Enhancement of ciprofloxacin sorption on chitosan/biochar hydrogel beads

Biopolymer-based beads for the adsorptive removal of organic pollutants from wastewater: Current state and future perspectives

Among biopolymer-based adsorbents, composites in the form of beads have shown promising results in terms of high adsorption capacity and ease of separation from the effluents. This review addresses the potential of biopolymer-based beads to remediate wastewaters polluted with emerging organic contaminants, for instance dyes, active pharmaceutical ingredients, pesticides, phenols, oils, polyaromatic hydrocarbons, and polychlorinated biphenyls. High adsorption capacities up to 2541.76 mg g-1 for dyes, 392 mg g-1 for pesticides and phenols, 1890.3 mg g-1 for pharmaceuticals, and 537 g g-1 for oils and organic solvents have been reported. The review also attempted to convey to its readers the significance of wastewater treatment through adsorption by providing an overview on decontamination technologies of organic water contaminants. Various preparation methods of biopolymer-based gel beads and adsorption mechanisms involved in the process of decontamination have been summarized and analyzed. Therefore, we believe there is an urge to discuss the current state of the application of biopolymer-based gel beads for the adsorption of organic pollutants from wastewater and future perspectives in this regard since it is imperative to treat wastewater before releasing into freshwater bodies.

Knowledge graph and development hotspots of biochar as an emerging aquatic antibiotic remediator: A scientometric exploration based on VOSviewer and CiteSpace

As an emerging material in the field of environmental remediation, biochar produced by carbonisation of organic solid waste has been widely used in the remediation of antibiotic wastewater due to its environmental friendliness and excellent adsorption properties. This study analyses the current literature in the field in a comprehensive and scientific manner using CiteSpace and VOSviewer technologies. Between 2011 and 2023, a total of 1162 papers were published in this domain, spanning three distinct stages: applied methods, mechanism investigation, and enhanced improvement. The results of keyword clustering indicate that the remediation of antibiotics complexed with multiple pollutants by biochar is the main research topic, followed by the remediation of antibiotics by biochar in combination with other technologies. Furthermore, drawing from current research hotspots in antibiotic remediation using biochar, this study identified the pivotal mechanisms involved: (1) The primary mechanisms by which raw biochar remediates antibiotics include π-π electron donor-acceptor interactions, hydrophobic interactions, electrostatic interactions, hydrogen-bonding, and pore filling. (2) Steam activation, acid/base, metal salt/metal oxide, and clay mineral modification can improve the physical/chemical properties of biochar, enhancing its adsorptive removal of antibiotics. (3) Biochar activated persulfate and degraded antibiotics via free radical pathways (SO4-•, •OH and O2-•) as well as non-free radical pathways (1O2 and electron transfer). In addition, the challenge and prospect of biochar engineering applications for antibiotic remediation lies in improving the main mechanism of antibiotic remediation by biochar. The prospective utilization of biochar in enhancing the remediation of antibiotic-related pollutants holds tremendous value for the future.

Preparation of mesoporous biogas residue biochar via a self-template strategy for efficient removal of ciprofloxacin: Effect of pyrolysis temperature

Biochar preparation and application is an anticipated pathway for the resource utilization of biogas residue. In this study, biochars were prepared by the pyrolysis of biogas residue from food waste anaerobic digestion (named as BRBCs) under various pyrolysis temperatures (300, 500, 700, and 900 °C), and the effect of pyrolysis temperatures on the physicochemical characteristics of BRBCs was examined. The adsorption performance toward ciprofloxacin (CIP), a typical antibiotic in waterbodies, was also investigated. The results showed that pyrolysis temperature significantly changed the physicochemical properties of BRBCs. In addition, the minerals in the biogas residue, especially SiO2, were rearranged to form a mesoporous structure in biochar through a self-template strategy (without activator). BRBC prepared at 900 °C exhibited a high specific surface area and pore volume, well-developed mesopore structure, and more carbon structure defects, and exhibited the largest CIP adsorption capacity with 70.29 mg g-1, which was ascribed to the combined interaction of pore diffusion, π-π interactions, hydrogen bonding, complexation, and electrostatic forces. Furthermore, the adsorption of CIP by BRBC900 was well described by two-compartment kinetic and Langmuir isotherm models. BRBC900 showed good adsorption performance toward CIP at pH 7-9. The adsorption of CIP by BRBC is a spontaneous, exothermic, entropy-increasing process. Moreover, BRBC also presented a good recycling potential. Therefore, the preparation of mesoporous biochar based on a self-template strategy not only provides an option for the resource utilization of biogas residue but also offers a new option for the treatment of antibiotic wastewater.

