Designing inhaled protein therapeutics for topical lung delivery: what are the next steps?

A randomized, double-blind, Phase 1, single- and multiple-dose placebo-controlled study of the safety and pharmacokinetics of IN-006, an inhaled antibody treatment for COVID-19 in healthy volunteers

BACKGROUND

Although COVID-19 is predominantly a respiratory tract infection, current antibody treatments are administered by systemic dosing. We hypothesize that inhaled delivery of a monoclonal antibody may be a more effective and convenient route. We investigated the safety, tolerability, and pharmacokinetics of IN-006, a reformulation of regdanvimab for nebulized delivery by a handheld nebulizer.

METHODS

A Phase 1 study was conducted in healthy volunteers aged 18-55 a Phase 1 unit in Melbourne, Australia (ACTRN12621001235897). Study staff and participants were blinded to treatment assignment, except for pharmacy staff preparing the study drug. The ratio of active:placebo randomization to each cohort was set at 3:1. The primary outcomes were safety and tolerability. Exploratory outcomes were pharmacokinetics of IN-006 in nasal fluid and serum.

FINDINGS

Twenty-three participants were enrolled and randomized across two single dose and one multiple dose cohorts (30 mg or 90 mg single nebulized dose, or seven daily 90 mg doses). There were no serious adverse events. All enrolled participants completed the study without treatment interruption or discontinuation. All treatment-emergent adverse events were transient, non-dose dependent, and graded mild to moderate in severity. Nebulization was well-tolerated and completed in an average of 6 min. Geometric mean nasal fluid concentrations of IN-006 in the multiple dose cohort were 739.8 μg/mL at 30 min after dosing and 1.2 μg/mL at 22 h. Geometric mean serum levels in the multiple dose cohort peaked at 0.51 μg/mL 3 days after the final dose.

INTERPRETATION

IN-006 was well-tolerated and achieved concentrations in the respiratory tract orders of magnitude above the IC50 range typical of antiviral mAbs. These data support further development of nebulized delivery of antiviral mAbs for respiratory infectious disease.

FUNDING

This work was funded by the U.S. Army Medical Research and Development Command (W81XWH-15-9-0001) and regdanvimab was provided by Celltrion, Inc.

A breath of fresh air: inhaled antibodies to combat respiratory infectious diseases - a clinical trial overview

INTRODUCTION

With the worldwide growing burden of respiratory tract infections (RTIs), innovative therapeutic approaches are in high demand. Inhaled antibodies (Abs) represent a promising avenue, offering targeted treatment options with potentially better therapeutic index compared to traditional delivery methods.

AREAS COVERED

This comprehensive review summarizes the challenges faced in delivering Abs by (intranasal and pulmonary) inhalation. It outlines the physiological and biological barriers encountered by inhaled drugs, as well as the influence of delivery devices and formulation on the deposition and efficacy of inhaled molecules. Moreover, it provides a detailed overview of the current clinical trial landscape of inhaled anti-RTI Abs, highlighting the progress in the development of inhaled Abs targeting a range of pathogens, such as severe acute respiratory syndrome coronavirus 2 and respiratory syncytial virus. The mechanism of action, therapeutic targets, and clinical outcomes of these novel therapies are detailed.

EXPERT OPINION

Delivery of Abs by inhalation faces several challenges. Addressing these challenges and developing specific approaches to deliver inhaled Abs represent a promising avenue for the development of the next generation of inhaled Abs. By offering targeted, localized therapy with the potential for a better therapeutic index, inhaled Abs could significantly improve outcomes for patients with RTIs.

Targeted delivery of flagellin by nebulization offers optimized respiratory immunity and defense against pneumococcal pneumonia

Novel therapeutic strategies are urgently needed to combat pneumonia caused by Streptococcus pneumoniae strains resistant to standard-of-care antibiotics. Previous studies have shown that targeted stimulation of lung innate immune defenses through intranasal administration of the Toll-like receptor 5 agonist flagellin improves the treatment of pneumonia when combined with antibiotics. To promote translation to the clinic application, this study assessed the direct delivery of flagellin to the airways through nebulization using a vibrating mesh nebulizer in mice. Intranasal delivery achieved approximately 40% lung deposition of the administered flagellin dose, whereas nebulization yielded less than 1%. Despite these differences, nebulized flagellin induced transient activation of lung innate immunity characterized by cytokine/chemokine production and neutrophil infiltration into airways analogous to intranasal administration. Furthermore, inhalation by nebulization resulted in an accelerated resolution of systemic pro-inflammatory responses. Lastly, adjunct therapy combining nebulized flagellin and amoxicillin proved effective against antibiotic-resistant pneumococcal pneumonia in mice. We posit that flagellin aerosol therapy represents a safe and promising approach to address bacterial pneumonia within the context of antimicrobial resistance.

Respiratory delivered vaccines: Current status and perspectives in rational formulation design

The respiratory tract is susceptible to various infections and can be affected by many serious diseases. Vaccination is one of the most promising ways that prevent infectious diseases and treatment of some diseases such as malignancy. Direct delivery of vaccines to the respiratory tract could mimic the natural process of infection and shorten the delivery path, therefore unique mucosal immunity at the first line might be induced and the efficiency of delivery can be high. Despite considerable attempts at the development of respiratory vaccines, the rational formulation design still warrants attention, i.e., how the formulation composition, particle properties, formulation type (liquid or solid), and devices would influence the immune outcome. This article reviews the recent advances in the formulation design and development of respiratory vaccines. The focus is on the state of the art of delivering antigenic compounds through the respiratory tract, overcoming the pulmonary bio-barriers, enhancing delivery efficiencies of respiratory vaccines as well as maintaining the stability of vaccines during storage and use. The choice of devices and the influence of deposition sites on vaccine efficiencies were also reviewed.

Storage stability of lysostaphin solution and its pulmonary delivery

Methicillin-resistant Staphylococcus aureus (MRSA) has become a leading causative pathogen of nosocomial pneumonia with an alarming in-hospital mortality rate of 30%. Last resort antibiotic, vancomycin, has been increasingly used to treat MRSA infections, but the rapid emergence of vancomycin-resistant strains urges the development of alternative treatment strategies against MRSA-associated pneumonia. The bacteriolytic enzyme, lysostaphin, targeting the cell wall peptidoglycan of S. aureus, has been considered as a promising alternative for MRSA infections. Its proteinaceous nature is likely benefit from direct delivery to the lungs, but the challenges for successful pulmonary delivery of lysostaphin lying on a suitable inhalation device and a formulation with sufficient storage stability. In this study, the applicability of a vibrating mesh nebulizer (Aerogen Solo®) and a soft mist inhaler (Respimat®) was investigated. Both devices were capable of aerosolizing lysostaphin solution into inhalable droplets and caused minimum antibacterial activity loss. In addition, lysostaphin stabilized with phosphate-buffered saline and 0.1% Tween 80 was proved to have acceptable stability for at least 12 months when stored at 4 °C. These promising data encourage further clinical development of lysostaphin for management of MRSA-associated lung infections.

