Biofilm extracellular polysaccharides degradation during starvation and enamel demineralization

Biochemical properties of a Flavobacterium johnsoniae dextranase and its biotechnological potential for Streptococcus mutans biofilm degradation

Cariogenic biofilms have a matrix rich in exopolysaccharides (EPS), mutans and dextrans, that contribute to caries development. Although several physical and chemical treatments can be employed to remove oral biofilms, those are only partly efficient and use of biofilm-degrading enzymes represents an exciting opportunity to improve the performance of oral hygiene products. In the present study, a member of a glycosyl hydrolase family 66 from Flavobacterium johnsoniae (FjGH66) was heterologously expressed and biochemically characterized. The recombinant FjGH66 showed a hydrolytic activity against an early EPS-containing S. mutans biofilm, and, when associated with a α-(1,3)-glucosyl hydrolase (mutanase) from GH87 family, displayed outstanding performance, removing more than 80% of the plate-adhered biofilm. The mixture containing FjGH66 and Prevotella melaninogenica GH87 α-1,3-mutanase was added to a commercial mouthwash liquid to synergistically remove the biofilm. Dental floss and polyethylene disks coated with biofilm-degrading enzymes also degraded plate-adhered biofilm with a high efficiency. The results presented in this study might be valuable for future development of novel oral hygiene products.

Fluoride export is required for the competitive fitness of pathogenic microorganisms in dental biofilm models

Microorganisms resist fluoride toxicity using fluoride export proteins from one of several different molecular families. Cariogenic species Streptococcus mutans and Candida albicans extrude intracellular fluoride using a CLCF F-/H+ antiporter and FEX fluoride channel, respectively, whereas oral commensal eubacteria, such as Streptococcus gordonii, export fluoride using a Fluc fluoride channel. In this work, we examine how genetic knockout of fluoride export impacts pathogen fitness in single-species and three-species dental biofilm models. For biofilms generated using S. mutans with the genetic knockout of the CLCF transporter, exposure to low fluoride concentrations decreased S. mutans counts, synergistically reduced the populations of C. albicans, increased the relative proportion of oral commensal S. gordonii, and reduced properties associated with biofilm pathogenicity, including acid production and hydroxyapatite dissolution. Biofilms prepared with C. albicans with genetic knockout of the FEX channel also exhibited reduced fitness in the presence of fluoride but to a lesser degree. Imaging studies indicate that S. mutans is highly sensitive to fluoride, with the knockout strain undergoing complete lysis when exposed to low fluoride for a moderate amount of time. Biochemical purification of the S. mutans CLCF transporter and functional reconstitution establishes that the functional protein is a dimer encoded by a single gene. Together, these findings suggest that fluoride export by oral pathogens can be targeted by specific inhibitors to restore biofilm symbiosis in dental biofilms and that S. mutans is especially susceptible to fluoride toxicity.

IMPORTANCE

Dental caries is a globally prevalent condition that occurs when pathogenic species, including Streptococcus mutans and Candida albicans, outcompete beneficial species, such as Streptococcus gordonii, in the dental biofilm. Fluoride is routinely used in oral hygiene to prevent dental caries. Fluoride also has antimicrobial properties, although most microbes possess fluoride exporters to resist its toxicity. This work shows that sensitization of cariogenic species S. mutans and C. albicans to fluoride by genetic knockout of fluoride exporters alters the microbial composition and pathogenic properties of dental biofilms. These results suggest that the development of drugs that inhibit fluoride exporters could potentiate the anticaries effect of fluoride in over-the-counter products like toothpaste and mouth rinses. This is a novel strategy to treat dental caries.

Evaluation of Microbiological Susceptibility and Long-term Adhesive Properties to Dentin of Primers with Terminalia catappa Linn

PURPOSE

To investigate the antibacterial effects of Terminalia catappa Linn (TCL) leaf extracts at different concentrations and the effects of these extracts used as primers on the long-term adhesive properties of two universal adhesives.

MATERIALS AND METHODS

After extract preparation, the antimicrobial and antibacterial activities of TCL against Streptococcus mutans (UA 159) were assessed in microdilution assays to provide the minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC). Additionally, to provide quantitative data on the ability of TCL extract to reduce cell viability, colony forming units (CFU) were counted. To examine adhesive properties, 288 human molars were randomly assigned to 32 experimental conditions (n = 9) according to the following variables: (1) treatment agent: negative control (untreated surface), and primers at concentrations of 1xMIC, 5xMIC, and 10xMIC; (2) adhesives: Scotchbond Universal (SBU) and Futurabond Universal (FBU); (3) adhesive strategy: etch-and-rinse (ER) or self-etch (SE); and (4) storage time: 24 h or after 2 years. Primers were applied for 60 s, upon which the teeth were incrementally restored and sectioned into adhesive-dentin bonded sticks. These were tested for microtensile bond strength (μTBS) and nanoleakage (NL) after 24-h and 2-year water storage, as well as in-situ degree of conversion (DC) at 24 h. The chemical profile of the hybrid layer was determined via micro-Raman spectroscopy. Biofilm assay data were analyzed using the Kruskal-Wallis test; the pH of culture media and the chemical profile were analyzed by one-way ANOVA. The adhesive properties (µTBS, NL, DC) were evaluated using a four-way ANOVA and Tukey's test. Significance was set at 5%.

RESULTS

Similar values of MIC and MBC were observed (2 mg/ml), showing bactericidal potential. CFU analysis demonstrated that concentrations of 5xMIC and 10xMIC significantly inhibited biofilm formation (p < 0.001). The application of the TCL primer at all concentrations significantly increased the immediate μTBS and DC, and decreased the immediate NL values when compared to the control group (p < 0.05), regardless of the adhesive and adhesive strategies. Despite an increase in the NL values for all groups after 2 years (p > 0.05), in groups where the TCL primer was applied, the μTBS remained constant after 2 years for both adhesives, while a decrease in the μTBS was observed in the control groups (p < 0.05). Usually, 10xMIC showed better results than 1xMIC and 5xMIC (p < 0.05). The application of TCL promoted cross-linking; cross-linking rates increased proportionally to the concentration of TCL (p < 0.05).

