Early pattern of calcification in the dorsal carapace of the blue crab,Callinectes sapidus

Unveiling the Formation Pathway of Vaterite from Amorphous Calcium Carbonate Using Metadynamics Simulations

Calcium carbonate is a compound that is widely distributed throughout the Earth as a natural mineral and a material produced by biological activities. The crystal structure of calcium carbonate has three polymorphs: the most thermodynamically stable calcite, followed by aragonite and vaterite. Of the three crystalline phases, the formation process and structure of the most unstable, vaterite, remain mysterious. In this study, the pathway for forming the vaterite crystal structure from amorphous CaCO3 (ACC) is reproduced using well-tempered metadynamics molecular dynamics simulations. The structures sampled at multiple minima on the energy landscape are refined through first-principles calculations based on density functional theory. The sampled structures are assigned space groups and classified as calcite- and vaterite-like structures according to the arrangement of CO3 2- and Ca2+ sheets. The initial crystal structure produced from ACC is a monoclinic crystal with Ca2+ sheets and CO3 2- lying in the interlayer; however, it does not exhibit the 3-fold symmetry of calcite. Calcite structures with 3-fold symmetry, or orthorhombic crystals with rotated CO3 2- units, as found in vaterite, can be derived from this structure. The orthorhombic structure then transitions to the more stable monoclinic form, which is likely vaterite. The understanding of phase transitions based on the diverse crystal structures of calcium carbonate revealed in this study provides a predictive view of biomineralization and carbonation reactions of cementitious materials.

The cuticle of Agnostina (basal Euarthropoda) was three-layered

The cuticle of four Agnostina families is notably complex, challenging the previously proposed one-layer model. It consists of three distinct layers, with the outer layer being significantly thicker than the middle and inner layers; two upper layers are laminated. The inner layer is very thin and rests on a base of fibrils arranged in a rhomboidal mesh. Comparative analysis suggests that during evolution, the middle and inner layers have decreased in thickness, leaving the outer layer relatively thick. These distinctive structural features are possibly associated with miniaturization of agnostines. Their cuticle resembles that of chelicerates more than that of crustaceans.

Bioinspired Materials for Controlling Mineral Adhesion: From Innovation Design to Diverse Applications

The advancement of controllable mineral adhesion materials has significantly impacted various sectors, including industrial production, energy utilization, biomedicine, construction engineering, food safety, and environmental management. Natural biological materials exhibit distinctive and controllable adhesion properties that inspire the design of artificial systems for controlling mineral adhesion. In recent decades, researchers have sought to create bioinspired materials that effectively regulate mineral adhesion, significantly accelerating the development of functional materials across various emerging fields. Herein, we review recent advances in bioinspired materials for controlling mineral adhesion, including bioinspired mineralized materials and bioinspired antiscaling materials. First, a systematic overview of biological materials that exhibit controllable mineral adhesion in nature is provided. Then, the mechanism of mineral adhesion and the latest adhesion characterization between minerals and material surfaces are introduced. Later, the latest advances in bioinspired materials designed for controlling mineral adhesion are presented, ranging from the molecular level to micro/nanostructures, including bioinspired mineralized materials and bioinspired antiscaling materials. Additionally, recent applications of these bioinspired materials in emerging fields are discussed, such as industrial production, energy utilization, biomedicine, construction engineering, and environmental management, highlighting their roles in promoting or inhibiting aspects. Finally, we summarize the ongoing challenges and offer a perspective on the future of this charming field.

Structural diversity of crustacean exoskeletons and its implications for biomimetics

The crustacean cuticle is a biological composite material consisting of chitin-protein fibres in a mineralized matrix. Recent research has revealed a surprising range of fibre architectures and mineral compositions of crustacean skeletal structures adapted to various mechanical demands. It is becoming increasingly clear that the organic fibres in the cuticle may be organized in patterns differing from the standard twisted plywood model. Observed fibre architectures in protruding skeletal structures include longitudinal and circular parallel fibre arrays. Skeletal minerals often include calcium phosphates in addition to calcium carbonates. Furthermore, skeletal properties are affected by protein cross-linking, which replaces mineralization as a stiffening mechanism in some structures. Several common structural motifs, such as the stiffening of the outer skeletal layers, the incorporation of non-mineralized cuticle in exposed structures, and interchanging layers of parallel fibres and the twisted plywood structure, can be identified in skeletal elements with similar functions. These evolutionary solutions have the potential for biomimetic applications, particularly as manufacturing technologies advance. To make use of this potential, we need to understand the processes behind the formation of the crustacean exoskeleton and determine which features are truly adaptive and worth mimicking.

Protein-guided biomimetic nanomaterials: a versatile theranostic nanoplatform for biomedical applications

Over the years, bioinspired mineralization-based approaches have been applied to synthesize multifunctional organic-inorganic nanocomposites. These nanocomposites can address the growing demands of modern biomedical applications. Proteins, serving as vital biological templates, play a pivotal role in the nucleation and growth processes of various organic-inorganic nanocomposites. Protein-mineralized nanomaterials (PMNMs) have attracted significant interest from researchers due to their facile and convenient preparation, strong physiological activity, stability, impressive biocompatibility, and biodegradability. Nevertheless, few comprehensive reviews have expounded on the progress of these nanomaterials in biomedicine. This article systematically reviews the principles and strategies for constructing nanomaterials using protein-directed biomineralization and biomimetic mineralization techniques. Subsequently, we focus on their recent applications in the biomedical field, encompassing areas such as bioimaging, as well as anti-tumor, anti-bacterial, and anti-inflammatory therapies. Furthermore, we discuss the challenges encountered in practical applications of these materials and explore their potential in future applications. This review aspired to catalyze the continued development of these bioinspired nanomaterials in drug development and clinical diagnosis, ultimately contributing to the fields of precision medicine and translational medicine.

