones are attractive, because their particulate nature can increase cross-presentation of the peptide. In addition, they can be passively or actively targeted to antigen presenting cells. Furthermore, particulate adjuvants are able to directly activate innate immune system in vivo. Here, we summarize micro- and nanoparticulated vaccine delivery systems used in the field of synthetic peptide-based vaccines as well as strategies to increase their immunogenicity.

Polylactide-co-glycolide nanoparticles for controlled delivery of anticancer agents

The effectiveness of anticancer agents may be hindered by low solubility in water, poor permeability, and high efflux from cells. Nanomaterials have been used to enable drug delivery with lower toxicity to healthy cells and enhanced drug delivery to tumor cells. Different nanoparticles have been developed using different polymers with or without surface modification to target tumor cells both passively and/or actively. Polylactide-co-glycolide (PLGA), a biodegradable polyester approved for human use, has been used extensively. Here we report on recent developments concerning PLGA nanoparticles prepared for cancer treatment. We review the methods used for the preparation and characterization of PLGA nanoparticles and their applications in the delivery of a number of active agents. Increasing experience in the field of preparation, characterization, and in vivo application of PLGA nanoparticles has provided the necessary momentum for promising future use of these agents in cancer treatment, with higher efficacy and fewer side effects.

Development of chondroitin sulfate encapsulated PLGA microsphere delivery systems with controllable multiple burst releases for treating osteoarthritis

The purpose of the study was to design and develop unique drug delivery systems with controllable multiple burst releases of drugs for treating osteoarthritis. Chondroitin sulfate (CS) was encapsulated into four types of PLGA materials, that is, PLGA 50:50, PLGA 65:35, PLGA 75:25, and PLGA 85:15. The effects of microsphere size and various combinations of blend PLGA microspheres on CS release were investigated. The cytotoxicity of the CS-encapsulated microspheres was investigated according to the ISO 10993 guideline. Our study showed that the encapsulation efficiency of CS into PLGA 50:50 microspheres varied with the size of microspheres; however, the encapsulation efficiencies of CS into PLGA microspheres were independent of the types of PLGA materials. The size of PLGA microspheres was shown to affect the rate of CS release. With the increase of microsphere size from 75-150 μm to 300-355 μm, the initial CS release decreased. Further increase in microsphere size led to an increase in the initial CS release. In addition, combination of different types of PLGA microspheres was shown to be capable of achieving multiple burst CS releases. Moreover, the CS encapsulated PLGA microspheres were shown to be non-cytotoxic. This study proved the concept of multiple burst drug releases that were achieved by encapsulating CS into different types of PLGA microspheres and delivering CS from systems consisting of mixed types of PLGA microspheres, which may be applied to treat osteoarthritis by mimicking multiple intra-joint injection of therapeutic agents.

Intravital microscopy imaging of macrophage localization to immunogenic particles and co-localized tissue oxygen saturation

Well-designed biomaterial polymer particle-based vaccines will optimally promote immune cell antigen-presenting behavior while minimizing adverse inflammatory responses to the particles and encapsulated drugs or adjuvants. It is important in the design of particle-based vaccines to consider possible harmful effects of immune response on tissue at the vaccination site. Intravital microscopy with rodent dorsal skin window chambers enables in vivo serial observations in the same animal, and such models which have been used to study angiogenesis and macrophage response to implanted biomaterials may also be useful for the development of particle-based vaccines. To our knowledge there have been no reports where intravital microscopy has documented real-time immune cell localization and potentially harmful co-localized tissue effects. In this proof-of-principle study we used fluorescence and spectral imaging intravital microscopy of mouse window chambers to measure macrophage localization and co-localized tissue microvessel hemoglobin saturation changes in response to an immunogenic stimulus from polymer particles loaded with lipopolysaccharide (LPS) serving as a model vaccine/adjuvant system. We observed greater and faster macrophage localization to stronger inflammatory stimuli from LPS-loaded particle doses, a trend of decreased microvessel oxygenation with increased macrophage accumulation and, in an extreme case, complete microvessel collapse accompanied by tissue necrosis. Our technique may be useful for optimizing design of particle-based vaccines and may give insight into the use of hemoglobin saturation as a biomarker of tissue inflammation for clinical investigations of particle-based vaccines.