Solid Lipid Nanoparticles for Pulmonary Delivery of Biopharmaceuticals: A Review of Opportunities, Challenges, and Delivery Applications

Biopharmaceuticals such as nucleic acids, proteins, and peptides constitute a new array of treatment modalities for chronic ailments. Invasive routes remain the mainstay of administering biopharmaceuticals due to their labile nature in the biological environment. However, it is not preferred for long-term therapy due to the lack of patient adherence and clinical suitability. Therefore, alternative routes of administration are sought to utilize novel biopharmaceutical therapies to their utmost potential. Nanoparticle-mediated pulmonary delivery of biologics can facilitate both local and systemic disorders. Solid lipid nanoparticles (SLNs) afford many opportunities as pulmonary carriers due to their physicochemical stability and ability to incorporate both hydrophilic and hydrophobic moieties, thus allowing novel combinatorial drug/gene therapies. These applications include pulmonary infections, lung cancer, and cystic fibrosis, while systemic delivery of biomolecules, like insulin, is also attractive for the treatment of chronic ailments. This Review explores physiological and particle-associated factors affecting pulmonary delivery of biopharmaceuticals. It compares the advantages and limitations of SLNs as pulmonary nanocarriers along with design improvements underway to overcome these limitations. Current research illustrating various SLN designs to deliver proteins, peptides, plasmids, oligonucleotides, siRNA, and mRNA is also summarized.

SARS-CoV-2 evolution has increased resistance to monoclonal antibodies and first-generation COVID-19 vaccines: Is there a future therapeutic role for soluble ACE2 receptors for COVID-19?

COVID-19 has caused calamitous health, economic and societal consequences. Although several COVID-19 vaccines have received full authorization for use, global deployment has faced political, financial and logistical challenges. The efficacy of first-generation COVID-19 vaccines is waning and breakthrough infections are allowing ongoing transmission and evolution of SARS-CoV-2. Furthermore, COVID-19 vaccine efficacy relies on a functional immune system. Despite receiving three primary doses and three or more heterologous boosters, some immunocompromised patients may not be adequately protected by COVID-19 vaccines and remain vulnerable to severe disease. The evolution of new SARS-CoV-2 variants has also resulted in the rapid obsolescence of monoclonal antibodies. Convalescent plasma from COVID-19 survivors has produced inconsistent results. New drugs such as Paxlovid (nirmatrelvir/ritonavir) are beyond the reach of low- and middle-income countries. With widespread use of Paxlovid, it is likely nirmatrelvir-resistant clades of SARS-CoV-2 will emerge in the future. There is thus an urgent need for new effective anti-SARS-CoV-2 treatments. The in vitro efficacy of soluble ACE2 against multiple SARS-CoV-2 variants including omicron (B.1.1.529), was recently described using a competitive ELISA assay as a surrogate marker for virus neutralization. This indicates soluble wild-type ACE2 receptors are likely to be resistant to viral evolution. Nasal and inhaled treatment with soluble ACE2 receptors has abrogated severe disease in animal models of COVID-19. There is an urgent need for clinical trials of this new class of antiviral therapeutics, which could complement vaccines and Paxlovid.

Cavitation is the determining mechanism for the atomization of high-viscosity liquid

Piezoelectric atomization is becoming mainstream in the field of inhalation therapy due to its significant advantages. With the rapid development of high-viscosity gene therapy drugs, the demand for piezoelectric atomization devices is increasing. However, conventional piezoelectric atomizers with a single-dimensional energy supply are unable to provide the energy required to atomize high-viscosity liquids. To address this problem, our team has designed a flow tube internal cavitation atomizer (FTICA). This study focuses on dissecting the atomization mechanism of FTICA. In contrast to the widely supported capillary wave hypothesis, our study provides evidence in favor of the cavitation hypothesis, proving that cavitation is the key to atomizing high-viscosity liquids with FTICA. In order to prove that the cavitation is the key to atomizing in the structure of FTICA, the performance of atomization is experimented after changing the cavitation conditions by heating and stirring of the liquids.

Aerosolization of poly(sulfobetaine) microparticles that encapsulate therapeutic antibodies

Pulmonary delivery of protein therapeutics poses significant challenges that have not been well addressed in the research literature or practice. In fact, there is currently only one commercial protein therapeutic that is delivered through aerosolization and inhalation. In this study, we propose a drug delivery strategy that enables a high-concentration dosage for the pulmonary delivery of antibodies as an aerosolizable solid powder with desired stability. We utilized zwitterionic polymers for their promising properties as drug delivery vehicles and synthesized swellable, biodegradable poly(sulfo-betaine) (pSB) microparticles. The microparticles were loaded with Immunoglobulin G (IgG) as a model antibody. We quantified the microparticle size and morphology, and the particles were found to have an average diameter of 1.6 μm, falling within the optimal range (~1-5 μm) for pulmonary drug delivery. In addition, we quantified the impact of the crosslinker to monomer ratio on particle morphology and drug loading capacity. The results showed that there is a trade-off between desired morphology and drug loading capacity as the crosslinker density increases. In addition, the particles were aerosolized, and our data indicated that the particles remained intact and retained their initial morphology and size after aerosolization. The combination of morphology, particle size, antibody loading capacity, low cytotoxicity, and ease of aerosolization support the potential use of these particles for pulmonary delivery of protein therapeutics.

Excipients for Novel Inhaled Dosage Forms: An Overview

Pulmonary drug delivery is a form of local targeting to the lungs in patients with respiratory disorders like cystic fibrosis, pulmonary arterial hypertension (PAH), asthma, chronic pulmonary infections, and lung cancer. In addition, noninvasive pulmonary delivery also presents an attractive alternative to systemically administered therapeutics, not only for localized respiratory disorders but also for systemic absorption. Pulmonary delivery offers the advantages of a relatively low dose, low incidence of systemic side effects, and rapid onset of action for some drugs compared to other systemic administration routes. While promising, inhaled delivery of therapeutics is often complex owing to factors encompassing mechanical barriers, chemical barriers, selection of inhalation device, and limited choice of dosage form excipients. There are very few excipients that are approved by the FDA for use in developing inhaled drug products. Depending upon the dosage form, and inhalation devices such as pMDIs, DPIs, and nebulizers, different excipients can be used to provide physical and chemical stability and to deliver the dose efficiently to the lungs. This review article focuses on discussing a variety of excipients that have been used in novel inhaled dosage forms as well as inhalation devices.

Influence of mesh nebulizer characteristics on aerosol delivery in non-human primates

Non-Human Primates (NHPs) are particularly relevant for preclinical studies during the development of inhaled biologics. However, aerosol inhalation in NHPs is difficult to evaluate due to a low lung deposition fraction and high variability. The objective of this study was to evaluate the influence of mesh nebulizer parameters to improve lung deposition in macaques. We developed a humidified heated and ventilated anatomical 3D printed macaque model of the upper respiratory tract to reduce experiments with animals. The model was compared to in vivo deposition using 2D planar scintigraphy imaging in NHPs and demonstrated good predictivity. Next, the anatomical model was used to evaluate the position of the nebulizer on the mask, the aerosol particle size and the aerosol flow rate on the lung deposition. We showed that placing the mesh-nebulizer in the upper part of the mask and in proximal position to the NHP improved lung delivery prediction. The lower the aerosol size and the lower the aerosol flow rate, the better the predicted aerosol deposition. In particular, for 4.3 ± 0.1 µm in terms of volume mean diameter, we obtained 5.6 % ± 0.2 % % vs 19.2 % ± 2.5 % deposition in the lung model for an aerosol flow rate of 0.4 mL/min vs 0.03 mL/min and achieved 16 % of the nebulizer charge deposited in the lungs of macaques. Despite the improvement of lung deposition efficiency in macaques, its variability remained high (6-21 %).