Exoskeleton protein repertoires in decapod crustaceans revealed distinct biomineralization evolution with molluscs

Crustaceans are the champions of mineral mobilization and deposition in the animal kingdom due to their unique ability to rapidly and periodically mineralize and demineralize their exoskeletons. They are commonly covered with mineralized exoskeletons for protection and regularly molt throughout their lives. Mineralized crustacean exoskeletons are formed under the control of macromolecules especially matrix proteins but the types of matrix proteins are understudied compared to those in molluscan shells. This gap hinders our understanding of their evolutionary paths compared with those of molluscs. Here, we comprehensively analyzed matrix proteins in the exoskeleton of two crabs, one shrimp, and one crayfish and resulted in a major improvement (∼10-fold) in the identification of biomineralization proteins compared to conventional methods for decapod crustaceans. By a comparison with well-studied molluscan biomineralization proteins, we found that decapod crustaceans evolved novel proteins to form mineralized exoskeletons while sharing some proteins with those of molluscs. Our study sheds light on their evolution and adaption to different environment for exoskeleton formation and provides a foundation for further studies of mineralization in crustaceans under normal and climate-changed conditions. SIGNIFICANCE: Most crustaceans have mineralized exoskeletons as protection. How they form these hierarchical structures is still unclear. This is due partially to the understudied matrix proteins in the minerals. This study filled such a gap by using proteomic analysis of matrix proteins from four decapod crustacean exoskeletons. Many novel proteins were discovered which enabled a solid comparison with those of molluscs. By comparison, we proposed that crustaceans evolved novel proteins to form mineralized exoskeletons while sharing some proteins with those of molluscs. This is useful for us to understand the evolution of two major biomineralized phylum.

Mechanical properties, degree of sclerotisation and elemental composition of the gastric mill in the red swamp crayfish Procambarus clarkii (Decapoda, Crustacea)

The gastric mill of Decapoda is a unique feature, which comprises teeth, stabilizing ossicles, and particle sorting setae. Involved in the fragmentation and sorting of the food, this structure serves as interface between the organism and its environment. As material properties complement morphology and hold information about function and trophic preferences, we here provide a basis for more comparative research on gastric mills. For gastric mill components of the adult red swamp crayfish Procambarus clarkii, we studied (a) the micro-structure via scanning electron microscopy, (b) the elemental composition by energy-dispersive X-ray spectroscopy, (c) the heterogeneities in material properties and degree of tanning (autofluorescence) by confocal laser scanning microscopy, and (d) the mechanical properties hardness and elasticity by nanoindentation technique. The morphology and micro-structure were previously described for this species, but the mechanical properties and the autofluorescence were not studied before. As epicuticle and exocuticle could be analyzed individually, material property gradients, with values decreasing from the interacting surface towards interior, could be determined. Finally, we were able to relate the mechanical property data with the elemental composition and the degree of tanning. We found that the epicuticle of the teeth is among the hardest and stiffest biological materials in invertebrates due to the incorporations of high proportions of silicon.

Meta-analysis suggests negative, but pCO2-specific, effects of ocean acidification on the structural and functional properties of crustacean biomaterials

Crustaceans comprise an ecologically and morphologically diverse taxonomic group. They are typically considered resilient to many environmental perturbations found in marine and coastal environments, due to effective physiological regulation of ions and hemolymph pH, and a robust exoskeleton. Ocean acidification can affect the ability of marine calcifying organisms to build and maintain mineralized tissue and poses a threat for all marine calcifying taxa. Currently, there is no consensus on how ocean acidification will alter the ecologically relevant exoskeletal properties of crustaceans. Here, we present a systematic review and meta-analysis on the effects of ocean acidification on the crustacean exoskeleton, assessing both exoskeletal ion content (calcium and magnesium) and functional properties (biomechanical resistance and cuticle thickness). Our results suggest that the effect of ocean acidification on crustacean exoskeletal properties varies based upon seawater pCO2 and species identity, with significant levels of heterogeneity for all analyses. Calcium and magnesium content was significantly lower in animals held at pCO2 levels of 1500-1999 µatm as compared with those under ambient pCO2. At lower pCO2 levels, however, statistically significant relationships between changes in calcium and magnesium content within the same experiment were observed as follows: a negative relationship between calcium and magnesium content at pCO2 of 500-999 µatm and a positive relationship at 1000-1499 µatm. Exoskeleton biomechanics, such as resistance to deformation (microhardness) and shell strength, also significantly decreased under pCO2 regimes of 500-999 µatm and 1500-1999 µatm, indicating functional exoskeletal change coincident with decreases in calcification. Overall, these results suggest that the crustacean exoskeleton can be susceptible to ocean acidification at the biomechanical level, potentially predicated by changes in ion content, when exposed to high influxes of CO2. Future studies need to accommodate the high variability of crustacean responses to ocean acidification, and ecologically relevant ranges of pCO2 conditions, when designing experiments with conservation-level endpoints.

Calculations of the Evolution of the Ca L23 Fine Structure in Amorphous Calcium Carbonate

Amorphous calcium carbonate (ACC) has been found in many different organisms. Biogenic ACC is frequently a precursor in the formation of calcite and aragonite. The process of structural transformation is therefore of great interest in the study of crystallization pathways in biomineralization. Changes in the prepeak/main peak (L₂'/L₂) intensity ratio of the Ca L₂₃-edge X-ray absorption spectroscopy (XAS) of Ca-rich particles in skeleton-building cells of sea urchin larva revealed that ACC precipitates through a continuum of states rather than through abrupt phase transitions involving two distinct phases as formerly believed. Using an atomic multiplet code, we show that only a tetragonal or "umbrella-like" distortion of the Ca coordination polyhedron can give rise to the observed continuum of states. We also show on the basis of the structures obtained from previous molecular dynamics simulations of hydrated nanoparticles that the Ca L₂₃-edge is not sensitive to atomic arrangements in the early stages of the transformation process.

Inorganic phosphate in growing calcium carbonate abalone shell suggests a shared mineral ancestral precursor

The presence of phosphate from different origins (inorganic, bioorganic) is found more and more in calcium carbonate-based biominerals. Phosphate is often described as being responsible for the stabilization of the transient amorphous calcium carbonate phase. In order to specify the composition of the mineral phase deposited at the onset of carbonated shell formation, the present study investigates, down to the nanoscale, the growing shell from the European abalone Haliotis tuberculata, using a combination of solid state nuclear magnetic resonance, scanning transmission electron microscope and spatially-resolved electron energy loss spectroscopy techniques. We show the co-occurrence of inorganic phosphate with calcium and carbonate throughout the early stages of abalone shell formation. One possible hypothesis is that this first-formed mixed mineral phase represents the vestige of a shared ancestral mineral precursor that appeared early during Evolution. In addition, our findings strengthen the idea that the final crystalline phase (calcium carbonate or phosphate) depends strongly on the nature of the mineral-associated proteins in vivo.