Claudin 4-targeted protein incorporated into PLGA nanoparticles can mediate M cell targeted delivery

Polymer-based microparticles are in clinical use mainly for their ability to provide controlled release of peptides and compounds, but they are also being explored for their potential to deliver vaccines and drugs as suspensions directly into mucosal sites. It is generally assumed that uptake is mediated by epithelial M cells, but this is often not directly measured. To study the potential for optimizing M cell uptake of polymer microparticles in vivo, we produced sub-micron size PLGA particles incorporating a recombinant protein. This recombinant protein was produced with or without a c-terminal peptide previously shown to have high affinity binding to Claudin 4, a protein associated with M cell endocytosis. While the PLGA nanoparticles incorporate the protein throughout the matrix, much of the protein was also displayed on the surface, allowing us to take advantage of the binding activity of the targeting peptide. Accordingly, we found that instillation of these nanoparticles into the nasal passages or stomach of mice was found to significantly enhance their uptake by upper airway and intestinal M cells. Our results suggest that a reasonably simple nanoparticle manufacture method can provide insight into developing an effective needle-free delivery system.

Immunogenicity and protective efficacy of virosome based vaccines against Newcastle disease

Virosome based vaccines against Newcastle disease (ND) were prepared and evaluated for their immunogenicity and protective efficacy in chickens. Envelop of Newcastle disease virus (NDV) was solubilised with Triton X-100 to yield virosomes which were later on encapsulated in poly-lactide-co-glycolide (PLG) microspheres. The birds were immunized intranasally with virosomes or PLG microspheres encapsulated virosomes, and efficacy of these preparations was compared with commercial LaSota vaccine. The preparations protected the chickens against virulent virus challenge infection, however the microencapsulated virosome vaccine gave slightly lesser degree of protection than non encapsulated counterpart. The humoral and cell mediated immune response generated as well as the protection afforded by virosome preparations were found to be comparable with LaSota vaccine. The results substantiate the potential of virosome based vaccines to provide high level of immunity and protection against Newcastle disease.

Induction of mucosal and systemic humoral immune responses in murine system by intranasal immunization with peptide antigens of P. vivax and CpG oligodeoxynucleotide (ODN) in microparticle delivery

In the present study we have investigated the immunomodulatory effects of two adjuvants, CpG 1826 (two copies of CpG motifs) and CpG 2006 (three copies of CpG motifs) to the five peptide antigens of Plasmodium vivax derived from circumsporozoite protein (CSP), merozoite surface protein-1 (MSP1#1, MSP1#23), apical membrane antigen-1 (AMA-1) and gametocyte surface antigen (Pvs24) in alum and microparticle formulations, using intramuscular and intranasal routes of immunization. Alum formulation without CpG ODN generated low serum IgG and IgA antibody titers and the predominant IgG isotypes were IgG1 but with the addition of CpG ODN (1826 or 2006), the antibody titers were increased by four fold with the predominance of IgG2a/2b isotypes. The SIgA peak titers in lung and intestinal washes were significantly increased with the intranasal mode of administration. Specific activity measurement was done to calculate for the accurate amounts of total serum IgG, IgA and SIgA in washes and showed direct correlation between antibody titer and its concentration. High titer anti-Pvs24 antibodies have significant inhibitory effects on parasite development in the mosquito midgut when tested in membrane feeding assays. The immunofluorescence results show that the peptide specific antisera reacted with the air-dried parasite antigens isolated from P. vivax patients. The present study demonstrates that intranasal route of immunization appears to be an alternate mode of inducing protective immunity in P. vivax malaria.

