A new method for rapid determination of carbohydrate and total carbon concentrations using UV spectrophotometry

Methane utilization in Methylomicrobium alcaliphilum 20ZR: a systems approach

Biological methane utilization, one of the main sinks of the greenhouse gas in nature, represents an attractive platform for production of fuels and value-added chemicals. Despite the progress made in our understanding of the individual parts of methane utilization, our knowledge of how the whole-cell metabolic network is organized and coordinated is limited. Attractive growth and methane-conversion rates, a complete and expert-annotated genome sequence, as well as large enzymatic, ¹³C-labeling, and transcriptomic datasets make Methylomicrobium alcaliphilum 20Z^R an exceptional model system for investigating methane utilization networks. Here we present a comprehensive metabolic framework of methane and methanol utilization in M. alcaliphilum 20Z^R. A set of novel metabolic reactions governing carbon distribution across central pathways in methanotrophic bacteria was predicted by in-silico simulations and confirmed by global non-targeted metabolomics and enzymatic evidences. Our data highlight the importance of substitution of ATP-linked steps with PPi-dependent reactions and support the presence of a carbon shunt from acetyl-CoA to the pentose-phosphate pathway and highly branched TCA cycle. The diverged TCA reactions promote balance between anabolic reactions and redox demands. The computational framework of C₁-metabolism in methanotrophic bacteria can represent an efficient tool for metabolic engineering or ecosystem modeling.

Lipid accumulation potential of oleaginous yeasts: A comparative evaluation using food waste leachate as a substrate

In present study, the efficiency of three oleaginous yeasts i.e., Yarrowia lipolytica, Rhodotorula glutinis and Cryptococcus curvatus were compared for their lipid assimilation capacities using three different FW-leachates as a medium. The FW-leachates were collected from dry anaerobic digesters and diluted to achieve carbohydrate content of 25gL^-1 prior to yeast inoculations. Around 5% of yeast cultures were individually mixed in three different FW-leachate mediums and incubated under 30°C and 150rpm agitation for 6days. The Y. lipolytica produced high biomass with lipid contents of 49.0±2% on dry weight basis. Whereas, the acetic acid concentration of >6gL^-1 inhibited the growth of R. glutinis. The study observed that the selection of appropriate FW-leachate composition is highly important for biolipid accumulation by oleaginous yeasts.

Evaluating analytical methods for the characterization of lipids, proteins and carbohydrates in organic substrates for anaerobic co-digestion

This study provides insights into the characterization of lipids, proteins and carbohydrate content in substrates for codigestion, and evaluates their effects on biogas yield. Among the analytical methods evaluated, the Bligh and Dyer, Hach Total Nitrogen and the Anthrone method were found to be most suitable for lipids, proteins and carbohydrates analysis, respectively. The co-digestibility of ten co-substrate mixes prepared using various volume-to-volume ratios of foodwaste (FW), fats, oils and grease (FOG), and waste activated sludge (WAS) were tested using biomethane potential assays. The three main substrates were mono-digested as well. WAS mono-digestion yielded the lowest methane yield of 118mL CH₄/g VS, while a 50:50 mix of WAS and FOG, containing 85% lipid and 15% protein produced the highest methane yield of 1040mL CH₄/g VS. In general, lipid-rich samples yielded more biogas than samples rich in proteins and carbohydrates. However, samples rich in proteins and carbohydrates had faster biogas production rates.

Cubic liquid crystalline nanoparticles containing a polysaccharide from Ulva fasciata with potent antihyperlipidaemic activity

The present study involves the preparation of cubic liquid crystalline nanoparticles (cubsomes) for liver targeting to assess the potential of a formulated bioactive polysaccharide isolated from the hot aqueous extract of Ulva fasciata as an alternative natural agent with anti-hyperlipidaemic activity. Cubosomal nanoparticles were prepared by disrupting the cubic gel phase of the polysaccharide and water in the presence of a surfactant. Different lipid matrices and stabilizers were tested. All the formulations were in the nanosize range and showed sufficient negative charge to inhibit the aggregation of the cubosomes. Drug entrapment efficiencies (EEs%) were determined and in vitro release studies were performed. Transmission electron microscopy (TEM) and differential scanning calorimetry were used to analyze the loaded cubosomal nanoparticles containing glyceryl monostearate (GMO 2.25 g), poloxamer 407 (0.25 g) and 50 mg of the polysaccharide. A preclinical study comparing the cubic liquid crystalline nanoparticles containing polysaccharide to fluvastatin as a reference drug in hyperlipidaemic rats was conducted. The rats treated with the polysaccharide- loaded cubosomes showed significant decreases in total cholesterol (TC), triglycerides (TG) and total lipid (TL) compared to the untreated HL rats. In addition, oxidative stress and antioxidant biomarkers were measured in the HL rats. Compared to the untreated HL rats, the cubosome treated rats showed a significant reduction in malondialdehyde (MDA), whereas insignificant changes were detected in nitric oxide (NO), glutathione (GSH) levels and total antioxidant capacity (TAC). Further, vascular and intercellular adhesion molecules (VCAM, ICAM), and myeloperoxidase were demonstrated. A histopathological examination was conducted to study the alterations in histopathological lesions and to document the biochemical results. In conclusion, this study demonstrates the superiority of using a natural lipid regulator such as polysaccharide loaded cubosomes instead of fluvastatin.