Adsorption of Ciprofloxacin on Clay Minerals in Argentinian Santa Rosa-Corrientes Soils

The presence of antibiotics in soils is increasing drastically in last decades due to the intensive farming industry and excessive human consumption. Clay minerals are one of the soil components with great adsorption capacity for organic pollutants. The study of interactions between antibiotics and mineral surfaces will give us scientific knowledge of these pollutants through soils. In this work, we study the adsorption of the antibiotic ciprofloxacin in the clay mineral fraction of soils from the Argentinian zone of Santa Rosa (Corrientes), in a collaborative research of experiments and atomistic modelling calculations of the intercalation of ciprofloxacin in the interlayer space of montmorillonite. Adsorption and desorption isotherms were performed and compared with different isotherm models. Additionally, enthalpy, entropy, and free energy were determined from equilibrium constants at a function of temperature. All these experiments and calculations lead to the conclusions that two adsorption types of ciprofloxacin are found on clay minerals: one weakly sorbed that is released during the desorption experiments, and other one strongly joined that remains in the soil.

Activation of periodate by biocarbon-supported multiple modified nanoscale iron for the degradation of bisphenol A in high-temperature aqueous solution

As reported, the persistent toxic and harmful pollutant bisphenol A (BPA) from industrial emissions has been consistently found in aquatic environments inhabited by humans. Periodate (PI)-based advanced oxidation processes (AOPs) have been employed to degrade BPA, although activating PI proves more challenging compared to other oxidants. A novel nano iron metal catalyst, sulfided nanoscale iron-nickel bimetallic nanoparticle supported on biocarbon (S-(nFe0-Ni)/BC) was synthesized and utilized to activate PI for the removal of BPA. The morphology, structure, and composition of S-(nFe0-Ni)/BC were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy-energy dispersive spectrometer (SEM-EDS), and fourier-transform infrared spectrum (FTIR). The catalyst demonstrates an excellent ability to activate PI, achieving a BPA removal efficacy of 86.4%, accompanied by a 33% reduction in total organic carbon (TOC) in the {S-(nFe0-Ni)/BC}/PI system. BPA degradation exhibited a significant change at the 5-min mark. In the first stage (0-5 min), nonlinear dynamic fitting research, combined with scavenging experiments, unveiled the competitive degradation of pollutants primarily driven by iodate radical ( IO 3 · ), singlet oxygen1 O 2 , and hydroxyl radical ( · OH ). The competitive dynamics aligned with the ExpAssoc model. The contribution rates of different active species during the second stage (5-120 min) were calculated. The contributions of main species to BPA removal follow the order of IO 3 · >1 O 2 > · OH throughout the entire process. The influence of various parameters, such as the dosage of S-(nFe0-Ni)/BC, initial PI concentration, BPA concentration, pH, temperature, and the presence of coexisting anions, was also examined. Finally, a plausible reaction mechanism in the system is proposed, suggesting that the {S-(nFe0-Ni)/BC}/PI system involves a heterogeneous synergistic reaction occurring primarily on the surface of S-(nFe0-Ni)/BC. Therefore, this study proposes a promising approach for PI-based AOPs to degrade organic pollutants, aiming to mitigate the irreversible harm caused by such pollutants to organisms and the environment.

Towards sorptive eradication of pharmaceutical micro-pollutant ciprofloxacin from aquatic environment: A comprehensive review