Poly(lactide-co-glycolide) microspheres: a potent oral delivery system to elicit systemic immune response against inactivated rabies virus

Rabies is an endemic, fatal zoonotic disease in the developing countries. Oral vaccination strategies are suitable for rabies control in developing countries. Studies were performed to investigate the suitability of poly(lactide-co-glycolide) (PLG) microspheres as an oral delivery system for beta-propiolactone inactivated concentrated rabies virus (CRV). Immune responses induced by encapsulated (PLG+CRV) and un-encapsulated inactivated rabies virus after oral and intraperitoneal route administrations were compared. The anti-rabies virus IgG antibody titer, virus neutralizing antibody (VNA) titers obtained by mouse neutralization test (MNT) and IgG2a and IgG1 titers of mice group immunized orally with PLG+CRV showed significantly (p<0.001) higher response than the group immunized orally with un-encapsulated CRV. There was no significant difference (p>0.05) between groups inoculated by intraperitoneal route. The stimulation index (SI) obtained by lymphoproliferation assay of PLG+CRV oral group also showed significantly (p<0.001) higher response than the group immunized orally with un-encapsulated CRV, suggesting that oral immunization activates Th1-mediated cellular immunity. Immunized mice of all experimental groups were challenged intracerebrally with a lethal dose of virulent rabies virus Challenge Virus Standard (CVS). The survival rates of mice immunized orally with PLG+CRV and CRV alone were 75% and 50%, respectively, whereas intraperitoneally immunized groups showed 100% protection. The overall results of humoral, cellular immune response and survival rates of mice immunized orally with PLG+CRV were significantly (p<0.001) higher than those of mice immunized orally with CRV alone. These data suggest that the PLG encapsulated inactivated rabies virus can be used for oral immunization against rabies.

Design opportunities for actively targeted nanoparticle vaccines

Vaccines for many infectious diseases are poorly developed or simply unavailable. There are significant technological and practical design issues that contribute to this problem; thus, a solution to the vaccine problem will require a systematic approach to test the multiple variables that are required to address each of the design challenges. Nanoparticle technology is an attractive methodology for optimizing vaccine development because design variables can be tested individually or in combination. The biology of individual components that constitute an effective vaccine is often well understood and may be integrated into particle design, affording optimal immune responses to specific pathogens. Here, we review technological variables and design parameters associated with creating modular nanoparticle vaccine systems that can be used as vectors to protect against disease. Variables, such as the material and size of the core matrix, surface modification for attaching targeting ligands and routes of administration, are discussed. Optimization of these variables is important for the development of nanoparticle-based vaccine systems against infectious diseases and cancer.

Gamma-irradiation effects on biopharmaceutical properties of PLGA microspheres loaded with SPf66 synthetic vaccine

Gamma-irradiation is currently the method of choice for terminal sterilization of drug delivery systems made from biodegradable polymers. However, the consequences of gamma-sterilization on the immune response induced by microencapsulated antigens have not yet been reported in the literature. The aim of the present work was to evaluate the effect of gamma-irradiation on the biopharmaceutical properties of PLGA microspheres containing SPf66 malarial antigen. Microspheres were prepared by a (w/o/w) double emulsion/solvent extraction method. Once prepared, part of the formulation was irradiated at a dose of 25 kGy using 60Co gamma as radiation source. The in vitro results obtained showed that the gamma-irradiation exposure had no apparent effect on SPf66 integrity and formulation properties such us morphology, size and peptide loading. Only the release rate of SPf66 was slightly faster after gamma-irradiation. Subcutaneous administration of irradiated and non-irradiated microspheres into mice induced a similar immune response (IgG, IgG1, IgG2a levels) and was comparable to that obtained with SPf66 emulsified with Freund's complete adjuvant. These observations illustrate the applicability of gamma-irradiation as a method of terminal sterilization of microparticulate delivery systems based on chemically synthesized antigens encapsulated into biodegradable PLGA microspheres.