Starch digestibility and glycemic index of Paranthas supplemented with Citrus maxima (Burm.) Merr. fruit segments

The present investigation was undertaken to develop paranthas suiting diabetic population with added health benefits. Paranthas were prepared using fresh and dry segments of pomelo. The increase in the concentration of segments decreased the texture value from 1080 to 1022 g force (fresh segments) and 1005 to 870 g force (dry segments). Naringin along with other bioactive compounds were retained to a greater extent in Paranthas containing dry pomelo fruit segments. Paranthas prepared using 20% (fresh) and 5% (dry) were sensorily acceptable. The pomelo incorporated paranthas had higher levels of resistance starch fractions (12.94%) with low predicted glycemic index (49.89%) compared to control Paranthas at 5.54 and 58.64% respectively. The fortified paranthas with an considerable content of bioactive compounds and low glycemic index indicate the possibility of using it as a dietary supplement. Thus utilization of pomelo fortification helps in improving the nutritional and functional property of paranthas suiting diabetes as well as general population.

Enhancement of anaerobic digestibility of waste activated sludge using photo-Fenton pretreatment

Biological treatments, such as activated sludge process, are common methods to treat municipal and industrial wastewaters. However, they produce huge amounts of waste activated sludge (WAS). The excess sludge treatment and disposal are a challenge for wastewater treatment plants due to economic, environmental, and regulatory factors. In this study, photo-Fenton pretreatment (oxidation using hydrogen peroxide and iron catalyst aided with UV light) was optimized using response surface methodology (RSM) and central composite design (CCD) to determine the effects of three operating parameters (H₂O₂ dosage, H₂O₂/Fe²⁺ molar ratio, and irradiation time) on disintegration and dewaterability of WAS. MLVSS removal, capillary suction time (CST) reduction, sCOD, and EPS were obtained as 70%, 25%, 12,000 mg/L, and 500 mg/L, respectively, at the optimal conditions, i.e., 725 g H₂O₂/kg TS, H₂O₂/Fe²⁺ molar ratio 80, and irradiation time 40 min. Two batch-fed completely mixed mesophilic anaerobic digesters were then operated at 15-day solid retention time (SRT) and 37 ± 0.5 °C to compare the digestibility of untreated and photo-Fenton pretreated sludge in terms of volatile solids (VS) reduction, COD removal, and biogas production at steady-state operations. Photo-Fenton pretreatment followed by anaerobic digestion of WAS was very effective and yielded 75.7% total VS reduction, 81.5% COD removal, and 0.29-0.31 m³/kg VS_fed·d biogas production rate, compared to 40.7% total VS solid reduction, 54.7% COD removal, and 0.12-0.17 m³/kg VS_fed·d biogas production rate for control. Thus, photo-Fenton can be a useful pretreatment step in sludge management.

Optimization of Bioactive Polyphenols Extraction from Picea Mariana Bark

Reported for its antioxidant, anti-inflammatory and non-toxicity properties, the hot water extract of Picea mariana bark was demonstrated to contain highly valuable bioactive polyphenols. In order to improve the recovery of these molecules, an optimization of the extraction was performed using water. Several extraction parameters were tested and extracts obtained analyzed both in terms of relative amounts of different phytochemical families and of individual molecules concentrations. As a result, low temperature (80 °C) and low ratio of bark/water (50 mg/mL) were determined to be the best parameters for an efficient polyphenol extraction and that especially for low molecular mass polyphenols. These were identified as stilbene monomers and derivatives, mainly stilbene glucoside isorhapontin (up to 12.0% of the dry extract), astringin (up to 4.6%), resveratrol (up to 0.3%), isorhapontigenin (up to 3.7%) and resveratrol glucoside piceid (up to 3.1%) which is here reported for the first time for Picea mariana. New stilbene derivatives, piceasides O and P were also characterized herein as new isorhapontin dimers. This study provides novel information about the optimal extraction of polyphenols from black spruce bark, especially for highly bioactive stilbenes including the trans-resveratrol.

Exploiting bilosomes for delivering bioactive polysaccharide isolated from Enteromorpha intestinalis for hacking hepatocellular carcinoma

Bile salts containing vesicles (bilosomes) represent a portentous vesicular carrier that showed prosperous results in delivering active moieties in the gastrointestinal tract (GIT). In this study, bilosomes were exploited to deliver sulfated polysaccharide-protein complexes of Enteromorpha intestinalis (EHEM) and enhance its activity against hepatocellular carcinoma as well as resist harsh GIT conditions. Bilosomes were prepared using the sodium salt of three different bile acids (cholic, deoxycholic, taurodeoxycholic) and two different nonionic surfactants (Span 40 and 65). The effects of experimental variables were thoroughly studied to obtain an optimum formulation loading EHEM. The selected formulation (EH-Bilo-2) prepared with sodium cholate and Span 65 displayed nano-sized (181.1 ± 16.80 nm) spherical vesicles with reasonable entrapment efficiency (71.60 ± 0.25%) and controlled release properties; and thus was investigated as anti-hepatocarcinogenic candidate for in vivo studies. Treatment of hepatocellular carcinoma (HCC) bearing rats with EH-Bilo-2 experienced significant decrease in serum α-fetoprotein, endoglin, lipocalin-2, and heat shock protein 70 levels vs. the untreated counterparts. Furthermore, the photomicrographs of their liver tissue sections showed focal area of degenerated pleomorphic hepatocytes with fine fibrosis originating from the portal area. Thus, the optimized bilosomal formulation is a promising delegate for tackling hepatocellular carcinoma owing to its powerful anti-cancer and anti-angiogenic activity.