CONCLUSION

Primers containing TCL promoted bactericidal and bacteriostatic action, as well as cross-linking with dentin, while maintaining the adhesive properties of the adhesive-dentin interface after 2 years of water storage.

Fluoride export is required for competitive fitness of pathogenic microorganisms in dental biofilm models

Microorganisms resist fluoride toxicity using fluoride export proteins from one of several different molecular families. Cariogenic species Streptococcus mutans and Candida albicans extrude intracellular fluoride using a CLCF F-/H+ antiporter and FEX fluoride channel, respectively, whereas commensal eubacteria, such as Streptococcus gordonii, export fluoride using a Fluc fluoride channel. In this work, we examine how genetic knockout of fluoride export impacts pathogen fitness in single-species and three-species dental biofilm models. For biofilms generated using S. mutans with genetic knockout of the CLCF transporter, exposure to low fluoride concentrations decreased S. mutans counts, synergistically reduced the populations of C. albicans, increased the relative proportion of commensal S. gordonii, and reduced properties associated with biofilm pathogenicity, including acid production and hydroxyapatite dissolution. Biofilms prepared with C. albicans with genetic knockout of the FEX channel also exhibited reduced fitness in the presence of fluoride, but to a lesser degree. Imaging studies indicate that S. mutans is highly sensitive to fluoride, with the knockout strain undergoing complete lysis when exposed to low fluoride for a moderate amount of time, and biochemical purification the S. mutans CLCF transporter and functional reconstitution establishes that the functional protein is a dimer encoded by a single gene. Together, these findings suggest that fluoride export by oral pathogens can be targeted by specific inhibitors to restore biofilm symbiosis in dental biofilms, and that S. mutans is especially susceptible to fluoride toxicity.

Recombinant Prevotella melaninogenica α-1,3 glucanase and Capnocytophaga ochracea α-1,6 glucanase as enzymatic tools for in vitro degradation of S. mutans biofilms

Dental biofilms represent a serious oral health problem playing a key role in the development of caries and other oral diseases. In the present work, we cloned and expressed in E. coli two glucanases, Prevotella melaninogenica mutanase (PmGH87) and Capnocytophaga ochracea dextranase (CoGH66), and characterized them biochemically and biophysically. Their three-dimensional structures were elucidated and discussed. Furthermore, we tested the capacity of the enzymes to hydrolyze mutan and dextran to prevent formation of Streptococcus mutans biofilms, as well as to degrade pre- formed biofilms in low and abundant sugar conditions. The percentage of residual biofilm was calculated for each treatment group in relation to the control, as well as the degree of synergism. Our results suggest that both PmGH87 and CoGH66 are capable of inhibiting biofilm formation grown under limited or abundant sucrose conditions. Degradation of pre-formed biofilms experiments reveal a time-dependent effect for the treatment with each enzyme alone. In addition, a synergistic and dose-dependent effects of the combined enzymatic treatment with the enzymes were observed. For instance, the highest biomass degradation was 95.5% after 30 min treatment for the biofilm grown in low sucrose concentration, and 93.8% after 2 h treatment for the biofilm grown in sugar abundant condition. Strong synergistic effects were observed, with calculated degree of synergism of 5.54 and 3.18, respectively and their structural basis was discussed. Jointly, these data can pave the ground for the development of biomedical applications of the enzymes for controlling growth and promoting degradation of established oral biofilms.

Does Streptococcus oralis supernatant influence on the proliferation and virulence of Candida albicans?

OBJECTIVE

To evaluate the influence of Streptococcus oralis supernatant on the proliferation and virulence of Candida albicans.

DESIGN

S. oralis supernatant was obtained by filtration of overnight cultures. Single or dual-species cultures of C. albicans and S. oralis were cultivated in both planktonic and biofilm-based models. Planktonic culture growth was measured, and mature biofilms formed on resin disks were collected to measure biofilm metabolic activity, total biomass, and cell counts. Hyphae formation (virulence factor) and biofilm thickness were analyzed by confocal laser scanning microscopy. Data were analyzed by a one-way ANOVA test followed by the Tukey posthoc test (α = 0.05).

RESULTS

We found that S. oralis supernatant did not influence C. albicans proliferation in planktonic cultures. However, biofilms containing S. oralis supernatant showed higher cell metabolism than C. albicans monoculture biofilms and C. albicans-S. oralis dual-culture biofilms (p < 0.05). Though S. oralis supernatants did increase biofilm metabolic activity, they did not affect the total biomass and cell counts of C. albicans (p > 0.05). However, biofilm imaging revealed enhanced C. albicans hyphae formation in biofilms containing S. oralis supernatant compared to C. albicans monoculture biofilms.

CONCLUSIONS

Secreted metabolites in S. oralis supernatant may contribute to C. albicans metabolism and virulence.

Effect of Processing Methods of Human Saliva on the Proteomic Profile and Protein-Mediated Biological Processes

The use of saliva as a protein source prior to microbiological and biological assays requires previous processing. However, the effect of these processing methods on the proteomic profile of saliva has not been tested. Stimulated human saliva was collected from eight healthy volunteers. Non-processed saliva was compared with 0.22 μm filtered, 0.45 μm filtered, and pasteurized saliva, by liquid chromatography-mass spectrometry. Data are available via ProteomeXchange with identifier PXD039248. The effect of processed saliva on microbial adhesion was tested using bacterial and fungus species and in biological cell behavior using HaCaT immortalized human keratinocytes. Two hundred and seventy-eight proteins were identified in non-processed saliva, of which 54 proteins (≈19%) were exclusive. Saliva processing reduced identified proteins to 222 (≈80%) for the 0.22 μm group, 219 (≈79%) for the 0.45 μm group, and 201 (≈72%) for the pasteurized saliva, compared to non-processed saliva. The proteomic profile showed similar molecular functions and biological processes. The different saliva processing methods did not alter microbial adhesion (ANOVA, p > 0.05). Interestingly, pasteurized saliva reduced keratinocyte cell viability. Saliva processing methods tested reduced the proteomic profile diversity of saliva but maintained similar molecular functions and biological processes, not interfering with microbial adhesion and cell viability, except for pasteurization, which reduced cell viability.

