Freestanding Metal-Organic Frameworks and Their Derivatives: An Emerging Platform for Electrochemical Energy Storage and Conversion

Interface engineering of hollow Janus-structured NiCoP/P-MoS2 heterojunction as self-supported electrode enables boosted alkaline hydrogen evolution reaction

Transition metal phosphorus (TMPs) and sulfides have attracted extensive attention as important candidates to replace noble metal-based hydrogen evolution (HER) catalysts. However, the insufficient specific surface area, low conductivity and easy detachments from electrode seriously affect the HER catalytic activity and stability. Herein, a novel self-supported hollow Janus-structured NiCoP/P-MoS2 heterojunction is designed on carbon cloth (CC) as high-performance electrocatalyst for alkaline HER. The binder-free NiCoP/P-MoS2/CC electrode with well-dispersed hollow structure exhibits acceptable durability and low overpotential, which requires overpotential of 52.6 mV to reach 10 mA cm-2, far superior to that of NiCoP/CC (111.2 mV), P-MoS2/CC (213.3 mV) electrode and also the corresponding NiCoP/P-MoS2 powder catalyst (113.1 mV). Experimental and theoretical results confirm that heterointerface interaction can improve the electronic state, accelerate charge transfer and optimize hydrogen adsorption energy, resulting in boosted HER kinetic process. Additionally, self-supported strategy is conducive to tightly anchoring high-quality active substances with well-organized hollow array structure, which significantly prevents the catalyst agglomeration and shedding, leading to the improved HER stability. This work offers valuable insights into the catalytic mechanisms and provides an avenue for designing hierarchical architecture for highly efficient and stable HER electrocatalysts.

Self-Supported Flexible α-Ga2O3 Thin Films Enabled by Nanopillar-Integrated Sacrificial Layers

α-Ga2O3, known for its ultrawide bandgap and high breakdown electric field, has attracted significant attention in power electronics and solar-blind photodetectors. However, the rigid and insulating nature of sapphire substrates restricts the development of flexible α-Ga2O3-based devices, vertical power devices, and high-power electronics. Here, self-supported flexible α-Ga2O3 thin films were prepared by a Bridge Pier-like structure. In this structure, highly vertical and dispersion-controlled α-Ga2O3 nanopillar arrays, an α-Fe2O3 array-type sacrificial layer, and high-quality α-Ga2O3 epitaxial films were sequentially grown on sapphire substrates by an economical mist chemical vapor deposition (mist-CVD) technique. The flow channels created by the array-type sacrificial layer significantly enhanced etchant flow, enabling the rapid detachment of freestanding 3-μm-thick α-Ga2O3 flexible films in just 20 min─a nearly 10-fold increase in detachment efficiency compared to conventional sacrificial layer designs. The freestanding α-Ga2O3 thin films were used to fabricate flexible solar-blind photodetectors that, under 254 nm ultraviolet illumination, achieved an on/off ratio of 0.57 × 103 and a detectivity of 3.18 × 1010 Jones, while also exhibiting exceptional mechanical flexibility and optoelectronic stability with no degradation observed after 1000 bending cycles. This work provides a pathway for the fabrication of α-Ga2O3 flexible devices and freestanding substrates, offering an innovative strategy for the rapid detachment of thin films in heteroepitaxial systems.

MOF-Based Bioelectronic Supercapacitors

Metal-organic frameworks (MOFs) represent a highly promising material class for bioelectronic supercapacitors, characterized by their adjustable structures, extensive surface areas, and superior electrochemical properties. This research explores the synthesis and incorporation of MOF-based materials into bioelectronic devices aimed at energy storage and biosensing applications. The focus is on improving the electrochemical performance of MOFs while preserving their structural integrity through functionalization with biocompatible polymers and conductive materials. The resulting MOF-based bioelectronic supercapacitors exhibit significant improvements in specific capacitance, energy density, and cycling stability. Additionally, the inclusion of bioreceptors allows for the simultaneous detection of biochemical signals alongside energy storage, thus enabling innovative applications in wearable electronics and health monitoring systems. These results suggest that MOF-based supercapacitors have the capacity to fulfill energy storage needs while also advancing bioelectronics by merging energy and sensing capabilities.

Metal-Organic Frameworks (MOFs): Multifunctional Platforms for Environmental Sustainability

Metal-Organic Frameworks (MOFs) have emerged as versatile materials bridging inorganic and organic chemistry to address critical environmental challenges. Composed of metal nodes and organic linkers, these crystalline structures offer unique properties such as high surface area, tunable pore sizes, and structural diversity. Recent advancements in MOFs synthesis, particularly innovative approaches like mechanochemical, microwave-assisted, and ultrasonic synthesis, have significantly enhanced sustainability by utilizing non-toxic solvents, renewable feedstocks, and energy-efficient processes, offering promising solutions to reduce environmental impact. This review highlights these novel methods and their contributions to improving MOFs functionality for applications in environmental remediation, gas capture, and energy storage. We examine the potential of MOFs in catalysis for pollutant degradation, water purification, and hazardous waste removal, as well as their role in next-generation energy storage technologies, such as supercapacitors, batteries, and hydrogen production. Furthermore, we address challenges including scalability, stability, and long-term performance, underscoring the need for continued innovation in synthesis techniques to enable large-scale MOFs applications. Overall, MOFs hold transformative potential as multifunctional materials, and advancements in synthesis and sustainability are critical for their successful integration into practical environmental and energy solutions.

Tunable Platform Capacity of Metal-Organic Frameworks via High-Entropy Strategy for Ultra-Fast Sodium Storage

Precise regulation of the platform capacity/voltage of electrode materials contributes to the efficient operation of sodium-ion fast-charging devices. However, the design of such electrode materials is still in a blank stage. Herein, based on tunable metal-organic frameworks, we have designed a novel material system-two-dimensional high-entropy metal-organic frameworks (HE-MOFs), which exhibits unique properties in sodium storage and is of vital importance for realizing fast-charging batteries. Furthermore, we have found that the high-entropy effect can regulate the electronic structure, the sodium-ion migration environment, and the sodium-ion storage active sites, thereby meeting the requirements of electrode materials for sodium-ion fast-charging devices. Impressively, the HE-MOFs material still maintains a reversible specific capacity of 89 mAh g-1 at a current density of 20 A g-1. It presents an ideal sodium storage voltage plateau of approximately 0.5 V, and its platform capacity is increased to 122.7 mAh g-1, far superior to that of Mn-MOFs (with no platform capacity). This helps to reduce safety hazards during the fast-charging process and demonstrates its great application value in the fields of fast-charging sodium-ion batteries and capacitors. Our research findings have broken the barriers to the application of non-conductive MOFs as energy storage materials, enhanced the understanding of the regulation of platform capacity and voltage, and paved the way for the realization of high-security sodium-ion fast-charging devices.

Promising CO2 Capture and Effective Iodine Adsorption of Hyper-Cross-Linked Conjugated Porous Organic Polymers Prepared from a Cyclopentannulation Reaction

Three novel conjugated porous organic polymers, denoted as C-POP1-3 and which consist of alternating pyrene cores with various contorted fluorene surrogates, were successfully synthesized from a versatile one-pot palladium-catalyzed [3+2] cyclocondensation reaction. The resulting polymers were obtained in excellent yields and displayed weight-average molecular weights (Mw) ranging from 12.2 to 20.2 kg/mol with polydispersity indices (Mw/Mn) ranging between 1.8 and 2.4, suggesting that the molecular masses are narrowly distributed and thus implying homogeneous polymer chains. Thermal stability exploration of C-POP1-3 by thermogravimetric analysis (TGA) revealed an impressive robustness with a 10% weight reduction temperature attaining 485 °C. Investigation of the inherent microporosity properties of C-POP1-3 via nitrogen adsorption experiments using Brunauer-Emmett-Teller (BET) theory discloses their surface areas which reach up to 560 m2 g-1 and pore volumes averaging 0.47 cm3 g-1. The target conjugated polymers were explored as adsorbents disclosing a maximum carbon dioxide adsorption of 83.0 mg g-1 at 273 K and low pressure for C-POP1, whereas iodine sorption tests portrayed prominent outcomes, notably for C-POP3 which proved to owe a strong affinity toward the hitherto mentioned halogen by achieving a maximum adsorption of 2220 mg g-1. Additionally, recyclability experiments confirmed the possibility to regenerate the polymers' adsorption capabilities even after seven consecutive cycles of adsorption-desorption cycles, which qualify them as auspicious iodine adsorbents.