Assessment of Methylobacterium oryzae CBMB20 aggregates for salt tolerance and plant growth promoting characteristics for bio-inoculant development

Salinity is one of the major factors contributing to the loss of crop productivity and thereby impacting livelihood of people in more than 100 countries of the world and the area of land affected by salinity is increasing day by day. This will worsen due to various factors such as drought that might result in high soil salinity. Use of plant growth promoting rhizobacteria is one of the promising eco-friendly strategies for salinity stress management as part of sustainable agricultural practices. However, it requires selecting rhizobacteria with good survivability and adaptation to salt stress. In this study we report aggregation of Methylobacterium oryzae CBMB20 cells grown in media containing high C/N ratio (30:1) than in media containing low C/N ratio (7:1). Aggregated Methylobacterium oryzae CBMB20 cells exhibited enhanced tolerance to UV irradiation, heat, desiccation, different temperature regimes, oxidative stress, starvation and supported higher population in media. Poly-β-hydroxybutyrate accumulation, exopolysaccharide production, proline accumulation and biofilm formation were good at 100 mM salt concentration with good microbial cell hydrophobicity at both 50 and 100 mM than other concentrations. Both the aggregated and non-aggregated cells grown under 0-200 mM salt concentrations produced IAA even at 200 mM salt concentration with a peak at 100 mM concentration with aggregated cells producing significantly higher quantities. ACC deaminase activity was observed in all NaCl concentrations studied with gradual and drastic reduction in aggregated and non-aggregated cells over increased salt concentrations.

Isolation and Characterization of Cellulose from Different Fruit and Vegetable Pomaces

A new fractionation process was developed to achieve valorization of fruit and vegetable pomaces. The importance of the residues from fruits and vegetables is still growing; therefore; the study presents the novel route of a fractioning process for the conversion of agro-industrial biomasses, such as pomaces, into useful feedstocks with potential application in the fields of fuels, chemicals, and polymers. Hence, the biorefinery process is expected to convert them into various by-products offering a great diversity of low-cost materials. The final product of the process is the cellulose of the biofuel importance. The study presents the novel route of the fractioning process for the conversion of agro-industrial biomasses, such as pomaces, into useful feedstocks with a potential application in the fields of fuels, chemicals, and polymers. Therefore the aim of this paper was to present the novel route of the pomaces fraction and the characterization of residuals. Pomaces from apple, cucumber, carrot, and tomato were treated sequentially with water, acidic solution, alkali solution, and oxidative reagent in order to obtain fractions reach in sugars, pectic polysaccharides, hemicellulose, cellulose, and lignin. Pomaces were characterized by dry matter content, neutral detergent solubles, hemicellulose, cellulose, and lignin. Obtained fractions were characterized by the content of pectins expressed as galacturonic acid equivalent and hemicelluloses expressed as a xyloglucan equivalent. The last fraction and residue was cellulose characterized by crystallinity degree by X-ray diffractometer (XRD), microfibril diameter by atomic force microscope (AFM), and overall morphology by scanning electron microscope (SEM). The hemicelluloses content was similar in all pomaces. Moreover, all the materials were characterized by the high pectins level in extracts evaluated as galacturonic acid content. The lignins content compared with other plant biomasses was on a very low level. The cellulose fraction was the highest in cucumber pomace. The cellulose fraction was characterized by crystallinity degree, microfibril diameter, and overall morphology. Isolated cellulose had a very fine structure with relatively high crystalline index but small crystallites.

Changing of biochemical parameters and cell wall polysaccharides distribution during physiological development of tomato fruit

This study was aimed at discovering an impact of biochemical parameters (like content of cell wall polysaccharides, phenolic compounds, ascorbic acid or activity of pectinolytic enzymes) on cell wall microstructure during physiological fruit development. Cell wall microstructure as well as changes in the polysaccharides distribution were examined by confocal Raman microscopy. Also there was a need to simultaneous usage of reference method which is immunolabeling. A tomato fruit (Solanum lycopersicum cv Cerise) has been selected to observe the changes taking place in the fruit cell wall as it recently has been recognized as a model species for exploring fruit development processes such as fruit formation and ripening. Our studies showed that chemical images allows to depict changes in spatial distribution of polysaccharides in plant cell wall (including the middle lamella area), thus this technique allows to observation of cell wall degradation during tomato ripening (mainly pectic polysaccharides degradation). It seems that high level of pectinolytic enzymes activity and increasing content of ascorbate and hence decrease of pectins content have a significant impact on spatial distribution of biopolymers in fruit cell wall.

Impact of phenolic compounds in the acyl homoserine lactone-mediated quorum sensing regulatory pathways

Quorum sensing (QS) is a cell density-dependent regulation of virulent bacterial gene expression by autoinducers that potentially pertains in the epidemic of bacterial virulence. This study was initially designed to evaluate the effect of 5 phenolic compounds in the modulation of QS and virulence factors of Chromobacterium violaceum and Pseudomonas aeruginosa, and to determine the mechanisms of their effects. Biosensor strains were used to assess antibacterial and anti-QS effect of these compounds. Only methyl gallate (MG) among these compounds demonstrated profound anti-QS effect in the preliminary study, and thus only MG was utilized further to evaluate the effects on the synthesis and activity of acyl homoserine lactone (AHL) in C. violaceum and on the modulation of biofilm, motility, proteolytic, elastase, pyocyanin, and rhamnolipid activity in P. aeruginosa. Finally, the effect of MG on the expression of QS-regulated genes of P. aeruginosa was verified. MG suppressed both the synthesis and activity of AHL in C. violaceum. It also restricted the biofilm formation and other QS-associated virulence factor of P. aeruginosa. MG concentration-dependently suppressed the expression of lasI/R, rhlI/R, and pqsA of P. aeruginosa and was non-toxic in in vitro study. This is the first report of the anti-QS mechanism of MG.

Electrochemically Driven Fermentation of Organic Substrates with Undefined Mixed Microbial Cultures

Growing scientific interest in mixed microbial culture-based anaerobic biotechnologies for the production of value-added chemicals and fuels from organic waste residues requires a parallel focus on the development and implementation of strategies to control the distribution of products. This study examined the feasibility of an electrofermentation approach, based on the introduction of a polarized (-700 mV vs. the standard hydrogen electrode) graphite electrode in the fermentation medium, to steer the product distribution during the conversion of organic substrates (glucose, ethanol, and acetate supplied as single compounds or in mixtures) by undefined mixed microbial cultures. In batch experiments, the polarized electrode triggered a nearly 20-fold increase (relative to open circuit controls) in the yield of isobutyrate production (0.43±0.01 vs. 0.02±0.02 mol mol^-1 glucose) during the anaerobic fermentation of the ternary mixture of substrates, without adversely affecting the rate of substrate bioconversion. The observed change in the fermentative metabolism was most likely triggered by the (potentiostatic) regulation of the oxidation-reduction potential of the reaction medium rather than by the electrode serving as an electron donor.

