A neoteric antibacterial ceria-silver nanozyme for abiotic surfaces

Community-associated and hospital-acquired infections caused by bacteria continue to yield major global challenges to human health. Bacterial contamination on abiotic surfaces is largely spread via high-touch surfaces and contemporary standard disinfection practices show limited efficacy, resulting in unsatisfactory therapeutic outcomes. New strategies that offer non-specific and broad protection are urgently needed. Herein, we report our novel ceria-silver nanozyme engineered at a molar ratio of 5:1 and with a higher trivalent (Ce3+) surface fraction. Our results reveal potent levels of surface catalytic activity on both wet and dry surfaces, with rapid, and complete eradication of Pseudomonas aeruginosa, Staphylococcus aureus, and methicillin resistant S. aureus, in both planktonic and biofilm form. Preferential electrostatic adherence of anionic bacteria to the cationic nanozyme surface leads to a catastrophic loss in both aerobic and anaerobic respiration, DNA damage, osmodysregulation, and finally, programmed bacterial lysis. Our data reveal several unique mechanistic avenues of synergistic ceria-Ag efficacy. Ag potentially increases the presence of Ce3+ sites at the ceria-Ag interface, thereby facilitating the formation of harmful H2O2, followed by likely permeation across the cell wall. Further, a weakened Ag-induced Ce-O bond may drive electron transfer from the Ec band to O2, thereby further facilitating the selective reduction of O2 toward H2O2 formation. Ag destabilizes the surface adsorption of molecular H2O2, potentially leading to higher concentrations of free H2O2 adjacent to bacteria. To this end, our results show that H2O2 and/or NO/NO2-/NO3- are the key liberators of antibacterial activity, with a limited immediate role being offered by nanozyme-induced ROS including O2•- and OH•, and likely other light-activated radicals. A mini-pilot proof-of-concept study performed in a pediatric dental clinic setting confirms residual, and continual nanozyme antibacterial efficacy over a 28-day period. These findings open a new approach to alleviate infections caused by bacteria for use on high-touch hard surfaces.

Sorghum drought tolerance is enhanced by cerium oxide nanoparticles via stomatal regulation and osmolyte accumulation

Sorghum [Sorghum bicolor (L.) Moench] yield is limited by the coincidence of drought during its sensitive stages. The use of cerium oxide nanoparticles in agriculture is minimal despite its antioxidant properties. We hypothesize that drought-induced decreases in photosynthetic rate in sorghum may be associated with decreased tissue water content and organelle membrane damage. We aimed to quantify the impact of foliar application of nanoceria on transpiration rate, accumulation of compatible solutes, photosynthetic rate and reproductive success under drought stress in sorghum. In order to ascertain the mechanism by which nanoceria mitigate drought-induced inhibition of photosynthesis and reproductive success, experiments were undertaken in a factorial completely randomized design or split-plot design. Foliar spray of nanoceria under progressive soil drying conserved soil moisture by restricting the transpiration rate than water spray, indicating that nanoceria exerted strong stomatal control. Under drought stress at the seed development stage, foliar application of nanoceria at 25 mg L-1 significantly improved the photosynthetic rate (19%) compared to control by maintaining a higher tissue water content (18%) achieved by accumulating compatible solutes. The nanoceria-sprayed plants exhibited intact chloroplast and thylakoid membranes because of increased heme enzymes [catalase (53%) and peroxidase (45%)] activity, which helped in the reduction of hydrogen peroxide content (74%). Under drought, compared to water spray, nanoceria improved the seed-set percentage (24%) and individual seed mass (27%), eventually causing a higher seed yield. Thus, foliar application of nanoceria at 25 mg L-1 under drought can increase grain yield through increased photosynthesis and reproductive traits.

Understanding and controlling the formation of single-atom site from supported Cu10 cluster by tuning CeO2 reducibility: Theoretical insight into the Gd-doping effect on electronic metal-support interaction

Controlling the formation of single-atom (SA) sites from supported metal clusters is an important and interesting issue to effectively improve the catalytic performance of heterogeneous catalysts. For extensively studied CO oxidation over metal/CeO2 systems, the SA formation and stabilization under reaction conditions is generally attributed to CO adsorption, however, the pivotal role played by the reducible CeO2 support and the underlying electronic metal-support interaction (EMSI) are not yet fully understood. Based on a ceria-supported Cu10 catalyst model, we performed density functional theory calculations to investigate the intrinsic SA formation mechanism and discussed the synergistic effect of Gd-doped CeO2 and CO adsorption on the SA formation. The CeO2 reducibility is tuned with doped Gd content ranging from 12.5 % ∼ 25 %. Based on ab initio thermodynamic and ab initio molecular dynamics, the critical condition for SA formation was identified as 21.875 % Gd-doped CeO2 with CO-saturated adsorption on Cu10. Electronic analysis revealed that the open-shell lattice Oδ- (δ < 2) generated by Gd doping facilitates the charge transfer from the bottom-corner Cu (Cubc) to CeO2. The CO-saturated adsorption further promotes this charge transfer process and enhances the EMSI between Cubc and CeO2, leading to the disintegration of Cubc from Cu10 and subsequent formation of the active SA site.

Sonocatalytic degradation of Bisphenol A from aquatic matrices over Pd/CeO2 nanoparticles: Kinetics study, transformation products, and toxicity

In this work, different ratios of palladium - cerium oxide (Pd/CeO2) catalyst were synthesized and characterized, while their sonocatalytic activity was evaluated for the degradation of the xenobiotic Bisphenol A (BPA) from aqueous solutions. Sonocatalytic activity expressed as BPA decomposition exhibited a volcano-type behavior in relation to the Pd loading, and the 0.25Pd/CeO2 catalyst characterized by the maximum Pd dispersion and lower crystallite size demonstrated the higher activity. Using 500 mg/L of 0.25 % Pd/CeO2 increased the kinetic constant for BPA destruction by more than two times compared to sonolysis alone (20 kHz at 71 W/L). Meanwhile, the simultaneous use of ultrasound and a catalyst enhanced the efficiency by 50.1 % compared to the sum of the individual processes, resulting in 95 % BPA degradation in 60 min. The sonocatalytic degradation of BPA followed pseudo-first-order kinetics, and the apparent kinetic constant was increased with ultrasound power and catalyst loading, while the efficiency was decreased in bottled water and secondary effluent. From the experiments that were conducted using appropriate scavengers, it was revealed that the degradation mainly occurred on the bubble/liquid interface of the formed cavities, while the reactive species produced from the thermal or light excitation of the prepared semiconductor also participated in the reaction. Five first-stage and four late-stage transformation products were identified using UHPLC/TOF-MS, and a pathway for the sonocatalytic degradation of BPA was proposed. According to ECOSAR software prediction, most transformation by-products (TBPs) present lower ecotoxicity than the parent compound, although some remain toxic to the indicators chosen.

Catalytic MXCeO2 for enzyme based electrochemical biosensors: Fabrication, characterization and application towards a wearable sweat biosensor

Two-dimensional (2D) layered materials that integrate metallic conductivity, catalytic activity and the ability to stabilize biological receptors provide unique capabilities for designing electrochemical biosensors for large-scale detection and diagnostic applications. Herein, we report a multifunctional MXene-based 2D nanostructure decorated with enzyme mimetic cerium oxide nanoparticle (MXCeO2) as a novel platform and catalytic amplifier for electrochemical biosensors, specifically targeting the detection of oxidase enzyme substrates. We demonstrate enhanced catalytic efficiency of the MXCeO2 for the reduction of hydrogen peroxide (H2O2) and its ability to immobilize oxidase enzymes, such as glucose oxidase, lactate oxidase and xanthine oxidase. The designed biosensors exhibit high selectivity, stability, and sensitivity, achieving detection limits of 0.8 μM H2O2, 0.49 μM glucose, 3.6 μM lactate and 1.7 μM hypoxanthine, when the MXCeO2 and their respective enzymes were used. The MXCeO2 was successfully incorporated into a wearable fabric demonstrating high sensitivity for lactate measurements in sweat. The unique combination of MXenes with CeO2 offers excellent conductivity, catalytic efficiency and enhanced enzyme loading, demonstrating potential of the MXCeO2 as a catalytically active material to boost efficiency of oxidase enzyme reactions. This design can be used as a general platform for increasing the sensitivity of enzyme based biosensors and advance the development of electrochemical biosensors for a variety of applications.