Phosphate involvement in calcium carbonate biominerals raises questions on biomineralisation pathways. Here, the authors explore the presence of phosphate in the growing shell of the European abalone and suggest a shared mixed mineral ancestral precursor with final crystal phase being selected by mineral-associated proteins.

Structure and mineralization of the spearing mantis shrimp (Stomatopoda; Lysiosquillina maculata) body and spike cuticles

Stomatopoda is a crustacean order including sophisticated predators called spearing and smashing mantis shrimps that are separated from the well-studied Eumalacotraca since the Devonian. The spearing mantis shrimp has developed a spiky dactyl capable of impaling fishes or crustaceans in a fraction of second. In this high velocity hunting technique, the spikes undergo an intense mechanical constraint to which their exoskeleton (or cuticle) has to be adapted. To better understand the spike cuticle internal architecture and composition, electron microscopy, X-ray microanalysis and Raman spectroscopy were used on the spikes of 7 individuals (collected in French Polynesia and Indonesia), but also on parts of the body cuticle that have less mechanical stress to bear. In the body cuticle, several specificities linked to the group were found, allowing to determine the basic structure from which the spike cuticle has evolved. Results also highlighted that the body cuticle of mantis shrimps could be a model close to the ancestral arthropod cuticle by the aspect of its biological layers (epi- and procuticle including exo- and endocuticle) as well as by the Ca-carbonate/phosphate mineral content of these layers. In contrast, the spike cuticle exhibits a deeply modified organization in four functional regions overprinted on the biological layers. Each of them has specific fibre arrangement or mineral content (fluorapatite, ACP or phosphate-rich Ca-carbonate) and is thought to assume specific mechanical roles, conferring appropriate properties on the entire spike. These results agree with an evolution of smashing mantis shrimps from primitive stabbing/spearing shrimps, and thus also allowed a better understanding of the structural modifications described in previous studies on the dactyl club of smashing mantis shrimps.

Adsorption of Reactive Dye onto Uçá Crab Shell (Ucides cordatus): Scale-Up and Comparative Studies

The growing interest in using low-cost methods that use natural sources makes the study of adsorption processes increasingly frequent and common. Thus, the use of uçá crab shell (Ucides cordatus) in the adsorption of reactive dye (reactive blue 222) was studied in two systems (S1 and S2) in a finite bath, with a scale-up of 12 times and considering different forms of agitation. The biosorbent material was previously characterized from FTIR and EDX spectroscopies, SEM, physical adsorption of N2, and point of zero charge. The kinetic study allowed modeling the experimental data and defining the equilibrium time for the S1 system as 400 min, and the S2 system as 360 min. The equilibrium adsorption capacities are 3.623 mg·g−1 (S1) and 4.191 mg·g−1 (S2). The pseudo-second-order (PSO) model best described the experimental data. The favorable multilayer adsorption was confirmed for the isothermal analysis, and the Freundlich and Sips models represented the experimental data of S1 and S2, respectively. The results obtained are positive indications of the scale-up of the S2 system.

The dorsal tergite cuticle of Helleria brevicornis: Ultrastructure, mineral distribution, calcite microstructure and texture

Among the terrestrial Crustacea, isopods have most successfully established themselves in a large variety of terrestrial habitats. As in most Crustacea, their cuticle consists of a hierarchically organised organic phase of chitin-protein fibrils, containing calcium carbonate and some calcium phosphate. In previous studies, we examined the tergite cuticle of Tylos europaeus, which lives on seashores and burrows into moist sand. In this study, we investigate the closely related species Helleria brevicornis, which is completely terrestrial and lives in leaf litter and humus and burrows into the soil. To get deeper insights in relation between the structure of the organic and mineral phase in species living in diverse habitats, we have investigated the structure, and the chemical and crystallographic properties of the tergite cuticle using various preparation techniques, and microscopic and analytical methods. The results reveal long and short epicuticular sensilla with brushed tips on the tergite surface that do not occur in T. europaeus. As in T. europaeus a distal exocuticle, which contains a low number of organic fibres, contains calcite while the subjacent layers of the exo- and endocuticle contain amorphous calcium carbonate. The distal exocuticle contains a polygonal pattern of mineral initiation sites that correspond to interprismatic septa described for decapod crabs. The shape and position of calcite units do not follow the polygonal pattern of the septa. The results indicate that the calcite units form by crystallisation from an amorphous phase that progresses from both margins of the septa to the centres of the polygons.

Patterns of Element Incorporation in Calcium Carbonate Biominerals Recapitulate Phylogeny for a Diverse Range of Marine Calcifiers

Elemental ratios in biogenic marine calcium carbonates are widely used in geobiology, environmental science, and paleoenvironmental reconstructions. It is generally accepted that the elemental abundance of biogenic marine carbonates reflects a combination of the abundance of that ion in seawater, the physical properties of seawater, the mineralogy of the biomineral, and the pathways and mechanisms of biomineralization. Here we report measurements of a suite of nine elemental ratios (Li/Ca, B/Ca, Na/Ca, Mg/Ca, Zn/Ca, Sr/Ca, Cd/Ca, Ba/Ca, and U/Ca) in 18 species of benthic marine invertebrates spanning a range of biogenic carbonate polymorph mineralogies (low-Mg calcite, high-Mg calcite, aragonite, mixed mineralogy) and of phyla (including Mollusca, Echinodermata, Arthropoda, Annelida, Cnidaria, Chlorophyta, and Rhodophyta) cultured at a single temperature (25°C) and a range of pCO₂ treatments (ca. 409, 606, 903, and 2856 ppm). This dataset was used to explore various controls over elemental partitioning in biogenic marine carbonates, including species-level and biomineralization-pathway-level controls, the influence of internal pH regulation compared to external pH changes, and biocalcification responses to changes in seawater carbonate chemistry. The dataset also enables exploration of broad scale phylogenetic patterns of elemental partitioning across calcifying species, exhibiting high phylogenetic signals estimated from both uni- and multivariate analyses of the elemental ratio data (univariate: λ = 0-0.889; multivariate: λ = 0.895-0.99). Comparing partial R ² values returned from non-phylogenetic and phylogenetic regression analyses echo the importance of and show that phylogeny explains the elemental ratio data 1.4-59 times better than mineralogy in five out of nine of the elements analyzed. Therefore, the strong associations between biomineral elemental chemistry and species relatedness suggests mechanistic controls over element incorporation rooted in the evolution of biomineralization mechanisms.