Bacterial-derived extracellular polysaccharides reduce antimicrobial susceptibility on biotic and abiotic surfaces

OBJECTIVE

Extracellular biofilm matrix plays a role in reducing bacterial susceptibility against antimicrobials. Since the surface where biofilm is growing modulates microbial accumulation and bacterial-derived exopolysaccharides (EPS) synthesis, this study compared the role of EPS to reduce antimicrobial susceptibility on biotic (dental surface) and abiotic (titanium (Ti) material) surfaces and the effect of remaining matrix-enriched biofilms to promote bacterial recolonization.

DESIGN

48 h Streptococcus mutans UA159 strain biofilms were grown on enamel and Ti surfaces. The medium was supplemented with 1% sucrose, substrate for EPS synthesis, or with 0.5% glucose + 0.5% fructose as control. Chlorhexidine (CHX) 0.2% was used for antimicrobial treatment. Biofilms were collected and the following analyses were considered: viable bacterial counts, biofilm pH, EPS content, and biofilm structure by scanning electron microscopy and confocal laser scanning microscopy (CLSM). Substrate surfaces were analyzed by 3D laser scanning confocal microscope.

RESULTS

Enamel surface showed a higher amount of EPS content (p < 0.05), which may be explained by the higher bacterial biomass compared to Ti material. EPS content reduced bacterial susceptibility against antimicrobial treatments for both substrates, compared to EPS control (p < 0.05). However, sucrose-treated cells presented the same magnitude of reduction for Ti or enamel. Interestingly, matrix-enriched biofilms favored bacterial recolonization for both substrates.

CONCLUSION

The surface where the biofilm is growing modulates the amount of EPS synthesized and matrix content plays a key role in reducing antimicrobial susceptibility and promoting bacterial recolonization.

Polymicrobial biofilms related to dental implant diseases: unravelling the critical role of extracellular biofilm matrix

Biofilms are complex tri-dimensional structures that encase microbial cells in an extracellular matrix comprising self-produced polymeric substances. The matrix rich in extracellular polymeric substance (EPS) contributes to the unique features of biofilm lifestyle and structure, enhancing microbial accretion, biofilm virulence, and antimicrobial resistance. The role of the EPS matrix of biofilms growing on biotic surfaces, especially dental surfaces, is largely unravelled. To date, there is a lack of a broad overview of existing literature concerning the relationship between the EPS matrix and the dental implant environment and its role in implant-related infections. Here, we discuss recent advances in the critical role of the EPS matrix on biofilm growth and virulence on the dental implant surface and its effect on the etiopathogenesis and progression of implant-related infections. Similar to other biofilms associated with human diseases/conditions, EPS-enriched biofilms on implant surfaces promote microbial accumulation, microbiological shift, cross-kingdom interaction, antimicrobial resistance, biofilm virulence, and, consequently, peri-implant tissue damage. But intriguingly, the protagonism of EPS role on implant-related infections and the development of matrix-target therapeutic strategies has been neglected. Finally, we highlight the need for more in-depth analyses of polymicrobial interactions within EPS matrix and EPS-targeting technologies' rationale for disrupting the complex biofilm microenvironment with more outstanding translation to implant applications in the near future.

Engineered Salivary Peptides Reduce Enamel Demineralization Provoked by Cariogenic S. mutans Biofilm

Engineering of the acquired enamel pellicle using salivary peptides has been shown to be a promising anticaries strategy. However, the mechanisms by which these peptides protect teeth against tooth decay are not fully understood. In this study, we evaluated the effect of the engineered salivary peptides DR9-DR9 and DR9-RR14 on enamel demineralization in two experimental conditions: (1) adsorbed onto the enamel surface forming the AEP, and (2) forming the AEP combined with their use to treat the biofilms 2×/day, using a validated cariogenic Streptococcus mutans in vitro biofilm model. Biofilms were grown for 144 h on enamel slabs and then collected to determine the bacterial viability (CFU/biofilm) and biofilm mass (mg protein/biofilm), and to extract cellular/extracellular proteins, which were characterized by mass spectrometry. The culture medium was changed 2×/day to fresh medium, and pH (indicator of biofilm acidogenicity) and calcium concentration (indicator of demineralization) was determined in used medium. DR9-RR14 peptide significantly reduced enamel demineralization (p < 0.0001) in both experimental conditions. However, this peptide did not have a significant effect on biofilm biomass (p > 0.05) nor did it modulate the expression of cellular and extracellular bacterial proteins involved in biofilm cariogenicity. These findings suggest that DR9-RR14 may control caries development mainly by a physicochemical mechanism.

Development and characterization of experimental ZnO cement containing niobophosphate bioactive glass as filling temporary material

Aims

The aim of this study was to develop and characterize a temporary restorative material based on a zinc oxide matrix containing niobophosphate bioactive glass (NbG) for the caries-affected dentin treatment.

Material and methods

NbG was added to a ZnO₂ matrix in different concentrations (wt%). EDS-SEM, ATR-FTIR and XRD analyses were performed to characterize the cement. Calcium release was evaluated in TRIS solution after 1, 7 and 14 days by colorimetric method (A₆₅₀). Compressive strengths and setting times were performed to analyze mechanical properties.