Procoagulant serine glycoprotease from Cucumis sativus L.: action on human fibrinogen and fibrin clot

Upon examination of the fruit extract of Cucumis sativus L. for its pharmacological benefits, it was previously observed that it has potential proteolytic, fibrinogenolytic and procoagulant activities. These properties can be attributed to the presence of the protease. In this regard, the present study comprised of purification and characterization of protease. Purification of the enzyme involved ammonium sulfate precipitation followed by gel filtration and ion exchange chromatography. The purified cucumis protease (CPro) exhibits homogeneity as attested by SDS-PAGE and RP-HPLC with a retention time of 14.246 min with molecular mass ~75.3 kDa. CPro was identified as a glycoprotein and serine protease. Azocasein is the preferred substrate for CPro as it showed low K_m value of 0.3809 mg/ml. Purified CPro exhibits optimum activity at 37 °C and pH 8. CPro shows its involvement in hemostasis-the very first step in wound healing. CPro degrades the subunits of human fibrinogen in the order Aα > Bβ > γ. It also hydrolyzes the subunits of the partially cross-linked fibrin clot in the order α-polymer > γ-γ dimer > β-chain. CPro reduced the clotting time of citrated plasma, prothrombin time and activated partial thromboplastin time of plasma. CPro is neither hemorrhagic nor edema-inducing, thus considered to be a non-toxic protease. This work provides evidence for the use of cucumber extract in wound healing and authenticates its use in cosmetics.

Effect of cooking and preservation on nutritional and phytochemical composition of the mushroom Amanita zambiana

The effect of different cooking and preservation methods on the nutritional and phytochemical composition of the mushroom, Amanita zambiana, was investigated. Fresh mushrooms were boiled in water, fried, or microwaved. In addition, fresh mushrooms were either air-dried for 7 days or frozen at -20°C for 14 days. The protein, lipid, carbohydrate, and phenolic content of the treated mushrooms were measured and compared to the fresh mushroom contents. Frying increased the protein (2.01% ± 0.2% [fresh mushroom] to 2.23% ± 0.09%), lipid (14.68% ± 0.9% to 15.56% ± 0.34%), and carbohydrate (0.89% ± 0.01% to 2.69% ± 0.03%) content, while microwaving increased the protein (2.01% ± 0.2% to 3.64% ± 0.08%) and carbohydrate content (0.89% ± 0.01% to 2.26% ± 0.09%). Boiling only increased the carbohydrate content (0.89% ± 0.01% to 1.71% ± 0.05%) of the mushroom and significantly decreased (p < .05) the phenolic content (8.77 ± 0.1 to 1.46 ± 0.2 mg gallic acid equivalent (GAE)/g mushroom). Drying resulted in significant increase (p < .05) in protein (2.01 ± 0.2% to 24.36 ± 0.09%), carbohydrate (0.89% ± 0.01% to 58.67% ± 3.29%), and phenolic contents (8.77 ± 0.1 to 119.8 ± 0.7 mg GAE/g mushroom), while freezing only increased the carbohydrate content (0.89% ± 0.01% to 1.77% ± 0.03%). From the three cooking methods studied, frying is recommended as the most effective cooking procedure in retaining or enhancing the mushroom nutrients, while drying is a better preservation method than freezing.

Optimization of alginate alkaline extraction technology from Sargassum latifolium and its potential antioxidant and emulsifying properties

Alginate was recovered from Sargassum latifolium biomass using different conditions of alkali treatment. Box-Behnken experimental design was evaluated to study the influence of alkali:alga ratio, temperature and time on alginate yield, and its molecular weight (MW) and mannuronic/guluronic acid ratio (M/G). The second-order polynomial equations were analyzed by appropriate statistical methods. Extraction temperature and time were the most important factors during alginate alkaline extraction. MW and M/G ratio played an important role in controlling the reducing power of alginate. Increasing pH of the alginate solutions enhanced its reducing capacity, while thermal treatment showed a negative effect. Additionally, alginate exhibited good emulsion stabilizing capacities with diverse hydrophobic compounds. Emulsifying activity was less sensitive to temperature, ionic strength and more stable at acidic pH.

Additive effects due to biochar and endophyte application enable soybean to enhance nutrient uptake and modulate nutritional parameters

We studied the effects of hardwood-derived biochar (BC) and the phytohormone-producing endophyte Galactomyces geotrichum WLL1 in soybean (Glycine max (L.) Merr.) with respect to basic, macro- and micronutrient uptakes and assimilations, and their subsequent effects on the regulation of functional amino acids, isoflavones, fatty acid composition, total sugar contents, total phenolic contents, and 1,1-diphenyl-2-picrylhydrazyl (DPPH)-scavenging activity. The assimilation of basic nutrients such as nitrogen was up-regulated, leaving carbon, oxygen, and hydrogen unaffected in BC+G. geotrichum-treated soybean plants. In comparison, the uptakes of macro- and micronutrients fluctuated in the individual or co-application of BC and G. geotrichum in soybean plant organs and rhizospheric substrate. Moreover, the same attribute was recorded for the regulation of functional amino acids, isoflavones, fatty acid composition, total sugar contents, total phenolic contents, and DPPH-scavenging activity. Collectively, these results showed that BC+G. geotrichum-treated soybean yielded better results than did the plants treated with individual applications. It was concluded that BC is an additional nutriment source and that the G. geotrichum acts as a plant biostimulating source and the effects of both are additive towards plant growth promotion. Strategies involving the incorporation of BC and endophytic symbiosis may help achieve eco-friendly agricultural production, thus reducing the excessive use of chemical agents.