Antibiotics are widely prioritized pharmaceuticals frequently adopted in medication for addressing numerous ailments of humans and animals. However, the non-judicious disposal of ciprofloxacin (CIP) with concentration levels exceeding threshold limit in an aqueous environment has been the matter of growing concern nowadays. CIP is found in various waterways with appreciable mobility due to its limited decay in solidified form. Hence, the effective eradication strategy of this non-steroidal anti-inflammatory antibiotic from aqueous media is pivotal for preventing the users and the biosphere from their hazardous impacts. Reportedly several customary techniques like reverse osmosis, precipitation, cross-filtration, nano-filtration, ion exchange, microbial remediation, and adsorption have been employed to eliminate CIP from water. Out of them, adsorption is ascertained to be a potential method because of lesser preliminary investment costs, ease of operation, greater efficiency, less energy usage, reduced chemical and biological slurry production, and ready availability of precursor materials. Towards remediation of ciprofloxacin-laden water, plenty of researchers have used different adsorbents. However, the present-day challenge is opting the promising sorbent and its application towards industrial scale-up which is vital to get reviewed. In this article, adsorbents of diverse origins are reviewed in terms of their performances in CIP removal. The review stresses the impact of various factors on sorptive assimilation of CIP, adsorption kinetics, isotherms, mechanism of ionic interaction, contrivances for CIP detection, cost estimation and reusability assessments of adsorbents also that may endorse the next-generation investigators to decide the efficacious, environmental appealing and cost-competitive adsorbents for effective riddance of CIP from wastewater.

Adsorption characteristics of ciprofloxacin hydrochloride on polystyrene microplastics in freshwater

In order to reveal the adsorption mechanism of microplastics (MPs) on antibiotics, polystyrene (PS) was chosen as a typical microplastic, Fenton and high-temperature aging methods were used to obtain aged MPs particles. The adsorption behavior and mechanism of ciprofloxacin hydrochloride (CIP) on PS before and after aging were studied by batch adsorption experiments, and other influencing environmental conditions were evaluated concurrently. The results showed that the adsorption of CIP on PS was an exothermic reaction, the pseudo-second-order model and Freundlich isothermal models could fit the adsorption of CIP on PS. Aging treatment enhanced the adsorption capacity of PS to CIP, and Fenton aging for 7 days had the best effect. The highest adsorption was observed when the solution pH was 6. The adsorption capacity of microplastics gradually decreased with increasing ionic strength and the concentration of fulvic acid, while the aging microplastics changed little with the concentration of fulvic acid. The presence of both Cu (II) and CIP inhibits the adsorption of each other on microplastics. Based on the above findings, the adsorption of CIP on PS is dominated by physical adsorption, and electrostatic interactions and hydrogen bonding interactions are also important mechanisms for the adsorption of CIP on microplastics.

Chitin/calcite composite extracted from shell waste as a low-cost adsorbent for removal of tetracycline and ciprofloxacin: Effects and mechanisms

Recently, water contamination caused by the misuse of antibiotics has become a growing concern. In this study, an economical chitin/calcite composite (CCA) was extracted from crab shell waste, and the effects and mechanisms of its removal of ciprofloxacin (CIP) and tetracycline (TC) from aqueous solution were investigated. The functional groups of chitin and the metal phase of calcite gave CCA the ability to remove antibiotics. Experiments on kinetics, isothermal adsorption, thermodynamics, co-removal, and reusability were conducted to systematically explore the adsorption performances of CCA toward antibiotics. The pseudo-second-order (FSO) and Langmuir models suited the data obtained from experiments best and displayed a good fit for the chemisorption and a certain homogeneity of adsorption sites. At 25 °C, the maximum adsorption capacities (Qmax) toward CIP and TC were 228.86 and 150.76 mg g-1, respectively. The adsorption mechanisms of CCA with TC and CIP are pH dependent since pH can affect the surface charge of CCA and the form in which CIP and TC are existing. The X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) demonstrated that the keto-O and carboxyl groups of CIP and the carbonyl, hydroxyl, and amido groups of TC could be responsible for the binding with the calcite and the functional groups of chitin through surface complexation, cation bridge and hydrogen bonding.

Hyperbranched-Polyethylenimine-Functionalized Coal Fly Ash as an Adsorbent for the Removal of Hexavalent Chromium and Reuse as a Dye Photocatalyst