Cerium oxide nanoparticles in diabetic foot ulcer management: Advances, limitations, and future directions

Diabetic foot ulcer (DFU) is one of the most serious complications of diabetes, potentially resulting in wound infection and amputation under severe circumstances. Oxidative stress and dysbiosis are the primary factors that delay wound healing, posing challenges to effective treatment. Unfortunately, conventional approaches in these aspects have proven satisfactory in achieving curative outcomes. Recent research has increasingly focused on using nanoparticles, leveraging their potential in wound dressing and medication delivery. Their unique physical properties further enhance their therapeutic effectiveness. Among these nanoparticles, cerium oxide nanoparticles (CONPs) have garnered attention due to their notable beneficial effects on oxidative stress and microbial abundance, thus representing a promising therapeutic avenue for DFU. This review comprehensively assesses recent studies on CONPs in treating DFU. Furthermore, we elaborate on the wound healing process, ceria synthesis, and incorporating CONPs with other materials. Crucially, a thorough evaluation of CONPs' toxicity as a novel metallic nanomaterial for therapeutic use must precede their formal clinical application. Additionally, we identify the current challenges CONPs encounter and propose future directions for their development.

Bulk and Surface Contributions to Ionisation Potentials of Metal Oxides

Determining the absolute band edge positions in solid materials is crucial for optimising their performance in wide-ranging applications including photocatalysis and electronic devices. However, obtaining absolute energies is challenging, as seen in CeO2 , where experimental measurements show substantial discrepancies in the ionisation potential (IP). Here, we have combined several theoretical approaches, from classical electrostatics to quantum mechanics, to elucidate the bulk and surface contributions to the IP of metal oxides. We have determined a theoretical bulk contribution to the IP of stoichiometric CeO2 of only 5.38 eV, while surface orientation results in intrinsic IP variations ranging from 4.2 eV to 8.2 eV. Highly tuneable IPs were also found in TiO2 , ZrO2 , and HfO2 , in which surface polarisation plays a pivotal role in long-range energy level shifting. Our analysis, in addition to rationalising the observed range of experimental results, provides a firm basis for future interpretations of experimental and computational studies of oxide band structures.

Ultra-fast photocatalytic degradation and seed germination of band gap tunable nickel doping ceria nanoparticles

Doping transition metal ions into cerium oxide (CeO₂) results in interesting modifications to the material, including an increase in surface area, a high isoelectric point, biocompatibility, greater ionic conductivity, and catalytic activity. Herein, various concentrations (1-5%, 10% and 20%) of nickel (Ni) doped CeO₂ nanoparticle have been made by a facile chemical process. Using a variety of cutting-edge analytical techniques, the structural, optical, and photocatalytic properties of undoped and varied concentrations (1-5%, 10%, and 20%) of Ni doped CeO₂ nanoparticles have been investigated. Pure cubic fluorite structure with average crystallite sizes in the region of 12-15 nm was determined by X-ray diffraction (XRD) investigation. High resolution electron microscopy (HR-TEM), which revealed highly homogeneous hexagonal shape of the particles with average size of 15 nm, was also used to determine microstructural information. According to the optical absorption, the band gaps of Ni doped and undoped CeO₂ nanoparticles were found to be 2.96 eV and 1.95 eV, respectively. When exposed to sunlight, the narrow band gap Ni doped CeO₂ nanoparticles worked as an active visible light catalyst to remove the dyes Rose Bengal (RB) and Direct Yellow (DY). The best photodegradation efficiencies for RB and DY dyes were found about 93% and 97%, respectively, using the 5% Ni-doped CeO₂ catalyst. The apparent rate constant values of 0.039 for RB and 0.040 min^-1 were attained for DY. As well, the treated, untreated dye solution and control solutions were utilized to assess the toxicity of commercially accessible Vigna Radiata seeds. In this study exhibits percentages of length and germination increased by 30-35% when compared to dye pollutant solution. The Ni doped CeO₂ can provide a substantial alternative for current industrial waste management because of its quick photocatalytic activity and remarkable seed germination results.

Removal of fluoride ions from water by cerium-carboxymethyl cellulose beads doped with CeO2 nanoparticles

A novel adsorbent for fluoride ions (F^-) removal was prepared from cerium ion cross-linked carboxymethyl cellulose (CMC) biopolymer beads loaded with CeO₂ nanoparticles (NPs). The characterization of the beads was performed by swelling experiments, scanning electron microscopy and Fourier transforms infrared spectroscopy. The adsorption of fluoride ions from aqueous solutions was carried out with both cerium ion cross-linked CMC beads (CMCCe) and CeO₂-NPs added beads (CeO₂-CMC-Ce) in a batch system. Optimized adsorption conditions were obtained by testing the parameters such as pH, contact time, adsorbent dose, and shaking rate at 25 °C. The adsorption process is well described by the Langmuir isotherm and pseudo-second-order kinetics. The maximum adsorption capacity was found as 105 and 312 mg/g F^- for CMC-Ce and CeO₂-CMC-Ce beads, respectively. Reusability studies showed that, the adsorbent beads have exhibited excellent sustainable properties up to 9 cycle usage. This study suggests that, CMC-Ce composite with CeO₂ nanoparticles is a very effective adsorbent in removing fluoride from water.

Doping rare earth cations with an additional chemical reduction synergistically weakened the photocatalytic performance of ceria

Chemical reducing or rare earth cations (RE) doping was normally employed to promote the photocatalytic performance of ceria, aimed to evaluate their cooperation influences, ceria was obtained by decomposing homogenously RE (RE = La, Sm, and Y)-doped CeCO₃OH in H₂. XPS and EPR results evidenced that the excess oxygen vacancies (OVs) were formed in RE-doped CeO₂ compared to the un-doped ceria. However, all the RE-doped ceria unexpectedly showed an impeded photocatalytic activity towards to methylene blue (MB) photodegradation. The 5% Sm-doped ceria had the best MB photodegradation ratio of 81.47% after 2-h reaction in all RE-doped samples, which was lower than that of 87.24% for the un-doped ceria. After doping RE cations and chemical reducing, the band gap of ceria were almost narrowed, while the PL spectra and photo-electro characterizations indicated that the separation efficiency of photo-excited e^-/h⁺ (electrons/holes) was reduced. The RE dopants and formed excess OVs including inner and surface OVs was proposed to promote the recombination of e^-/h⁺ which further hindered the generation of active species of ·O₂^- and ·OH, and finally weakened the photocatalytic activity of ceria.

Photocatalytic degradation of Reactive Black dye using ZnO-CeO2 nanocomposites

This study presents the photocatalytic efficiency of ZnO-CeO₂ nanocomposites for the degradation of a model Reactive Black (RB) dye. Nano-CeO₂ was synthesized using cerium nitrate precursor solution via chemical precipitation. Synthesized nano-CeO₂ was mixed with ZnO nanoparticles in different mass ratios to obtain ZnO-CeO₂ heterojunction photocatalyst. The morphology of the nanocomposites was examined using transmission electron microscope (TEM). X-ray diffraction patterns of the CeO₂ corresponded well with (1 1 1) plane of cubic-phase CeO₂. The band gap of the ZnO-CeO₂ nanocatalyst synthesized was determined to be 3.08 eV, which was lower than that of the pristine CeO₂ and ZnO powders, respectively. The results indicate that 1:1 wt. ratio ZnO-CeO₂ nanocomposite provides about 85% RB degradation within 90 min under UV light under alkaline pH conditions. Degradation rate of RB dye achieved with ZnO-CeO₂ nanocomposite was almost 1.5 times greater than that obtained with pristine ZnO. Increasing CeO₂ ratio beyond 1:1 wt. ratio did not significantly increase RB degradation. The results demonstrate that addition of CeO₂ to ZnO results in lowering its band gap energy and aids charge carrier separation resulting in enhanced oxidation of RB dye under UV light.

Boosting the Activity of Pd Single Atoms by Tuning Their Local Environment on Ceria for Methane Combustion

Supported Pd single atom catalysts (SACs) have triggered great research interest in methane combustion yet with contradicting views on their activity and stability. Here, we show that the Pd SAs can take different electronic structure and atomic geometry on ceria support, resulting in different catalytic properties. By a simple thermal pretreatment to ceria prior to Pd deposition, a unique anchoring site is created. The Pd SA, taking this site, can be activated to Pd^δ+ (0<δ<2) that has greatly enhanced activity for methane oxidation: T₅₀ lowered by up to 130 °C and almost 10 times higher turnover frequency compared to the untreated catalyst. The enhanced activity of Pd^δ+ site is related to its oxygen-deficient local structure and elongated interacting distance with ceria, leading to enhanced capability in delivering reactive oxygen species and decomposing reaction intermediates. This work provides insights into designing highly efficient Pd SACs for oxidation reactions.

Ceria-Supported Cobalt Catalyst for Low-Temperature Methanation at Low Partial Pressures of CO2

The direct catalytic conversion of atmospheric CO₂ to valuable chemicals is a promising solution to avert negative consequences of rising CO₂ concentration. However, heterogeneous catalysts efficient at low partial pressures of CO₂ still need to be developed. Here, we explore Co/CeO₂ as a catalyst for the methanation of diluted CO₂ streams. This material displays an excellent performance at reaction temperatures as low as 175 °C and CO₂ partial pressures as low as 0.4 mbar (the atmospheric CO₂ concentration). To gain mechanistic understanding of this unusual activity, we employed in situ X-ray photoelectron spectroscopy and operando infrared spectroscopy. The higher surface concentration and reactivity of formates and carbonyls-key reaction intermediates-explain the superior activity of Co/CeO₂ as compared to a conventional Co/SiO₂ catalyst. This work emphasizes the catalytic role of the cobalt-ceria interface and will aid in developing more efficient CO₂ hydrogenation catalysts.