Results

EDS spectra confirmed the presence of Ca, P and Nb in the groups containing NbG. EDS mapping exhibit the ZnO₂ homogeneous distribution, and NbG immersed in this matrix. Peaks suggesting interaction between matrix and NbG were not detected in Ftir spectra. Calcium releasing showed to be time-dependent for experimental groups containing 10, 20, 30 and 40%. The NbG incorporation progressively increased the compressive strength values in the experimental groups. NbG incorporation seemed to influence the ZnO₂ matrix early setting reaction. No statistical difference was observed in the final setting time.

Conclusion

The addition of NbG particles into zinc oxide matrix could work as a mechanical reinforcement. It is suggested that the calcium released by the cement containing at least 10% NbG could induce apatite formation.

Proteomics of Streptococcus mutans to Reveal the Antibiofilm Formation Mechanism of Ag/ZnO Nanocomposites with Light-Emitting Diode Radiation

Introduction

As a biofilm-associated disease, dental caries benefits from nanoparticle (NP)-based therapies. Streptococcus mutans (S. mutans) is a primary aetiologic agent for dental caries development. We successfully applied a synergistic therapy of Ag/ZnO nanocomposites combined with light-emitting diode (LED) radiation to inhibit S. mutans biofilms. However, the antibiofilm mechanism has not been fully elucidated, and little is known about the biofilm formation ability of bacteria that survive NP-based therapies.

Methods

This study explored the antibiofilm formation mechanism of this synergistic therapy by an integrated approach based upon proteomics.

Results

Synergistic therapy killed 99.8% of bacteria, while the biofilm formation ability of 0.2% surviving bacteria was inhibited. The proteomic responses of S. mutans to synergistic therapy were comprehensively characterized to unveil the mechanism of bacterial death and biofilm formation inhibition of the surviving bacteria. In total, 55 differentially expressed proteins (12 upregulated and 43 downregulated) were recorded. The bioinformatic analysis demonstrated that cellular integrity damage and regulated expression of structure-associated proteins were the main reasons for bacterial death. In addition, the proteomic study indicated the potential inhibition of metabolism in surviving bacteria and provided a biofilm-related network consisting of 17 differentially expressed proteins, explaining the multiantibiofilm formation actions. Finally, we reported and verified the inhibitory effects of synergistic therapy on sucrose metabolism and D-alanine metabolism, which disturbed the biofilm formation of surviving bacteria.

Conclusion

Our findings demonstrated that synergistic therapy killed most bacteria and inhibited the surviving bacteria from forming biofilms. Furthermore, the antibiofilm formation mechanism was revealed by proteomics analysis of S. mutans after synergistic therapy and subsequent metabolic studies. Our success may provide a showcase to explore the antibiofilm formation mechanism of NP-based therapies using proteomic studies.

Validation of a cariogenic biofilm model by evaluating the effect of fluoride on enamel demineralization

In vitro biofilm models have been extensively used, but only few of the models available to date had been validated in terms of the dose-response effect of anti-caries and/or antimicrobial substances. Additionally, none of the validated models allow the use of microliter volumes of the treatment solutions, needed mainly to test (screen) novel but expensive substances under development. This study aimed at modifying an in vitro cariogenic Streptococcus mutans biofilm model and validating it by assessing the dose-response effect of fluoride on enamel demineralization. S. mutans cariogenic biofilms were developed on saliva-coated enamel slabs previously bonded to acrylic holders fixed to a lid of a culture plate. Biofilms were incubated 8 h/day in culture medium supplemented with 1% sucrose and then overnight in culture medium with glucose 0.1 mM. Biofilms were also treated 2×/day with 2.0 mL of solutions containing 0, 125, 275 and 1250 μg F/mL (n = 10/group). The replaced culture medium was used to: determine the biofilm acidogenicity; estimate the demineralization of enamel; and monitor the fluoride concentration. At 144 h, biofilms were collected for fluoride concentration analyses, and the fluoride uptake by enamel was determined in each slab. The model showed a dose-response effect of fluoride (R² = 0.96, p < 0.001) between enamel demineralization and the fluoride concentration of the treatments. Water-soluble and bound biofilm fluoride concentrations (p < 0.007), as well as the firmly-bound fluoride concentration found in enamel (p < 0.0001), increased in a dose-dependent manner. Our model constitutes a validated approach that would allow the assessment of the anticaries potential of novel biotechnological strategies, as in the case of expensive salivary peptides, because it would allow to test the treatment solutions using smaller volumes.

Effect of different salivary glucose concentrations on dual-species biofilms of Candida albicans and Streptococcus mutans

Diabetes mellitus is one of the most prevalent diseases worldwide. The glucose levels found in the blood of diabetic patients can be reflected in the saliva, which can favor biofilm growth and predispose denture wearers to oral candidiasis. This study aimed to evaluate the effect of different salivary glucose concentrations on dual-species biofilms of Candida albicans and Streptococcus mutans. A 96-h biofilm was developed on acrylic resin specimens exposed to 'feast' (10% sucrose) and 'famine' periods. Biofilms were constantly exposed to salivary glucose concentrations equivalent to 0, 20, 60 and 100 mM. Higher salivary glucose concentrations resulted in increased counts of C. albicans and a higher quantity of insoluble extracellular polysaccharides. All biofilms presented high phospholipase activity. The biofilms were characterized by the predominance of yeast cells and microcolonies in all the groups analyzed with co-localization of both species. Higher salivary glucose concentrations formed more robust and potentially virulent biofilms.