Economic and practical challenges to the formulation of vaccines against endemic infectious diseases such as malaria

Herein, we analyze in general the current vaccine market and identify potential factors driving and modulating supply and demand for vaccines. An emphasis is placed on changes in regulation in the last 20 years which have led to increased indirect costs of production, and which can create a barrier against the timely use of technological advances to reduce direct costs. Other defining industry characteristics, such as firm numbers and sizes, cost and pricing strategies, nature extent and impact of Government involvement and international regulation are noted. These considerations, far from being removed from basic vaccine research, influence its ability to achieve aims that can be then progressed into effective vaccine products. We discuss specifically the development of particulate vaccines against malaria, a major lethal disease and health problem prevalent in Africa, including some key economic and methodological challenges and opportunities. We note some practical issues blocking the development of effective particulate vaccines for the Third World, mainly driven by the regulatory spiral noted above.

Adjuvant activity of polymer microparticles and Montanide ISA 720 on immune responses to Plasmodium falciparum MSP2 long synthetic peptides in mice

The purpose of this work was to test the immunogenicity in C57BL mice of two synthetic peptides derived from the constant region of 3D7 and FC27 Plasmodium falciparum MSP2 dimorphic proteins, either microencapsulated into poly-lactide-co-glycolide acid microparticles (PLGA MP) or delivered with the human compatible adjuvant Montanide ISA 720 for comparison. Potent and prolonged antibody responses were obtained for both peptides by using PLGA MP formulations after subcutaneous or intradermal injections. As compared to the subcutaneous route of immunization, the intradermal route induced greater immune responses. Montanide adjuvant was effective in eliciting antibodies against the 3D7 peptide but not against the FC27 peptide. Peptide-specific cytophilic antibodies (IgG2a) were detected after boosting with homologous peptide for all vaccine formulations. MP formulations elicited a lower IgE secretion as compared to that observed for both Montanide formulated vaccines. Our results demonstrate the ability of the polymer microparticles to overcome the lack of immunogenicity of FC27 MSP2 peptide in C57BL mice and their potential to induce desirable immune responses against malaria.

Biodegradable PLGA Particles for Improved Systemic and Mucosal Treatment of Type I Allergy

Although allergen immunotherapy is basically a story of success, it still needs improvement. The goal of this study was to optimize parenteral and oral allergen formulations through using the biocompatible polymer of lactic and glycolic acid (PLGA). Subcutaneous application of birch pollen allergen Bet v 1 encapsulated in nanoparticles biased the immune response toward Th1 in allergic mice and did not elicit granuloma formation in mice and in human volunteers. When oral immunotherapy of mice was tried with birch pollen-filled PLGA microparticles, mucosal targeting was indispensable for achieving any immune response, and targeting of M-cells was necessary for modulating an ongoing allergic response toward Th1. The authors suggest that biocompatible PLGA nano- or microparticles can be useful tools for upgrading therapy of type I allergy.

Methods to assess in vitro drug release from injectable polymeric particulate systems

This review provides a compilation of the methods used to study real-time (37 degrees C) drug release from parenteral microparticulate drug delivery systems administered via the subcutaneous or intramuscular route. Current methods fall into three broad categories, viz., sample and separate, flow-through cell, and dialysis techniques. The principle of the specific method employed along with the advantages and disadvantages are described. With the "sample and separate" technique, drug-loaded microparticles are introduced into a vessel, and release is monitored over time by analysis of supernatant or drug remaining in the microspheres. In the "flow-through cell" technique, media is continuously circulated through a column containing drug-loaded microparticles followed by analysis of the eluent. The "dialysis" method achieves a physical separation of the drug-loaded microparticles from the release media by use of a membrane, which allows for sampling without interference of the microspheres. With all these methods, the setup and sampling techniques seem to influence in vitro release; the results are discussed in detail, and criteria to aid in selection of a method are stated. Attempts to establish in vitro-in vivo correlation for these injectable dosage forms are also discussed. It would be prudent to have an in vitro test method for microparticles that satisfies compendial and regulatory requirements, is user friendly, robust, and reproducible, and can be used for quality-control purposes at real-time and elevated temperatures.