Screening Quality Evaluation Factors of Freeze-Dried Peach (Prunus PersicaL. Batsch) Powders from Different Ripening Time Cultivars

The quality evaluation of processed products is complex. To simplify the quality evaluation process and improve the efficiency, fourteen evaluation factors of freeze-dried powders of seventeen cultivars of peach at different ripening times were analyzed. The most important evaluation indicators and criteria were obtained by analysis of variance (ANOVA), correlation analysis (CA), principal component analysis (PCA), system cluster analysis (SCA), and analytic hierarchy process (AHP). Results showed that the peach powders had the significant differences in quality (P<0.05), and some processing factors were related with some physicochemical and nutritional factors. Five principle components were extracted by PCA and the cumulative contribution achieved was 84.46%. Through the score plot of the first two principal components, a clear differentiation among ripening times was found and three distinct groups were separated according to ripening time. Five characteristic factors were obtained as titratable acid, browning index, hemicellulose, hygroscopicity, and vitamin C by SCA. Their weights of 0.1249, 0.3007, 0.0514, 0.4916, and 0.0315 were obtained by AHP, respectively. The peach cultivars were divided into four evaluation grades by the comprehensive quality score.

Efecto de ácidos húmicos sobre el crecimiento y la composición bioquímica de Arthrospira platensis (Cianobacteria)

Con el propósito de evaluar el efecto de tres concentraciones de ácidos húmicos (AH) 1, 10, 100 mg/L contra una concentración de ácido indol acético (AIA), sobre la producción de biomasa, pigmentos, proteínas, carbohidratos y lípidos de A. platensis; se realizaron cultivos en discontinuo en medio Zarrouk 25% suplementados con AH y AIA, bajo condiciones de aireación constante y fotoperiodos de 12:12 horas, durante 30 días. Se encontró que la producción máxima de biomasafue mayor en el cultivo suplementado con 10 mg/L de AH, comparado con el control y los cultivos suplementados con AIA. De la misma manera fue observado en este tratamiento la producción más alta de pigmentos, proteínas y carbohidratos. Por tanto, se logró incrementar el crecimiento y la producción de metabolitos de A. platensis, lo cual permite observar el uso potencial de estas sustancias como estimulantes biológicos orgánicos.

Effect of Human Milk Appetite Hormones, Macronutrients, and Infant Characteristics on Gastric Emptying and Breastfeeding Patterns of Term Fully Breastfed Infants

Human milk (HM) components influence infant feeding patterns and nutrient intake, yet it is unclear how they influence gastric emptying (GE), a key component of appetite regulation. This study analyzed GE of a single breastfeed, HM appetite hormones/macronutrients and demographics/anthropometrics/body composition of term fully breastfed infants (n = 41, 2 and/or 5 mo). Stomach volumes (SV) were calculated from pre-/post-feed ultrasound scans, then repeatedly until the next feed. Feed volume (FV) was measured by the test-weigh method. HM samples were analyzed for adiponectin, leptin, fat, lactose, total carbohydrate, lysozyme, and total/whey/casein protein. Linear regression/mixed effect models were used to determine associations between GE/feed variables and HM components/infant anthropometrics/adiposity. Higher FVs were associated with faster (−0.07 [−0.10, −0.03], p < 0.001) GE rate, higher post-feed SVs (0.82 [0.53, 1.12], p < 0.001), and longer GE times (0.24 [0.03, 0.46], p = 0.033). Higher whey protein concentration was associated with higher post-feed SVs (4.99 [0.84, 9.13], p = 0.023). Longer GE time was associated with higher adiponectin concentration (2.29 [0.92, 3.66], p = 0.002) and dose (0.02 [0.01, 0.03], p = 0.005), and lower casein:whey ratio (−65.89 [−107.13, −2.66], p = 0.003). FV and HM composition influence GE and breastfeeding patterns in term breastfed infants.

Defatted coconut residue crude polysaccharides as potential prebiotics: study of their effects on proliferation and acidifying activity of probiotics in vitro

This paper reports on the extraction, partial characterization and the potential application of crude polysaccharides from defatted coconut residue as a prebiotic. The coconut residue was defatted and extracted to obtain the crude polysaccharides and its physicochemical properties were determined. The crude polysaccharides were assessed for monosaccharide composition, total carbohydrate content, reducing sugar concentration and protein content determination. The functional group and structural elucidation of crude polysaccharides was also done using Fourier transform infrared spectra analysis. The product was then subjected to artificial human gastric juice treatment to determine digestibility. Finally, an in vitro proliferation and acid production by two probiotic bacteria namely Lactobacillus casei Shirota and Lactobacillus bulgaricus were included in this study. It was found that the defatted coconut residue contained ash (0.54%), moisture (55.42%), protein (1.69%), crude fat (17.26%) and carbohydrate (25.73%). The percentage of crude polysaccharides extracted was 0.73 ± 0.04. The two fractions of monosaccharides obtained were glucose and fructose. Total carbohydrate content of DCR was 13.35% (w/v). The quantitative value of the reducing sugars obtained was 20.71%. Protein content in the crude polysaccharides was 0.009% and the peaks which indicated the presence of protein were observed at around 1640 cm^-1 (amide I) and 1530 cm^-1 (amide II). DCR crude polysaccharides were highly resistant (88%) to hydrolysis when subjected to artificial human gastric juice. The product was found to markedly stimulate two tested probiotics to proliferate and produce organic acids. All the above findings are supportive of the fact that polysaccharides extracted from DCR, an industrial waste, have a vast potential to be exploited as novel prebiotics.