Cariogenic Potential of Human and Bovine Milk on Enamel Demineralization

The higher cariogenicity of human milk when compared with bovine milk is still a debatable subject. Therefore, we evaluated the effect of human or bovine milk exposure on biofilm composition and enamel demineralization using a validated cariogenic biofilm model. Streptococcus mutans UA159 biofilms (n = 8) were grown on human saliva-coated bovine enamel slabs of known surface hardness. The biofilms were exposed 8×/day to 0.9% NaCl (negative control), human milk, bovine milk, 7.0% lactose (active human milk control), 4.5% lactose (active bovine milk control), or 10% sucrose (positive control). The culture medium was changed twice daily, and the pH was analyzed as an indicator of biofilm acidogenicity. After 120 h of growth, biofilms were harvested to evaluate viable cells, and soluble and insoluble extracellular polysaccharides (EPS). Enamel demineralization was assessed by the percentage of surface hardness loss (%SHL). Data were analyzed by one-way ANOVA/Tukey's test (α = 5%). In terms of %SHL, negative control (7.7 ± 3.1), human milk control (13.3 ± 7.5), bovine milk control (15.3 ± 8.2), human milk (7.5 ± 5.0), and bovine milk (8.7 ± 6.3) did not differ among them (p > 0.05) but differed (p < 0.05) from sucrose (55.1 ± 5.4). The findings of enamel demineralization (%SHL) were statistically supported by the data of biofilm acidogenicity, bacterial counts and EPS biofilm composition. This experimental study suggests that human and bovine milk have low cariogenic potential to provoke caries lesions in enamel.

The Route of Sucrose Utilization by Streptococcus mutans Affects Intracellular Polysaccharide Metabolism

Streptococcus mutans converts extracellular sucrose (Suc) into exopolysaccharides (EPS) by glucosyl-transferase and fructosyl-transferase enzymes and internalizes Suc for fermentation through the phosphotransferase system (PTS). Here, we examined how altering the routes for sucrose utilization impacts intracellular polysaccharide [IPS; glycogen, (glg)] metabolism during carbohydrate starvation. Strain UA159 (WT), a mutant lacking all exo-enzymes for sucrose utilization (MMZ952), and a CcpA-deficient mutant (∆ccpA) were cultured with sucrose or a combination of glucose and fructose, followed by carbohydrate starvation. At baseline (0h), and after 4 and 24h of starvation, cells were evaluated for mRNA levels of the glg operon, IPS storage, glucose-1-phosphate (G1P) concentrations, viability, and PTS activities. A pH drop assay was performed in the absence of carbohydrates at the baseline to measure acid production. We observed glg operon activation in response to starvation (p<0.05) in all strains, however, such activation was significantly delayed and reduced in magnitude when EPS synthesis was involved (p<0.05). Enhanced acidification and greater G1P concentrations were observed in the sucrose-treated group, but mostly in strains capable of producing EPS (p<0.05). Importantly, only the WT exposed to sucrose was able to synthesize IPS during starvation. Contrary to CcpA-proficient strains, IPS was progressively degraded during starvation in ∆ccpA, which also showed increased glg operon expression and greater PTS activities at baseline. Therefore, sucrose metabolism by secreted enzymes affects the capacity of S. mutans in synthesizing IPS and converting it into organic acids, without necessarily inducing greater expression of the glg operon.

Extracellular biofilm matrix leads to microbial dysbiosis and reduces biofilm susceptibility to antimicrobials on titanium biomaterial: An in vitro and in situ study

OBJECTIVES

To test the role of exopolysaccharide (EPS) polymers matrix to modulate the composition/virulence of biofilms growing on titanium (Ti) surfaces, the effect on antibiotic susceptibility, and whether a dual-targeting therapy approach for disrupted EPS matrix could improve the antimicrobial effect.

MATERIALS AND METHODS

A microcosm biofilm model using human saliva as inoculum was used, and the microbial composition was assessed by checkerboard DNA-DNA hybridization. EPS-enriched biofilms virulence was tested using fibroblast monolayer. Povidone-iodine (PI) was used as EPS-targeting agent followed by amoxicillin + metronidazole antibiotic to reduce bacterial biomass using an in situ model.

RESULTS

An EPS-enriched environment, obtained by sucrose exposure, promoted bacterial accumulation and led to a dysbiosis on biofilms, favoring the growth of Streptococcus, Fusobacterium, and Campylobacter species and even strict anaerobic species related to peri-implant infections, such as Porphyromonas gingivalis and Tannerella forsythia (~3-fold increase). EPS-enriched biofilm transitioned from a commensal aerobic to a pathogenic anaerobic profile. EPS increased biofilm virulence promoting higher host cell damage and reduced antimicrobial susceptibility, but the use of a dual-targeting approach with PI pre-treatment disrupted EPS matrix scaffold, increasing antibiotic effect on in situ biofilms.

CONCLUSION

Altogether, our data provide new insights of how EPS matrix creates an environment that favors putative pathogens growth and shed light to a promising approach that uses matrix disruption as initial step to potentially improve implant-related infections treatment.

Modulatory Effect of Glycated Collagen on Oral Streptococcal Nanoadhesion

Biofilm-mediated oral diseases such as dental caries and periodontal disease remain highly prevalent in populations worldwide. Biofilm formation initiates with the attachment of primary colonizers onto surfaces, and in the context of caries, the adhesion of oral streptococci to dentinal collagen is crucial for biofilm progression. It is known that dentinal collagen suffers from glucose-associated crosslinking as a function of aging or disease; however, the effect of collagen crosslinking on the early adhesion and subsequent biofilm formation of relevant oral streptococci remains unknown. Therefore, the aim of this work was to determine the impact of collagen glycation on the initial adhesion of primary colonizers such as Streptococcus mutans UA159 and Streptococcus sanguinis SK 36, as well as its effect on the early stages of streptococcal biofilm formation in vitro. Type I collagen matrices were crosslinked with either glucose or methylglyoxal. Atomic force microscopy nanocharacterization revealed morphologic and mechanical changes within the collagen matrix as a function of crosslinking, such as a significantly increased elastic modulus in crosslinked fibrils. Increased nanoadhesion forces were observed for S. mutans on crosslinked collagen surfaces as compared with the control, and retraction curves obtained for both streptococcal strains demonstrated nanoscale unbinding behavior consistent with bacterial adhesin-substrate coupling. Overall, glucose-crosslinked substrates specifically promoted the initial adhesion, biofilm formation, and insoluble extracellular polysaccharide production of S. mutans, while methylglyoxal treatment reduced biofilm formation for both strains. Changes in the adhesion behavior and biofilm formation of oral streptococci as a function of collagen glycation could help explain the biofilm dysbiosis seen in older people and patients with diabetes. Further studies are necessary to determine the influence of collagen crosslinking on the balance between acidogenic and nonacidogenic streptococci to aid in the development of novel preventive and therapeutic treatment against dental caries in these patients.