Tuning the olefin-VOCs epoxidation performance of ceria by mechanochemical loading of coinage metal

Under the background of carbon dioxide emission reduction, how to realize the treatment and the high value-added conversion of typical olefin volatile organic compounds (olefin-VOCs), such as styrene, is a big challenge. In this contribution, the ceria-supported coinage metal catalysts (M/CeO₂, M = Au, Ag, and Cu) are successfully synthesized by a dry mechanochemical method, and their catalytic performance for styrene-VOC epoxidation with tert-butyl hydrogen peroxide (TBHP) as an oxidant to prepare high-value styrene oxide (SO) is investigated. The oxygen vacancies of ceria play a key role in the anchoring of metal nanoparticles. After ball milling, Au(III) is partially reduced and coexists on ceria in two valence states (Au³⁺ and Au⁰), and the reactive oxygen species of the as-prepared catalyst are enhanced. The catalytic behaviors, including solvents effect, substrate concentration, oxidant ratio, catalyst dosage, reaction time, and temperature, are systematically investigated. Au/CeO₂ exhibits good styrene epoxidation performance with a total styrene conversion of 94% and a SO yield of 63%, along with good reusability and substrate scalability. Thermodynamics and kinetics show that Au/CeO₂ was more favorable for styrene epoxidation and this reaction is dominated by the rate of intrinsic chemical reactions on the surface of the catalyst. Based on experimental discussions and a set of characterizations (XPS, XRD, in-situ FT-IR, ESR, ESI-HSMS, etc.), the mechanism is revealed as the synergistic catalysis between the reactive oxygen species of Au/CeO₂ and the peroxide radicals generated by the homolysis of TBHP.

Visible light active hybrid silver decorated g-C3N4-CeO2 nanocomposite for ultrafast photocatalytic activity and toxicity evaluation

Development of hybrid graphitic carbon nitride (GCN) nanocomposite is an emerging research area in wastewater treatment. Herein, hybrid visible light active photocatalyst of silver decorated polymeric graphitic carbon nitride and (Ag-GCN) with cerium oxide (CeO₂) nanocomposite was prepared and characterized in detail. The Ag-GCN/CeO₂ photocatalyst has successfully prepared by an electrostatic self-assembly approach. The synthesized Ag-GCN/CeO₂ NCs photocatalysts are characterized by various physio-chemical techniques. Using the Ag-GCN/CeO₂ catalyst, the excellent photodegradation efficiency of Acid yellow-36 (AY-36) and Direct yellow-12 (DY-12) dye solution were achieved 100% within 150 min sun light irradiation. The Ag-GCN/CeO₂ rate constant values of 0.048 and 0.046/min has been determined for AY-36 and DR-12 dyes, respectively. The extraordinary photocatalytic activity is due to incorporation of CeO₂ with Ag-GCN which play a significant role in visible light absorption, superior reactive oxygen generation (ROS) and excellent pollutant catalyst interaction. The toxicity of the photocatalytically degraded AY-36 and DR-12 dyes were measured using the soil nematode Caenorhabditis elegans, a well-established in vivo model in biology, by analyzing survival, physiological functions, intracellular ROS levels, and stress-protective gene expressions.

Green synthesized Ag decorated CeO2 nanoparticles: Efficient photocatalysts and potential antibacterial agents

Implication of natural resources for manufacturing of nanoparticles is sustainable, economical and contaminant free approach towards ecological and medical applications. Herein, CeO₂ and Ag/CeO₂ nanoparticles are green synthesized from Morinda tinctoria plant extract. The phase structure, surface morphology, optical identity, Ce(III) and Ce(IV) valency of the synthesized CeO₂ and Ag/CeO₂ nanoparticles are explored. The X-ray diffraction analysis indicated the formation of cubic phase CeO₂ and cubic silver decorated CeO₂ nanoparticles. Fourier transform infrared (FTIR) spectroscopy revealed the metal decoration of CeO₂ nanoparticles, metal-oxygen stretching, indicating the plant molecules reduction and stabilization. UV-visible spectroscopy shown the decreased band gap owing to silver modification. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) micrographs displayed spherical morphology of the nanoparticles. Elemental composition and sample purity is assessed by energy dispersive spectroscopy (EDS). Double oxidation of Ce, double splitting energy of Ag and lattice oxygen are observed from X-ray photoelectron spectroscopy (XPS). Photocatalytic activity of Ag/CeO₂ exposed the enhanced photocatalytic activity up to 94% where CeO₂ nanoparticles gave 60% degradation of bromophenol blue (BB). The plasmonic decoration of silver on the ceria surface induced the charge separations and free radical reactions. Moreover, Ag/CeO₂ nanoparticles are seen as superior antibacterial agents than CeO₂ towards both E.coli and S.aureus. Hence, the silver decorated metal oxide photocatalyst successfully degraded the BB dye and inactivated the bacterial strains. This report established a future research in green synthesis of multipurpose metal nanoparticles.

Zirconia- and ceria-based electrolytes for fuel cell applications: critical advancements toward sustainable and clean energy production

Solid oxide fuel cells (SOFCs) are emerging as energy conversion devices for large-scale electrical power generation because of their high energy conversion efficiency, excellent ability to minimize air pollution, and high fuel flexibility. In this context, this critical review has focussed on the recent advancements in developing a suitable electrolyte for SOFCs which has been required for the commercialization of SOFC technology after emphasizing the literature from the prior studies. In particular, the significant developments in the field of solid oxide electrolytes for SOFCs, particularly zirconia- and ceria-based electrolytes, have been highlighted as important advancements toward the production of sustainable and clean energy. It has been reported that among various electrolyte materials, zirconia-based electrolytes have the potential to be utilized as the electrolyte in SOFC because of their high thermal stability, non-reducing nature, and high mechanical strength, along with acceptable oxygen ion conductivity. However, some studies have proved that the zirconia-based electrolytes are not suitable for low and intermediate-temperature working conditions because of their poor ionic conductivity to below 850 °C. On the other hand, ceria-based electrolytes are being investigated at a rapid pace as electrolytes for intermediate and low-temperature SOFCs due to their higher oxygen ion conductivity with good electrode compatibility, especially at lower temperatures than stabilized zirconia. In addition, the most emerging advancements in electrolyte materials have demonstrated that the intermediate temperature SOFCs as next-generation energy conversion technology have great potential for innumerable prospective applications.

Carbon dots capped cerium oxide nanoparticles for highly efficient removal and sensitive detection of fluoride

Since the excess exposure to F^- may induce serious issues to human health, the effective adsorption and sensitive detection of F^- is essential. Therefore, carbon dots (CDs) capped CeO₂ (CeO₂@CDs) was synthesized via hydrothermal treatment of tannic acid and CeCl₃. Due to abundant phenolic hydroxyl are reserved and excellent hydrophilicity, CeO₂@CDs possess high F^- adsorption capacity. The partition coefficient parameters (PC) are determined to be 2.65 L/g, which is comparable with previous work. The kinetics results and adsorption isotherm are consistent with pseudo-second-order model and Freundlich model, respectively, indicating the chemisorption dominate the adsorption, mainly via the ion exchange between hydroxyl and F^-. Since phenolic hydroxyl existed on the CeO₂@CDs, synergetic effect of CDs and CeO₂ contribute to superior ROS eliminating capacity, even at acidic conditions. Moreover, due to the ROS scavenging of CeO₂ @CDs abilities can be potentiated by F^-, colorimetric detection of F^- can be realized via horseradish peroxidase as an indicator. The linear range is 0.3-2.1 mM with limit of detection is 0.13 mg/L. The current results imply that CeO₂@CDs possess potential in both efficient removal and sensitive detection of F^- related contamination issues and elucidation of development to address other anions related issues.

Enhancing the bifunctional activity of CoSe2 nanocubes by surface decoration of CeO2 for advanced zinc-air batteries

The coupling of oxygen evolution and reduction reactions (OER and ORR) plays a key role in rechargeable Zn-air batteries (ZABs). However, both OER and ORR still suffer from sluggish kinetics, even when using the mainstream precious metal-based catalysts. Herein, oxygen vacancies-rich CeO₂ decorated CoSe₂ nanocubes are proposed as a novel air electrode to drive OER and ORR for ZABs. The resultant CeO₂ coupled CoSe₂ nanocubes (CeO₂@CoSe₂-NCs) catalyst exhibits a significantly enhanced bifunctional activity relative to the pristine CoSe₂-NCs and the pristine CeO₂. Moreover, an assembled ZABs using this CeO₂@CoSe₂-NCs electrode delivers a high output power density of 153 mW cm^-2 and a long-life stability over 400 cycles, superior to the benchmark Pt/C-IrO₂ electrode. Theoretical calculations reveal that the electronic interaction and oxygen vacancies in CeO₂@CoSe₂-NCs contribute to efficient oxygen electrocatalysis. This protocol provides a promising approach of constructing oxygen vacancies in hybrid catalysts for energy conversion and storage devices.