Defect-Modulated MOF Nanochannels for the Quasi-Solid-State Electrolyte of a Dendrite-Free Lithium Metal Battery

Efficient and selective Li+ transport within the nanochannel is essential for high-performance solid-state electrolytes (SSEs) in lithium metal batteries. Introducing Li+ hopping sites into SSEs shows great potential for promoting Li+ transport; however, it typically reduces the Li+ transport nanochannel size, consequently increasing the energy barrier for Li+ transport. Herein, we present a molecular defect strategy for MOFs to introduce Li+ hopping sites and increase the nanochannel size simultaneously as quasi-solid-state electrolytes (QSSEs). Compared with the defect-free Li@UiO-66-based QSSE, the optimized Li@UiO-66-D2-based QSSE exhibits a remarkable 343% enhancement in Li+ conductivity and improved Li+ selectivity. Furthermore, the 9 cm × 6 cm Li|Li@UiO-66-D2|LFP pouch cell exhibits excellent cycling performance with high capacity retention. An in-depth mechanism study has unveiled the significant impact of both hopping sites and nanochannel size on Li+ transport, emphasizing the importance of a molecular defect strategy in enhancing the overall Li+ transport performance of MOF-based QSSEs.

A magnetic dual-aptamer electrochemical sensor with MOF-on-MOF-derived electrocatalyst as a signal amplifier for sensitive detection of cardiac troponin I

Considering the close association between cardiac troponin I (cTnI) level and various cardiovascular diseases, it becomes essential to explore sensitive and accurate detection methods for monitoring their levels in the early stages of disease. In this work, a magnetic dual-aptamer electrochemical sensor for cTnI detection was constructed in the first utilizing MOF-on-MOF-derived electrocatalyst as a signal amplifier in collaboration with high-efficient separation of magnetic beads (MBs). Employing zeolitic imidazolate framework-67 (ZIF-67) with high surface area as host MOF, MOF-on-MOF heterostructure (ZIF-67@PBA) was facilely prepared by in-situ growth of conductive prussian blue analogue (PBA) as guest MOF onto the surface of ZIF-67 with a simple ion-exchange method. After low-temperature calcination, N doped derived electrocatalyst (N-ZIF-67@PBA) was obtained with intact skeletons and pore structures of MOFs. This not only integrated bimetallic active centers with various valence states and diversiform nanostructures of dual MOF, but endowed N-ZIF-67@PBA 8.3-fold increase of electrocatalytic activity for catalytic amplification. Further using aptamer-modified MBs as capture carriers for recognizing and separating cTnI from complex samples with high specificity, the magnetic dual-aptamer sensor successfully achieved the sensitive detection of cTnI with a low detection limit of 0.31 fg/mL. This work provided a new viewpoint on the use of MOF-on-MOF-derived electrocatalyst for ultrasensitive electrochemical sensing analysis.

Defect Engineering of Metal-Based Atomically Thin Materials for Catalyzing Small-Molecule Conversion Reactions

Recently, metal-based atomically thin materials (M-ATMs) have experienced rapid development due to their large specific surface areas, abundant electrochemically accessible sites, attractive surface chemistry, and strong in-plane chemical bonds. These characteristics make them highly desirable for energy-related conversion reactions. However, the insufficient active sites and slow reaction kinetics leading to unsatisfactory electrocatalytic performance limited their commercial application. To address these issues, defect engineering of M-ATMs has emerged to increase the active sites, modify the electronic structure, and enhance the catalytic reactivity and stability. This review provides a comprehensive summary of defect engineering strategies for M-ATM nanostructures, including vacancy creation, heteroatom doping, amorphous phase/grain boundary generation, and heterointerface construction. Introducing recent advancements in the application of M-ATMs in electrochemical small molecule conversion reactions (e.g., hydrogen, oxygen, carbon dioxide, nitrogen, and sulfur), which can contribute to a circular economy by recycling molecules like H2, O2, CO2, N2, and S. Furthermore, a crucial link between the reconstruction of atomic-level structure and catalytic activity via analyzing the dynamic evolution of M-ATMs during the reaction process is established. The review also outlines the challenges and prospects associated with M-ATM-based catalysts to inspire further research efforts in developing high-performance M-ATMs.

Bimetallic metal-organic frameworks as electrode modifiers for enhanced electrochemical sensing of chloramphenicol

An electrochemical sensor is presented for the detection of the chloramphenicol (CAP) based on a bimetallic MIL-101(Fe/Co) MOF electrocatalyst. The MIL-101(Fe/Co) was prepared by utilizing mixed-valence Fe (III) and Co (II) as metal nodes and terephthalic acid as ligands with a simple hydrothermal method and characterized by SEM, TEM, XRD, FTIR, and XPS. Electrochemical measurements such as electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and differential pulse voltammetry (DPV) showed that bimetallic MIL-101(Fe/Co) had the faster electron transfer, larger electroactive area, and higher electrocatalytic activity compared with  their monometallic counterparts due to the strong synergistic effect between bimetals. Inspired by these results, the MIL-101(Fe/Co)-based sensor was used to detect CAP. Some experiment parameters of pH, Fe and Co molar ratio, MIL-101(Fe/Co) volume, and DPV quiet time were optimized. The direct reduction mechanism of CAP was verified to involve four electrons and four protons process. Finally, the sensitive and selective CAP detection in the concentration range 1 to 200 μM with a detection limit of 0.3 μM was realized by the proposed sensor. The satisfactory recoveries in tap water and lake water indicated the practicability of the proposed electrochemical sensor. It is expected that this work may open up a paradigm for the preparation of MOF-based electrode modifiers with desired electrocatalytic performance for environmental pollution monitoring.

"One-Stone, Two-Birds": Zinc-Rich Metal-Organic Frameworks as Precursors for High-Entropy Zn-Air Battery Electrocatalysts with Hierarchical Pore Structures

The active sites of inexpensive transition metal electrocatalysts are sparse and singular, thus high-entropy alloys composed of non-precious metals have attracted considerable attention due to their multi-component synergistic effects. However, the facile synthesis of high-entropy alloy composites remains a challenge. Herein, we report a "one-stone, two-birds" method utilizing zinc (Zn)-rich metal-organic frameworks as precursors, by virtue of the low boiling point of Zn (907 °C) and its high volatility in alloys, high-entropy alloy carbon nanocomposite with a layered pore structure was ultimately synthesized. The experimental results demonstrate that the volatilization of zinc can prevent metal agglomeration and contribute to the formation of uniformly dispersed high-entropy alloy nanoparticles at slower pyrolysis and cooling rates. Simultaneously, the volatilization of Zn plays a crucial role in creating the hierarchically porous structure. Compared to the zinc-free HEA/NC-1, the HEA/NC-5 derived from the precursor containing 0.8 Zn exhibit massive micropores and mesopores. The resulting nanocomposites represent a synergistic effect between highly dispersed metal catalytic centers and hierarchical adsorption sites, thus achieving excellent electrocatalytic oxygen reduction performance with low catalyst loading compared to commercial Pt/C. This convenient zinc-rich precursor method can be extended to the production of more high-entropy alloys and various application fields.

Atomically Fe(Ⅲ) anchored metal-organic frameworks-based fluorescent nanozyme for smartphone-adopted chemiluminescence-fluorescence dual-mode analysis of Uric acid

BACKGROUND

Chemiluminescence (CL) analysis is a promising analytical method with advantages including easy operation, high sensitivity and simple instrument. However, the single CL mode usually suffered from poor stability and reproducibility as a result of the flash-type nature of luminescent molecules, leading to false positive or negative results in practical applications. Dual-mode detection is an advanced sensing methodology that identifies analytes through independent output signals. This approach has the ability to circumvent the inherent constraints of individual sensing modes while integrating their respective strengths, thereby yielding a synergistic enhancement in the detection system.