A review of biochemical and thermochemical energy conversion routes of wastewater grown algal biomass

Microalgae are recognized as a potential source of biomass for obtaining bioenergy. However, the lack of studies towards economic viability and environmental sustainability of the entire production chain limits its large-scale application. The use of wastewaters economizes natural resources used for algal biomass cultivation. However, desirable biomass characteristics for a good fuel may be impaired when wastewaters are used, namely low lipid content and high ash and protein contents. Thus, the choice of wastewaters with more favorable characteristics may be one way of obtaining a more balanced macromolecular composition of the algal biomass and therefore, a more suitable feedstock for the desired energetic route. The exploration of biorefinery concept and the use of wastewaters as culture medium are considered as the main strategic tools in the search of this viability. Considering the economics of overall process, direct utilization of wet biomass using hydrothermal liquefaction or hydrothermal carbonization and anaerobic digestion is recommended. Among the explored routes, anaerobic digestion is the most studied process. However, some main challenges remain as little explored, such as a low energy pretreatment and suitable and large-scale reactors for algal biomass digestion. On the other hand, thermochemical conversion routes offer better valorization of the algal biomass but have higher costs. A biorefinery combining anaerobic digestion, hydrothermal carbonization and hydrothermal liquefaction processes would provide the maximum possible output from the biomass depending on its characteristics. Therefore, the choice must be made in an integrated way, aiming at optimizing the quality of the final product to be obtained. Life cycle assessment studies are critical for scaling up of any algal biomass valorization technique for sustainability. Although there are limitations, suitable integrations of these processes would enable to make an economically feasible process which require further study.

Synthesis of bioactive glass-based coating by plasma electrolytic oxidation: Untangling a new deposition pathway toward titanium implant surfaces

HYPOTHESIS

Although bioactive glass (BG) particle coatings were previously developed by different methods, poor particle adhesion to surfaces and reduced biological effects because of glass crystallization have limited their biomedical applications. To overcome this problem, we have untangled, for the first time, plasma electrolytic oxidation (PEO) as a new pathway for the synthesis of bioactive glass-based coating (PEO-BG) on titanium (Ti) materials.

EXPERIMENTS

Electrolyte solution with bioactive elements (Na₂SiO₃-5H₂O, C₄H₆O₄Ca, NaNO₃, and C₃H₇Na₂O₆P) was used as a precursor source to obtain a 45S5 bioglass-like composition on a Ti surface by PEO. Subsequently, the PEO-BG coating was investigated with respect to its surface, mechanical, tribological, electrochemical, microbiological, and biological properties, compared with those of machined and sandblasted/acid-etched control surfaces.

FINDINGS

PEO treatment produced a coating with complex surface topography, Ti crystalline phases, superhydrophilic status, chemical composition, and oxide layer similar to that of 45S5-BG (~45.0Si, 24.5 Ca, 24.5Na, 6.0P w/v%). PEO-BG enhanced Ti mechanical and tribological properties with higher corrosion resistance. Furthermore, PEO-BG had a positive influence in polymicrobial biofilms, by reducing pathogenic bacterial associated with biofilm-related infections. PEO-BG also showed higher adsorption of blood plasma proteins without cytotoxic effects on human cells, and thus may be considered a promising biocompatible approach for biomedical implants.

Dynamics of Dissolution, Killing, and Inhibition of Dental Plaque Biofilm

The present study aims to establish a standardized model that makes it possible to evaluate the dynamic dissolution of biofilm, killing of biofilm microbes and inhibition of growth of biofilm by disinfecting solutions. Biofilm was grown from dental plaque bacteria on collagen-coated hydroxyapatite (HA) disks for 3 days or 3 weeks under anaerobic conditions. Biofilms were stained with the LIVE/DEAD viability stain and subjected to sterile water, 2% sodium hypochlorite (NaOCl), 6% NaOCl, or 2% chlorhexidine (CHX) for 32 min. Dynamic change in fluorescence on bacterial cells and extracellular polymeric substance (EPS) during the exposure was analyzed using Alexa Fluor 647-labeled dextran conjugate and a live-cell imaging confocal laser scanning microscopy (LC-CLSM). The biofilm structures after treatments were visualized by scanning electron microscopy (SEM). The treated biofilms on HA disks were collected and subjected to colony forming unit (CFU) counting. Another set of sterile HA disks were coated with CHX prior to the monitoring of plaque biofilm growth for 12 h. The LC-CLSM results showed that NaOCl dissolved biofilm effectively, more so at a higher concentration and longer exposure time. Six percent NaOCl was the most effective at dissolving and killing bacteria (e.g., 99% bacterial reduction in 3-day-old biofilm and 95% bacterial reduction in 3-week-old biofilm in 32 min) followed by 2% NaOCl and CHX. Sodium hypochlorite dissolved over 99.9% of the EPS whereas CHX only slightly reduced the EPS biovolume in 32 min. CFU results indicated that the dispersed biofilm bacteria are more resistant than planktonic bacteria to disinfectants. SEM showed the disruption of biofilm after exposures to CHX and NaOCl. The use of 2% CHX and sterile water did not result in biofilm dissolution. However, prior exposure of the HA disks to 2 and 0.2% CHX for 3 min prevented biofilm from growing on the HA disk surfaces for at least 12 h. This new platform has the potential to aid in a better understanding of the antibiofilm properties of oral disinfectants.