ROS-Targeted Depression Therapy via BSA-Incubated Ceria Nanoclusters

Depression is one of the most fatal mental diseases, and there is currently a lack of efficient drugs for the treatment of depression. Emerging evidence has indicated oxidative stress as a key pathological feature of depression. We targeted reactive oxygen species (ROS) and synthesized CeO₂@BSA nanoclusters as a novel antidepression nanodrug via a convenient, green, and highly effective bovine serum albumin (BSA) incubation strategy. CeO₂@BSA has ultrasmall size (2 nm) with outstanding ROS scavenging and blood-brain barrier crossing capacity, rapid metabolism, and negligible adverse effects in vitro and in vivo. CeO₂@BSA administration alleviates depressive behaviors and depression-related pathological changes of the chronic restraint stress-induced depressive model, suggesting promising therapeutic effects of CeO₂@BSA for the treatment of depression. Our study proved the validity by directly using nanodrugs as antidepression drugs instead of using them as a nanocarrier, which greatly expands the application of nanomaterials in depression treatment.

Simultaneous catalytic oxidation of elemental mercury and arsine over CeO2(111) surface: a density functional theory study

Ceria (CeO₂)-based materials are potential catalysts for the removal of the Hg⁰ and AsH₃ present in reducing atmospheres. However, theoretical studies investigating the Hg⁰ and AsH₃ removal capacity of ceria remain limited. In this study, the adsorption behavior and mechanistic pathways for the catalytic oxidation of Hg⁰ and AsH₃ on the CeO₂(111) surface, including the calculation of optimized adsorption configurations and energies, were investigated using density functional theory calculations. The results suggest that Hg⁰ and AsH₃ are favorably adsorbed on the CeO₂(111) surface, whereas CO is not, which is crucial for selective removal when CO is a desirable gas component. Furthermore, AsH₃ is adsorbed more favorably than Hg⁰. In addition, the calculations revealed that the Hg atom is initially adsorbed on the surface and then oxidized by lattice oxygen to form HgO. Concerning AsH₃ decomposition, the stepwise dehydrogenation of AsH₃ followed by bonding with lattice O atoms to form the As-O bond seems the most plausible. Finally, the adsorbed As-O bond is further forms elemental As and As₂O₃. Therefore, CeO₂ can adsorb and remove Hg⁰ and AsH₃, making it a promising catalyst for the simultaneous catalytic oxidation of Hg⁰ and AsH₃ in strongly reducing off-gas.

Highly Stable and Reactive Platinum Single Atoms on Oxygen Plasma-Functionalized CeO2 Surfaces: Nanostructuring and Peroxo Effects

Atomically dispersed precious metals on oxide supports have recently become increasingly interesting catalytic materials. Nonetheless, their non‐trivial preparation and limited thermal and environmental stability constitutes an issue for their potential applications. Here we demonstrate that an oxygen plasma pre‐treatment of the ceria (CeO₂) surface serves to anchor Pt single atoms, making them active and resistant towards sintering in the CO oxidation reaction. Through a combination of experimental results obtained on well‐defined CeO₂ films and theory, we show that the O₂ plasma causes surface nanostructuring and the formation of surface peroxo (O₂²⁻) species, favoring the uniform and dense distribution of isolated strongly bonded Pt²⁺ atoms. The promotional effect of the plasma treatment was further demonstrated on powder Pt/CeO₂ catalysts. We believe that plasma functionalization can be applied to other metal/oxide systems to achieve tunable and stable catalysts with a high density of active sites.

Phosphate on ceria with controlled active sites distribution for wide temperature NH3-SCR

Practical catalysts that work well at a wide operation window for selective catalytic reduction of NO_x by NH₃ (NH₃-SCR) are essential for the purification of non-isothermal emission such as vehicle exhaust. However, NH₃-SCR catalyst with high low-temperature performance has excellent NO activation and oxidation ability, leading inevitably to NH₃-intermediates over-oxidation and N₂ selectivity deterioration at high operation temperatures. By far the best performance ceria-based catalyst with a super-wide temperature window of 175-400 ^oC for 90% NO_x conversion in ideal environment and 225-475 ^oC for 90% NO_x conversion by addition of 50 ppm SO₂ and 5% H₂O is obtained via distributing phosphate over the outer of ceria. NH₃ protection strategy is the key for keeping high-temperature activity. Brønsted acidity surged as the formation of P-OH network via a charge compensatory mechanism of phosphate. NH₃ was prone to be captured by the surface P-OH network, forming NH₄⁺ species, avoiding being oxidized and contributing to both low and high temperature activity. NO can also be readily absorbed and oxidized to the absorbed NO₂(ad) species over phosphate as reflected by in situ DRIFTS and DFT calculation, providing a facile pathway for 'fast SCR' by reacting with NH₄⁺ species to form N₂ and H₂O. The reaction followed the L-H mechanism and contributed to catalytic activity under 300 ^oC. This directional structure fabricate strategy helps to increases the NO_x conversion and N₂ selectivity under a broaden temperature window. The enriched Brønsted acid sites over phosphate treated ceria were also demonstrated to have largely suppressed SO₂ adsorption, which significantly slowed down the catalyst poisoning. A dynamic equilibrium between the poisoning and regeneration process can be achieved according to the shrinking-core model for each nanosphere, leading to the excellent resistance.

A critical review on relationship of CeO2-based photocatalyst towards mechanistic degradation of organic pollutant

Nanostructured photocatalysts commonly offered opportunities to solve issues scrutinized with the environmental challenges caused by steep population growth and rapid urbanization. This photocatalyst is a controllable characteristic, which can provide humans with a clean and sustainable ecosystem. Over the last decades, one of the current thriving research focuses on visible-light-driven CeO₂-based photocatalysts due to their superior characteristics, including unique fluorite-type structure, rigid framework, and facile reducing oxidizing properties of cerium's tetravalent (Ce⁴⁺) and trivalent (Ce³⁺) valence states. Notwithstanding, owing to its inherent wide energy gap, the solar energy utilization efficiency is low, which limits its application in wastewater treatment. Numerous modifications of CeO₂ have been employed to enhance photodegradation performances, such as metals and non-metals doping, adding support materials, and coupling with another semiconductor. Besides, all these doping will form a different heterojunction and show a different way of electron-hole migration. Compared to conventional heterojunction, advanced heterojunction types such as p-n heterojunction, Z-scheme, Schottky junction, and surface plasmon resonance effect exhibit superior performance for degradation owing to their excellent charge carrier separation, and the reaction occurs at a relatively higher redox potential. This review attends to providing deep insights on heterojunction mechanisms and the latest progress on photodegradation of various contaminants in wastewater using CeO₂-based photocatalysts. Hence, making the CeO₂ photocatalyst more foresee and promising to further development and research.

GO-CeO₂ nanohybrid for ultra-rapid fluoride removal from drinking water

The presence of excess fluoride (F^- > 1.5 mg/L) in drinking water affects more than 260 million people globally and leads to dental and skeletal fluorosis among other health problems. This study investigated fluoride removal by graphene oxide-ceria nanohybrid (GO-CeO₂) and elucidated the mechanisms involved. The nanohybrid exhibited ultra-rapid kinetics for fluoride removal and the equilibrium (85% removal, 10 mg F^-/L initial concentration) was achieved within 1 min which is one of the fastest kinetics for fluoride removal reported so far. Fluoride removal by the nanohybrid followed Langmuir isotherm with a maximum adsorption capacity of 8.61 mg/g at pH 6.5 and that increased to 16.07 mg/g when the pH was lowered to 4.0. Based on the experimental results and characterization data, we have postulated that both electrostatic interaction and surface complexation participated in the fluoride removal process. The O^2- ions present in the CeO₂ lattice were replaced by F^- ions to make a coordination compound (complex). While both Ce⁴⁺ and Ce³⁺ were present in ceria nanoparticles (CeO₂ NPs), Ce³⁺ participated in fluoride complexation. During fluoride removal by GO-CeO₂, the GO sheets acted as electron mediators and help to reduce Ce⁴⁺ to Ce³⁺ at the CeO₂ NPs-GO interface, and the additional Ce³⁺ enhanced fluoride removal by the nanohybrid.