Ocean acidification alters properties of the exoskeleton in adult Tanner crabs, Chionoecetes bairdi

Ocean acidification can affect the ability of calcifying organisms to build and maintain mineralized tissue. In decapod crustaceans, the exoskeleton is a multilayered structure composed of chitin, protein and mineral, predominately magnesian calcite or amorphous calcium carbonate (ACC). We investigated the effects of acidification on the exoskeleton of mature (post-terminal-molt) female southern Tanner crabs, Chionoecetes bairdi. Crabs were exposed to one of three pH levels – 8.1, 7.8 or 7.5 – for 2 years. Reduced pH led to a suite of body region-specific effects on the exoskeleton. Microhardness of the claw was 38% lower in crabs at pH 7.5 compared with those at pH 8.1, but carapace microhardness was unaffected by pH. In contrast, reduced pH altered elemental content in the carapace (reduced calcium, increased magnesium), but not the claw. Diminished structural integrity and thinning of the exoskeleton were observed at reduced pH in both body regions; internal erosion of the carapace was present in most crabs at pH 7.5, and the claws of these crabs showed substantial external erosion, with tooth-like denticles nearly or completely worn away. Using infrared spectroscopy, we observed a shift in the phase of calcium carbonate present in the carapace of pH 7.5 crabs: a mix of ACC and calcite was found in the carapace of crabs at pH 8.1, whereas the bulk of calcium carbonate had transformed to calcite in pH 7.5 crabs. With limited capacity for repair, the exoskeleton of long-lived crabs that undergo a terminal molt, such as C. bairdi, may be especially susceptible to ocean acidification.

Fourier transform infrared spectroscopy of developing bone mineral: from amorphous precursor to mature crystal

Bone mineral development has been described to proceed through an amorphous precursor prior to apatite crystallization. However, further analytical approaches are necessary to identify specific markers of amorphous mineral components in bone. Here, we establish an original Fourier transform infrared (FTIR) spectroscopy approach to allow the specific identification of the amorphous and/or crystalline nature of bone mineral. Using a series of standards, our results demonstrate that obtaining the second derivative of the FTIR spectra could reveal a peak specifically corresponding to amorphous calcium phosphate (ACP) at ∼992 cm-1. The intensity of this peak was strongly correlated to ACP content in standard mixtures. The analysis of a variety of bones showed that a clear ACP peak could be identified as a specific marker of the existence of an amorphous mineral component in developing bones. In contrast, the ACP peak was not detected in the mature bones. Moreover, subjecting developing bones to ex vivo crystallization conditions led to a clear reduction of the ACP peak, further substantiating the conversion of amorphous mineral precursor into mature apatite crystals. Analysis of mineralization in osteogenic cell cultures corroborated our observations, showing the presence of ACP as a major transient component in early mineralization, but not in the mature matrix. Additionally, FTIR imaging revealed that ACP was present in areas of matrix development, distributed around the edges of mineralizing nodules. Using an original analytical approach, this work provides strong evidence to support that bone mineral development is initiated by an amorphous precursor prior to apatite crystallization.

Amphibalanus amphitrite begins exoskeleton mineralization within 48 hours of metamorphosis

Barnacles are ancient arthropods that, as adults, are surrounded by a hard, mineralized, outer shell that the organism produces for protection. While extensive research has been conducted on the glue-like cement that barnacles use to adhere to surfaces, less is known about the barnacle exoskeleton, especially the process by which the barnacle exoskeleton is formed. Here, we present data exploring the changes that occur as the barnacle cyprid undergoes metamorphosis to become a sessile juvenile with a mineralized exoskeleton. Scanning electron microscope data show dramatic morphological changes in the barnacle exoskeleton following metamorphosis. Energy-dispersive X-ray spectroscopy indicates a small amount of calcium (8%) 1 h post-metamorphosis that steadily increases to 28% by 2 days following metamorphosis. Raman spectroscopy indicates calcite in the exoskeleton of a barnacle 2 days following metamorphosis and no detectable calcium carbonate in exoskeletons up to 3 h post-metamorphosis. Confocal microscopy indicates during this 2 day period, barnacle base plate area and height increases rapidly (0.001 mm2 h-1 and 0.30 µm h-1, respectively). These results provide critical information into the early life stages of the barnacle, which will be important for developing an understanding of how ocean acidification might impact the calcification process of the barnacle exoskeleton.

Crystalline and amorphous calcium carbonate as structural components of the Calappa granulata exoskeleton

The exoskeleton of crustaceans consists of chitin biopolymers where the embedded inorganic biominerals, mainly CaCO₃, affect strongly its mechanical properties. Raman and Near Edge X-ray Absorption Fine Structure (NEXAFS) spectroscopies and Transmission Electron Microscopy (TEM) are applied to investigate the CaCO₃ structure in various parts of the Calappa granulata crab exoskeleton. The shape of the main Raman peak of CaCO₃ reveals the presence of two phases which are identified as calcite and amorphous calcium carbonate (ACC). The relative concentration of the two phases in various parts of the exoskeleton is determined from the area ratio under the corresponding peaks. The results of the Ca L_3,2-edge NEXAFS analysis are in line with the Raman findings, since the energy separation of peaks that appear in the lower frequency region of the main L₂ and L₃ peaks due to crystal field splitting, is directly related to the percentage of the ACC phase in the total CaCO₃ mineral content. The C K-edge spectra are used for the determination of the extent of calcification of the exoskeleton. Furthermore, dark and bright field TEM images reveal the presence of nanocrystallites with an average size of 20 nm. The structure of the nanocrystallites, as derived from the Selected Area Electron Diffraction patterns, is calcite. The results suggest that ACC plays a structural role in the exoskeleton of Calappa granulata.

Spatiotemporal control of calcium carbonate nucleation using mechanical deformations of elastic surfaces

Biological systems generate crystalline materials with properties and morphologies that cannot be duplicated using synthetic procedures. Developing strategies that mimic the control mechanisms found in nature would enhance the range of functional materials available for numerous technological applications. Herein, a biomimetic approach based on the mechano-dynamic chemistry of silicone surfaces was used to control the rate of heterogeneous CaCO3 nucleation. Specifically, stretching the silicone surface redistributed functional groups, tuning interfacial energy and thus the rate of CaCO3 crystal formation, as predicted by classical nucleation rate laws. We extended this procedure using microrelief patterns to program surface strain fields to spatially control the location of nucleation. The strategies presented herein represent a fundamental departure from traditional bottom-up crystal engineering, where surfaces are chemically static, to them being active participants in the nucleation process controlling the outcome both spatially and temporally.