Evaluation of antibody drug delivery efficiency via nebulizer in various airway models and breathing patterns

BACKGROUND

Nebulizers are commonly used to treat respiratory diseases, which are a major cause of morbidity and mortality. While inhalation therapy with antibodies has been evaluated in preclinical studies and clinical trials for respiratory diseases, it has not yet been approved for treatment. Moreover, there is limited information regarding the delivery efficiency of therapeutic antibodies via nebulizer.

METHODS

In this study, the nebulization characteristics and drug delivery efficiencies were compared when immunoglobulin G (IgG) was delivered by five nebulizers using two airway models and five breathing patterns. The study confirmed that the delivered dose and drug delivery efficiency were reduced in the child model compared to those in the adult model and in the asthma pattern compared to those in the normal breathing pattern.

RESULTS

The NE-SM1 NEPLUS vibrating mesh nebulizer demonstrated the highest delivery efficiency when calculated as a percentage of the loading dose, whereas the PARI BOY SX + LC SPRINT (breath-enhanced) jet nebulizer had the highest delivery efficiency when calculated as a percentage of the emitted dose.

CONCLUSION

The results suggest that the total inspiration volume, output rate, and particle size should be considered when IgG nebulization is used. We, therefore, propose a method for evaluating the efficiency of nebulizer for predicting antibody drug delivery.

Nebulization of PEGylated recombinant human deoxyribonuclease I using vibrating membrane nebulizers: A technical feasibility study

Recombinant human deoxyribonuclease I (rhDNase, Pulmozyme®) is the most frequently used mucolytic agent for the symptomatic treatment of cystic fibrosis (CF) lung disease. Conjugation of rhDNase to polyethylene glycol (PEG) has been shown to greatly prolong its residence time in the lungs and improve its therapeutic efficacy in mice. To present an added value over current rhDNase treatment, PEGylated rhDNase needs to be efficiently and less frequently administrated by aerosolization and possibly at higher concentrations than existing rhDNase. In this study, the effects of PEGylation on the thermodynamic stability of rhDNase was investigated using linear 20 kDa, linear 30 kDa and 2-armed 40 kDa PEGs. The suitability of PEG30-rhDNase to electrohydrodynamic atomization (electrospraying) as well as the feasibility of using two vibrating mesh nebulizers, the optimized eFlow® Technology nebulizer (eFlow) and Innospire Go, at varying protein concentrations were investigated. PEGylation was shown to destabilize rhDNase upon chemical-induced denaturation and ethanol exposure. Yet, PEG30-rhDNase was stable enough to withstand aerosolization stresses using the eFlow and Innospire Go nebulizers even at higher concentrations (5 mg of protein per ml) than conventional rhDNase formulation (1 mg/ml). High aerosol output (up to 1.5 ml per min) and excellent aerosol characteristics (up to 83% fine particle fraction) were achieved while preserving protein integrity and enzymatic activity. This work demonstrates the technical feasibility of PEG-rhDNase nebulization with advanced vibrating membrane nebulizers, encouraging further pharmaceutical and clinical developments of a long-acting PEGylated alternative to rhDNase for treating patients with CF.

Barriers for orally inhaled therapeutic antibodies

INTRODUCTION

Respiratory diseases represent a worldwide health issue. The recent Sars-CoV-2 pandemic, the burden of lung cancer, and inflammatory respiratory diseases urged the development of innovative therapeutic solutions. In this context, therapeutic antibodies (Abs) offer a tremendous opportunity to benefit patients with respiratory diseases. Delivering Ab through the airways has been demonstrated to be relevant to improve their therapeutic index. However, few inhaled Abs are on the market.

AREAS COVERED

This review describes the different barriers that may alter the fate of inhaled therapeutic Abs in the lungs at steady state. It addresses both physical and biological barriers and discusses the importance of taking into consideration the pathological changes occurring during respiratory disease, which may reinforce these barriers.

EXPERT OPINION

The pulmonary route remains rare for delivering therapeutic Abs, with few approved inhaled molecules, despite promising evidence. Efforts must focus on the intertwined barriers associated with lung diseases to develop appropriate Ab-formulation-device combo, ensuring optimal Ab deposition in the respiratory tract. Finally, randomized controlled clinical trials should be carried out to establish inhaled Ab therapy as prominent against respiratory diseases.

Strategies for overcoming the biological barriers associated with the administration of inhaled monoclonal antibodies for lung diseases

INTRODUCTION

Monoclonal antibodies (mAbs) should be administered by inhalation rather than parenterally to improve their efficiency in lung diseases. However, the pulmonary administration of mAbs in terms of aerosol technology and the formulation for inhalation is difficult.

AREAS COVERED

The feasible or suitable strategies for overcoming the barriers associated with administering mAbs are described.

EXPERT OPINION

Providing mAbs via inhalation to individuals with lung disorders is still difficult. However, inhalation is a desirable method for mAb delivery. Inhaled mAb production needs to be well thought out. The illness, the patient group(s), the therapeutic molecule selected, its interaction with the biological barriers in the lungs, the formulation, excipients, and administration systems must all be thoroughly investigated. Therefore, to create inhaled mAbs that are stable and efficacious, it will be essential to thoroughly examine the problems linked to instability and protein aggregation. More excipients will also need to be manufactured, expanding the range of formulation design choices. Another crucial requirement is for novel carriers for topical delivery to the lungs since carriers might significantly enhance proteins' stability and pharmacokinetic profile.

Cepharanthine Dry Powder Inhaler for the Treatment of Acute Lung Injury

Severe acute respiratory syndrome Coronavirus 2 (SARS-CoV-2) induces a severe cytokine storm that may cause acute lung injury/acute respiratory distress syndrome (ALI/ARDS) with high clinical morbidity and mortality in infected individuals. Cepharanthine (CEP) is a bisbenzylisoquinoline alkaloid isolated and extracted from Stephania cepharantha Hayata. It exhibits various pharmacological effects, including antioxidant, anti-inflammatory, immunomodulatory, anti-tumor, and antiviral activities. The low oral bioavailability of CEP can be attributed to its poor water solubility. In this study, we utilized the freeze-drying method to prepare dry powder inhalers (DPI) for the treatment of acute lung injury (ALI) in rats via pulmonary administration. According to the powder properties study, the aerodynamic median diameter (D_a) of the DPIs was 3.2 μm, and the in vitro lung deposition rate was 30.26; thus, meeting the Chinese Pharmacopoeia standard for pulmonary inhalation administration. We established an ALI rat model by intratracheal injection of hydrochloric acid (1.2 mL/kg, pH = 1.25). At 1 h after the model's establishment, CEP dry powder inhalers (CEP DPIs) (30 mg/kg) were sprayed into the lungs of rats with ALI via the trachea. Compared with the model group, the treatment group exhibited a reduced pulmonary edema and hemorrhage, and significantly reduced content of inflammatory factors (TNF-α, IL-6 and total protein) in their lungs (p < 0.01), indicating that the main mechanism of CEP underlying the treatment of ALI is anti-inflammation. Overall, the dry powder inhaler can deliver the drug directly to the site of the disease, increasing the intrapulmonary utilization of CEP and improving its efficacy, making it a promising inhalable formulation for the treatment of ALI.