Fast synthesis of porous iron doped CeO2 with oxygen vacancy for effective CO2 photoreduction

The activity of photocatalytic CO₂ conversion to carbon-containing products is determined by the adsorption and activation of CO₂ molecules on the surface of catalyst. Here, iron doped porous CeO₂ with oxygen vacancy (PFeCe) was prepared by one-step combustion method. The amount of CO₂ adsorbed via using the porous structure has been significantly increased in the case of a relatively small specific surface area and CO₂ molecules are more easily captured and undergo a reduction reaction with photoinduced carriers. In addition, oxygen vacancies are formed in the iron doped CeO₂ lattice as the active sites for CO₂ reduction, which can form strong interactions with CO₂ molecules, thereby effectively activating CO₂ molecules. The reduction products of CO₂ over PFeCe composite are CO and CH₄, which is approximately 9.0 and 7.7 folds than that of CeO₂. This work offers insights for the construction of efficient ceria-based photocatalysts to further achieve robust solar CO₂ conversion.

Soot combustion over CeO2 catalyst: the influence of biodiesel impurities (Na, K, Ca, P) on surface chemical properties

This work assessed the impact of biodiesel impurities on CeO2 catalyst for soot combustion via soot-TPO experiments. The results showed that Na- and K-doped catalysts were assisted for soot combustion, while Ca- and P-doped catalysts had a negative effect. N2 adsorption-desorption and XRD results indicated that doping biodiesel impurities led to smaller surface area by blocking small pores. Surface chemical properties are suggested as major reasons for promoting soot combustion by means of XPS, H2-TPR, and O2-TPD. Na- and K-doped catalysts showed stronger redox ability and surface lattice oxygen mobility, poorly for Ca- and P-doped catalysts. Interestingly, a large number of surface oxygen species were observed on P-doped catalyst and it enhanced the ignition of bio soot. In the presence of NO, surface chemical properties including NOx storage/release capacity and NO oxidation ability were characterized by NO-adsorption DRIFTS, NO-TPO and NOx-desorption DRIFTS, alkali-doped catalyst with excellent NOx storage capacity that can release active oxygen species and gaseous NO2 accelerate heterogeneous soot combustion, and the poor NO conversion ability to NO2 that weakens the promotion effect of soot combustion. Particularly in the existence of P, the promotion effect of soot elimination in NO + O2 was further weakened by the reason of poor NOx storage capacity and NO oxidation ability.

Crystal plane effect of ceria on supported copper catalyst for liquid-phase hydrogenation of unsaturated aldehyde

Ceria has been widely used as catalyst support displaying a size- or shape-dependent catalytic performance due to the strong metal-support interaction (SMSI) effect with active metal. Almost all the studies on the SMSI effect of ceria-supported metal catalysts are involved generally in gas-phase reaction, but rarely in the liquid-phase reaction system. In this work, Cu/CeO₂-P (copper loaded on nano-polyhedral CeO₂ with (111) terminated surface) was investigated its catalytic performance on liquid-phase hydrogenation and studied the SMSI effect by comparing with the catalysts supported on nano-rod and nano-cube CeO₂. It was found that Cu was highly dispersed on the external surface of ceria in the Cu/CeO₂-P catalyst via a moderate SMSI effect. Furthermore, the degree of the interaction showed great influence on the chemical state of Cu species, and the ratio of (Cu⁺+Cu⁰)/Cu²⁺ in Cu/CeO₂-P was higher than Cu/CeO₂-R (Cu loaded on nano-rod CeO₂ with (110) plane) and Cu/CeO₂-C (Cu loaded on nano-cube CeO₂ with (100) facet). As a result, the Cu/CeO₂-P catalyst showed the best catalytic performance among three types of catalysts. Based on series of catalytic investigations, the catalytic performance in liquid-phase hydrogenation was intrinsically relevant to the crystal plane effect and reduced Cu proportion induced by an appropriate SMSI effect, which was completely different from gas-phase hydrogenation.

Impact of morphology and collagen-functionalization on the redox equilibria of nanoceria for cancer therapies

The application of nanoparticulate therapies for cancer depends largely on the uptake and redox activity of the particles. The present work reports the fabrication of different morphologies of nanoceria (CeO_2-x) as nanooctahedra (NO), nanorods (NR), and nanocubes (NC) by hydrothermal synthesis at different temperatures (100 °C, 180 °C) of solutions of 0.05 M Ce(NO₃)₃·6H₂O and different concentrations of NaOH (0.01 M, 6.00 M). The characteristics of these nanomorphologies are compared in terms of the crystallinity (XRD), grain size (TEM), surface area (BET), tendency to agglomerate, and the oxygen vacancy concentration ([V_O^••]) as reflected by the [Ce³⁺]/[Ce⁴⁺] ratio (XPS). The effects of these parameters on the potential cellular uptake are canvassed, suggesting that the nonpolarity of the {111} planes of NO and NR facilitate the preferential uptake of these nanomorphologies. These experimental variables then were normalized through the use of NC as a model substrate for the functionalization using gum arabic (GA) and collagen in order to assess their roles in enhancing redox activity. Both the unfunctionalized and functionalized NC were noncytotoxic in in vitro tests with Kuramochi ovarian cancer cells. However, the antioxidant behavior of the collagen-functionalized NC was superior to that of the unfunctionalized NC, which was superior to that of the controls. These results demonstrate that, while the intrinsic V_O^•• of CeO_2-x enhance the destruction of reactive oxygen species (ROS), functionalization by gum arabic and collagen crosslinking as extrinsic additions to the system enhances ROS destruction to an even greater extent. The antioxidant behavior and potential to neutralize superoxide and hydroxyl radicals of these materials offers new potential for the improvement of nanoparticulate cancer therapies.

Thermally stable surfactant-free ceria nanocubes in silica aerogel

Surfactant-mediated chemical routes allow one to synthesize highly engineered shape- and size-controlled nanocrystals. However, the occurrence of capping agents on the surface of the nanocrystals is undesirable for selected applications. Here, a novel approach to the production of shape-controlled nanocrystals which exhibit high thermal stability is demonstrated. Ceria nanocubes obtained by surfactant-mediated synthesis are embedded inside a highly porous silica aerogel and thermally treated to remove the capping agent. Powder X-ray Diffraction and Scanning Transmission Electron Microscopy show the homogeneous dispersion of the nanocubes within the aerogel matrix. Remarkably, both the size and the shape of the ceria nanocubes are retained not only throughout the aerogel syntheses but also upon thermal treatments up to 900 °C, while avoiding their agglomeration. The reactivity of ceria is measured by in situ High-Energy Resolution Fluorescence Detected - X-ray Absorption Near Edge Spectroscopy at the Ce L₃ edge, and shows the reversibility of redox cycles of ceria nanocubes when they are embedded in the aerogel. This demonstrates that the enhanced reactivity due to their prominent {100} crystal facets is preserved. In contrast, unsupported ceria nanocubes begin to agglomerate as soon as the capping agent decomposes, leading to a degradation of their reactivity already at 275 °C.

CeO2 grafted with different heteropoly acids for selective catalytic reduction of NOx with NH3

The CeO₂ catalysts grafted with heteropoly acid (i.e., HPA) could enhance their catalytic performance for selective catalytic reduction of NO_x with NH₃ (NH₃-SCR). In comparison to HSiW/CeO₂, HPMo/CeO₂, and commercial V₂O₅-WO₃/TiO_x catalysts, HPW/CeO₂ catalysts showed the best SCR performance. XPS and DRIFTS demonstrated that the amount of HPA on HPW/CeO₂ was more than those on HSiW/CeO₂ and HPMo/CeO₂. H₂-TPR results indicated that reducibility of HPMo/CeO₂ was stronger than those of HSiW/CeO₂ and HPW/CeO₂, resulting in the high-temperature performance loss. According to kinetic results, below 250 °C, k_SCR-ER and k_SCR-LH of HPW/CeO₂ were higher than those of HSiW/CeO₂, meanwhile k_side of both HSiW/CeO₂ and HPW/CeO₂ were low. Therefore, HPW/CeO₂ had the better SCR performance than HSiW/CeO₂. As NH₃ was completely consumed, SCR activity depended on the ratio of SCR reaction in the consumption of NH₃. The selectivity of SCR reaction, NSCR reaction, and C-O reaction of HSiW/CeO₂ were almost the same as those of HPW/CeO₂ above 250 °C, resulting in the NO_x conversion of HPW/CeO₂ was basically the same as that of HSiW/CeO₂ above 250 °C. Due to the lowest k_SCR-ER and k_SCR-LH, and highest k_side, NO_x conversion of HPMo/CeO₂ was the worst compared to HSiW/CeO₂ and HPW/CeO₂ catalysts.