Mechanical Resistance in Decapod Claw Denticles: Contribution of Structure and Composition

The decapod crustacean exoskeleton is a multi-layered structure composed of chitin-protein fibers embedded with calcium salts. Decapod claws display tooth-like denticles, which come into direct contact with predators and prey. They are subjected to more regular and intense mechanical stress than other parts of the exoskeleton and therefore must be especially resistant to wear and abrasion. Here, we characterized denticle properties in five decapod species. Dactyls from three brachyuran crabs (Cancer borealis, Callinectes sapidus, and Chionoecetes opilio) and two anomuran crabs (Paralomis birsteini and Paralithodes camtschaticus) were sectioned normal to the contact surface of the denticle, revealing the interior of the denticle and the bulk endocuticle in which it is embedded. Microhardness, micro- and ultrastructure, and elemental composition were assessed along a transect running the width of the cuticle using microindentation hardness testing, optical and scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS), respectively. In all species tested, hardness was dramatically higher-up to ten times-in the denticle than in the bulk endocuticle. Likewise, in all species there was an increase in packing density of mineralized chitin-protein fibers, a decrease in width of the pore canals that run through the cuticle, and a decrease in phosphorous content from endocuticle to denticle. The changes in hardness across the cuticle, and the relationship between hardness, calcium, and magnesium content, however, varied among species. Although mechanical resistance of the denticles was exceptionally high in all species, the basis for resistance appears to differ among species. STATEMENT OF SIGNIFICANCE: Understanding the diverse mechanisms by which animals attain exceptionally high mechanical resistance may enable development of novel, biologically inspired materials. Decapod crustacean claws, and particularly the tooth-like denticles that these claws display, are of interest in this regard, as they must be especially resistant to wear. We assessed mechanical, elemental, and structural properties of the claw cuticle in five decapod species. Without exception, microhardness was dramatically higher in the denticle than in the bulk endocuticle. Multivariant statistical analyses, however, showed that the relationships among microhardness, elemental content, and structural variables differed among species. Such patterns likely result from strong evolutionary pressure on feeding and defensive structures and a trade-off between mechanical properties and energetic cost of exoskeleton formation.

Visualizing Different Crystalline States during the Infrared Imaging of Calcium Phosphates

Methods utilizing relatively simple mathematical operations during physical analyses to enable the visualization of otherwise invisible correlations and effects are of particular appeal to researchers and students in pedagogical settings. At the same time, discerning the amorphous phase from its crystalline counterpart in materials is challenging with the use of vibrational spectroscopy and is nowhere as straightforward as in phase composition analytical methods such as X-ray diffraction. A method is demonstrated for the use of first- and second-order differentiation of Fourier transform infrared spectra of calcium phosphates to distinguish their amorphous states from the crystalline ones based on the exact line positioning rather than on comparatively vaguer band broadening and splitting effects. The study utilizes a kinetic approach, focusing on the comparison of spectral features of amorphous precursors annealed in air at different temperatures and aged for different periods of time in an aqueous solution until transforming to one or a mixture of crystalline phases, including hydroxyapatite and α- and β-tricalcium phosphate. One of the findings challenges the concept of the nucleation lag time preceding the crystallization from amorphous precursors as a "dead" period and derives a finite degree of constructive changes occurring at the atomic scale in its course. The differential method for highlighting spectral differences depending on the sample crystallinity allows for monitoring in situ the process of conversion of the amorphous calcium phosphate phase to its crystalline analogue(s). One such method can be of practical significance for synthetic solid state chemists testing for the chemical stability and/or concentration of the reactive amorphous phase in these materials, but also for biologists measuring the maturity of bone and medical researchers evaluating its phase composition and, thus, the state of metabolic and mechanical stability.

Ultrastructure and cuticle formation of the carapace in the myodocopan ostracod exemplified by Euphilomedes japonica (Crustacea: Ostracoda)

The ultrastructure and formation of the cuticle of a myodocopan ostracod, Euphilomedes japonica, are investigated utilizing scanning and transmission electron microscopy. The outer lamella cuticle consists of four layers; epicuticle, exocuticle, endocuticle, and membranous layer like in the cuticle of other arthropods. The exocuticle and endocuticle are well-calcified and the organic matrix develops within the both cuticles. The outermost layer of new cuticle (epicuticle) is secreted first and the inner layers (exocuticle, endocuticle and membranous layer) are added proximally in the pre-, and postmoult stages. The calcification takes place in the whole area of carapace at the same time together with the synthesis of organic matrix within the endocuticle. This study demonstrates that the ultrastructure and formation of the cuticle in myodocopans are different from those in podocopans, and that the myodocopan carapaces have achieved a structural diversity for adaptation to different lifestyles.

Structures and Composition of the Crab Carapace: An Archetypal Material in Biomimetic Mechanical Design

The structures and composition of crab carapaces are of interest to biomimetic designers and materials scientists as they are hierarchically optimised to dissipate fracture energies through molecular to macroscopic length scales. At each length scale, mechanical energy is absorbed and redirected, circumventing thus catastrophic fracture through the carapace cross-section on impact. The objective of this section is to elucidate the structural, chemical and compositional makeup of crab carapaces, to provide links between their architectures and mechanical properties, and to discuss highlight papers where attempts have been made to mimic the structure-property characteristics of crab carapaces in modern engineering composites.