Aerosolization Performance of Immunoglobulin G by Jet and Mesh Nebulizers

Recently, many preclinical and clinical studies have been conducted on the delivery of therapeutic antibodies to the lungs using nebulizers, but standard treatment guidelines have not yet been established. Our objective was to compare nebulization performance according to the low temperature and concentration of immunoglobulin G (IgG) solutions in different types of nebulizers, and to evaluate the stability of IgG aerosols and the amount delivered to the lungs. The output rate of the mesh nebulizers decreased according to the low temperature and high concentration of IgG solution, whereas the jet nebulizer was unaffected by the temperature and concentration of IgG. An impedance change of the piezoelectric vibrating element in the mesh nebulizers was observed because of the lower temperature and higher viscosity of IgG solution. This affected the resonance frequency of the piezoelectric element and lowered the output rate of the mesh nebulizers. Aggregation assays using a fluorescent probe revealed aggregates in IgG aerosols from all nebulizers. The delivered dose of IgG to the lungs in mice was highest at 95 ng/mL in the jet nebulizer with the smallest droplet size. Evaluation of the performance of IgG solution delivered to the lungs by three types of nebulizers could provide valuable parameter information for determination on dose of therapeutic antibody by nebulizers.

A Systematic Review of Clinical Pharmacokinetics of Inhaled Antiviral

Background and Objectives: The study of clinical pharmacokinetics of inhaled antivirals is particularly important as it helps one to understand the therapeutic efficacy of these drugs and how best to use them in the treatment of respiratory viral infections such as influenza and the current COVID-19 pandemic. The article presents a systematic review of the available pharmacokinetic data of inhaled antivirals in humans, which could be beneficial for clinicians in adjusting doses for diseased populations. Materials and Methods: This systematic review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 guidelines. A comprehensive literature search was conducted using multiple databases, and studies were screened by two independent reviewers to assess their eligibility. Data were extracted from the eligible studies and assessed for quality using appropriate tools. Results: This systematic review evaluated the pharmacokinetic parameters of inhaled antiviral drugs. The review analyzed 17 studies, which included Zanamivir, Laninamivir, and Ribavirin with 901 participants, and found that the non-compartmental approach was used in most studies for the pharmacokinetic analysis. The outcomes of most studies were to assess clinical pharmacokinetic parameters such as the Cmax, AUC, and t1/2 of inhaled antivirals. Conclusions: Overall, the studies found that the inhaled antiviral drugs were well tolerated and exhibited favorable pharmacokinetic profiles. The review provides valuable information on the use of these drugs for the treatment of influenza and other viral respiratory infections.

Stability and Activity of Interferon Beta to Treat Idiopathic Pulmonary Fibrosis with Different Nebulizer Technologies

Background: Idiopathic pulmonary fibrosis (IPF) is a serious lung disease characterized by lung scarring, which results in breathing difficulty. Currently, patients with IPF exhibit a poor survival rate and have access to very limited therapeutic options. Interferon beta (IFN-β) has been approved by the U.S. Food and Drug Administration (FDA) for the treatment of relapsing forms of multiple sclerosis, and it has also been shown to exhibit therapeutic potential in IPF. However, clinical use of IFN-β did not lead to improved overall survival in IPF patients in existing studies. One possibility is the limited efficiency of IFN-β delivery through intravenous or subcutaneous injection. Materials and Methods: The aerosol particle size distribution was determined with a laser diffraction particle size analyzer to characterize the droplet size and fine particle fraction generated by three types of nebulizers: jet, ultrasonic, and mesh. A breathing simulator was used to assess the delivery efficiency of IFN-β, and the temperature in the medication reservoirs was monitored with a thermocouple during nebulization. To further evaluate the antifibrotic activity of IFN-β pre- and postnebulization, bleomycin (BLM)- or transforming growth factor-beta (TGF-β)-treated human lung fibroblast (HLF) cells were used. Cell viability was measured by 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay. Transwell migration assay and Q-PCR analysis were used to evaluate cell migration and the myofibroblast differentiation ability, respectively. IFN-β protein samples were prepared using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) sample loading buffer, and the expression of IFN-β was assessed by western blotting. Results: Among the current drug delivery systems, aerosolized medication has shown increased efficacy of drug delivery for treating respiratory diseases when compared with parenteral drugs. It was found that neither the structural integrity nor the biological function of nebulized IFN-β was compromised by the nebulization process of the mesh nebulizer. In addition, in BLM dose-response or TGF-β-induced lung fibroblast proliferation assays, these effects could be reversed by both parenteral and inhaled IFN-β nebulized with the mesh nebulizer. Nebulized IFN-β with the mesh nebulizer also significantly inhibited the migration and myofibroblast differentiation ability of TGF-β-treated HLF cells. Conclusions: The investigations revealed the potential efficacy of IFN-β in the treatment of IPF with the mesh nebulizer, demonstrating the higher efficiency of IFN-β delivered through the mesh nebulizer.

Imaging drug delivery to the lungs: Methods and applications in oncology

Direct delivery to the lung via inhalation is arguably one of the most logical approaches to treat lung cancer using drugs. However, despite significant efforts and investment in this area, this strategy has not progressed in clinical trials. Imaging drug delivery is a powerful tool to understand and develop novel drug delivery strategies. In this review we focus on imaging studies of drug delivery by the inhalation route, to provide a broad overview of the field to date and attempt to better understand the complexities of this route of administration and the significant barriers that it faces, as well as its advantages. We start with a discussion of the specific challenges for drug delivery to the lung via inhalation. We focus on the barriers that have prevented progress of this approach in oncology, as well as the most recent developments in this area. This is followed by a comprehensive overview of the different imaging modalities that are relevant to lung drug delivery, including nuclear imaging, X-ray imaging, magnetic resonance imaging, optical imaging and mass spectrometry imaging. For each of these modalities, examples from the literature where these techniques have been explored are provided. Finally the different applications of these technologies in oncology are discussed, focusing separately on small molecules and nanomedicines. We hope that this comprehensive review will be informative to the field and will guide the future preclinical and clinical development of this promising drug delivery strategy to maximise its therapeutic potential.

Inhaled IgG1 antibodies: The buffering system is an important driver of stability during mesh-nebulization

In the past decade, oral inhalation has been a thriving focus of research to administer antibody directly to the lungs as an aerosol, for local treatment of respiratory diseases. Formulation of inhaled antibodies is central for the stability of antibody, lung safety and to ensure inhaler performances. Surfactants have already been shown to prevent antibody degradation during aerosolization, but little is known about the impact of other components of liquid formulations on the structural stability of antibodies. Here, we report for the first time to the best of our knowledge, a significant effect of the buffering system on monoclonal antibodies stability, during mesh-nebulization. While the monoclonal antibody extensively aggregated in citrate buffer after nebulization and required high concentration of polysorbate 80 (PS80) to maintain protein integrity, acetate and histidine buffers resulted in a slight to moderate aggregation without PS80 and low concentration of PS80 was sufficient to stabilize antibody during mesh-nebulization.

Monoclonal antibody therapies against SARS-CoV-2

Monoclonal antibodies (mAbs) targeting the spike protein of SARS-CoV-2 have been widely used in the ongoing COVID-19 pandemic. In this paper, we review the properties of mAbs and their effect as therapeutics in the pandemic, including structural classification, outcomes in clinical trials that led to the authorisation of mAbs, and baseline and treatment-emergent immune escape. We show how the omicron (B.1.1.529) variant of concern has reset treatment strategies so far, discuss future developments that could lead to improved outcomes, and report the intrinsic limitations of using mAbs as therapeutic agents.