Use of biodegradable PLGA microspheres as a slow release delivery system for the Boophilus microplus synthetic vaccine SBm7462

The synthetic anti-Boophilus microplus vaccine SBm7462 derived from the tick intestinal protein, Bm86, induced a protective immune response when emulsified in saponin and used in cattle. Using a mice model, and with the objective of improving the vaccine by continual peptide release, it was encapsulated in PLGA 50:50 microspheres and inoculated in BALB/c mice to assess the immunological response by detection of anti-peptide IgGs. Comparative studies were made with the peptide emulsified in saponin and with another synthetic vaccine, and the microsphere/peptide was characterized for efficiency of encapsulation, in vitro release profile, morphology, size, peptide integrity after encapsulation and stability in different pHs. The findings showed that saponin enhances a better immune response from SBm7462 and that the PLGA 50:50 microspheres are suitable for use with this peptide.

Review of novel particulate antigen delivery systems with special focus on treatment of type I allergy

For the treatment of infectious diseases, cancer and allergy, the directed induction of an appropriate immune response is the ultimate goal. Therefore, with the development of pure, often very small proteins, peptides or DNA by molecular biology techniques, the research for suitable adjuvants or delivery systems became increasingly important. Particle formulations are made of a variety of materials, including lipids, proteins or amino acids, polysaccharides, polyacrylic substances or organic acids. Microparticles serve as vehicles and provide a depot for the entrapped or coupled antigen. The release occurs in a pulsatile or continuous manner, a feature, which is well controllable for many particulate systems. Particles attract antigen presenting cells to the administration site, thereby guaranteeing the efficient presentation of the antigen to the immune system. Importantly, particles also protect the entrapped substance. This is especially necessary after oral application to avoid gastric or tryptic breakdown. In this article, the design and construction of different antigen delivery systems and their immune effects, with special focus on the suitability for allergy treatment, are discussed.

Biodegradable microspheres as carriers for native superoxide dismutase and catalase delivery

The purpose of this research was to encapsulate superoxide dismutase (SOD) and catalase (CAT) in biodegradable microspheres (MS) to obtain suitable sustained protein delivery. A modified water/oil/water double emulsion method was used for poly(D,L-lactide-co-glycolide) (PLGA) and poly(D,L-lactide) PLA MS preparation co-encapsulating mannitol, trehalose, and PEG400 for protein stabilization. Size, morphology, porosity, mass loss, mass balance, in vitro release and in vitro activity were assessed by using BCA protein assay, scanning electron microscopy, BET surface area, and particle-sizing techniques. In vitro activity retention within MS was evaluated by nicotinammide adenine dinucleotide oxidation and H2O2 consumption assays. SOD encapsulation efficiency resulted in 30% to 34% for PLA MS and up to 51% for PLGA MS, whereas CAT encapsulation was 34% and 45% for PLGA and PLA MS, respectively. All MS were spherical with a smooth surface and low porosity. Particle mean diameters ranged from 10 to 17 mum. CAT release was prolonged, but the results were incomplete for both PLA and PLGA MS, whereas SOD was completely released from PLGA MS in a sustained manner after 2 months. CAT results were less stable and showed a stronger interaction than SOD with the polymers. Mass loss and mass balance correlated well with the release profiles. SOD and CAT in vitro activity was preserved in all the preparations, and SOD was better stabilized in PLGA MS. PLGA MS can be useful for SOD delivery in its native form and is promising as a new depot system.