A Multifaceted Mass Spectrometric Method to Probe Feeding Related Neuropeptide Changes in Callinectes sapidus and Carcinus maenas

Food intake is regulated by various neuromodulators, including numerous neuropeptides. However, it remains elusive at the molecular and cellular level as to how these important chemicals regulate internal processes and which regions of the neuronal organs are responsible for regulating the behavior. Here we report a comparative neuropeptidomic analysis of the brain and pericardial organ (PO) in response to feeding in two well-studied crustacean physiology model organisms, Callinectes sapidus and Carcinus maenas, using mass spectrometry (MS) techniques. A multifaceted MS-based approach has been developed to obtain complementary information on the expression changes of a large array of neuropeptides in the brain and PO. The method employs stable isotope labeling of brain and PO extracts for relative MS quantitation, capillary electrophoresis (CE)-MS for fractionation and high-specificity analysis, and mass spectrometric imaging (MSI) for in-situ molecular mapping of peptides. A number of neuropeptides, including RFamides, B-type allatostatins (AST-B), RYamides, and orcokinins exhibit significant changes in abundance after feeding in this investigation. Peptides from the AST-B family found in PO tissue were shown to have both altered expression and localization changes after feeding, indicating that they may be a class of vital neuropeptide regulators involved in feeding behavior. Graphical Abstract ᅟ.

Transcriptome analysis on the exoskeleton formation in early developmetal stages and reconstruction scenario in growth-moulting in Litopenaeus vannamei

Exoskeleton construction is an important issue in shrimp. To better understand the molecular mechanism of exoskeleton formation, development and reconstruction, the transcriptome of the entire developmental process in Litopenaeus vannamei, including nine early developmental stages and eight adult-moulting stages, was sequenced and analysed using Illumina RNA-seq technology. A total of 117,539 unigenes were obtained, with 41.2% unigenes predicting the full-length coding sequence. Gene Ontology, Clusters of Orthologous Group (COG), the Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis and functional annotation of all unigenes gave a better understanding of the exoskeleton developmental process in L. vannamei. As a result, more than six hundred unigenes related to exoskeleton development were identified both in the early developmental stages and adult-moulting. A cascade of sequential expression events of exoskeleton-related genes were summarized, including exoskeleton formation, regulation, synthesis, degradation, mineral absorption/reabsorption, calcification and hardening. This new insight on major transcriptional events provide a deep understanding for exoskeleton formation and reconstruction in L. vannamei. In conclusion, this is the first study that characterized the integrated transcriptomic profiles cover the entire exoskeleton development from zygote to adult-moulting in a crustacean, and these findings will serve as significant references for exoskeleton developmental biology and aquaculture research.

Hard-shell mating in Neohelice granulata: the role of ecdysone in female receptivity and mate attraction

Most brachyuran females become receptive during the intermolt period, a condition considered "derived". However, as far as we know, studies testing the existence and function of pheromones in decapods are based on species which have mating linked to molting, a condition considered as "ancestral". For the first time, we studied some physiological and morphological processes involved in Neohelice granulata intermolt female crabs becoming receptive and potentially attracting males. We found that receptive females have mobile vulvae opercula due to a softening process of the cuticle hinge which showed lower calcium levels compared to the hinge of unreceptive females. Local softening of the hinge was stimulated by a low concentration of ecdysone during the intermolt period. A putative pheromone liberated by receptive females to attract males is presumed to be released through the mobile vulvae and not through the urine.

Cuticle morphogenesis in crustacean embryonic and postembryonic stages

The crustacean cuticle is a chitin-based extracellular matrix, produced in general by epidermal cells and ectodermally derived epithelial cells of the digestive tract. Cuticle morphogenesis is an integrative part of embryonic and postembryonic development and it was studied in several groups of crustaceans, but mainly with a focus on one selected aspect of morphogenesis. Early studies were focused mainly on in vivo or histological observations of embryonic or larval molt cycles and more recently, some ultrastructural studies of the cuticle differentiation during development were performed. The aim of this paper is to review data on exoskeletal and gut cuticle formation during embryonic and postembryonic development in crustaceans, obtained in different developmental stages of different species and to bring together and discuss different aspects of cuticle morphogenesis, namely data on the morphology, ultrastructure, composition, connections to muscles and molt cycles in relation to cuticle differentiation. Based on the comparative evaluation of microscopic analyses of cuticle in crustacean embryonic and postembryonic stages, common principles of cuticle morphogenesis during development are discussed. Additional studies are suggested to further clarify this topic and to connect the new knowledge to related fields.

Functional adaptation of crustacean exoskeletal elements through structural and compositional diversity: a combined experimental and theoretical study

The crustacean cuticle is a composite material that covers the whole animal and forms the continuous exoskeleton. Nano-fibers composed of chitin and protein molecules form most of the organic matrix of the cuticle that, at the macroscale, is organized in up to eight hierarchical levels. At least two of them, the exo- and endocuticle, contain a mineral phase of mainly Mg-calcite, amorphous calcium carbonate and phosphate. The high number of hierarchical levels and the compositional diversity provide a high degree of freedom for varying the physical, in particular mechanical, properties of the material. This makes the cuticle a versatile material ideally suited to form a variety of skeletal elements that are adapted to different functions and the eco-physiological strains of individual species. This review presents our recent analytical, experimental and theoretical studies on the cuticle, summarising at which hierarchical levels structure and composition are modified to achieve the required physical properties. We describe our multi-scale hierarchical modeling approach based on the results from these studies, aiming at systematically predicting the structure-composition-property relations of cuticle composites from the molecular level to the macro-scale. This modeling approach provides a tool to facilitate the development of optimized biomimetic materials within a knowledge-based design approach.

Calcium Deposits in the Crayfish, Cherax quadricarinatus: Microstructure Versus Elemental Distribution

The crayfish Cherax quadricarinatus stores calcium ions, easily mobilizable after molting, for calcifying parts of the new exoskeleton. They are chiefly stored as amorphous calcium carbonate (ACC) during each premolt in a pair of gastroliths synthesized in the stomach wall. How calcium carbonate is stabilized in the amorphous state in such a biocomposite remains speculative. The knowledge of the microstructure at the nanometer level obtained by field emission scanning electron microscopy and atomic force microscopy combined with scanning electron microscopy energy-dispersive X-ray spectroscopy, micro-Raman and X-ray absorption near edge structure spectroscopy gave relevant information on the elaboration of such an ACC-stabilized biomineral. We observed nanogranules distributed along chitin-protein fibers and the aggregation of granules in thin layers. AFM confirmed the nanolevel structure, showing granules probably surrounded by an organic layer and also revealing a second level of aggregation as described for other crystalline biominerals. Raman analyses showed the presence of ACC, amorphous calcium phosphate, and calcite. Elemental analyses confirmed the presence of elements like Fe, Na, Mg, P, and S. P and S are heterogeneously distributed. P is present in both the mineral and organic phases of gastroliths. S seems present as sulfate (probably as sulfated sugars), sulfonate, sulfite, and sulfoxide groups and, in a lesser extent, as sulfur-containing amino acids.