Stable nebulization and muco-trapping properties of regdanvimab/IN-006 support its development as a potent, dose-saving inhaled therapy for COVID-19

The respiratory tract represents the key target for antiviral delivery in early interventions to prevent severe COVID-19. While neutralizing monoclonal antibodies (mAb) possess considerable efficacy, their current reliance on parenteral dosing necessitates very large doses and places a substantial burden on the healthcare system. In contrast, direct inhaled delivery of mAb therapeutics offers the convenience of self-dosing at home, as well as much more efficient mAb delivery to the respiratory tract. Here, building on our previous discovery of Fc-mucin interactions crosslinking viruses to mucins, we showed that regdanvimab, a potent neutralizing mAb already approved for COVID-19 in several countries, can effectively trap SARS-CoV-2 virus-like particles in fresh human airway mucus. IN-006, a reformulation of regdanvimab, was stably nebulized across a wide range of concentrations, with no loss of activity and no formation of aggregates. Finally, nebulized delivery of IN-006 resulted in 100-fold greater mAb levels in the lungs of rats compared to serum, in marked contrast to intravenously dosed mAbs. These results not only support our current efforts to evaluate the safety and efficacy of IN-006 in clinical trials, but more broadly substantiate nebulized delivery of human antiviral mAbs as a new paradigm in treating SARS-CoV-2 and other respiratory pathologies.

Harnessing the Potential of Enzymes as Inhaled Therapeutics in Respiratory Tract Diseases: A Review of the Literature

Respiratory tract diseases (RTDs) are a global cause of mortality and affect patient well-being and quality of life. Specifically, there is a high unmet need concerning respiratory tract infections (RTIs) due to limitations of vaccines and increased antibiotic resistance. Enzyme therapeutics, and in particular plant-based enzymes, represent an underutilised resource in drug development warranting further attention. This literature review aims to summarise the current state of enzyme therapeutics in medical applications, with a focus on their potential to improve outcomes in RTDs, including RTIs. We used a narrative review approach, searching PubMed and clinicaltrials.gov with search terms including: enzyme therapeutics, enzyme therapy, inhaled therapeutics, botanical enzyme therapeutics, plant enzymes, and herbal extracts. Here, we discuss the advantages and challenges of enzyme therapeutics in the setting of RTDs and identify and describe several enzyme therapeutics currently used in the respiratory field. In addition, the review includes recent developments concerning enzyme therapies and plant enzymes in (pre-)clinical stages. The global coronavirus disease 2019 (COVID-19) pandemic has sparked development of several promising new enzyme therapeutics for use in the respiratory setting, and therefore, it is timely to provide a summary of recent developments, particularly as these therapeutics may also prove beneficial in other RTDs.

An Update on Advancements and Challenges in Inhalational Drug Delivery for Pulmonary Arterial Hypertension

A lethal condition at the arterial–alveolar juncture caused the exhaustive remodeling of pulmonary arterioles and persistent vasoconstriction, followed by a cumulative augmentation of resistance at the pulmonary vascular and, consequently, right-heart collapse. The selective dilation of the pulmonary endothelium and remodeled vasculature can be achieved by using targeted drug delivery in PAH. Although 12 therapeutics were approved by the FDA for PAH, because of traditional non-specific targeting, they suffered from inconsistent drug release. Despite available inhalation delivery platforms, drug particle deposition into the microenvironment of the pulmonary vasculature and the consequent efficacy of molecules are influenced by pathophysiological conditions, the characteristics of aerosolized mist, and formulations. Uncertainty exists in peripheral hemodynamics outside the pulmonary vasculature and extra-pulmonary side effects, which may be further exacerbated by underlying disease states. The speedy improvement of arterial pressure is possible via the inhalation route because it has direct access to pulmonary arterioles. Additionally, closed particle deposition and accumulation in diseased tissues benefit the restoration of remolded arterioles by reducing fallacious drug deposition in other organs. This review is designed to decipher the pathological changes that should be taken into account when targeting the underlying pulmonary endothelial vasculature, especially with regard to inhaled particle deposition in the alveolar vasculature and characteristic formulations.

Inhaled antibodies: Quality and performance considerations

The use of antibodies in the treatment of lung diseases is of increasing interest especially as the search for COVID-19 therapies has unfolded. Historically, the use of antibody therapy was based on multiple targets including receptors involved in local hyper-reactivity in asthma, viruses and micro-organisms involved in a variety of pulmonary infectious disease. Generally, protein therapeutics pose challenges with respect to formulation and delivery to retain activity and assure therapy. The specificity of antibodies amplifies the need for attention to molecular integrity not only in formulation but also during aerosol delivery for pulmonary administration. Drug product development can be viewed from considerations of route of administration, dosage form, quality, and performance measures. Nebulizers and dry powder inhalers have been used to deliver protein therapeutics and each has its advantages that should be matched to the needs of the drug and the disease. This review offers insight into quality and performance barriers and the opportunities that arise from meeting them effectively.

Polyclonal hyper immunoglobulin: A proven treatment and prophylaxis platform for passive immunization to address existing and emerging diseases

Passive immunization with polyclonal hyper immunoglobulin (HIG) therapy represents a proven strategy by transferring immunoglobulins to patients to confer immediate protection against a range of pathogens including infectious agents and toxins. Distinct from active immunization, the protection is passive and the immunoglobulins will clear from the system; therefore, administration of an effective dose must be maintained for prophylaxis or treatment until a natural adaptive immune response is mounted or the pathogen/agent is cleared. The current review provides an overview of this technology, key considerations to address different pathogens, and suggested improvements. The review will reflect on key learnings from development of HIGs in the response to public health threats due to Zika, influenza, and severe acute respiratory syndrome coronavirus 2.

Bioanalytical Methods and Strategic Perspectives Addressing the Rising Complexity of Novel Bioconjugates and Delivery Routes for Biotherapeutics

In recent years, an increase in the discovery and development of biotherapeutics employing new modalities, such as bioconjugates or novel routes of delivery, has created bioanalytical challenges. The inherent complexity of conjugated molecular structures means that quantification of the bioconjugate and its multiple components is critical for preclinical/clinical studies to inform drug discovery and development. Moreover, bioconjugates involve additional multifactorial complexity because of the potential for in vivo catabolism and biotransformation, which may require thorough investigations in multiple biological matrices. Furthermore, excipients that enhance absorption are frequently evaluated and employed for the development of oral and inhaled biotherapeutics. Risk-benefit assessments are required for novel or existing excipients that utilize dosages above previously approved levels. Bioanalytical methods that can measure both excipients and potential drug metabolites in biological matrices are highly relevant to these emerging bioanalysis challenges. We discuss the bioanalytical strategies for analyzing bioconjugates such as antibody-drug conjugates and antibody-oligonucleotide conjugates and review recent advances in bioanalytical methods for the quantification and characterization of novel bioconjugates. We also discuss bioanalytical considerations for both biotherapeutics and excipients through novel administration routes and review analyses in various biological matrices, from the extensively studied serum or plasma to tissue biopsy in the context of preclinical and clinical studies from both technical and regulatory perspectives.