RESULTS

Herein, a chemiluminescence-fluorescence (FL) dual-mode analysis and imaging system is designed by constructing an atomically Fe(Ⅲ) anchored PCN-224 peroxidase-mimicking nanozyme (PCN-224/Fe(Ⅲ)) and achieve an ultrasensitive detection of Uric Acid (UA). The multifunctional PCN-224/Fe(Ⅲ) serves as a high-efficiency co-reaction promoter in the generation of reactive oxygen species (ROS) in both the CL and FL system, while also demonstrating exceptional capabilities as fluorescent nanoprobes. Ultimately, a smartphone-adopted CL imaging device was developed to achieve a visual CL detection through the design of portable paper-based chips. Besides, with the assistance of the TMB-mediated fluorescence energy resonance transfer, the fluorescent PCN-224/Fe(Ⅲ) nanoprobes exhibited good fluorescence detection performance for UA. The limit of detection was achieved as low as 2.45 × 10-10 M and 1.99 × 10-9 M in the CL and FL mode, respectively.

SIGNIFICANCE

This study engineered an atomically Fe(Ⅲ)- MOF-based multifunctional nanozyme and developed an innovative approach for creating CL-FL dual-mode analysis and imaging detection for UA. The proposed CL-FL dual-mode detection system not only provided a portable and sensitive method for UA detection but also offered valuable insights into the mechanism of the co-reaction promoter enhanced CL and FL analysis.

Bioinspired Molecular Scalpel for Two-Dimensional Metal-Organic Nanosheet: Design Strategies and Recent Progress

Ultrathin two-dimensional (2D) metal-organic nanosheets (MONs) have attracted continued attention in the field of advanced functional materials. Their nanoscale thickness, high surface-to-volume ratio, and abundant accessible active sites, are superior advantages compared with their 3D bulk counterparts. Bioinspired molecular scalpel strategy is a promising method for the creation of 2D MONs, and may solve the current shortcomings of MONs synthesis. This review aims to provide a state-of-the-art overview of molecular scalpel strategies and share the results of current development to provide a better solution for MONs synthesis. Different types of molecular scalpel strategies have been systematically summarized. Both mechanisms, advantages and limitations of multiform molecular scalpel strategies have been discussed. Besides, the challenges to be overcome and the question to be solved are also introduced.

Multimaterial Digital-Light Processing of Metal-Organic Framework (MOF) Composites: A Versatile Tool for the Rapid Microfabrication of MOF-Based Devices

Patterning Metal-Organic Frameworks (MOFs) is essential for their use in sensing, electronics, photonics, and encryption technologies. However, current lithography methods are limited in their ability to pattern more than two MOFs, hindering the potential for creating advanced multifunctional surfaces. Additionally, balancing design flexibility, simplicity, and cost often results in compromises. This study addresses these challenges by combining Digital-Light Processing (DLP) with a capillary-assisted stop-flow system to enable multimaterial MOF patterning. It demonstrates the desktop fabrication of multiplexed arbitrary micropatterns across cm-scale areas while preserving the MOF's pore accessibility. The ink, consisting of a MOF crystal suspension in a low volatile solvent, a mixture of high molecular weight oligomers, and a photoinitiator, is confined by capillarity in the DLP projection area and quickly exchanged using syringe pumps. The versatility of this method is demonstrated by the direct printing of a ZIF-8-based luminescent oxygen sensor, a 5-component dynamic information concealment method, and a PCN-224-based colorimetric sensor for amines, covering disparate pore and analyte sizes. The multi-MOF capabilities, simplicity, and accessibility of this strategy pave the way for the facile exploration of MOF materials across a wide range of applications, with the potential to significantly accelerate the design-to-application cycle of MOF-based devices.

Scalable Production of Functional Fibers with Nanoscale Features for Smart Textiles

Functional fibers, retaining nanoscale characteristics or nanomaterial properties, represent a significant advance in nanotechnology. Notably, the combination of scalable manufacturing with cutting-edge nanotechnology further expands their utility across numerous disciplines. Manufacturing kilometer-scale functional fibers with nanoscale properties are critical to the evolution of smart textiles, wearable electronics, and beyond. This review discusses their design principles, manufacturing technologies, and key advancements in the mass production of such fibers. In addition, it summarizes the current applications and state of progress in scalable fiber technologies and provides guidance for future advances in multifunctional smart textiles, by highlighting the upcoming impending demands for evolving nanotechnology. Challenges and directions requiring sustained effort are also discussed, including material selection, device design, large-scale manufacturing, and multifunctional integration. With advances in functional fibers and nanotechnology in large-scale production, wearable electronics, and smart textiles could potentially enhance human-machine interaction and healthcare applications.

Structural engineering in hierarchical nanoarchitectures of metal-organic frameworks and their derivatives

Metal-organic frameworks (MOFs) have attracted much attention owing to their tuneable structures, high surface areas, and good functionalization. Nanoreactors derived from various MOFs are now widely used in heterogeneous catalysis, electrocatalysis and photocatalysis. The nanoarchitectures of MOFs and their derivatives have a great impact on mass and energy transfer pathways, thus affecting the activity and selectivity of the catalysts. In this review, we intend to provide a universal survey of reported methods to synthesize MOF-based core-satellite, core-shell, yolk-shell and hollow-shell structures or their derivatives in recent years and present a continuous evolution among them. We hope that this review could provide some perspectives for exploring new facile methods to prepare different hierarchical nanoarchitectures of MOFs or their derivatives.

Ionic liquids intercalation in titanium carbide MXenes: A first-principles investigation

Herein, we present a density functional theory with dispersion correction (DFT-D) calculations that focus on the intercalation of ionic liquids (ILs) electrolytes into the two-dimensional (2D) Ti3C2Tx MXenes. These ILs include the cation 1-ethyl-3-methylimidazolium (Emim+), accompanied by three distinct anions: bis(trifluoromethylsulfonyl)imide (TFSA-), (fluorosulfonyl)imide (FSA-) and fluorosulfonyl(trifluoromethanesulfonyl)imide (FTFSA-). By altering the surface termination elements, we explore the intricate geometries of IL intercalation in neutral, negative, and positive pore systems. Accurate estimation of charge transfer is achieved through five population analysis models, such as Hirshfeld, Hirshfeld-I, DDEC6 (density derived electrostatic and chemical), Bader, and VDD (voronoi deformation density) charges. In this work, we recommend the DDEC6 and Hirshfeld-I charge models, as they offer moderate values and exhibit reasonable trends. The investigation, aimed at visualizing non-covalent interactions, elucidates the role of cation-MXene and anion-MXene interactions in governing the intercalation phenomenon of ionic liquids within MXenes. The magnitude of this role depends on two factors: the specific arrangement of the cation, and the nature of the anionic species involved in the process.

Unlocking Efficiency: Minimizing Energy Loss in Electrocatalysts for Water Splitting

Catalysts play a crucial role in water electrolysis by reducing the energy barriers for hydrogen and oxygen evolution reactions (HER and OER). Research aims to enhance the intrinsic activities of potential catalysts through material selection, microstructure design, and various engineering techniques. However, the energy consumption of catalysts has often been overlooked due to the intricate interplay among catalyst microstructure, dimensionality, catalyst-electrolyte-gas dynamics, surface chemistry, electron transport within electrodes, and electron transfer among electrode components. Efficient catalyst development for high-current-density applications is essential to meet the increasing demand for green hydrogen. This involves transforming catalysts with high intrinsic activities into electrodes capable of sustaining high current densities. This review focuses on current improvement strategies of mass exchange, charge transfer, and reducing electrode resistance to decrease energy consumption. It aims to bridge the gap between laboratory-developed, highly efficient catalysts and industrial applications regarding catalyst structural design, surface chemistry, and catalyst-electrode interplay, outlining the development roadmap of hierarchically structured electrode-based water electrolysis for minimizing energy loss in electrocatalysts for water splitting.