Formation of Helically Structured Chitin/CaCO3 Hybrids through an Approach Inspired by the Biomineralization Processes of Crustacean Cuticles

Chitin/CaCO3 hybrids with helical structures are formed through a biomineralization-inspired crystallization process under ambient conditions. Liquid-crystalline chitin whiskers are used as helically ordered templates. The liquid-crystalline structures are stabilized by acidic polymer networks which interact with the chitin templates. The crystallization of CaCO3 is conducted by soaking the templates in the colloidal suspension of amorphous CaCO3 (ACC) at room temperature. At the initial stage of crystallization, ACC particles are introduced inside the templates, and they crystallize to CaCO3 nanocrystals. The acidic polymer networks induce CaCO3 crystallization. The characterization of the resultant hybrids reveals that they possess helical order and homogeneous hybrid structures of chitin and CaCO3 , which resemble the structure and composition of the exoskeleton of crustaceans.

The Involvement of Hemocyte Prophenoloxidase in the Shell-Hardening Process of the Blue Crab, Callinectes sapidus

Cuticular structures of arthropods undergo dramatic molt-related changes from being soft to becoming hard. The shell-hardening process of decapod crustaceans includes sclerotization and mineralization. Hemocyte PPO plays a central role in melanization and sclerotization particularly in wound healing in crustaceans. However, little is known about its role in the crustacean initial shell-hardening process. The earlier findings of the aggregation of heavily granulated hemocytes beneath the hypodermis during ecdysis imply that the hemocytes may be involved in the shell-hardening process. In order to determine if hemocytes and hemocyte PPO have a role in the shell-hardening of crustaceans, a knockdown study using specific CasPPO-hemo-dsRNA was carried out with juvenile blue crabs, Callinectes sapidus. Multiple injections of CasPPO-hemo-dsRNA reduce specifically the levels of CasPPO-hemo expression by 57% and PO activity by 54% in hemocyte lysate at the postmolt, while they have no effect on the total hemocyte numbers. Immunocytochemistry and flow cytometry analysis using a specific antiserum generated against CasPPO show granulocytes, semigranulocytes and hyaline cells as the cellular sources for PPO at the postmolt. Interestingly, the type of hemocytes, as the cellular sources of PPO, varies by molt stage. The granulocytes always contain PPO throughout the molt cycle. However, semigranulocytes and hyaline cells become CasPPO immune-positive only at early premolt and postmolt, indicating that PPO expression in these cells may be involved in the shell-hardening process of C. sapidus.

CRYSTAL GROWTH. Crystallization by particle attachment in synthetic, biogenic, and geologic environments

Field and laboratory observations show that crystals commonly form by the addition and attachment of particles that range from multi-ion complexes to fully formed nanoparticles. The particles involved in these nonclassical pathways to crystallization are diverse, in contrast to classical models that consider only the addition of monomeric chemical species. We review progress toward understanding crystal growth by particle-attachment processes and show that multiple pathways result from the interplay of free-energy landscapes and reaction dynamics. Much remains unknown about the fundamental aspects, particularly the relationships between solution structure, interfacial forces, and particle motion. Developing a predictive description that connects molecular details to ensemble behavior will require revisiting long-standing interpretations of crystal formation in synthetic systems, biominerals, and patterns of mineralization in natural environments.

Effects of CO2-induced pH reduction on the exoskeleton structure and biophotonic properties of the shrimp Lysmata californica

The anticipated effects of CO₂-induced ocean acidification on marine calcifiers are generally negative, and include dissolution of calcified elements and reduced calcification rates. Such negative effects are not typical of crustaceans for which comparatively little ocean acidification research has been conducted. Crustaceans, however, depend on their calcified exoskeleton for many critical functions. Here, we conducted a short-term study on a common caridean shrimp, Lysmata californica, to determine the effect of CO₂-driven reduction in seawater pH on exoskeleton growth, structure, and mineralization and animal cryptic coloration. Shrimp exposed to ambient (7.99 ± 0.04) and reduced pH (7.53 ± 0.06) for 21 days showed no differences in exoskeleton growth (percent increase in carapace length), but the calcium weight percent of their cuticle increased significantly in reduced pH conditions, resulting in a greater Ca:Mg ratio. Cuticle thickness did not change, indicating an increase in the mineral to matrix ratio, which may have mechanical consequences for exoskeleton function. Furthermore, there was a 5-fold decrease in animal transparency, but no change in overall shrimp coloration (red). These results suggest that even short-term exposure to CO₂-induced pH reduction can significantly affect exoskeleton mineralization and shrimp biophotonics, with potential impacts on crypsis, physical defense, and predator avoidance.

Phosphate-water interplay tunes amorphous calcium carbonate metastability: spontaneous phase separation and crystallization vs stabilization viewed by solid state NMR

Organisms tune the metastability of amorphous calcium carbonates (ACC), often by incorporation of additives such as phosphate ions and water molecules, to serve diverse functions, such as modulating the availability of calcium reserves or constructing complex skeletal scaffolds. Although the effect of additive distribution on ACC was noted for several biogenic and synthetic systems, the molecular mechanisms by which additives govern ACC stability are not well understood. By precipitating ACC in the presence of different PO4(3-) concentrations and regulating the initial water content, we identify conditions yielding either kinetically locked or spontaneously transforming coprecipitates. Solid state NMR, supported by FTIR, XRD, and electron microscopy, define the interactions of phosphate and water within the initial amorphous matrix, showing that initially the coprecipitates are homogeneous molecular dispersions of structural water and phosphate in ACC, and a small fraction of P-rich phases. Monitoring the transformations of the homogeneous phase shows that PO4(3-) and waters are extracted first, and they phase separate, leading to solid-solid transformation of ACC to calcite; small part of ACC forms vaterite that subsequently converts to calcite. The simultaneous water-PO4(3-) extraction is the key for the subsequent water-mediated accumulation and crystallization of hydroxyapatite (HAp) and carbonated hydroxyapatite. The thermodynamic driving force for the transformations is calcite crystallization, yet it is gated by specific combinations of water-phosphate levels in the initial amorphous coprecipitates. The molecular details of the spontaneously transforming ACC and of the stabilized ACC modulated by phosphate and water at ambient conditions, provide insight into biogenic and biomimetic pathways.