Aggregates Associated with Instability of Antibodies during Aerosolization Induce Adverse Immunological Effects

Background: Immunogenicity refers to the inherent ability of a molecule to stimulate an immune response. Aggregates are one of the major risk factors for the undesired immunogenicity of therapeutic antibodies (Ab) and may ultimately result in immune-mediated adverse effects. For Ab delivered by inhalation, it is necessary to consider the interaction between aggregates resulting from the instability of the Ab during aerosolization and the lung mucosa. The aim of this study was to determine the impact of aggregates produced during aerosolization of therapeutic Ab on the immune system. Methods: Human and murine immunoglobulin G (IgG) were aerosolized using a clinically-relevant nebulizer and their immunogenic potency was assessed, both in vitro using a standard human monocyte-derived dendritic cell (MoDC) reporter assay and in vivo in immune cells in the airway compartment, lung parenchyma and spleen of healthy C57BL/6 mice after pulmonary administration. Results: IgG aggregates, produced during nebulization, induced a dose-dependent activation of MoDC characterized by the enhanced production of cytokines and expression of co-stimulatory markers. Interestingly, in vivo administration of high amounts of nebulization-mediated IgG aggregates resulted in a profound and sustained local and systemic depletion of immune cells, which was attributable to cell death. This cytotoxic effect was observed when nebulized IgG was administered locally in the airways as compared to a systemic administration but was mitigated by improving IgG stability during nebulization, through the addition of polysorbates to the formulation. Conclusion: Although inhalation delivery represents an attractive alternative route for delivering Ab to treat respiratory infections, our findings indicate that it is critical to prevent IgG aggregation during the nebulization process to avoid pro-inflammatory and cytotoxic effects. The optimization of Ab formulation can mitigate adverse effects induced by nebulization.

Unbinding of hACE2 and inhibitors from the receptor binding domain of SARS-CoV-2 spike protein

The first direful biomolecular event leading to COVID-19 disease is the SARS-CoV-2 virus surface spike (S) protein-mediated interaction with the human transmembrane protein, angiotensin-converting enzyme 2 (hACE2). Prevention of this interaction presents an attractive alternative to thwart SARS-CoV-2 replications. The development of monoclonal antibodies (mAbs) in the convalescent plasma treatment, nanobody, and designer peptides, which recognizes epitopes that overlap with hACE2 binding sites in the receptor-binding domain (RBD) of S protein (S/RBD) and thereby blocking the infection has been the center stage of therapeutic research. Here we report atomistic and reliable in silico structure-energetic features of the S/RBD interactions with hACE2 and its two inhibitors (convalescent mAb, B38, and an alpaca nanobody, Ty1). The discovered potential of mean forces exhibits free energy basin and barriers along the interaction pathways, providing sufficient molecular insights to design a B38 mutant and a Ty1-based peptide with higher binding capacity. While the mutated B38 forms a 60-fold deeper free energy minimum, the designer peptide (Ty1-based) constitutes 38 amino acids and is found to form a 100-fold deeper free energy minimum in the first binding basin than their wild-type variants in complex with S/RBD. Our strategy may help to design more efficacious biologics towards therapeutic intervention against the current raging pandemic.Communicated by Ramaswamy H. Sarma.

A roadmap to pulmonary delivery strategies for the treatment of infectious lung diseases

Pulmonary drug delivery is a highly attractive topic for the treatment of infectious lung diseases. Drug delivery via the pulmonary route offers unique advantages of no first-pass effect and high bioavailability, which provides an important means to deliver therapeutics directly to lung lesions. Starting from the structural characteristics of the lungs and the biological barriers for achieving efficient delivery, we aim to review literatures in the past decade regarding the pulmonary delivery strategies used to treat infectious lung diseases. Hopefully, this review article offers new insights into the future development of therapeutic strategies against pulmonary infectious diseases from a delivery point of view.

ISM1 protects lung homeostasis via cell-surface GRP78-mediated alveolar macrophage apoptosis

Alveolar macrophages (AMs) are critical for lung immune defense and homeostasis. They are orchestrators of chronic obstructive pulmonary disease (COPD), with their number significantly increased and functions altered in COPD. However, it is unclear how AM number and function are controlled in a healthy lung and if changes in AMs without environmental assault are sufficient to trigger lung inflammation and COPD. We report here that absence of isthmin 1 (ISM1) in mice (Ism1-/- ) leads to increase in both AM number and functional heterogeneity, with enduring lung inflammation, progressive emphysema, and significant lung function decline, phenotypes similar to human COPD. We reveal that ISM1 is a lung resident anti-inflammatory protein that selectively triggers the apoptosis of AMs that harbor high levels of its receptor cell-surface GRP78 (csGRP78). csGRP78 is present at a heterogeneous level in the AMs of a healthy lung, but csGRP78high AMs are expanded in Ism1-/- mice, cigarette smoke (CS)-induced COPD mice, and human COPD lung, making these cells the prime targets of ISM1-mediated apoptosis. We show that csGRP78high AMs mostly express MMP-12, hence proinflammatory. Intratracheal delivery of recombinant ISM1 (rISM1) depleted csGRP78high AMs in both Ism1-/- and CS-induced COPD mice, blocked emphysema development, and preserved lung function. Consistently, ISM1 expression in human lungs positively correlates with AM apoptosis, suggesting similar function of ISM1-csGRP78 in human lungs. Our findings reveal that AM apoptosis regulation is an important physiological mechanism for maintaining lung homeostasis and demonstrate the potential of pulmonary-delivered rISM1 to target csGRP78 as a therapeutic strategy for COPD.

Revisiting Airflow and Aerosol Transport Phenomena in the Deep Lungs with Microfluidics

The dynamics of respiratory airflows and the associated transport mechanisms of inhaled aerosols characteristic of the deep regions of the lungs are of broad interest in assessing both respiratory health risks and inhalation therapy outcomes. In the present review, we present a comprehensive discussion of our current understanding of airflow and aerosol transport phenomena that take place within the unique and complex anatomical environment of the deep lungs, characterized by submillimeter 3D alveolated airspaces and nominally slow resident airflows, known as low-Reynolds-number flows. We exemplify the advances brought forward by experimental efforts, in conjunction with numerical simulations, to revisit past mechanistic theories of respiratory airflow and particle transport in the distal acinar regions. Most significantly, we highlight how microfluidic-based platforms spanning the past decade have accelerated opportunities to deliver anatomically inspired in vitro solutions that capture with sufficient realism and accuracy the leading mechanisms governing both respiratory airflow and aerosol transport at true scale. Despite ongoing challenges and limitations with microfabrication techniques, the efforts witnessed in recent years have provided previously unattainable in vitro quantifications on the local transport properties in the deep pulmonary acinar airways. These may ultimately provide new opportunities to explore improved strategies of inhaled drug delivery to the deep acinar regions by investigating further the mechanistic interactions between airborne particulate carriers and respiratory airflows at the pulmonary microscales.