Ceria decorated porous diatom-xerogel as an effective adsorbent for the efficient removal of Eriochrome Black T

Diatomaceous earth or diatom (DE) are naturally available and low cost micro particles with distinct porous structure were used as an adsorbent for the removal of a hazardous dye, Eriochrome Black T (EBT). The surface modification of these DE were performed by sol-gel and hydrothermal methods to obtain a series of adsorbents such as diatom-ceria (DC), diatom-silica xerogel (DX), and diatom-silica xerogel-ceria (DXC). A cauliflower like morphology structure of ceria was observed on DE and DX. The adsorption performance of EBT was conducted by varying various parameters such as pH, adsorbent dosage, initial concentration, contact time and ionic strength. The materials DE, DC, DX and DXC showed the EBT removal efficiencies of 52, 77, 20, and 93%, respectively. The maximum adsorption capacity (qm) of DE, DC, DX and DXC was found to be 13.83, 23.64, 0.2 and 47.02 mgg^-1 for the adsorption of EBT, respectively. The selectivity of EBT towards DXC was evaluated by treating a mixture of anionic dyes. The dye removal experiments was performed in presence of inorganic salts, however the presence of these salts did not affect the removal efficiency of DXC. Furthermore, the reusability of DXC was studied by recycling it up to 5 times and even at 5th cycle a removal efficiency of ∼66.8% was found. Thus, these studies demonstrate that the DXC material could be a promising candidate for the removal of EBT via adsorption for real time application in water treatment.

Improved pyrolysis behavior of ammonium polyphosphate-melamine-expandable (APP-MEL-EG) intumescent fire retardant coating system using ceria and dolomite as additives for I-beam steel application

This study describes the effects of ceria (CeO₂) and dolomite [CaMg(CO₃)₂] additives on the pyrolysis behavior and fire resistive property of conventional intumescent flame retardant (IFR) coating system for I-beam steel substrate called ammonium polyphosphate-melamine-expandable graphite (APP-MEL-EG) system. The fire resistance of various formulations was evaluated using the standard vertical Bunsen burner fire test. Thermogravimetric analysis (TGA) was used to understand the degradation of coating formulations. Observations by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) demonstrated that significant amounts of additives favored the formation of homogeneous compacted char structures, which were predominantly composed of carbon (C), phosphorus (P) and oxygen (O). These three main components of the char were also found to be in various binding combinations with other lighter elements like nitrogen (N) and hydrogen (H) as illustrated by the attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy results. X-ray photoelectron spectroscopy (XPS) further suggest that polyethylene([(CH₂–C₂H₂–CH₂)ⁿ⁻]) free radicals were abundant on the char surface for the two best formulations and the binding energy of this radical promoted the formation of aromatic carbon chains that enhanced the char's thermal stability. This means that the selection of appropriate additives and combinations of flame-retardant ingredients could significantly change the morphology of the char layer and improve its thermal stability during fire exposure.

CeO2/C nanowire derived from a cerium(III) based organic framework as a peroxidase mimic for colorimetric sensing of hydrogen peroxide and for enzymatic sensing of glucose

A metal organic framework obtained from cerium(III) and trimesic acid was pyrolyzed to obtain a novel nanostructure referred to as CeO₂/C nanowires. The experimental parameters temperature, precursor and gas atmosphere were optimized. The nanowires show good dispersion and a large number of oxygen vacancies, and this leads to excellent peroxidase-like activity. The nanowires are stable at pH values between 2 and 10, and in the 4-80 °C temperature range. The peroxidase-mimicking activity was exploited in a sensitive colorimetric method for determination of H₂O₂ by using 3,3',5,5'-tetramethylbenzidine as the chromogenic substrate. The absorbance at 652 nm increases linearly in the 0.5 to 100 μM H₂O₂ concentration range. If glucose oxidase is added to a solution containing glucose, H₂O₂ will be enzymatically produced. This was exploited to design a new method for determination of glucose. The optical response is linear in the 1-100 μM glucose concentration range, and the detection limit is 0.69 μM (at S/N = 3). The method was successfully applied to the determination of glucose in serum samples. Graphical abstractCeO₂/C nanowires prepared by Ce-MOF pyrolysis show peroxidase-like activity and are able to catalyze the oxidation of tetramethylbenzidine (TMB) by H₂O₂. This was applied to glucose oxidase-based colorimetruc determination of glucose in human sera.

Bio-Orthogonal Bacterial Reactor for Remission of Heavy Metal Poisoning and ROS Elimination

Multitudinous industrial products in daily life put human health at risk of heavy metal exposure, and natural bacteria have displayed superior performance in bioadsorption and biodegradation of heavy metal. In this study, a bacteria-based bioreactor is developed to precisely bioadsorb lead (Pb) ions, eliminate concomitant reactive oxygen species (ROS), and remit the injury of acute/chronic Pb poisoning. A nonpathogenic bacteria Escherichia coli MG1655 (Bac) is decorated with antioxidative cerium oxide nanoparticles (Ceria) on the surface through a bio-orthogonal reaction, and the complex bioreactor could spontaneously aggregate in organs with high concentration of Pb. Furthermore, the excess Pb is bioadsorbed by bacteria and the concomitant ROS is eliminated by Ceria nanoparticles. In vitro and in vivo studies demonstrate that this integral biotic/abiotic hybrid bioreactor successfully realizes detoxication of Pb and reparation of injury, also accompanied with inappreciable side effects.

Surface treatments on titanium implants via nanostructured ceria for antibacterial and anti-inflammatory capabilities

Peri-implantitis is the most common risk factor for dental implant failure. Nanostructured ceria (nano-CeO₂) has anti-inflammatory and antibacterial functions, and different shapes of ceria enclosed by specific crystal planes could be an effective approach to enhance intrinsic catalysis. In the present study, the authors developed a novel implant surface-modification strategy by coating different shapes of nano-CeO₂ onto titanium (Ti) surfaces to enhance their antibacterial and anti-inflammatory properties. The objectives of the study were to: (1) develop novel Ti surfaces modified with different shapes of nano-CeO₂ (nanorod, nanocube and nano-octahedron) for peri-implantitis prevention; (2) investigate and compare the inhibition efficacy of different shapes of CeO₂-modified surfaces against biofilms of peri-implantitis-related pathogens; and (3) evaluate the different CeO₂-modified surfaces on cell inflammatory response in vitro and in vivo. The results showed that nanorod CeO₂-modified Ti had more bacteria attachment of Streptococcus sanguinis in the early stage, compared with other CeO₂-modified Ti (p < 0.05). They all exhibited similarly substantial CFU reductions against peri-implantitis-related biofilms (p > 0.1). Nanocube and nano-octahedron CeO₂-modified Ti exerted much better anti-inflammatory effects and ROS-scavenging ability than nanorod CeO₂in vitro (p < 0.05). In vivo, the mean mRNA expression of TNF-α, IL-6 and IL-1β in the tissues around Ti was decreased by the three shapes of nano-CeO₂; nano-octahedron CeO₂ showed the strongest anti-inflammatory effect among all groups (p < 0.05). In conclusion, all three types of CeO₂-modified Ti exerted equally strong antibacterial properties; nano-octahedron CeO₂-modified Ti had the best anti-inflammatory effect. Therefore, CeO₂-modified Ti surfaces are highly promising for enhancing antimicrobial functions for dental implants. Novel nano-octahedron CeO₂ coating on Ti had great therapeutic potential for alleviating and eliminating peri-implantitis. STATEMENT OF SIGNIFICANCE: Peri-implantitis is the most common risk factor for dental implant failure. Nanostructured ceria (nano-CeO₂) has anti-inflammatory and antibacterial functions, and different shapes of ceria enclosed by specific crystal planes could be an effective approach to enhance intrinsic catalysis. In the present study, we developed a novel implant surface-modification strategy by coating different shapes of nano-CeO₂ onto titanium surfaces to enhance their antibacterial and anti-inflammatory properties for dental implants. In addition, we found that the nano-octahedron CeO₂ coating on titanium would have great therapeutic potential for alleviating and eliminating peri-implantitis.

Microwave mediated synthesis and characterization of CeO2-GO hybrid composite for removal of chromium ions and its antibacterial efficiency

A facile fabrication and processing of cerium oxide-graphene oxide (CeO₂-GO) hybrid nanocomposites without the use of any surfactant or any organic solvents using chemical method and treatment with microwave irradiation technique are reported. In-situ hexagonal nano cerium oxide particles embedded on the layered surface of GO sheets were investigated for the photodegradation of dyes, removal of chromium Cr(VI) ions and against antibacterial studies. The results imply that hybrid nanocomposites shows enhanced 5-folds of photocatalytic activities in UV (ultraviolet) light irradiation and exhibited rapid efficiency in the elimination of chromium ion better than the pure GO and CeO₂, which are inhibited by competent photosensitive electron inoculation and controlling the electron-hole recombination. The synergetic effect of CeO₂-GO composites played a vital role in showing better results against model bacterium than GO and CeO₂ are due to higher physical interaction endorsed to the stress of membranes acute by piercing edges, large surface area, and higher adsorptive conditions of graphene oxide sheets tailored with ceria particles. The amount of charge transferred at the interface increases with the concentration of O atoms, demonstrating the interaction between CeO₂ and GO is much stronger than CeO₂ and GO are due to the decrease of the average equilibrium distance between the interfaces. The CeO₂-GO interface staggered band alignments existing between the CeO₂ surfaces and GO which shows an excellent synergism. The structure and morphology of composites were tested by X-ray diffraction (XRD), Fourier transform infrared (FTIR), Raman, X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscope (HR-TEM).