Coal fly ash (CFA) has been extensively researched as an adsorbent for heavy metals, but its application is limited by its low adsorption capacity. The modification of CFA with hyperbranched polymers results in improved adsorption capacities. Hyperbranched polyethylenimine (HPEI) is a hyperbranched polymer containing NH2 groups that can bind with heavy metal ions through complexation or electrostatic interactions. In this study, CFA-HPEI adsorbents with various HPEI loadings (1-5%) were prepared and evaluated for the removal of Cr(VI). The successful incorporation of HPEI onto CFA was confirmed using Fourier transform infrared, elemental analysis, and X-ray photoelectron spectroscopy (XPS). The 3% CFA-HPEI loaded adsorbent resulted in optimum results when the effect of pH and adsorbent dosage was studied. The pseudo-second-order kinetics model best described the adsorption kinetics at an initial concentration of 20 mg/L. The Freundlich adsorption isotherm model best fitted the equilibrium adsorption data with a maximum adsorption capacity of 85.93 mg/g. The Cr-loaded adsorbent was reused as a photocatalyst to degrade methylene blue (MB) in the presence of visible light. The loaded adsorbent degraded 98.9% of MB (5 mg/L) within 180 min and was accompanied by compounds with m/z of 173 and 234, corresponding to the intermediate degradation of Azure A. The XPS analysis confirmed the coexistence of Cr(III) and Cr(VI) on the surface of the adsorbent. In addition, the loaded adsorbent exhibited good stability following MB degradation with no structural changes observed. Thus, CFA-HPEI adsorbents can be utilized as low-cost adsorbents for the remediation of toxic Cr(VI) from water and wastewater. The Cr-loaded CFA-HPEI adsorbent can be effectively reused as a photocatalyst, thus reducing environmental pollution.

New-style electrokinetic-adsorption remediation of cadmium-contaminated soil using double-group electrodes coupled with chitosan-activated carbon composite membranes

Global soil cadmium (Cd(II)) contamination threatens the soil environment, food safety, and human health. Conventional electrokinetic remediation (EKR) and enhancement methods usually operate in strong electric fields, leading to strong side reactions and uneven removal. In this work, to remove Cd(II) from soil effectively in a low-voltage electric field, a new-style electrokinetic-adsorption remediation using double-group electrodes coupled with chitosan-activated carbon composite membranes (DE-EKR-CAC) was developed. Chitosan-activated carbon (CAC) composite membranes were synthesized for easy recovery and reuse of adsorbents. The effects of pH, contact time, initial concentration, and foreign ions on the removal of Cd(II) by the CAC composite membranes were determined. The CAC composite membranes performed well except in a strongly acidic environment (pH = 2.0). The soil pH varied between 3.4 and 5.0 in DE-EKR-CAC, where the CAC composite membranes were applicable. High concentrations of Ca2+ interfered with the adsorption of Cd(II), which means that the selectivity of CAC composite membranes for Cd(II) is not high enough. The Langmuir (R2 = 0.999) and pseudo-second-order kinetic (R2 = 1.0) models revealed the monolayer coverage and chemisorption mechanism, and the maximum adsorption capacity was 40.81 mg/g. Furthermore, SEM, FTIR, and XPS analyses suggest that physical adsorption, complexation of oxygen-containing functional groups, chelation of amino groups, and ion exchange are potential mechanisms for the adsorption of Cd(II) on CAC. DE-EKR-CAC performed better than the group remediated with one set of electrodes, with higher removal efficiencies and more uniform removal. The lowest energy consumption was 3.33 kWh/m3, which is lower than other enhancement methods. Separation of CAC composite membranes from soil is easy, and reuse performance is good. DE-EKR-CAC provides a potential option for Cd(II) removal from soil because of its better performance using low-voltage direct current, low energy consumption, and ease of recycling the adsorbent.

Construction of an allophane-based molecularly imprinted polymer for the efficient removal of antibiotic from aqueous solution

The widespread presence of ciprofloxacin (CIP) antibiotic in the water and soil poses substantial potential risks to the environment, threatening both human and animal health. In this study, we used nanoclay mineral allophane (Allo), β-cyclodextrin (β-CD) as a bifunctional monomer, and sodium alginate as a cross-linking agent, to prepare 3D porous Allo-β-CD molecularly imprinted polymers (MIPs) for the efficient removal of CIP from aqueous solution. The prepared Allo-β-CD MIP was characterized by scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and zeta potential measurements. The effects of initial concentration, time, pH level, and ion concentration on CIP removal dynamics were systematically studied. The adsorption kinetics and equilibrium data of CIP were well-fitted by the pseudo-second-order kinetic model and Langmuir isotherm models, respectively. The Allo-β-CD MIP can efficiently remove CIP from an aqueous solution, with a maximal adsorption capacity of 635 mg/g. It also has impressive recyclability, and enhanced selectivity, and is widely adaptable to various environmental conditions. The adsorption mechanisms of the as-prepared adsorbent include H bonds, hydrophobic interactions, surface complexation, and n-π EDA interactions. Given the experimental evidence, as-prepared adsorbent is therefore a promising candidate for the effective removal of CIP from the aquatic environment.