Central Nervous System Delivery of Antibodies and Their Single-Domain Antibodies and Variable Fragment Derivatives with Focus on Intranasal Nose to Brain Administration

IgG antibodies are some of the most important biopharmaceutical molecules with a high market volume. In spite of the fact that clinical therapies with antibodies are broadly utilized in oncology, immunology and hematology, their delivery strategies and biodistribution need improvement, their limitations being due to their size and poor ability to penetrate into tissues. In view of their small size, there is a rising interest in derivatives, such as single-domain antibodies and single-chain variable fragments, for clinical diagnostic but also therapeutic applications. Smaller antibody formats combine several benefits for clinical applications and can be manufactured at reduced production costs compared with full-length IgGs. Moreover, such formats have a relevant potential for targeted drug delivery that directs drug cargo to a specific tissue or across the blood–brain barrier. In this review, we give an overview of the challenges for antibody drug delivery in general and focus on intranasal delivery to the central nervous system with antibody formats of different sizes.

Innovative Drying Technologies for Biopharmaceuticals

In the past two decades, biopharmaceuticals have been a breakthrough in improving the quality of lives of patients with various cancers, autoimmune, genetic disorders etc. With the growing demand of biopharmaceuticals, the need for reducing manufacturing costs is essential without compromising on the safety, quality, and efficacy of products. Batch Freeze-drying is the primary commercial means of manufacturing solid biopharmaceuticals. However, Freeze-drying is an economically unfriendly means of production with long production cycles, high energy consumption and heavy capital investment, resulting in high overall costs. This review compiles some potential, innovative drying technologies that have not gained popularity for manufacturing parenteral biopharmaceuticals. Some of these technologies such as Spin-freeze-drying, Spray-drying, Lynfinity® Technology etc. offer a paradigm shift towards continuous manufacturing, whereas PRINT® Technology and Microglassification^TM allow controlled dry particle characteristics. Also, some of these drying technologies can be easily scaled-up with reduced requirement for different validation processes. The inclusion of Process Analytical Technology (PAT) and offline characterization techniques in tandem can provide additional information on the Critical Process Parameters (CPPs) and Critical Quality Attributes (CQAs) during biopharmaceutical processing. These processing technologies can be envisaged to increase the manufacturing capacity for biopharmaceutical products at reduced costs.

Computational design of SARS-CoV-2 peptide binders with better predicted binding affinities than human ACE2 receptor

SARS-CoV-2 is coronavirus causing COVID-19 pandemic. To enter human cells, receptor binding domain of S1 subunit of SARS-CoV-2 (SARS-CoV-2-RBD) binds to peptidase domain (PD) of angiotensin-converting enzyme 2 (ACE2) receptor. Employing peptides to inhibit binding between SARS-CoV-2-RBD and ACE2-PD is a therapeutic solution for COVID-19. Previous experimental study found that 23-mer peptide (SBP1) bound to SARS-CoV-2-RBD with lower affinity than ACE2. To increase SBP1 affinity, our previous study used residues 21–45 of α1 helix of ACE2-PD (SPB25) to design peptides with predicted affinity better than SBP1 and SPB25 by increasing interactions of residues that do not form favorable interactions with SARS-CoV-2-RBD. To design SPB25 with better affinity than ACE2, we employed computational protein design to increase interactions of residues reported to form favorable interactions with SARS-CoV-2-RBD and combine newly designed mutations with the best single mutations from our previous study. Molecular dynamics show that predicted binding affinities of three peptides (SPB25_Q22R, SPB25_{F8R/K11W/L25R} and SPB25_{F8R/K11F/Q22R/L25R}) are better than ACE2. Moreover, their predicted stabilities may be slightly higher than SBP1 as suggested by their helicities. This study developed an approach to design SARS-CoV-2 peptide binders with predicted binding affinities better than ACE2. These designed peptides are promising candidates as SARS-CoV-2 inhibitors.

Exploration of synergistic action of cell wall-degrading enzymes against Mycobacterium tuberculosis

Background The major global health threat tuberculosis is caused by Mycobacterium tuberculosis (Mtb). Mtb has a complex cell envelope - a partially covalently linked composite of polysaccharides, peptidoglycan and lipids, including a mycolic acid layer - which conveys pathogenicity but also protects against antibiotics. Given previous successes in treating gram-positive and -negative infections with cell wall degrading enzymes, we investigated such approach for Mtb. Objectives (i) Development of an Mtb microtiter growth inhibition assay that allows undisturbed cell envelope formation, to overcome the invalidation of results by typical clumped Mtb-growth in surfactant-free assays. (ii) Exploring anti-Mtb potency of cell wall layer-degrading enzymes. (iii) Investigation of the concerted action of several such enzymes. Methods We inserted a bacterial luciferase-operon in an auxotrophic Mtb strain to develop a microtiter assay that allows proper evaluation of cell wall degrading anti-Mtb enzymes. We assessed growth-inhibition by enzymes (recombinant mycobacteriophage mycolic acid esterase (LysB), fungal α-amylase and human and chicken egg white lysozymes) and combinations thereof, in presence or absence of biopharmaceutically acceptable surfactant. Results Our biosafety level-2 assay identified both LysB and lysozymes as potent Mtb-inhibitors, but only in presence of surfactant. Moreover, most potent disruption of the mycolic acid hydrophobic barrier was obtained by the highly synergistic combination of LysB, α-amylase and polysorbate 80. Conclusions Synergistically acting cell wall degrading enzymes are potently inhibiting Mtb - which sets the scene for the design of specifically tailored antimycobacterial (fusion) enzymes. Airway delivery of protein therapeutics has already been established and should be studied in animal models for active TB.

Augmentation therapy with alpha 1-antitrypsin: present and future of production, formulation, and delivery

Alpha 1-antitrypsin is one of the first protein therapeutics introduced on the market - more than 30 years ago - and, to date, it is indicated only for the treatment of the severe forms of a genetic condition known as alpha-1 antitrypsin deficiency. The only approved preparations are derived from plasma, posing potential problems associated with its limited supply and high processing costs. Moreover, augmentation therapy with alpha 1-antitrypsin is still limited to intravenous infusions, a cumbersome regimen for patients. Here, we review the recent literature on its possible future developments, focusing on i) the recombinant alternatives to the plasma-derived protein, ii) novel formulations, and iii) novel administration routes. Regulatory issues and the still unclear noncanonical functions of alpha 1-antitrypsin - possibly associated with the glycosylation pattern found only in the plasma-derived protein - have hindered the introduction of new products. However, potentially new therapeutic indications other than the treatment of alpha-1 antitrypsin deficiency might open the way to new sources and new formulations.

Increased resistance to fibrinolysis activation in patients with coronavirus disease 2019: a case series

We describe seven critically ill and seven noncritically ill patients with coronavirus disease 2019 infection. Two viscoelastic assays were performed with ClotPro technology, activated by extrinsic system test and recombinant tissue plasminogen activator challenge test. Coagulation profile presents a marked hypercoagulability with increased resistance to fibrinolysis, reflected by tissue plasminogen activator test. Our pathological observations show that the hypercoagulative status described in these patients is, at least partially, secondary to fibrinolysis shutdown.

Novel formulations and drug delivery systems to administer biological solids

Recent advances in formulation sciences have expanded the previously limited design space for biological modalities, including peptide, protein, and vaccine products. At the same time, the discovery and application of new modalities, such as cellular therapies and gene therapies, have presented formidable challenges to formulation scientists. We explore these challenges and highlight the opportunities to overcome them through the development of novel formulations and drug delivery systems as biological solids. We review the current progress in both industry and academic laboratories, and we provide expert perspectives in those settings. Formulation scientists have made a tremendous effort to accommodate the needs of these novel delivery routes. These include stability-preserving formulations and dehydration processes as well as dosing regimes and dosage forms that improve patient compliance.