A perspective on underlying crystal growth mechanisms in biomineralization: solution mediated growth versus nanosphere particle accretion

A working hypothesis for the understanding of amorphous-to-crystalline transformations in biogenic skeletal materials formed through transient amorphous precursor phases.

Exoskeletal cuticle differentiation during intramarsupial development of Porcellio scaber (Crustacea: Isopoda)

Exoskeletal crustacean cuticle is a calcified apical extracellular matrix of epidermal cells, illustrating the chitin-based organic scaffold for biomineralization. Studies of cuticle formation during molting reveal significant dynamics and complexity of the assembly processes, while cuticle formation during embryogenesis is poorly investigated. This study reveals in the terrestrial isopod Porcellio scaber, the ultrastructural organization of the differentiating precuticular matrices and exoskeletal cuticles during embryonic and larval intramarsupial development. The composition of the epidermal matrices was obtained by WGA lectin labelling and EDXS analysis. At least two precuticular matrices, consisting of loosely arranged material with overlying electron dense lamina, are secreted by the epidermis in the mid-stage embryo. The prehatching embryo is the earliest developmental stage with a cuticular matrix consisting of an epicuticle and a procuticle, displaying WGA binding and forming cuticular scales. In newly hatched marsupial larva manca, a new cuticle is formed and calcium sequestration in the cuticle is evident. Progression of larval development leads to the cuticle thickening, structural differentiation of cuticular layers and prominent cuticle calcification. Morphological characteristics of exoskeleton renewal in marsupial manca are described. Elaborated cuticle in marsupial larvae indicates the importance of the exoskeleton in protection and support of the larval body in the marsupium and during the release of larvae in the external environment.

Structural and dynamical studies of acid-mediated conversion in amorphous-calcium-phosphate based dental composites

OBJECTIVE

To investigate the complex structural and dynamical conversion process of the amorphous-calcium-phosphate (ACP)-to-apatite transition in ACP based dental composite materials.

METHODS

Composite disks were prepared using zirconia hybridized ACP fillers (0.4 mass fraction) and photo-activated Bis-GMA/TEGDMA resin (0.6 mass fraction). We performed an investigation of the solution-mediated ACP-to-apatite conversion mechanism in controlled acidic aqueous environment with in situ ultra-small angle X-ray scattering based coherent X-ray photon correlation spectroscopy and ex situ X-ray diffraction, as well as other complementary techniques.

RESULTS

We established that the ACP-to-apatite conversion in ACP composites is a two-step process, owing to the sensitivity to local structural changes provided by coherent X-rays. Initially, ACP undergoes a local microstructural rearrangement without losing its amorphous character. We established the catalytic role of the acid and found the time scale of this rearrangement strongly depends on the pH of the solution, which agrees with previous findings about ACP without the polymer matrix being present. In the second step, ACP is converted to an apatitic form with the crystallinity of the formed crystallites being poor. Separately, we also confirmed that in the regular Zr-modified ACP the rate of ACP conversion to hydroxyapatite is slowed significantly compared to unmodified ACP, which is beneficial for targeted slow release of functional calcium and phosphate ions from dental composite materials.

SIGNIFICANCE

For the first time, we were able to follow the complete solution-mediated transition process from ACP to apatite in this class of dental composites in a controlled aqueous environment. A two-step process, suggested previously, was conclusively identified.

Comparative ultrastructure and carbohydrate composition of gastroliths from astacidae, cambaridae and parastacidae freshwater crayfish (crustacea, decapoda)

Crustaceans have to cyclically replace their rigid exoskeleton in order to grow. Most of them harden this skeleton by a calcification process. Some decapods (land crabs, lobsters and crayfish) elaborate calcium storage structures as a reservoir of calcium ions in their stomach wall, as so-called gastroliths. For a better understanding of the cyclic elaboration of these calcium deposits, we studied the ultrastructure of gastroliths from freshwater crayfish by using a combination of microscopic and physical techniques. Because sugars are also molecules putatively involved in the elaboration process of these biomineralizations, we also determined their carbohydrate composition. This study was performed in a comparative perspective on crayfish species belonging to the infra-order Astacidea (Decapoda, Malacostraca): three species from the Astacoidea superfamily and one species from the Parastacoidea superfamily. We observed that all the gastroliths exhibit a similar dense network of protein-chitin fibers, from macro- to nanoscale, within which calcium is precipitated as amorphous calcium carbonate. Nevertheless, they are not very similar at the molecular level, notably as regards their carbohydrate composition. Besides glucosamine, the basic carbohydrate component of chitin, we evidenced the presence of other sugars, some of which are species-specific like rhamnose and galacturonic acid whereas xylose and mannose could be linked to proteoglycan components.

Correlation of structure, composition and local mechanical properties in the dorsal carapace of the edible crab Cancer pagurus

The exoskeleton of crustaceans is formed by the cuticle, a chitin-protein-based nano-composite with hierarchical organization over at least eight levels. On the molecular level, it consists of chitin associated with proteins forming fibres, which are organized in the form of twisted plywood. On the higher levels, the twisted plywood organization is modified and forms skeletal elements with elaborate functions. The load-bearing parts of crustacean cuticle are reinforced with both crystalline and amorphous biominerals. During evolution, all parts of the exoskeleton were optimized to fulfill different functions according to different ecophysiological strains faced by the animals. This is achieved by modifications in microstructure and chemical composition. In order to understand the relationship between structure, composition, mechanical properties and function we structurally characterized cuticle from the dorsal carapace of the edible crab Cancer pagurus using light and scanning electron microscopy (SEM). The local chemical composition was investigated using energy dispersive X-ray spectroscopy (EDX) and confocal m-Raman spectroscopy. Nanoindentation tests were performed to study the resulting local mechanical properties. The results show local differences in structure on several levels of the structural hierarchy in combination with a very heterogeneous mineralization. The distal exocuticle is mineralized with calcite, followed by a layer containing a magnesium, phosphate and carbonate rich phase and ACC in the proximal part. The endocuticle contains magnesian calcite and ACC in special regions below the exocuticle. Structure and mineral phase are reflected in the local stiffness and hardness of the respective cuticle regions. The heterogeneity of structural organization and mechanical properties suggests remarkable consequences for the mechanical behaviour of the bulk material.