Potent, long lasting systemic antibody levels and mixed Th1/Th2 immune response after nasal immunization with malaria antigen loaded PLGA microparticles

The immunogenicity of the synthetic malaria vaccine SPf66 has been recently improved by the application of new adjuvants as QS-21 saponin or poly-D,L-lactide-co-glycolide (PLGA) polymers. The search for less invasive administration routes made us test the immunogenicity of SPf66-loaded microparticles by the nasal route in Balb/c mice. We report here that the intranasal administration of the adequate PLGA vaccine formulations greatly improves and maintains higher antibody levels compared to the conventional alum adjuvant and to the administration of the particles by other routes (subcutaneous, oral). Systemic immune responses were characterized as mixed Th1/Th2-type: IFN-gamma and IgG2a isotype were found as signs of Th1 activation, whilst IgE and IgG1 secretions indicate Th2 response. Since both types of response have been associated to protective immunity in malaria, we postulate that this new approach supposes an advantage over the traditional adjuvants and routes.

Allergen-loaded biodegradable poly(d,l-lactic-co-glycolic) acid nanoparticles down-regulate an ongoing Th2 response in the BALB/c mouse model

BACKGROUND AND OBJECTIVE

Biocompatible and biodegradable microparticles have gained interest as antigen delivery systems during the recent years. We investigated whether biodegradable poly(d,l-lactic-co-glycolic) acid (PLGA) nanospheres could be used as allergen vehicles for few-shot therapy of type I allergy.

METHODS

The major birch pollen allergen Bet v 1 was encapsulated in PLGA nanospheres (PLGA-Bet v 1). We examined the antigenicity and the immune response to PLGA-Bet v 1 in a BALB/c mouse model.

RESULTS

The antigenicity of Bet v 1 was largely unaffected by PLGA entrapment. When BALB/c mice were immunized subcutaneously with PLGA-Bet v 1, they formed allergen-specific IgG antibodies, but did not develop hypersensitivity to Bet v 1, as shown by type I skin tests. To evaluate their therapeutic potential, PLGA-Bet v 1 with or without Al(OH)3 or non-entrapped Bet v 1 with Al(OH)3 were used for single-shot treatment of sensitized mice. Both groups treated with PLGA-Bet v 1 developed high levels of Bet v 1-specific IgG2a antibodies (P<0.01), whereas IgG1 levels decreased significantly (P<0.01). Moreover, T cells from mice treated with PLGA-Bet v 1 showed IFN-gamma and IL-10 production. The synthesis of these cytokines was enhanced in the groups where Al(OH)3 had been added to the vaccine formulation.

CONCLUSION

Allergen-loaded PLGA nanoparticles modulate an ongoing Th2 response in the BALB/c mouse model, as demonstrated by down-regulation of IgG1 and production of IFN-gamma and IL-10. Our data strongly suggest that PLGA nanospheres can advantageously be used for formulations of allergen extracts or allergen derivatives for the few-shot treatment of type I allergy.

N/A

N/A

Immune response after oral administration of the encapsulated malaria synthetic peptide SPf66

The synthetic peptide SPf66 adsorbed on alum is one of the few Plasmodium falciparum vaccines which have been tested in field trials. We previously reported that subcutaneous administration of SPf66 loaded PLGA microparticles (MP) enhances the antibody response to this antigen compared to the conventional alum formulation. We now evaluate the suitability of polymeric formulations to obtain systemic immune responses by gastric intubation of Balb/c mice. Formulations composed of 1:1 mixtures of PLGA 50:50 and 75:25 (lactic:glycolic) microparticles were administered by the oral route, and when animals were boosted 3 weeks later significant systemic IgG antibody responses were elicited, comparable to alum triple shot and superior to the aqueous vaccine given by the oral route. The finding of IgG2a isotype for PLGA-vaccinated mice compared to the absent levels of this isotype for the alum-vaccinated group could be interpreted as a sign of Th1-like immune response and cellular immune response activation. Our results confirm that using the appropriate schedule the oral administration of PLGA particles is suitable to obtain systemic immune responses to the carried antigen.