Ratiometric Imaging of the in Situ pH Distribution of Biofilms by Use of Fluorescent Mesoporous Silica Nanosensors

Biofilms are communities of microorganisms enclosed in a self-generated matrix of extracellular polymeric substances. While biofilm recalcitrance and persistence are caused by several factors, a reduction in antimicrobial susceptibility has been closely associated with the generation of pH gradients within the biofilm structure. Cells embedded within the biofilm create a localized acidic microenvironment, which is unaffected by the external pH. Therefore, pH monitoring is a promising approach for understanding the complexities of a three-dimensional heterogeneous biofilm. A fluorescent pH nanosensor was designed through the synthesis of mesoporous silica nanoparticles (47 ± 5 nm diameter) conjugated to a pH-sensitive dye (fluorescein) and a pH-insensitive dye (rhodamine B) as an internal standard (dye-MSNs). The fluorescence intensity of fluorescein (I_F) reduced significantly as the pH was decreased from 8.5 to 3.5. In contrast, the fluorescence intensity of rhodamine B (I_R) remained constant at any pH. The ratio of I_F/I_R produced a sigmoidal curve with respect to the pH, in a working pH range between 4.5 and 7.5. Dye-MSNs enabled the measurement of pH gradients within Pseudomonas fluorescens WCS 365 biofilm microcolonies. The biofilms showed spatially distinct low-pH regions that were enclosed into large clusters corresponding to high-cell-density areas. Also present were small low-pH areas that spread indistinctly throughout the microcolony caused by the mass transfer effect. The lowest detected pH within the inner core of the microcolonies was 5.1, gradually increasing to a neutral pH toward the exterior of the microcolonies. The dye-MSNs were able to fully penetrate the biofilm matrix and allowed a quantitative ratiometric analysis of pH gradients and distribution throughout the biofilm, which was independent of the nanoparticle concentration.

Antimicrobial properties of acrylic resins doped with Undaria pinnatifida exposed to light-emitting diode: In silico and in vitro assessments on multispecies biofilm-producing microbiota

BACKGROUND

This study sought to evaluates the efficiency of anti-microbial activity of acrylic resins doped with different concentrations of Undaria pinnatifida after activation with light-emitting diode (LED) at producing photodynamic damage to multispecies biofilm-producing microbiome.

MATERIAL AND METHODS

In this study, bioinformatics tools and computer simulation molecular modeling were used to evaluate the capacity of ferredoxin (FDX), an electron acceptor in metabolic pathways of U. pinnatifida, which can discharge electrons produced from photo-excited chlorophyll-a (Chl-a) by LED irradiation. Acrylic resin discs containing different concentration of U. pinnatifida (0, 0.5, 1, and 2%) were fabricated and were subjected to LED irradiation immediately before each experiment. After continuously rinsed (up to 30 days), the antimicrobial activity of acrylic resins doped with U. pinnatifida following photo-activation was determined by disc agar diffusion, biofilm formation inhibition, and eluted component assays versus bacterial species linked to caries that constitute a mixed biofilm including Streptococcus mutans, S. sanguinis, and Lactobacillus acidophilus, as well as Candida albicans as main etiology of candidal stomatitis.

RESULTS

Modeling and a virtual screening analysis of FDX indicated that it is a stable protein with an iron-sulfur center that can discharge electrons produced from photo-excited Chl-a and transfers them to FDX-NADP+ reductase for NADP+ reduction in photosystem I, which is essential in the Calvin cycle for carbon assimilation. FDX acts as an electron transfer agent in the redox reactions. The results showed that growth inhibition zones were not seen around acrylic resin discs in any group. In biofilm test, the colony counts of all test microorganisms significantly decreased (36%-87%) by an increase in the percentage of U. pinnatifida in acrylic resins after photo-activation (P < 0.05). Acrylic resins doped with 2% wt. U. pinnatifida following photo-activation using LED was inhibited biofilm formation by the test microorganisms, up to 30 days of rinsing.

CONCLUSION

Based on the results presented here, an acrylic resin containing U. pinnatifida, even at the lowest concentration, following photo-activation using LED have antimicrobial properties against planktonic and biofilm forms of the cariogenic microorganisms as well as C. albicans.

Visible-Light-Induced Photocatalytic and Antibacterial Activity of TiO2 Codoped with Nitrogen and Bismuth: New Perspectives to Control Implant-Biofilm-Related Diseases

Biofilm-associated diseases are one of the main causes of implant failure. Currently, the development of implant surface treatment goes beyond the osseointegration process and focuses on the creation of surfaces with antimicrobial action and with the possibility to be re-activated (i.e., light source activation). Titanium dioxide (TiO₂), an excellent photocatalyst used for photocatalytic antibacterial applications, could be a great alternative, but its efficiency is limited to the ultraviolet (UV) range of the electromagnetic spectrum. Since UV radiation has carcinogenic potential, we created a functional TiO₂ coating codoped with nitrogen and bismuth via the plasma electrolytic oxidation (PEO) of titanium to achieve an antibacterial effect under visible light with re-activation potential. A complex surface topography was demonstrated by scanning electron microscopy and three-dimensional confocal laser scanning microscopy. Additionally, PEO-treated surfaces showed greater hydrophilicity and albumin adsorption compared to control, untreated titanium. Bismuth incorporation shifted the band gap of TiO₂ to the visible region and facilitated higher degradation of methyl orange (MO) in the dark, with a greater reduction in the concentration of MO after visible-light irradiation even after 72 h of aging. These results were consistent with the in vitro antibacterial effect, where samples with nitrogen and bismuth in their composition showed the greatest bacterial reduction after 24 h of dual-species biofilm formation ( Streptococcus sanguinis and Actinomyces naeslundii) in darkness with a superior effect at 30 min of visible-light irradiation. In addition, such a coating presents reusable photocatalytic potential and good biocompatibility by presenting a noncytotoxicity effect on human gingival fibroblast cells. Therefore, nitrogen and bismuth incorporation into TiO₂ via PEO can be considered a promising alternative for dental implant application with antibacterial properties in darkness, with a stronger effect after visible-light application.