Anaerobic co-digestion of food waste and chemically enhanced primary-treated sludge under mesophilic and thermophilic conditions

Anaerobic co-digestion of food waste with primary sewage sludge is beneficial for urban centers, while the optimized conditions reported in the literature are not locally suitable for Hong Kong. Therefore, the present study was aimed to develop an optimized mixing ratio of food waste to chemically enhanced primary-treated sewer sludge (CEPT) for co-digestion using batch tests under mesophilic (37°C) and thermophilic (55°C) conditions. The mixing ratios of 1:1, 1:2, 1:3, 2:1 and 3:1 (v v(-1)) of food waste to CEPT sludge was tested under the following conditions: temperature - 35°C and 55°C; pH - not regulated; agitation - 150 rpm and time - 20 days. The thermophilic incubations led a good hydrolysis rate and 2-12-fold higher enzyme activities than in mesophilic incubations for different mixing ratios. While the acidogenesis were found retarded that leading to 'sour and stuck' digestion for all mixing ratio of food waste to CEPT sludge from thermophilic incubations. The measured zeta potential was most favourable (-5 to -16.8 mV) for methane production under thermophilic incubations; however the CH4 recovery was less than that in mesophilic incubations. The results suggested that the quick hydrolysis and subsequent acid accumulation under thermophilic incubation lead to inhibited methanogenesis at the early stage than in mesophilic systems. It is concluded that buffer addition is therefore required for any mixing ratio of food waste to CEPT sludge for improved CH4 recovery for both mesophilic and thermophilic operations.

In field conditions, commercial pigment grade TiO2 was not harmful to terrestrial isopods but reduced leaf litter fragmentation

We investigated the effects of a commercial pigment grade rutile TiO2 on the terrestrial isopod Porcellio scaber in three locations that differed in terms of abiotic and biotic conditions: the laboratory, open air, and the closed barn. Mortality and isopod energy reserves (digestive gland total proteins, lipids and carbohydrates) were not affected following 14days exposure to up to 1000mg TiO2 per kg dry leaves (mg/kg) under any experimental scenario. However, in the field tests, isopods consumption of TiO2-coated leaves was reduced compared to that of uncoated leaves and the decrease was not dose-dependent. The highest reduction was in the closed barn (45-56%) rather than in the open-air (38-40%). In laboratory-based food choice tests, isopods neither preferred nor avoided leaves coated with TiO2, suggesting that rather than sensing the TiO2 on the leaves directly, the isopods under open-air and barn exposure responded to altered attractiveness and/or palatability of the TiO2 amended leaves. We propose that this could be due to altered microbial population on the leaves, a hypothesis that requires further investigation. Although short-term exposure to atmospheric deposition of up to 1000mg/kg commercial TiO2 is unlikely to pose an immediate threat to isopod mortality and energy balance, reduced leaf feeding may have implications for the decomposition of plant material.

Techno-economic and life-cycle assessment of an attached growth algal biorefinery

This study examined the sustainability of generating renewable diesel via hydrothermal liquefaction (HTL) of biomass from a rotating algal biofilm reactor. Pilot-scale growth studies and laboratory-scale HTL experiments were used to validate an engineering system model. The engineering system model served as the foundation to evaluate the economic feasibility and environmental impact of the system at full scale. Techno-economic results indicate that biomass feedstock costs dominated the minimum fuel selling price (MFSP), with a base case of $104.31per gallon. Life-cycle assessment results show a base-case global warming potential (GWP) of 80gCO2-eMJ(-1) and net energy ratio (NER) of 1.65 based on a well-to-product system boundary. Optimization of the system reduces MFSP, GWP and NER to $11.90Gal(-1), -44gCO2-eMJ(-1), and 0.33, respectively. The systems-level impacts of integrating algae cultivation with wastewater treatment were found to significantly reduce environmental impact. Sensitivity analysis showed that algal productivity most significantly affected fuel selling price, emphasizing the importance of optimizing biomass productivity.

An arsenate-reducing and alkane-metabolizing novel bacterium, Rhizobium arsenicireducens sp. nov., isolated from arsenic-rich groundwater

A novel arsenic (As)-resistant, arsenate-respiring, alkane-metabolizing bacterium KAs 5-22^T, isolated from As-rich groundwater of West Bengal was characterized by physiological and genomic properties. Cells of strain KAs 5-22^T were Gram-stain-negative, rod-shaped, motile, and facultative anaerobic. Growth occurred at optimum of pH 6.0-7.0, temperature 30 °C. 16S rRNA gene affiliated the strain KAs 5-22^T to the genus Rhizobium showing maximum similarity (98.4 %) with the type strain of Rhizobium naphthalenivorans TSY03b^T followed by (98.0 % similarity) Rhizobium selenitireducens B1^T. The genomic G + C content was 59.4 mol%, and DNA-DNA relatedness with its closest phylogenetic neighbors was 50.2 %. Chemotaxonomy indicated UQ-10 as the major quinone; phosphatidylethanolamine, phosphatidylglycerol, and diphosphatidylglycerol as major polar lipids; C_16:0, C_17:0, 2-OH C_10:0, 3-OH C_16:0, and unresolved C_18:1 ɷ7C/ɷ9C as predominant fatty acids. The cells were found to reduce O₂, As⁵⁺, NO₃^-, SO₄^2- and Fe³⁺ as alternate electron acceptors. The strain's ability to metabolize dodecane or other alkanes as sole carbon source using As⁵⁺ as terminal electron acceptor was supported by the presence of genes encoding benzyl succinate synthase (bssA like) and molybdopterin-binding site (mopB) of As⁵⁺ respiratory reductase (arrA). Differential phenotypic, chemotaxonomic, genotypic as well as physiological properties revealed that the strain KAs 5-22^T is separated from its nearest recognized Rhizobium species. On the basis of the data presented, strain KAs 5-22^T is considered to represent a novel species of the genus Rhizobium, for which the name Rhizobium arsenicireducens sp. nov. is proposed as type strain (=LMG 28795^T=MTCC 12115^T).