Effect of lanthanum loading on nanosized CeO2-ZnO solid catalysts supported on cordierite for diesel soot oxidation

We report the application of a solid lanthanum-ceria-zinc catalyst in the catalytic regeneration of diesel particulate filters (DPF) in diesel engines. We synthesized a CeO₂-ZnO-La₂O₃ (Ce-Zn-La) mixed oxide by a lactic acid-mediated sol-gel method, which efficiently coated cordierite substrates for soot capture and combustion. We studied the effects of La loading on the physicochemical and catalytic properties of Ce-Zn mixed oxide during low-temperature soot combustion processes. We characterized the synthesized catalysts by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), N₂ adsorption, Raman spectroscopy, oxygen storage capacity (OSC), and scanning and transmission electron microscopy (SEM and TEM). Thermogravimetric and differential thermal analysis (TGA/DTA) confirmed that the catalysts effectively reduced the soot oxidation temperature. The ternary Ce-Zn-La mixed oxide catalyst with Ce/Zn/La atomic ratio of 2:1:0.5 had the highest catalytic activity and promoted soot oxidation at temperatures below 390°C. This indicated that the large number of oxygen vacancies in the catalyst structure generated oxygen species at low temperatures. Raman spectroscopy measurements revealed the presence of oxygen vacancies and lattice defects in Ce-Zn-La samples, which were key parameters concerning the stability and redox properties of the prepared catalysts.

A new insight into the theoretical design of highly dispersed and stable ceria supported metal nanoparticles

How to design and develop ceria supported metal nanoparticles (M/CeO₂) catalysts with high performance and sintering resistance is a great challenge in heterogeneous catalysis and surface science. In the present work, we propose two ways to improve the anti-sintering capability of M/CeO₂ catalysts. One is to introduce Ti atom on CeO₂ (1 1 1) to form monatomically dispersed Ti, TiO_x or TiO₂-like species on ceria. Density functional theory calculations show that the much stronger interactions between Au and Ti modified CeO₂ (1 1 1) occur compared with that on CeO₂ (1 1 1). According to the electronic analysis, the strong interactions are attributed to the electron transfer from the Ti modified ceria substrate to Au. The other is to dope Ti into CeO₂ (1 1 1) to form Ti_xCe_1-xO₂. This also leads to the interaction enhancement between Au and Ti_xCe_1-xO₂ (1 1 1). Electronic analysis indicates that the charge protuberance of surface O atoms near Ti atom results in the strong interactions between metal and ceria. This work provides new ideas for preparing M/CeO₂ catalysts with high dispersity and stability, and sheds light into the theoretical design of catalysts.

Dermal transfer and environmental release of CeO2 nanoparticles used as UV inhibitors on outdoor surfaces: Implications for human and environmental health

A major area of growth for "nano-enabled" consumer products have been surface coatings, including paints stains and sealants. Ceria (CeO₂) nanoparticles (NPs) are of interest as they have been used as additives in these these products to increase UV resistance. Currently, there is a lack of detailed information on the potential release, and speciation (i.e., ion vs. particle) of CeO₂ NPs used in consumer-available surface coatings during intended use scenarios. In this study, both Micronized-Copper Azole pressure-treated lumber (MCA), and a commercially available composite decking were coated with CeO₂ NPs dispersed in Milli-Q water or wood stain. Coated surfaces were divided into two groups. The first was placed outdoors to undergo environmental weathering, while the second was placed indoors to act as experimental controls. Both weathered surfaces and controls were sampled over a period of 6months via simulated dermal contact using methods developed by the Consumer Product Safety Commission (CPSC). The size and speciation of material released was determined through sequential filtration, total metals analysis, X-Ray Absorption Fine Structure Spectroscopy, and electron microscopy. The total ceria release from MCA coated surfaces was found to be dependent on dispersion matrix with aqueous applications releasing greater quantities of CeO₂ than stain based applications, 66±12mg/m² and 36±7mg/m², respectively. Additionally, a substantial quantity of CeO₂ was reduced to Ce(III), present as Ce(III)-organic complexes, over the 6-month experimental period in aqueous based applications.

Exploiting micro-scale structural and chemical observations in real time for understanding chemical conversion: LEEM/PEEM studies over CeOx-Cu(111)

Proper consideration of length-scales is critical for elucidating active sites/phases in heterogeneous catalysis, revealing chemical function of surfaces and identifying fundamental steps of chemical reactions. Using the example of ceria thin films deposited on the Cu(111) surface, we demonstrate the benefits of multi length-scale experimental framework for understanding chemical conversion. Specifically, exploiting the tunable sampling and spatial resolution of photoemission electron microscopy, we reveal crystal defect mediated structures of inhomogeneous copper-ceria mixed phase that grow during preparation of ceria/Cu(111) model systems. The density of the microsized structures is such that they are relevant to the chemistry, but unlikely to be found during investigation at the nanoscale or with atomic level investigations. Our findings highlight the importance of accessing micro-scale when considering chemical pathways over heteroepitaxially grown model systems.

Nanoscale analysis of the oxidation state and surface termination of praseodymium oxide ultrathin films on ruthenium(0001)

The complex structure and morphology of ultrathin praseodymia films deposited on a ruthenium(0001) single crystal substrate by reactive molecular beam epitaxy is analyzed by intensity-voltage low-energy electron microscopy in combination with theoretical calculations within an ab initio scattering theory. A rich coexistence of various nanoscale crystalline surface structures is identified for the as-grown samples, notably comprising two distinct oxygen-terminated hexagonal Pr₂O₃(0001) surface phases as well as a cubic Pr₂O₃(111) and a fluorite PrO₂(111) surface component. Furthermore, scattering theory reveals a striking similarity between the electron reflectivity spectra of praseodymia and ceria due to very efficient screening of the nuclear charge by the extra 4f electron in the former case.

Chemicals from ethanol: the acetone synthesis from ethanol employing Ce0.75Zr0.25O2, ZrO2 and Cu/ZnO/Al2O3

Acetone is an important solvent and widely used in the synthesis of drugs and polymers. Currently, acetone is mainly generated by the Cumene Process, which employs benzene and propylene as fossil raw materials. Phenol is a co-product of this synthesis. However, this ketone can be generated from ethanol (a renewable feedstock) in one-step. The aim of this work is to describe the influence of physical–chemical properties of three different catalysts on each step of this reaction. Furthermore, contribute to improve the description of the mechanism of this synthesis. The acetone synthesis from ethanol was studied employing Cu/ZnO/Al₂O₃, Ce_0.75Zr_0.25O₂ and ZrO₂. It was verified that the acidity of the catalysts needs fine-tuning in order to promote the oxygenate species adsorption and avoid the dehydration of ethanol. The higher the reducibility and the H₂O dissociation activity of the catalysts are, the higher the selectivity to acetone is. In relation to the oxides, these properties are associated with the presence of O vacancies. The H₂ generation, which occurs during the TPSR, indicates the redox character of this synthesis. The main steps of the acetone synthesis from ethanol are the generation of acetaldehyde, the oxidation of this aldehyde to acetate species (which reduces the catalyst), the H₂O dissociation, the oxidation of the catalyst producing H₂, and, finally, the ketonization reaction. These pieces of information will support the development of active catalysts for not only the acetone synthesis from ethanol, but also the isobutene and propylene syntheses in which this ketone is an intermediate.Graphical abstract

Interactional effect of cerium and manganese on NO catalytic oxidation

To preferably catalyze the oxidation of NO to NO₂ in diesel after-treatment system, a series of CeO₂-MnO _x composite oxides was supported on silica-alumina material by the co-impregnation method. The maximum conversion of NO of the catalyst with a Ce/Mn weight ratio of 5:5 was improved by around 40%, compared to the supported manganese-only or cerium-only sample. And its maximum reaction rate was 0.056 μmol g^-1 s^-1 at 250 °C at the gas hourly space velocity of 30,000 h^-1. The experimental results suggested that Ce-Mn solid solution was formed, which could modulate the valence state of cerium and manganese and exhibit great redox properties. Moreover, the strong interaction between ceria and manganese resulted in the largest desorption amount of strong chemical oxygen and oxygen vacancies, leading to the maximum O _α area ratio of 62.26% from the O 1s result. These effective oxygen species could be continually transferred to the surface, leading to the best NO catalytic activity of 5Ce5Mn/SA catalyst. Graphical abstract.