Metal-Organic Frameworks Derived Carbon-Supported Metal Electrocatalysts for Energy-Related Reduction Reactions

Electrochemical reduction reactions, as cathodic processes in many energy-related devices, significantly impact the overall efficiency determined mainly by the performance of electrocatalysts. Metal-organic frameworks (MOFs) derived carbon-supported metal materials have become one of star electrocatalysts due to their tunable structure and composition through ligand design and metal screening. However, for different electroreduction reactions, the required active metal species vary in phase component, electronic state, and catalytic center configuration, hence requiring effective customization. From this perspective, this review comprehensively analyzes the structural design principles, metal loading strategies, practical electroreduction performance, and complex catalytic mechanisms, thereby providing insights and guidance for the future rational design of such electroreduction catalysts.

Enhanced electrochemical performance with exceptional capacitive retention in Ce-Co MOFs/Ti3C2Tx nanocomposite for advanced supercapacitor applications

This study introduces a high-performance Ce-Co MOFs/Ti3C2Tx nanocomposite, synthesized via hydrothermal methods, designed to advance supercapacitor technology. The integration of Ce-Co metal-organic frameworks (MOFs) with Ti3C2Tx (Mxene) yields a composite that exhibits superior electrochemical properties. Structural analyses, including X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM), confirm the successful formation of the composite, featuring well-defined rod-like Ce-Co MOFs and layered Ti3C2Tx sheets. Electrochemical evaluation highlights the exceptional performance of the Ce-Co MOFs/Ti3C2Tx nanocomposite, achieving a specific capacitance of 483.3 Fg⁻1 at 10 mVs⁻1, a notable enhancement over the 200 Fg⁻1 of Ce-Co MOFs. It also delivers a high energy density of 78.48 Whkg⁻1 compared to 19 Whkg⁻1 for Ce-Co MOFs. Remarkably, the nanocomposite shows outstanding cyclic stability with a capacitance retention of 109 % after 4000 cycles and electrochemical surface area (ECSA) of 845 cm2, coupled with a reduced charge transfer resistance (Rct) of 2.601 Ω and an equivalent series resistance (ESR) of 0.8 Ω. These findings demonstrate that the Ce-Co MOFs/Ti3C2Tx nanocomposite is a groundbreaking material, offering enhanced energy storage, conductivity, and durability, positioning it as a leading candidate for next-generation supercapacitors.

Hybrid supercapacitors using metal-organic framework derived nickel-sulfur compounds

HYPOTHESIS

Metal-organic frameworks (MOFs) are highly suitable precursors for supercapacitor electrode materials owing to their high porosity and stable backbone structures that offer several advantages for redox reactions and rapid ion transport.

EXPERIMENTS

In this study, a carbon-coated Ni9S8 composite (Ni9S8@C-5) was prepared via sulfuration at 500 ℃ using a spherical Ni-MOF as the sacrificial template.

FINDING

The stable carbon skeleton derived from Ni-MOF and positive structure-activity relationship due to the multinuclear Ni9S8 components resulted in a specific capacity of 278.06 mAh·g-1 at 1 A·g-1. Additionally, the hybrid supercapacitor (HSC) constructed using Ni9S8@C-5 as the positive electrode and the laboratory-prepared coal pitch-based activated carbon (CTP-AC) as the negative electrode achieved an energy density of 69.32 Wh·kg-1 at a power density of 800.06 W·kg-1, and capacity retention of 83.06 % after 5000 cycles of charging and discharging at 5 A·g-1. The Ni-MOF sacrificial template method proposed in this study effectively addresses the challenges associated with structural collapse and agglomeration of Ni9S8 during electrochemical reactions, thus improving its electrochemical performance. Hence, a simple preparation method is demonstrated, with broad application prospects in supercapacitor electrodes.

MOFs-Based Materials with Confined Space: Opportunities and Challenges for Energy and Catalytic Conversion

Metal-Organic Frameworks (MOFs) are a very promising material in the fields of energy and catalysis due to their rich active sites, tunable pore size, structural adaptability, and high specific surface area. The concepts of "carbon peak" and "carbon neutrality" have opened up huge development opportunities in the fields of energy storage, energy conversion, and catalysis, and have made significant progress and breakthroughs. In recent years, people have shown great interest in the development of MOFs materials and their applications in the above research fields. This review introduces the design strategies and latest progress of MOFs are included based on their structures such as core-shell, yolk-shell, multi-shelled, sandwich structures, unique crystal surface exposures, and MOF-derived nanomaterials in detail. This work comprehensively and systematically reviews the applications of MOF-based materials in energy and catalysis and reviews the research progress of MOF materials for atmospheric water harvesting, seawater uranium extraction, and triboelectric nanogenerators. Finally, this review looks forward to the challenges and opportunities of controlling the synthesis of MOFs through low-cost, improved conductivity, high-temperature heat resistance, and integration with machine learning. This review provides useful references for promoting the application of MOFs-based materials in the aforementioned fields.

Disulfide Bonds as Functional Tethers in Metal-Organic Frameworks

The functionality of metal-organic frameworks (MOFs) is often encoded by specific chemical moieties found within these architectures. As such, new techniques to install increasingly more complex functionalities in MOFs are regularly being reported in the literature. One such functional group is the disulfide bond. The redox behavior of this covalent linkage renders MOFs responsive to stimuli, often under reducing conditions. Here, we review examples in which disulfide-containing MOFs are deployed in applications including drug delivery, therapeutic ferroptosis, exfoliation, energy storage, sensing, and others.

ZIF-8-Based Nitrogen and Monoatomic Metal Co-Doped Pyrolytic Porous Carbon for High-Performance Supercapacitor Applications

Metal-organic frameworks (MOFs) receive wide attention owing to their high specific surface area, porosity, and structural designability. In this paper, ZC-Ru and ZC-Cu electrodes loaded with monatomic Ru and Cu doped with nitrogen were prepared by pyrolysis, ion impregnation, and carbonization process using ZIF-8 synthesized by static precipitation as a precursor. ZC-Cu has a high specific surface area of 859.78 m2 g-1 and abundant heteroatoms O (10.04%) and N (13.9%), showing the specific capacitance of 222.21 F g-1 at 0.1 A g-1 in three-electrode system, and low equivalent series resistance (Rct: 0.13 Ω), indicating excellent energy storage capacity and electrical conductivity. After 10,000 cycles at 1 A g-1 in 6 M KOH electrolyte, it still has an outstanding capacitance retention of 99.42%. Notably, symmetric supercapacitors ZC-Cu//ZC-Cu achieved the maximum power density and energy density of 485.12 W·kg-1 and 1.61 Wh·kg-1, respectively, positioning ZC-Cu among the forefront of previously known MOF-based electrode materials. This work demonstrates the enormous potential of ZC-Cu in the supercapacitor industry and provides a facile approach to the treatment of transition metal.

Recent Development on Transition Metal Oxides-Based Core-Shell Structures for Boosted Energy Density Supercapacitors

In recent years, nanomaterials exploration and synthesis have played a crucial role in advancing energy storage research, particularly in supercapacitor development. Researchers have diversified materials, including metal oxides, chalcogenides, and composites, as well as carbon materials, to enhance energy and power density. Balancing energy density with electrochemical stability remains challenging, driving intensified efforts in advancing electrode materials. This review focuses on recent progress in designing and synthesizing core-shell materials tailored for supercapacitors. The core-shell architecture offers advantages such as increased surface area, redox active sites, electrical conductivity, ion diffusion kinetics, specific capacitance, and cyclability. The review explores the impact of core and shell materials, specifically transition metal oxides (TMOs), on supercapacitor electrochemical behavior. Metal oxide choices, such as cobalt oxide as a preferred core and manganese oxide as a shell, are discussed. The review also highlights characterization techniques for assessing structural, morphological, and electrochemical properties of core-shell materials. Overall, it provides a comprehensive overview of ongoing TMOs-based core-shell material research for supercapacitors, showcasing their potential to enhance energy storage for applications ranging from gadgets to electric vehicles. The review outlines existing challenges and future opportunities in evolving TMOs-based core-shell materials for supercapacitor advancements, holding promise for high-efficiency energy storage devices.