Size dependent immune response after subcutaneous, oral and intranasal administration of BSA loaded nanospheres

BSA was entrapped in particles of different sizes (200, 500 and 1000 nm) prepared from poly(D,L-lactic-co-glycolic) acid by a double emulsion method. The particles were given, either intranasally, orally or subcutaneously, to Balb/c mice and the serum IgG, IgG1 and IgG2a response elicited was compared to that obtained by the subcutaneous administration of either free antigen, free antigen emulsified 1:1 with Freund's Complete Adjuvant (FCA), or free antigen administered with Al(OH)(3). The administration of 1000 nm particles generally elicited a higher serum IgG response than that obtained with the administration of 500 or 200 nm sized nanospheres, the immune response for 500 nm particles being similar than that obtained with 200 nm by the subcutaneous and the oral route, and higher by the intranasal route. PLGA nanoparticles can elicit serum IgG2a responses by the three routes studied. No significant differences on the serum IgG2a/IgG1 ratios were found after the subcutaneous, the oral and the intranasal administration of the different spheres but those were in general higher compared to the administration of either free antigen or free antigen adsorbed to alum. The route of administration influences the serum IgG2a/IgG1 ratio after the administration of free antigen, but not after the administration of the particles. Therefore, differences on the total serum IgG response induced by particles of different sizes do not result in differences on the IgG1 or IgG2a-type immune responses, suggesting that the antigen processing and presentation is similar in all cases tested for PLGA particles.

Influence of dose and immunization route on the serum Ig G antibody response to BSA loaded PLGA microspheres

BSA was entrapped into PLGA 50:50 microspheres and the in vitro release study was performed. Then 1 microg of microencapsulated antigen was subcutaneously administered to Balb/c mice and the serum Ig G response was compared to that obtained after the subcutaneous administration of the same amount of only free antigen or of free antigen emulsified 1:1 with Freund's complete adjuvant (FCA). The specific serum Ig G responses obtained from the microencapsulated antigen were higher than those obtained from the free antigen and similar to those obtained from the antigen emulsified with FCA. Therefore, the immune response obtained with the subcutaneous administration of 1 microg of microencapsulated antigen was used as a positive control to compare the immune response elicited by the administration of the spheres either by the oral or the intranasal route. There is a dose/response relationship in the serum Ig G response elicited after three consecutive oral administrations of microencapsulated antigen at a dosing range from 200 to 50 microg. However, this relationship does not seem to be clear for the intranasal administration of the spheres at the same dosing range. When comparing the serum Ig G responses at each dosing level for the different routes of administration, it can be observed that the intranasal route is a more powerful inducer of the production of specific Ig G antibody than the oral, which could be due to a greater permeability of the nasal epithelium and to qualitative differences between the mechanisms of induction of the immune response by each route. The serum Ig G2a versus Ig G1 ratio is not significantly different among all the groups that received antigen in microspheres.

Remarkably high antibody levels and protection against P. falciparum malaria in Aotus monkeys after a single immunisation of SPf66 encapsulated in PLGA microspheres

Single dose immunisation is a major goal in vaccine design. The purpose of this study was the development of a single dose delivery system for the SPf66 malaria vaccine, based on this antigen's microencapsulation in PLGA microspheres by double emulsion method. Results indicate that a single immunisation in mice and monkeys with the SPf66 malaria vaccine, encapsulated in a mixture of two formulations of PLGA microspheres, induced a remarkably high and long-lasting immune response as assessed by ELISA and Western Blott. This immune response was associated with a good protective capacity in Aotus monkeys, after experimental challenge, indicating that antigen integrity lasted following the microencapsulation process. PLGA biodegradable microspheres thus serve as an effective delivery system for the design of a single dose immunisation vaccine, such as the SPf66 synthetic malaria vaccine.