A comparative study of the growth of Tetraselmis sp. in large scale fixed depth and decreasing depth raceway ponds

In this study, an alternative approach was proposed where excess seawater would be added only during inoculation (DD) rather than daily addition (FD). Growth and metabolite contents of Tetraselmis sp. weren't affected for daily increase of 2% NaCl salinity. Tetraselmis sp. was then cultured in DD and FD pond. In DD pond, initial culture depth was 23.5cm and its depth reduced as no water was added; for FD pond, everyday sterilized seawater was added to maintain 20cm depth. DD pond had higher biomass productivity compared to FD pond, until DD pond was deeper than FD pond; metabolite content and FAME profile of Tetraselmis sp. were also similar in both cultures. Therefore, considering the simplicity in operation, halo tolerant microalgae can be grown in DD pond method.

Effect of maltodextrin on characteristics and antioxidative activity of spray-dried powder of gelatin and gelatin hydrolysate from scales of spotted golden goatfish

Characteristics and antioxidative activity of gelatin and gelatin hydrolysate powders from scale of spotted golden goatfish using maltodextrin as a carrier agent at different ratios [1:0, 2:1, 1:1 and 1:2 (w/w)] were investigated. Gelatin hydrolysates with 40 % degree of hydrolysis exhibited the highest antioxidative activity. With increasing maltodextrin proportions, the resulting powders showed an increase in yields, total sugar content and whiteness with coincidental decrease in [Formula: see text], [Formula: see text]-values and browning intensity. Solubility of gelatin powder increased with increase in maltodextrin proportion. Gelatin powder was spherical with smooth surface of hydrolysate varied, regardless of maltodextrin levels. Gelatin hydrolysate powder form, uniform agglomerates when maltodextrin was incorporated. DPPH and ABTS radical scavenging activities and ferric-reducing antioxidant power of gelatin and gelatin hydrolysate decreased when maltodextrin was used as a carrier agent. Thus, maltodextrin levels directly affected characteristics and antioxidative activity of gelatin and gelatin hydrolysate powders.

Genetic Diversity and Association Characters of Bacteria Isolated from Arbuscular Mycorrhizal Fungal Spore Walls

Association between arbuscular mycorrhizal fungi (AMF) and bacteria has long been studied. However, the factors influencing their association in the natural environment is still unknown. This study aimed to isolate bacteria associated with spore walls of AMF and identify their potential characters for association. Spores collected from coastal reclamation land were differentiated based on their morphology and identified by 18S rDNA sequencing as Funneliformis caledonium, Racocetra alborosea and Funneliformis mosseae. Bacteria associated with AMF spore walls were isolated after treating them with disinfection solution at different time intervals. After 0, 10 and 20 min of spore disinfection, 86, 24 and 10 spore associated bacteria (SAB) were isolated, respectively. BOX-PCR fingerprinting analysis showed that diverse bacterial communities were associated to AMF spores. Bacteria belonging to the same genera could associate with different AMF spores. Gram positive bacteria were more closely associated with AMF spores. Isolated SAB were characterized and tested for spore association characters such as chitinase, protease, cellulase enzymes and exopolysaccharide production (EPS). Among the 120 SAB, 113 SAB were able to show one or more characters for association and seven SAB did not show any association characters. The 16S rDNA sequence of SAB revealed that bacteria belonging to the phyla Firmicutes, Proteobacteria, Actinobacteria and Bactereiodes were associated with AMF spore walls.

High Affinity Mannotetraose as an Alternative to Dextran in ConA Based Fluorescent Affinity Glucose Assay Due to Improved FRET Efficiency

Diabetes mellitus affects millions of people worldwide and requires that individuals tightly self-regulate their blood glucose levels to minimize the associated secondary complications. Continuous monitoring devices potentially offer patients a long-term means to tightly monitor their glucose levels. In recent years, fluorescent affinity sensors based on lectins (e.g., Concanavalin A (ConA)) have been implemented in such devices. Traditionally, these sensors pair the lectin with a multivalent ligand, like dextran, in order to develop a competitive binding assay that changes its fluorescent properties in response to the surrounding glucose concentrations. This work introduces a new type of fluorescent ligand for FRET-based assays in an attempt to improve the sensitivity of such assays. This ligand is rationally designed to present a core trimannose structure and a donor fluorophore in close proximity to one another. This design decreases the distance between the FRET donor and the FRET acceptors on ConA to maximize the FRET efficiency upon binding of the ligand to ConA. This work specifically compares the FRET efficiency and sensitivity of this new competing ligand with a traditional dextran ligand, showing that the new ligand has improved characteristics. This work also tested the long-term thermal stability of the assay based on this new competing ligand and displayed a MARD of less than 10% across the physiological range of glucose after 30 days incubation at 37 °C. Ultimately, this new type of fluorescent ligand has the potential to significantly improve the accuracy of continuous glucose monitoring devices based on the competitive binding sensing approach.

Hydrolysis of olive mill waste to enhance rhamnolipids and surfactin production

The aim of this work was to demonstrate the effectiveness of hydrolysis pretreatment of olive mill (OMW) waste before use as a carbon source in biosurfactant production by fermentation. Three hydrolysis methods were assessed: enzymatic hydrolysis, acid pretreatment plus enzymatic hydrolysis, and acid hydrolysis. Fermentation was carried out using two bacterial species: Pseudomonas aeruginosa and Bacillus subtilis. Our results showed that the enzymatic hydrolysis was the best pretreatment, yielding up to 29.5 and 13.7mg/L of rhamnolipids and surfactins respectively. Glucose did not show significant differences in comparison to enzymatically hydrolysed OMW. At the best conditions found rhamnolipids and surfactins reached concentrations of 299 and 26.5mg/L; values considerably higher than those obtained with non-hydrolysed OMW. In addition, enzymatic pretreatment seemed to partially reduce the inhibitory effects of OMW on surfactin production. Therefore, enzymatic hydrolysis proved to effectively increase the productivity of these biosurfactants using OMW as the sole carbon source.