Unique Hierarchically Structured High-Entropy Alloys with Multiple Adsorption Sites for Rechargeable Li-CO2 Batteries with High Capacity

Lithium-carbon dioxide (Li-CO2) batteries offer the possibility of synchronous implementation of carbon neutrality and the development of advanced energy storage devices. The exploration of low-cost and efficient cathode catalysts is key to the improvement of Li-CO2 batteries. Herein, high-entropy alloys (HEAs)@C hierarchical nanosheet is synthesized from the simulation of the recycling solution of waste batteries to construct a cathode for the first time. Owing to the excellent electrical conductivity of the carbon material, the unique high-entropy effect of the HEAs, and the large number of catalytically active sites exposed by the hierarchical structure, the FeCoNiMnCuAl@C-based battery exhibits a superior discharge capability of 27664 mAh g-1 and outstanding durability of 134 cycles as well as low overpotential with 1.05 V at a discharge/recharge rate of 100 mA g-1. The adsorption capacity of different sites on the HEAs is deeply understood through density functional theory calculations combined with experiments. This work opens up the application of HEAs in Li-CO2 batteries catalytic cathodes and provides unique insights into the study of adsorption active sites in HEAs.

Enhanced Free Li-Ion Mobility in Solid-State Electrolytes via Long-Range Assembly of Porous Materials

Metal-organic frameworks (MOFs), with their tunable pore sizes and high surface areas, are gaining prominence in Li metal battery applications, including their use as nanofillers in solid composite electrolytes (SCEs) for enhanced ionic conductivity. Yet, when used in SCEs, individual dispersed MOF particles in isolation as nanofillers can impede efficient ion transport in all-solid-state batteries due to the insufficient supply of ionic transport pathways within SCEs. Here, we introduced a continuous SCE nanofiller with long-range assembly interconnected porous MOFs (IMOF_SCE) for effective ion transport pathway supply along the interface between the nanofiller and the polymer matrix. IMOF_SCE achieved Li-ion conductivity (6.72 × 10-5 S cm-1 at 20 °C) and Li-ion transference number (tLi+ = 0.855), resulting in the improved electrochemical performance of Li metal batteries. Additionally, the Li/LiFePO4 full cell integrated with IMOF_SCE achieved an outstanding stable capacity retention of 98.8% in 300 cycles. This work offers insights into the design strategy of effective nanofillers for SCEs and can be adapted for other porous materials.

Avoiding the Kinetic Inertness of Chromium Ions Using a Coordination Substitution Strategy for the Rapid Synthesis of Chromium-Based Metal-Organic Frameworks

Chromium-based metal-organic frameworks (Cr-MOFs) are very attractive in a wide range of applications due to their robustness and high porosity. However, the kinetic inertness of chromium ions results in the synthesis of Cr-MOFs often taking prolonged reaction times, which limit their industrial applications. Herein, we report a novel synthesis strategy based on coordination substitution, which overcomes the kinetic inertness of chromium ions and can synthesize Cr-MOFs in a shorter time. The versatility of this strategy has been demonstrated by producing several known Cr-MOFs, such as TYUT-96Cr, MIL-100Cr, MIL-101Cr, and MIL-53Cr. PXRD, SEM, TEM, 77 K N2 adsorption, and TGA have proved that the Cr-MOFs synthesized using this new strategy have good crystallinity, high porosity, and excellent thermal stability. The synthesis mechanism was investigated using theoretical calculations.

Carbon nanotube-encapsulated Co/Co3Fe7 heterojunctions as a highly-efficient bifunctional electrocatalyst for rechargeable zinc-air batteries

In oxygen electrocatalysis, how to rationally design low-cost catalysts with reasonable structure and long-term stability is a crucial issue. Here, an in-situ growth strategy is used to construct a shaped structure encapsulating a uniformly-dispersed Co/Co3Fe7 heterojunction in nitrogen-doped carbon nanotubes (Co/Co3Fe7@NCNTs). Hollow CoFe layered-double-hydroxide prisms act as sacrifices for in-situ growth of Co/Co3Fe7 nanoparticles, which also catalyze the growth of bamboo-like NCNTs. Tubular structure not only accelerates the charge transfer through the interactions between Co and Co3Fe7, but also limits the aggregation of the particles, thereby promoting the 4e- oxygen reduction/evolution reactions (ORR/OER) kinetics and stabilizing the bifunctional activity. Co/Co3Fe7@NCNTs-800 (pyrolyzed at 800 °C) shows exceptional ORR activity (half-wave potential of 0.89 V) and methanol tolerance. Meanwhile, Co/Co3Fe7@NCNTs-800 shows a small OER overpotential of 280 mV, which increases by only 9 mV after 1000 cyclic voltammetry (CV) cycles. The outstanding bifunctionality (potential gap of 0.62 V) is ascribed to the electronic structure modulation at the Co/Co3Fe7 heterointerface. Notably, it also has a high performance as an air-cathode for rechargeable zinc-air battery, showing high power density (165 mW cm-2) and specific capacity (770.5 m Ah kg-1). This work provides a new reference for promoting the development of alloy catalysts with heterogeneous interfaces.

Ni Single Atom Decorated Porous Hollow Carbon Nanosphere-Based Electrodes for High Performance Symmetric Solid-State Supercapacitors

Ni single atom containing hollow carbon nanospheres with nitrogen doping has been synthesized by carbonization of Ni(NO3)2/phloroglucinol-formaldehyde polymer/silica composite. The samples have been characterized by powder X-ray diffraction, nitrogen adsorption/desorption, electron microscopic, Raman and X-ray photoelectron spectroscopic studies. The microstructure and surface area vary with the amount of Ni(NO3)2 employed in the syntheses and the carbonization environment. An optimized amount of nickel and argon as the carbonization gas afford Ni-1.0@N@HCN-Ar which possesses overall superior features. The uniformly dispersed Ni single atoms within the hollow porous carbon framework fully utilize all the electroactive sites thereby improving the supercapacitive performance. The specific capacitance of Ni-1.0@N@HCN-Ar reaches 777 F g-1 at 1 A g-1 with a Coulombic efficiency of 98.4 % and excellent recyclability. The energy and power density of Ni-1.0@N@HCN-Ar are found to be high; at 1 A g-1 its energy density is 155.4 Wh kg-1 with a power density of 600.3 W kg-1. At a high current density of 10 A g-1 the material shows a high energy density of 118.4 Wh kg-1 with excellent power density of 6003.4 W kg-1. A symmetric solid-state supercapacitor assembled with this material, Ni-1.0@N@HCN-Ar//Ni-1.0@N@HCN-Ar using H2SO4/PVA gel electrolyte shows a superior energy density value of 30 Wh kg-1 at a power density of 1200 W kg-1.

Novel ZIFs nanostructures electro-engineered at carbon fiber for the highly sensitive and selective detection of isoeugenol

Novel zeolitic imidazolate frameworks (ZIFs), classical subtypes of metal organic frameworks (MOFs), and nanostructures are electro-engineered onto carbon fiber (CF), leading to a unique freestanding electrochemical platform of budlike nano Zn-ZIFs decorated CF (BN-Zn-ZIFs/CF). The unique morphology, structure, and composition are characterized by electron microscopy and energy spectrum analysis. Notably, the BN-Zn-ZIFs/CF platform displays superb electrocatalysis towards the oxidation of isoeugenol with encouragingly low overpotential and high current response. The strong electrocatalytic oxidation capability of BN-Zn-ZIFs/CF makes it an excellent sensing platform for isoeugenol detection. BN-Zn-ZIFs/CF sensor exhibits high-performance isoeugenol sensing with an extremely low limit of detection (13 nM) and wide detection range (0.1-700 µM). Besides, the BN-Zn-ZIFs/CF sensor can greatly resist interference from common ions, major biomolecules, and some amino acids. Moreover, excellent reliability, stability, and practicality are obtained. Our work demonstrates that the as-prepared BN-Zn-ZIFs/CF can act as an high-performance electrochemical sensor for the isoeugenol detection, the well-developed ZIF nanocrystal-modified conductive substrates can be a unique platform for the efficient sensing of other molecules, and the electrochemical engineering strategy can be an effective method for the growing of fresh MOF nanocrystals at conductive substrates in various electrochemical applications.