Damage assessment for soybean cultivated in soil with either CeO2 or ZnO manufactured nanomaterials

With increasing use, manufactured nanomaterials (MNMs) may enter soils and impact agriculture. Herein, soybean (Glycine max) was grown in soil amended with either nano-CeO2 (0.1, 0.5, or 1.0gkg-1 soil) or nano-ZnO (0.05, 0.1, or 0.5gkg-1 soil). Leaf chlorosis, necrosis, and photosystem II (PSII) quantum efficiency were monitored during plant growth. Seed protein and protein carbonyl, plus leaf chlorophyll, reactive oxygen species (ROS), lipid peroxidation, and genotoxicity were measured for plants at harvest. Neither PSII quantum efficiency, seed protein, nor protein carbonyl indicated negative MNM effects. However, increased ROS, lipid peroxidation, and visible damage, along with decreased total chlorophyll concentrations, were observed for soybean leaves in the nano-CeO2 treatments. These effects correlated to aboveground leaf, pod, and stem production, and to root nodule N2 fixation potential. Soybeans grown in soil amended with nano-ZnO maintained growth, yield, and N2 fixation potential similarly to the controls, without increased leaf ROS or lipid peroxidation. Leaf damage was observed for the nano-ZnO treatments, and genotoxicity appeared for the highest nano-ZnO treatment, but only for one plant. Total chlorophyll concentrations decreased with increasing leaf Zn concentration, which was attributable to zinc complexes-not nano-ZnO-in the leaves. Overall, nano-ZnO and nano-CeO2 amended to soils differentially triggered aboveground soybean leaf stress and damage. However, the consequences of leaf stress and damage to N2 fixation, plant growth, and yield were only observed for nano-CeO2.

Catalytic Oxidation of CO and Soot over Ce-Zr-Pr Mixed Oxides Synthesized in a Multi-Inlet Vortex Reactor: Effect of Structural Defects on the Catalytic Activity

In the present work, ceria, ceria-zirconia (Ce = 80 at.%, Zr = 20 at.%), ceria praseodymia (Ce = 80 at.%, Pr = 20 at.%) and ceria-zirconia-praseodymia catalysts (Ce = 80 at.%, Zr = 10 at.% and Pr = 10 at.%) have been prepared by the multi-inlet vortex reactor (MIVR). For each set of samples, two inlet flow rates have been used during the synthesis (namely, 2 ml min^-1_, and 20 ml min^-1) in order to obtain different particle sizes. Catalytic activity of the prepared materials has been investigated for CO and soot oxidation reactions. As a result, when the catalysts exhibit similar crystallite sizes (in the 7.7-8.8 nm range), it is possible to observe a direct correlation between the O_v/F_2g vibrational band intensity ratios and the catalytic performance for the CO oxidation. This means that structural (superficial) defects play a key role for this process. The incorporation of Zr and Pr species into the ceria lattice increases the population of structural defects, as measured by Raman spectroscopy, according to the order: CeO₂ < Ce₈₀Zr₂₀ < Ce₈₀Zr₁₀Pr₁₀ < Ce₈₀Pr₂₀. On the other hand, the presence of zirconium and praseodymium into the ceria lattice does not have a direct beneficial effect on the soot oxidation activity for these catalysts, in contrast with nanostructured ones (e.g., Ce-Zr-O nanopolyhedra, Ce-Pr-O nanocubes) described elsewhere (Andana et al. Appl. Catal. B 197: 125-137, 2016; Piumetti et al., Appl Catal B 180: 271-282, 2016).

CO and Soot Oxidation over Ce-Zr-Pr Oxide Catalysts

A set of ceria, ceria-zirconia (Ce 80 at.%, Zr 20 at.%), ceria-praseodymia (Ce 80 at.%, Pr 20 at.%) and ceria-zirconia-praseodymia (Ce 80 at.%, Zr 10 at.% and Pr 10 at.%) catalysts has been prepared by the solution combustion synthesis (SCS). The effects of Zr and Pr as dopants on ceria have been studied in CO and soot oxidation reactions. All the prepared catalysts have been characterized by complementary techniques, including XRD, FESEM, N2 physisorption at -196 °C, H2-temperature-programmed reduction, and X-ray photoelectron spectroscopy to investigate the relationships between the structure and composition of materials and their catalytic performance. Better results for CO oxidation have been obtained with mixed oxides (performance scale, Ce80Zr10Pr10 > Ce80Zr20 > Ce80Pr20) rather than pure ceria, thus confirming the beneficial role of multicomponent catalysts for this prototypical reaction. Since CO oxidation occurs via a Mars-van Krevelen (MvK)-type mechanism over ceria-based catalysts, it appears that the presence of both Zr and Pr species into the ceria framework improves the oxidation activity, via collective properties, such as electrical conductivity and surface or bulk oxygen anion mobility. On the other hand, this positive effect becomes less prominent in soot oxidation, since the effect of catalyst morphology prevails.

Ceria promoted deoxygenation and denitrogenation of Thalassiosira weissflogii and its model compounds by catalytic in-situ pyrolysis

Pyrolysis of microcrystalline cellulose, egg white powder, palm-jojoba oils mixtures Thalassiosira weissflogii model compounds was performed with CeO2 at 500°C, to evaluate its catalytic upgrading mechanism. Light organics, aromatics and aliphatics were originated from carbohydrates, proteins and lipids, respectively. Dehydration and decarboxylation were the main reactions involved in the algae and model compounds deoxygenation, while nitrogen was removed as NH3 and HCN. CeO2 increased decarbonylation reactions compared to in absence of catalyst, with production of ketones. The results showed that the catalysts had a significant effect on the pyrolysis products composition of T. weissflogii. CeO2, NiCeAl2O3 and MgCe/Al2O3 catalysts increased the aliphatics and decreased the oxygen content in bio-oils to 6-7 wt% of the algae starting O2 content. Ceria catalysts were also able to consistently reduce the N-content in the bio-oil to 20-38% of that in the parent material, with NiCe/Al2O3 being the most effective.

Nannochloropsis algae pyrolysis with ceria-based catalysts for production of high-quality bio-oils

Pyrolysis of Nannochloropsis was carried out in a fixed-bed reactor with newly prepared ceria based catalysts. The effects of pyrolysis parameters such as temperature and catalysts on product yields were investigated. The amount of bio-char, bio-oil and gas products, as well as the compositions of the resulting bio-oils was determined. The results showed that both temperature and catalyst had significant effects on conversion of Nannochloropsis into solid, liquid and gas products. The highest bio-oil yield (23.28 wt%) and deoxygenation effect was obtained in the presence of Ni-Ce/Al2O3 as catalyst at 500°C. Ni-Ce/Al2O3 was able to retain 59% of the alga starting energy in the bio-oil, compared to only 41% in absence of catalyst. Lower content of acids and oxygen in the bio-oil, higher aliphatics (62%), combined with HHV show promise for production of high-quality bio-oil from Nannochloropsis via Ni-Ce/Al2O3 catalytic pyrolysis.

Catalytic hydrodechlorination of trichloroethylene in a novel NaOH/2-propanol/methanol/water system on ceria-supported Pd and Rh catalysts

The catalytic hydrodechlorination (HDC) of high concentrations of trichloroethylene (TCE) (4.9 mol%, 11.6 vol%) was studied over 1%Pd, 1%Rh and 0.5%Pd-0.5%Rh catalysts supported on CeO2 under conditions of room temperature and pressure. For this, a one-phase system of NaOH/2-propanol/methanol/water was designed with molar percentages of 13.2/17.5/36.9/27.6, respectively. In this system, the alcohols delivered the hydrogen required for the reaction through in-situ dehydrogenation reactions. PdRh/CeO2 was the most active catalyst for the degradation of TCE among the evaluated materials, degrading 85% of the trichloroethylene, with alcohol dehydrogenation rates of 89% for 2-propanol and 83% for methanol after 1 h of reaction. Fresh and used catalysts were characterized by Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), and Thermogravimetric analysis (TGA). These results showed important differences of the active phase in each catalyst sample. Rh/CeO2 had particle sizes smaller than 1 nm and the active metal was partially oxidized (Rh(0)/Rh(+δ) ratio of 0.43). This configuration showed to be suitable for alcohols dehydrogenation. On the contrary, Pd/CeO2 showed a Pd completed oxidized and with a mean particle size of 1.7 nm, which seemed to be unfavorable for both, alcohols dehydrogenation and TCE HDC. On PdRh/CeO2, active metals presented a mean particle size of 2.7 nm and more reduced metallic species, with ratios of Rh(0)/Rh(+δ) = 0.67 and Pd(0)/Pd(+δ) = 0.28, which showed to be suitable features for the TCE HDC. On the other hand, TGA results suggested some deposition of NaCl residues over the catalyst surfaces. Thus, the new reaction system using PdRh/CeO2 allowed for the degradation of high concentrations of the chlorinated compound by using in situ hydrogen liquid donors in a reaction at room temperature and pressure.