Oral inhalation for delivery of proteins and peptides to the lungs

Oral inhalation is the preferred route for delivery of small molecules to the lungs, because high tissue levels can be achieved shortly after application. Biologics are mainly administered by intravenous injection but inhalation might be beneficial for the treatment of lung diseases (e.g. asthma). This review discusses biological and pharmaceutical challenges for delivery of biologics and describes promising candidates. Insufficient stability of the proteins during aerosolization and the biological environment of the lung are the main obstacles for pulmonary delivery of biologics. Novel nebulizers will improve delivery by inducing less shear stress and administration as dry powder appears suitable for delivery of biologics. Other promising strategies include pegylation and development of antibody fragments, while carrier-encapsulated systems currently play no major role in pulmonary delivery of biologics for lung disease. While development of various biologics has been halted or has shown little effects, AIR DNase, alpha1-proteinase inhibitor, recombinant neuraminidase, and heparin are currently being evaluated in phase III trials. Several biologics are being tested for the treatment of coronavirus disease (COVID)-19, and it is expected that these trials will lead to improvements in pulmonary delivery of biologics.

Inhaled antibiotics during mechanical ventilation-why it will work

Inhaled antibiotics are a common therapy among patients suffering recurrent or chronic pulmonary infections. Their use is less frequent in acutely ill patients despite a strong theoretical rationale and growing evidence of their efficiency, safety and beneficial effect on reducing bacterial resistance emergence. Clinical trials of inhaled antibiotics have shown contradictory results among mechanically ventilated patients. The optimal nebulization setup, not always implemented in all trials, the difficulty to identify the population most likely to benefit and the testing of various therapeutic strategies such as adjunctive versus alternative to systemic antibiotics may explain the disparity in trial results. The present review first presents the reasons why inhaled antibiotics have to be developed and the benefits to be expected of inhaled anti-infectious therapy among mechanically ventilated patients. A second part develops the constraints of aerosolized therapies that one has to be aware of and the simple actions required during nebulization to ensure optimal delivery to the distal lung parenchyma. Positive and negative studies concerning inhaled antibiotics are compared to understand the discrepancies of their findings and conclusions. The last part presents current developments and perspective which will likely turn it into a fully successful therapeutic modality, and makes the link between inhaled antibiotics and inhaled anti-infectious therapy.

Inhaled antibodies: formulations require specific development to overcome instability due to nebulization

Abstract

Respiratory infections are life-threatening and therapeutic antibodies (Ab) have a tremendous opportunity to benefit to patients with pneumonia due to multidrug resistance bacteria or emergent virus, before a vaccine is manufactured. In respiratory infections, inhalation of anti-infectious Ab may be more relevant than intravenous (IV) injection-the standard route-to target the site of infection and improve Ab therapeutic index. One major challenge associated to Ab inhalation is to prevent protein instability during the aerosolization process. Ab drug development for IV injection aims to design a high-quality product, stable to different environment stress. In this study, we evaluated the suitability of Ab formulations developed for IV injection to be extended for inhalation delivery. We studied the aerosol characteristics and the aggregation profile of three Ab formulations developed for IV injection after nebulization, with two mesh nebulizers. Although the formulations for IV injection were compatible with mesh nebulization and deposition into the respiratory tract, the Ab were more unstable during nebulization than exposition to a vigorous shaking. Overall, our findings indicate that Ab formulations developed for IV delivery may not easily be repurposed for inhalation delivery and point to the requirement of a specific formulation development for inhaled Ab.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s13346-021-00967-w.

Review of the Mechanism of Nanocarriers and Technological Developments in the Field of Nanoparticles for Applications in Cancer Theragnostics

Cancer cannot be controlled by the usage of drugs alone, and thus, nanotechnology is an important technique that can provide the drug with an impetus to act more effectively. There is adequate availability of anticancer drugs that are classified as alkylating agents, hormones, or antimetabolites. Nanoparticle (NP) carriers increase the residence time of the drug, thereby enhancing the survival rate of the drug, which otherwise gets washed off owing to the small size of the drug particles by the excretory system. For example, for enhancing the circulation, a coating of nonfouling polymers like PEG and dextran is done. Famous drugs such as doxorubicin (DOX) are commonly encapsulated inside the nanocomposite. The various classes of nanoparticles are used to enhance drug delivery by aiding it to fight against the tumor. Targeted therapy aims to attack the cells with features common to the cancer cells while minimizing damage to the normal cell, and these therapies work in one in four ways. Some block the cancer cells from reproducing newer cells, others release toxic substances to kill the cancer cells, some stimulate the immune system to destroy the cancer cells, and some block the growth of more blood vessels around cancer cells, which starve the cells of the nutrients, which is needed for their growth. This review aims to testify the advancements nanotechnology has brought in cancer therapy, and its statements are supported with recent research findings and clinical trial results.

Therapeutic activity of an inhaled potent SARS-CoV-2 neutralizing human monoclonal antibody in hamsters

SARS-CoV-2 infection results in viral burden in the respiratory tract, enabling transmission and leading to substantial lung pathology. The 1212C2 fully human monoclonal antibody was derived from an IgM memory B cell of a COVID-19 patient, has high affinity for the Spike protein receptor binding domain, neutralizes SARS-CoV-2, and exhibits in vivo prophylactic and therapeutic activity in hamsters when delivered intraperitoneally, reducing upper and lower respiratory viral burden and lung pathology. Inhalation of nebulized 1212C2 at levels as low as 0.6 mg/kg, corresponding to 0.03 mg/kg lung-deposited dose, reduced the viral burden below the detection limit and mitigated lung pathology. The therapeutic efficacy of an exceedingly low dose of inhaled 1212C2 supports the rationale for local lung delivery for dose-sparing benefits, as compared to the conventional parenteral route of administration. These results suggest that the clinical development of 1212C2 formulated and delivered via inhalation for the treatment of SARS-CoV-2 infection should be considered.

The 1212C2 human monoclonal antibody potently neutralizes SARS-CoV-2

1212C2 mAb was isolated from an IgM memory B cell of a recovered COVID-19 patient

Inhaled 1212C2 mAb is rapidly distributed in the lungs

Inhaled 1212C2 mAb treatment reduces viral burden and lung pathology in hamsters

Thrombosis and Haemostasis challenges in COVID-19 - Therapeutic perspectives of heparin and tissue-type plasminogen activator and potential toxicological reactions-a mini review

The coronavirus disease (COVID)-19 pandemic is a major challenge for the health systems worldwide. Acute respiratory distress syndrome (ARDS), is one of the most common complications of the COVID-19 infection. The activation of the coagulation system plays an important role in the pathogenesis of ARDS. The development of lung coagulopathy involves thrombin generation and fibrinolysis inhibition. Unfractionated heparin and its recently introduced counterpart low molecular weight heparin (LMWH), are widely used anticoagulants with a variety of clinical indications allowing for limited and manageable physio-toxicologic side effects while the use of protamine sulfate, heparin's effective antidote, has made their use even safer. Tissue-type plasminogen activator (tPA) is approved as intravenous thrombolytic treatment. The present narrative review discusses the use of heparin and tPA in the treatment of COVID-19-induced ARDS and their related potential physio-toxicologic side effects. The article is a quick review of articles on anticoagulation in COVID infection and the potential toxicologic reactions associated with these drugs.