Recent development and applications of differential electrochemical mass spectrometry in emerging energy conversion and storage solutions

Electrochemical energy conversion and storage are playing an increasingly important role in shaping the sustainable future. Differential electrochemical mass spectrometry (DEMS) offers an operando and cost-effective tool to monitor the evolution of gaseous/volatile intermediates and products during these processes. It can deliver potential-, time-, mass- and space-resolved signals which facilitate the understanding of reaction kinetics. In this review, we show the latest developments and applications of DEMS in various energy-related electrochemical reactions from three distinct perspectives. (I) What is DEMS addresses the working principles and key components of DEMS, highlighting the new and distinct instrumental configurations for different applications. (II) How to use DEMS tackles practical matters including the electrochemical test protocols, quantification of both potential and mass signals, and error analysis. (III) Where to apply DEMS is the focus of this review, dealing with concrete examples and unique values of DEMS studies in both energy conversion applications (CO2 reduction, water electrolysis, carbon corrosion, N-related catalysis, electrosynthesis, fuel cells, photo-electrocatalysis and beyond) and energy storage applications (Li-ion batteries and beyond, metal-air batteries, supercapacitors and flow batteries). The recent development of DEMS-hyphenated techniques and the outlook of the DEMS technique are discussed at the end. As DEMS celebrates its 40th anniversary in 2024, we hope this review can offer electrochemistry researchers a comprehensive understanding of the latest developments of DEMS and will inspire them to tackle emerging scientific questions using DEMS.

Emerging Doped Metal-Organic Frameworks: Recent Progress in Synthesis, Applications, and First-Principles Calculations

Metal-organic frameworks (MOFs) are crystalline porous materials with a long-range ordered structure and excellent specific surface area and have found a wide range of applications in diverse fields, such as catalysis, energy storage, sensing, and biomedicine. However, their poor electrical conductivity and chemical stability, low capacity, and weak adhesion to substrates have greatly limited their performance. Doping has emerged as a unique strategy to mitigate the issues. In this review, the concept, classification, and characterization methods of doped MOFs are first introduced, and recent progress in the synthesis and applications of doped MOFs, as well as the rapid advancements and applications of first-principles calculations based on the density functional theory (DFT) in unraveling the mechanistic origin of the enhanced performance are summarized. Finally, a perspective is included to highlight the key challenges in doping MOF materials and an outlook is provided on future research directions.

Hierarchically Ordered Pore Engineering of Metal-Organic Framework-Based Materials for Electrocatalysis

Ordered pore engineering that embeds uniform pores with periodic alignment in electrocatalysts opens up a new avenue for achieving further performance promotion. Hierarchically ordered porous metal-organic frameworks (HOP-MOFs) possessing multilevel pores with ordered distribution are the promising precursors for the exploration of ordered porous electrocatalysts, while the scalable acquisition of HOP-MOFs with editable components and adjustable pore size regimes is critical. This review presents recent progress on hierarchically ordered pore engineering of MOF-based materials for enhanced electrocatalysis. The synthetic strategies of HOP-MOFs with different pore size regimes, including the self-assembly guided by reticular chemistry, surfactant, nanoemulsion, and nanocasting, are first introduced. Then the applications of HOP-MOFs as the precursors for exploring hierarchically ordered porous electrocatalysts are summarized, selecting representatives to highlight the boosted performance. Especially, the intensification of molecule and ion transport integrated with optimized electron transfer and site exposure over the hierarchically ordered porous derivatives are emphasized to clarify the directional transfer and integration effect endowed by ordered pore engineering. Finally, the remaining scientific challenges and an outlook of this field are proposed. It is hoped that this review will guide the hierarchically ordered pore engineering of nanocatalysts for boosting the catalytic performance and promoting the practical applications.

Direct Z-scheme system of UiO-66 cubes wrapped with Zn0.5Cd0.5S nanoparticles for photocatalytic hydrogen generation synchronized with organic pollutant degradation

Optimized fabrication of Z-scheme photocatalyst based on MOF materials offers sustainable energy generation and environmental improvement due to their attractive properties. The Z-scheme heterojunctions consisting of UiO-66 cubes covered with Zn0.5Cd0.5S nanoparticles were fabricated by a facile solvothermal method. Thanks to the Z-scheme carrier transport under simulated sunlight irradiation, UiO-66@Zn0.5Cd0.5S exhibited enhanced photocatalytic performance of H2 generation synchronized with organic pollutant degradation in fluoroquinolone antibiotic wastewater. Synergistically, the highest comprehensive performance was obtained in ciprofloxacin solution. The H2 yield reached 224 μmol∙ g-1∙ h-1 and simultaneously the removal efficiency was up to 83.6 %. The degradation pathways revealed that the process of piperazine ring cleavage and decarboxylation also generates H protons, further promoting the production of H2. Therefore, the effective spatial separation and transfer of the photoinduced carriers are attributed to the good band structure, large specific surface area, and cooperative reduction and oxidation reactions of UiO-66@Zn0.5Cd0.5S, resulting in significant photocatalytic activity. The toxicity assessment of antibiotics and intermediate products during the photocatalytic reaction also verifies the reduction of environmental risk. This study highlights a promising way to expand the application of the MOFs-based photocatalyst in clean energy conversion coupling with water remediation.

Ultrafast and Durable Sodium-Ion Storage of Pseudocapacitive VN@C Hybrid Nanorods from Metal-Organic Framework

Vanadium nitride (VN) is a promising electrode material for sodium-ion storage due to its multivalent states and high electrical conductivity. However, its electrochemical performance has not been fully explored and the storage mechanism remains to be clarified up to date. Here, the possibility of VN/carbon hybrid nanorods synthesized from a metal-organic framework for ultrafast and durable sodium-ion storage is demonstrated. The VN/carbon electrode delivers a high specific capacity (352 mA h g-1), fast-charging capability (within 47.5 s), and ultralong cycling stability (10 000 cycles) for sodium-ion storage. In situ XRD characterization and density functional theory (DFT) calculations reveal that surface-redox reactions at vanadium sites are the dominant sodium-ion storage mechanism. An energy-power balanced hybrid capacitor device is verified by assembling the VN/carbon anode and active carbon cathode, and it shows a maximum energy density of 103 Wh kg-1 at a power density of 113 W kg-1.

Interfacial Electronic Interactions Between Ultrathin NiFe-MOF Nanosheets and Ir Nanoparticles Heterojunctions Leading to Efficient Overall Water Splitting

Creating specific noble metal/metal-organic framework (MOF) heterojunction nanostructures represents an effective strategy to promote water electrolysis but remains rather challenging. Herein, a heterojunction electrocatalyst is developed by growing Ir nanoparticles on ultrathin NiFe-MOF nanosheets supported by nickel foam (NF) via a readily accessible solvothermal approach and subsequent redox strategy. Because of the electronic interactions between Ir nanoparticles and NiFe-MOF nanosheets, the optimized Ir@NiFe-MOF/NF catalyst exhibits exceptional bifunctional performance for the hydrogen evolution reaction (HER) (η10 = 15 mV, η denotes the overpotential) and oxygen evolution reaction (OER) (η10 = 213 mV) in 1.0 m KOH solution, superior to commercial and recently reported electrocatalysts. Density functional theory calculations are used to further investigate the electronic interactions between Ir nanoparticles and NiFe-MOF nanosheets, shedding light on the mechanisms behind the enhanced HER and OER performance. This work details a promising approach for the design and development of efficient electrocatalysts for overall water splitting.