Protocols to Study Dental Caries In Vitro: Microbial Caries Models

Caries lesions result from the interaction between dental biofilm and sugars. Since the biofilm is an important component in the etiology of the disease, biofilm models have been developed to study the cariogenicity of dietary sugars, as well as the anticaries effect of substances. Two of such models, termed as "static" or "continuous flow," are described in details here together with their advantages, limitations, and applications.

Candida albicans Increases Dentine Demineralization Provoked by Streptococcus mutans Biofilm

Streptococcus mutans are considered the most cariogenic bacteria, but it has been suggested that Candida albicans could increase their cariogenicity. However, the effect of this dual-species microorganisms' combination on dentine caries has not been experimentally evaluated. Biofilms of C. albicans, S. mutans and C. albicans + S. mutans (n = 12/biofilm) were grown in ultra-filtered tryptone yeast extract broth culture medium for 96 h on root dentine slabs of known surface hardness and exposed 8 times per day for 3 min to 10% sucrose. The medium was changed 2 times per day (after the 8 cariogenic challenges and after the overnight period of famine), and aliquots were analyzed to determinate the pH (indicator of biofilm acidogenicity). After 96 h, the biofilms were collected to determine the wet weight, colony-forming units, and the amounts of extracellular polysaccharides (soluble and insoluble). Dentine demineralization was assessed by surface hardness loss (% SHL). The architecture of the biofilms was analyzed by confocal laser scanning microscopy (CLSM) and transmission electron microscopy (TEM). Data were analyzed by ANOVA followed by Tukey's test (α = 0.05). The dual-species C. albicans + S. mutans biofilm provoked higher % SHL on dentine (p < 0.05) than the S. mutans and C. albicans biofilm. This was supported by the results of biofilm acidogenicity and the amounts of soluble (6.4 ± 2.14 vs. 4.0 ± 0.94 and 1.9 ± 0.97, respectively) and insoluble extracellular polysaccharides (24.9 ± 9.22 vs. 18.9 ± 5.92 and 0.7 ± 0.48, respectively) (p < 0.05). The C. albicans biofilm alone presented low cariogenicity. The images by CLSM and TEM, respectively, suggest that the C. albicans + S. mutans biofilm is more voluminous than the S. mutans biofilm, and S. mutans cells interact with C. albicans throughout polysaccharides from the biofilm matrix. These findings show that C. albicans enhances the cariogenic potential of the S. mutans biofilm, increasing dentine demineralization.

Dose-response effect of chlorhexidine on a multispecies oral biofilm formed on pure titanium and on a titanium-zirconium alloy

This study aimed to test the dose-response effect of chlorhexidine on multispecies biofilms formed on commercially pure titanium (cpTi) and titanium-zirconium (TiZr) alloy. Biofilms were formed on cpTi and TiZr discs and treated two times per day with five different chlorhexidine concentrations (0.12, 0.20, 0.50, 1, 2%). The biofilms were collected for microbiological, biochemical and microscopic analyses. The significance of differences among groups was evaluated by linear regression, ANOVA, Bonferroni and Tukey tests. The mean number of colony-forming units decreased as the chlorhexidine concentration increased for both cpTi and TiZr (p < 0.05). The maximum effect was observed with the 0.5% concentration. Confocal microscopy images suggested an increase in the number of dead bacterial cells with increased chlorhexidine concentration. The biofilm pH increased after chlorhexidine exposure (p < 0.05). Chlorhexidine showed an antimicrobial dose-response effect in controlling biofilm on cpTi and TiZr. 0.5% chlorhexidine can be used to achieve the maximum antimicrobial effect on both materials.

Fluoride Penetration and Clearance Are Higher in Exopolysaccharide-Containing Bacterial Pellets

Extracellular polysaccharides (EPS) could increase the penetration of fluoride through dental biofilm, reducing its cariogenicity. We measured the concentration of fluoride in EPS-containing (EPS+) or not-containing (EPS-) Streptococcus mutans bacterial pellets resembling test biofilms, before and up to 60 min after a 0.05% NaF rinse in situ. Fluoride penetration and clearance were higher in EPS+ bacterial pellets. The data suggest that EPS enhances fluoride penetration, but also accelerates fluoride clearance from dental biofilms.

Effect of Violet-Blue Light on Streptococcus mutans-Induced Enamel Demineralization

Background: This in vitro study determined the effectiveness of violet-blue light (405 nm) on inhibiting Streptococcus mutans-induced enamel demineralization. Materials and Methods: S. mutans UA159 biofilm was grown on human enamel specimens for 13 h in 5% CO₂ at 37 °C with/without 1% sucrose. Wet biofilm was treated twice daily with violet-blue light for five minutes over five days. A six-hour reincubation was included daily between treatments excluding the final day. Biofilms were harvested and colony forming units (CFU) were quantitated. Lesion depth (L) and mineral loss (∆Z) were quantified using transverse microradiography (TMR). Quantitative light-induced fluorescence Biluminator (QLF-D) was used to determine mean fluorescence loss. Data were analyzed using one-way analysis of variance (ANOVA) to compare differences in means. Results: The results demonstrated a significant reduction in CFUs between treated and non-treated groups grown with/without 1% sucrose. ∆Z was significantly reduced for specimens exposed to biofilms grown without sucrose with violet-blue light. There was only a trend on reduction of ∆Z with sucrose and with L on both groups. There were no differences in fluorescence-derived parameters between the groups. Conclusions: Within the limitations of the study, the results indicate that violet-blue light can serve as an adjunct prophylactic treatment for reducing S. mutans biofilm formation and enamel mineral loss.