Efficient hydrolysis of cellulose into glucose over sulfonated polynaphthalene (SPN) and rapid determination of glucose using positive corona discharge ion mobility spectrometry

Sulfonated polynaphthalene (SPN) was successfully developed as solid acid catalysts for the hydrolysis of cellulose into high yields of glucose.

Harvesting of freshwater microalgae with microbial bioflocculant: a pilot-scale study

BACKGROUND

Nowadays, bioflocculation is considered as a potential technology that could be able to alleviate microalgae dewatering cost regarded as the cornerstone hindrance of their full-scale application. However, most bioflocculation studies reported are laboratory scales. This study examined a pilot-scale and in situ flocculation of freshwater microalgae Desmodesmus brasiliensis by microbial bioflocculant. Biochemical composition of microalgal biomass was analyzed to evaluate the applicability of bioflocculation for microalgae-based biofuel production.

RESULTS

The flocculation efficiency >98 % was achieved at both pilot-scale and in situ treatment. Bioflocculation is simple, effective, economic, and environmentally friendly. Even though total proteins recovered from biomass harvested by centrifugation and that harvested by bioflocculation were significantly different, there was no significant difference in total carbohydrates and total lipids recovered from either biomass harvested by centrifugation or biomass harvested by bioflocculation.

CONCLUSION

The results herein presented, doubtlessly demonstrated that the γ-PGA bioflocculant produced by Bacillus licheniformis CGMCC 2876 is applicable for commercial-scale microalgae harvesting. In addition, bioflocculation process cost could greatly be reduced by in situ operation as no investment cost is needed for a separate flocculation tank and mixing device. Furthermore, bioflocculation method developed is a worthy microalgae harvesting method for algal-based biofuel production.Graphical abstractThe addition of bioflocculant to microalgae cultures followed by mixing elicits, the formation of heavy flocs which settle out by gravity sedimentation in a relatively short settling time.

In vitro fermentation of prebiotic carbohydrates by intestinal microbiota in the presence of Lactobacillus amylovorus DSM 16998

The aim of this study was to evaluate the assimilation of the prebiotics fructooligosaccharides (FOS), galactooligosaccharides (GOS), and Konjac glucomannan oligosaccharides (KGMO) by three human (H1, H2 and H3) and pig (P1, P2 and P3) faecal microbiotas in the presence of the potentially probiotic strain Lactobacillus amylovorus DSM 16698, using an in vitro batch fermentation model. Total bacteria and L. amylovorus populations were quantified using qPCR and biochemical features (pH, production of short chain fatty acids (SCFA), lactate, ammonia, and carbohydrate assimilation) were determined. L. amylovorus did not have a competitive advantage under in vitro conditions, reflected by its reduced relative abundance during fermentation despite the carbohydrate sources added. Pig microbiota sustained more stable probiotic counts. Intermittently produced lactate was possibly assimilated by the microbiota and converted to other SCFA as the carbohydrates were assimilated, with H3 probably having a methanogenic metabolism with high lactate and acetate consumption except in the presence of FOS, which assimilation resulted in the highest total SCFA for this volunteer. Addition of FOS also resulted in lower pH and ammonia, which might have been used as nitrogen source by pig microbiota. KGMO needed longer fermentation periods to be completely assimilated by both human and porcine faecal microbiotas. Overall, our results reinforce the notion that care must be taken when generalising the effects claimed for a given probiotic or potentially probiotic strain, including the combination with different prebiotic substrates, since they may vary considerably among individuals, which is important when studying potentially pro- and prebiotic combinations for application as functional foods and feed ingredients.

Genome-scale metabolic reconstructions and theoretical investigation of methane conversion in Methylomicrobium buryatense strain 5G(B1)

BACKGROUND

Methane-utilizing bacteria (methanotrophs) are capable of growth on methane and are attractive systems for bio-catalysis. However, the application of natural methanotrophic strains to large-scale production of value-added chemicals/biofuels requires a number of physiological and genetic alterations. An accurate metabolic model coupled with flux balance analysis can provide a solid interpretative framework for experimental data analyses and integration.

RESULTS

A stoichiometric flux balance model of Methylomicrobium buryatense strain 5G(B1) was constructed and used for evaluating metabolic engineering strategies for biofuels and chemical production with a methanotrophic bacterium as the catalytic platform. The initial metabolic reconstruction was based on whole-genome predictions. Each metabolic step was manually verified, gapfilled, and modified in accordance with genome-wide expression data. The final model incorporates a total of 841 reactions (in 167 metabolic pathways). Of these, up to 400 reactions were recruited to produce 118 intracellular metabolites. The flux balance simulations suggest that only the transfer of electrons from methanol oxidation to methane oxidation steps can support measured growth and methane/oxygen consumption parameters, while the scenario employing NADH as a possible source of electrons for particulate methane monooxygenase cannot. Direct coupling between methane oxidation and methanol oxidation accounts for most of the membrane-associated methane monooxygenase activity. However the best fit to experimental results is achieved only after assuming that the efficiency of direct coupling depends on growth conditions and additional NADH input (about 0.1-0.2 mol of incremental NADH per one mol of methane oxidized). The additional input is proposed to cover loss of electrons through inefficiency and to sustain methane oxidation at perturbations or support uphill electron transfer. Finally, the model was used for testing the carbon conversion efficiency of different pathways for C1-utilization, including different variants of the ribulose monophosphate pathway and the serine cycle.

CONCLUSION

We demonstrate that the metabolic model can provide an effective tool for predicting metabolic parameters for different nutrients and genetic perturbations, and as such, should be valuable for metabolic engineering of the central metabolism of M. buryatense strains.