Flexible and Free-Standing Metal-Organic Framework Nanowire Paper

Beyond traditional paper, multifunctional nanopaper has received much attention in recent years. Currently, many nanomaterials have been successfully used as building units of nanopaper. However, it remains a great challenge to prepare flexible and freestanding metal-organic framework (MOF) nanopaper owing to the low aspect ratio and brittleness of MOF nanocrystals. Herein, this work develops a flexible and free-standing MOF nanopaper with MOF nanowires as building units. The manganese-based MOF (Mn-MOF) nanowires with lengths up to 100 μm are synthesized by a facile solvothermal method. Through a paper-making technique, the Mn-MOF nanowires interweave with each other to form a three-dimensional architecture, thus creating a flexible and free-standing Mn-MOF nanowire paper. Furthermore, the surface properties can be engineered to obtain high hydrophobicity by modifying polydimethylsiloxane (PDMS) on the surfaces of the Mn-MOF nanowire paper. The water contact angle reaches 130°. As a proof of concept, this work presents two potential applications of the Mn-MOF/PDMS nanowire paper: (i) The as-prepared Mn-MOF/PDMS nanowire paper is compatible with a commercial printer. The as-printed colorful patterns are of high quality, and (ii) benefiting from the highly hydrophobic surfaces, the Mn-MOF/PDMS nanowire paper is able to efficiently separate oil from water.

Boosting Urea-Assisted Natural Seawater Electrolysis in 3D Leaf-Like Metal-Organic Framework Nanosheet Arrays Using Metal Node Engineering

Metal node engineering, which can optimize the electronic structure and modulate the composition of poor electrically conductive metal-organic frameworks, is of great interest for electrochemical natural seawater splitting. However, the mechanism underlying the influence of mixed-metal nodes on electrocatalytic activities is still ambiguous. Herein, a strategic design is comprehensively demonstrated in which mixed Ni and Co metal redox-active centers are uniformly distributed within NH2-Fe-MIL-101 to obtain a synergistic effect for the overall enhancement of electrocatalytic activities. Three-dimensional mixed metallic MOF nanosheet arrays, consisting of three different metal nodes, were in situ grown on Ni foam as a highly active and stable bifunctional catalyst for urea-assisted natural seawater splitting. A well-defined NH2-NiCoFe-MIL-101 reaches 1.5 A cm-2 at 360 mV for the oxygen evolution reaction (OER) and 0.6 A cm-2 at 295 mV for the hydrogen evolution reaction (HER) in freshwater, substantially higher than its bimetallic and monometallic counterparts. Moreover, the bifunctional NH2-NiCoFe-MIL-101 electrode exhibits eminent catalytic activity and stability in natural seawater-based electrolytes. Impressively, the two-electrode urea-assisted alkaline natural seawater electrolysis cell based on NH2-NiCoFe-MIL-101 needs only 1.56 mV to yield 100 mA cm-2, much lower than 1.78 V for alkaline natural seawater electrolysis cells and exhibits superior long-term stability at a current density of 80 mA cm-2 for 80 h.

Metal-organic framework (MOF)/C-dots and covalent organic framework (COF)/C-dots hybrid nanocomposites: Fabrications and applications in sensing, medical, environmental, and energy sectors

Developing new hybrid materials is critical for addressing the current needs of the world in various fields, such as energy, sensing, health, hygiene, and others. C-dots are a member of the carbon nanomaterial family with numerous applications. Aggregation is one of the barriers to the performance of C-dots, which causes luminescence quenching, surface area decreases, etc. To improve the performance of C-dots, numerous matrices including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and polymers have been composited with C-dots. The porous crystalline structures, which are constituents of metal nodes and organic linkers (MOFs) or covalently attached organic units (COFs) provide privileged features such as high specific surface area, tunable structures, and pore diameters, modifiable surface, high thermal, mechanical, and chemical stabilities. Also, the MOFs and COFs protect the C-dots from the environment. Therefore, MOF/C-dots and COF/C-dots composites combine their features while retaining topological properties and improving performances. In this review, we first compare MOFs with COFs as matrices for C-dots. Then, the recent progress in developing hybrid MOFs/C-dots and COFs/C-dots composites has been discussed and their applications in various fields have been explained briefly.

Advances in Mn-Based MOFs and Their Derivatives for High-Performance Supercapacitor

As the most widely used metal material in supercapacitors, manganese (Mn)-based materials possess the merits of high theoretical capacitance, stable structure as well as environmental friendliness. However, due to poor conductivity and easy accumulation, the practical capacitance of Mn-based materials is far lower than that of theoretical value. Therefore, accurate structural adjustment and controllable strategies are urgently needed to optimize the electrochemical properties of Mn-based materials. Metal-organic frameworks (MOFs) are porous materials with high specific surface area (SSA), tunable pore size, and controllable structure. These features make them attractive as precursors or scaffold for the synthesis of metal-based materials and composites, which are important for electrochemical energy storage applications. Therefore, a timely and comprehensive review on the classification, design, preparation and application of Mn-based MOFs and their derivatives for supercapacitors has been given in this paper. The recent advancement of Mn-based MOFs and their derivatives applied in supercapacitor electrodes are particularly highlighted. Finally, the challenges faced by Mn-MOFs and their derivatives for supercapacitors are summarized, and strategies to further improve their performance are proposed. The aspiration is that this review will serve as a beneficial compass, guiding the logical creation of Mn-based MOFs and their derivatives in the future.

NiCo-LDH coupled with 2D ZIF-derived Co nitrogen doped carbon nanosheet arrays as a self-supporting electrocatalyst for detection of formaldehyde

Formaldehyde is susceptible to illegal addition to foodstuffs to extend their shelf life due to its antimicrobial, preservative and bleaching properties. In this study, a self-supporting "nanosheet on nanosheet" arrays electrocatalyst with core-shell heterostructure was prepared in situ by coupling NiCo layer double hydroxide with 2D ZIF derived Co-nitrogen-doped porous carbon on carbon cloth (Co-N/C@NiCo-LDH NSAs/CC). Co-N/C nanosheet arrays act as a scaffold core with good electrical conductivity, providing more NiCo-LDH nucleation sites to avoid NiCo-LDH agglomeration, thus having fast mass/charge transfer performance. While the NiCo-LDH nanosheet arrays shell with high specific surface area provide more active sites for electrochemical reactions. As an electrocatalytic sensing electrode, Co-N/C@NiCo-LDH NSAs/CC has a wide linear range of 1 μM to 13 mM for formaldehyde detection, and the detection limit is 82 nM. Besides, the sensor has been applied to the detection of formaldehyde in food samples with satisfactory results.

Nanomedicine Targeting Myeloid-Derived Suppressor Cells Enhances Anti-Tumor Immunity

Cancer immunotherapy, a field within immunology that aims to enhance the host's anti-cancer immune response, frequently encounters challenges associated with suboptimal response rates. The presence of myeloid-derived suppressor cells (MDSCs), crucial constituents of the tumor microenvironment (TME), exacerbates this issue by fostering immunosuppression and impeding T cell differentiation and maturation. Consequently, targeting MDSCs has emerged as crucial for immunotherapy aimed at enhancing anti-tumor responses. The development of nanomedicines specifically designed to target MDSCs aims to improve the effectiveness of immunotherapy by transforming immunosuppressive tumors into ones more responsive to immune intervention. This review provides a detailed overview of MDSCs in the TME and current strategies targeting these cells. Also the benefits of nanoparticle-assisted drug delivery systems, including design flexibility, efficient drug loading, and protection against enzymatic degradation, are highlighted. It summarizes advances in nanomedicine targeting MDSCs, covering enhanced treatment efficacy, safety, and modulation of the TME, laying the groundwork for more potent cancer immunotherapy.

Construction of smartphone-adapted signal visualization platform for dual-mode detection of H2S based on integrated metal-organic framework nanoprobes

Hydrogen sulfide (H2S) is a toxic contaminant and has great influence on many physiological processes. Due to various pathophysiological roles and environmental pollution problems, it is necessary to construct and develop simple and portable monitoring sensors for the precise detection of H2S. Herein, we developed a smartphone-adapted dual-mode detection platform by integrating the colorimetric and photothermal imaging analysis into a metal-organic framework-based chip (ZIF-8/Cu). Due to the nanoconfinement effect of ZIF-8, small-sized plasmonic CuS could be in-situ formed during the detection procedure of H2S and endowed the chips with excellent photothermal properties. By constructing a smartphone-adapted photothermal imager, the metal-organic framework-based chip could achieve a portable photothermal imaging analysis of H2S. Moreover, as the formed CuS was a good peroxidase-like nanozyme, the chips could also be used to trigger the enzymic catalytic reaction toward the chromogenic reaction of 3,3',5,5'-tetramethylbenzidine (TMB)-H2O2, thus providing another colorimetric sensing mode by using a smartphone App. In this smartphone-adapted visualization platform, the portable chemosensors could simultaneously achieve double detection modes at one electrode, which provided a new pathway for the accurate detection of H2S and circumvented the false-positive or negative errors during the detection process. Besides, by using the finite difference time domain (FDTD) simulation method, the in-depth mechanism, including the plasmonic effect and spatial electromagnetic field distribution, was explored to provide a possible reason for the excellent sensing performance of the dual-mode visualization platform. This work provides a new insight into the construction of the accurate, portable and smart sensing platform in the visual screening of H2S.

3D Hierarchical MOF-Derived Defect-Rich NiFe Spinel Ferrite as a Highly Efficient Electrocatalyst for Oxygen Redox Reactions in Zinc-Air Batteries

The strategy of defect engineering is increasingly recognized for its pivotal role in modulating the electronic structure, thereby significantly improving the electrocatalytic performance of materials. In this study, we present defect-enriched nickel and iron oxides as highly active and cost-effective electrocatalysts, denoted as Ni0.6Fe2.4O4@NC, derived from NiFe-based metal-organic frameworks (MOFs) for oxygen reduction reactions (ORR) and oxygen evolution reactions (OER). XANES and EXAFS confirm that the crystals have a distorted structure and metal vacancies. The cation defect-rich Ni0.6Fe2.4O4@NC electrocatalyst exhibits exceptional ORR and OER activities (ΔE = 0.68 V). Mechanistic pathways of electrochemical reactions are studied by DFT calculations. Furthermore, a rechargeable zinc-air battery (RZAB) using the Ni0.6Fe2.4O4@NC catalyst demonstrates a peak power density of 187 mW cm-2 and remarkable long-term cycling stability. The flexible solid-state ZAB using the Ni0.6Fe2.4O4@NC catalyst exhibits a power density of 66 mW cm-2. The proposed structural design strategy allows for the rational design of electronic delocalization of cation defect-rich NiFe spinel ferrite attached to ultrathin N-doped graphitic carbon sheets in order to enhance active site availability and facilitate mass and electron transport.

Binder-Free MOF-Based and MOF-Derived Nanoarrays for Flexible Electrochemical Energy Storage: Progress and Perspectives

The fast development of Internet of Things and the rapid advent of next-generation versatile wearable electronics require cost-effective and highly-efficient electroactive materials for flexible electrochemical energy storage devices. Among various electroactive materials, binder-free nanostructured arrays have attracted widespread attention. Featured with growing on a conductive and flexible substrate without using inactive and insulating binders, binder-free 3D nanoarray electrodes facilitate fast electron/ion transportation and rapid reaction kinetics with more exposed active sites, maintain structure integrity of electrodes even under bending or twisted conditions, readily release generated joule heat during charge/discharge cycles and achieve enhanced gravimetric capacity of the whole device. Binder-free metal-organic framework (MOF) nanoarrays and/or MOF-derived nanoarrays with high surface area and unique porous structure have emerged with great potential in energy storage field and been extensively exploited in recent years. In this review, common substrates used for binder-free nanoarrays are compared and discussed. Various MOF-based and MOF-derived nanoarrays, including metal oxides, sulfides, selenides, nitrides, phosphides and nitrogen-doped carbons, are surveyed and their electrochemical performance along with their applications in flexible energy storage are analyzed and overviewed. In addition, key technical issues and outlooks on future development of MOF-based and MOF-derived nanoarrays toward flexible energy storage are also offered.

Confinement of p-Xylene in the Pores of a Bilanthanide Metal-Organic Framework for Highly Selective Recognition

The rapid and accurate sensing of p-xylene, an essential raw material with a multi-billion-dollar market, in xylene mixture is of great significance in industry; however, the highly similar molecular structures, energy levels, and spectral characteristics of xylene isomers make the selective recognition extremely challenging. Metal-organic frameworks (MOFs) exhibiting tailorable pores and potential binding sites provide prospects for xylene sensing but a comprehensive understanding of the pore effect is still elusive, primarily due to the intricacies involved in the sensing process. Herein, we reported a robust bilanthanide MOF NKU-999-EuTb with precisely engineered pores to accommodate p-xylene, of which the binding sites were confirmed by single crystal X-ray diffraction and dynamic magnetic susceptibilities. NKU-999-EuTb exhibits high-performance in selective recognition for p-xylene towards its isomers. Through a systematical study, it was revealed that absorbing p-xylene into the pores governs the sensing performance. This work provides insights for developing advanced sensing materials for complex isomers.

Advances and Applications of Metal-Organic Frameworks (MOFs) in Emerging Technologies: A Comprehensive Review

Metal-organic frameworks (MOFs) that are the wonder material of the 21st century consist of metal ions/clusters coordinated to organic ligands to form one- or more-dimensional porous structures with unprecedented chemical and structural tunability, exceptional thermal stability, ultrahigh porosity, and a large surface area, making them an ideal candidate for numerous potential applications. In this work, the recent progress in the design and synthetic approaches of MOFs and explore their potential applications in the fields of gas storage and separation, catalysis, magnetism, drug delivery, chemical/biosensing, supercapacitors, rechargeable batteries and self-powered wearable sensors based on piezoelectric and triboelectric nanogenerators are summarized. Lastly, this work identifies present challenges and outlines future opportunities in this field, which can provide valuable references.

Unlocking Bimetallic Active Centers via Heterostructure Engineering for Exceptional Phosphate Electrosorption: Internal Electric Field-Induced Electronic Structure Reconstruction

Development of electrode materials exhibiting exceptional phosphate removal performance represents a promising strategy to mitigate eutrophication and meet ever-stricter stringent emission standards. Herein, we precisely designed a novel LaCeOx heterostructure-decorated hierarchical carbon composite (L8C2PC) for high-efficiency phosphate electrosorption. This approach establishes an internal electric field within the LaCeOx heterostructure, where the electrons transfer from Ce atoms to neighboring La atoms through superexchange interactions in La-O-Ce coordination units. The modulatory heterostructure endows a positive shift of the d band of La sites and the increase of electron density at Fermi level, promoting stronger orbital overlap and binding interactions. The introduction of oxygen vacancies during the in situ nucleation process reduces the kinetic barrier for phosphate-ion migration and supplies additional active centers. Moreover, the hierarchical carbon framework ensures electrical double-layer capacitance for phosphate storage and interconnected ion migration channels. Such synergistically multiple active centers grant the L8C2PC electrode with high-efficiency record in phosphate electrosorption. As expected, the L8C2PC electrode demonstrates the highest removal capability among the reported electrode materials with a saturation capacity of 401.31 mg P g-1 and a dynamic capacity of 91.83 mg P g-1 at 1.2 V. This electrochemical system also performs well in the dephosphorization in natural water samples with low concentration that enable effluent concentration to meet the first-class discharge standard for China (0.5 mg P L-1). This study advances efficient dephosphorization techniques to a new level and offers a deep understanding of the internal electric field that regulates metal orbitals and electron densities in heterostructure engineering.

Ultrathin Fe-MOFs modified by Fe9S10 for highly efficient oxygen evolution reaction

Developing efficient and economical catalysts is essential for water splitting. The application of MOF catalysts in water splitting is limited by poor conductivity; however, the introduction of conductive TMS could enhance their activity. Herein, novel composite Fe9S10/Fe-MOF/NF-2 was constructed by introducing dendritic Fe9S10 onto the surface of a 2D ultrathin Fe-MOF. Composite catalysts elaborately utilize the structural and chemical advantages of MOF and TMS while improving the deficiencies of monomers through the combination. Owing to the optimal structure, the hybrid catalyst Fe9S10/Fe-MOF/NF-2 displayed better catalytic performance than bare Fe-MOFs and Fe9S10, with low overpotentials of 202 and 216 mV at 10 mA cm-2 in alkaline solution and simulated seawater, respectively. This work provides an innovative approach to modify MOFs as electrocatalysts for OER.