Ultra-sensitive detection and scavenging of arsenic ions and ciprofloxacin using 3D multipurpose hemicellulose based aerogel: Adsorption mechanism and RSM optimization

Trace level detection and efficient removal of arsenite ions (As (III)) and ciprofloxacin (CPR) antibiotic was achieved using hemicellulose based ratiometric fluorescent aerogel. Hemicellulose derived from rice straw was oxidised to dialdehyde hemicellulose followed by crosslinking using chitosan via a Schiff base reaction (C = N) yielding a highly porous 3D fluorescent aerogel (CS@DAHCA). Various factors governing adsorption were analyzed by applying response surface methodology (RSM) approach. CS@DAHCA exhibited ultra-trace level monitoring with the limit of detection of 3.529 pM and 55.2 nM for As (III) and CPR, respectively. The CS@DAHCA showed maximum adsorption capacity of 185 μg g-1 and 454 mg g-1 for As (III) and CPR, respectively. Finally, the feasibility of CS@DAHCA was ascertained for real water samples confirming it as promising candidate for remediation of As (III) and CPR.

Heterogeneous porous biochar-supported nano NiFe2O4 for efficient removal of hazardous antibiotic from pharmaceutical wastewater

Due to the dual issues of antibiotic resistance and bioaccumulation toxicity, antibiotics are ubiquitously present in aquatic environments, and this is causing serious concern. Herein, novel nickel ferrite (NiFe2O4) nanoparticles were successfully loaded onto activated biochar (BC) derived from banana peel (BP) to obtain magnetic nanocomposite (BC-NiFe2O4) as an effective biosorbent for the ciprofloxacin antibiotic (CIP) elimination from pharmaceutical effluent. A facile co-precipitation approach was utilized to construct the heterogeneous BC-NiFe2O4. The synthesized materials were systematically characterized using techniques such as XRD, FE-SEM, EDX, HR-TEM, BET, FTIR, and XPS. In addition, the magnetic measurements indicated the ferromagnetic behavior of the BC-NiFe2O4 sample. The influencing factors (i.e., pH, contact time, initial concentration, dose of adsorbent, ions interference, and solution temperature) of the adsorption process were also well studied. The adsorption capacity of the BC-NiFe2O4 heterostructure was 68.79 mg g-1 compared to the BC sample (35.71 mg g-1), confirming that the loading of magnetically NiFe2O4 nanoparticles onto the surface of porous biochar enhanced its stability and adsorption performance for CIP removal, wherein the metal-antibiotic complex has a significant effect for the removal of CIP. Moreover, the Langmuir adsorption isotherm and the pseudo-second-order model displayed a good fit for the experimental data. The values of △H° and △G° revealed that the adsorption process was endothermic and spontaneous. The coordination affinities, π-π stacking, and H-bonding interactions play a more critical role in the adsorption mechanism that confirmed by FTIR and XPS analysis. To study the stability of BC-NiFe2O4 nanocomposites, desorption and recycling studies were investigated. The results revealed that after three cycles, no significant loss in removal efficiency was detected, reflecting the stability and reusability of the prepared BC-NiFe2O4 nanocomposite.

Elimination of hazardous Se(IV) through adsorption-coupled reduction by iron nanoparticles embedded on mesopores of chitin obtained from waste shrimp shells

Selenium is an essential nutrient for biological function. However, there is a detrimental effect on the aquatic environment associated with higher concentrations of > 40 µg/L. The utilization of waste shrimp shells for the removal of high-concentrated selenium from wastewater is a commendable strategy in both the pollution control and waste management sectors. In the present study, a chitin-iron polymer complex hybrid material (Fe@SHC) was prepared from shrimp shell-derived hydrochar (SHC), and the synthesized composite was successfully employed to uptake selenium from wastewater. The highest removal performance of 79.18 mg/g was attained by Fe@SHC, whereas the capacity of SHC was 15.30 mg/g. It was found that the calcium content of Fe@SHC (1.98%) was lower than that of SHC (25.20%) and pHzpc of Fe@SHC was extended to 7.78 compared with that of SHC (2.00). The abundance of protonated hydroxyl (-OH2+) and amine (-NH3+) functional groups that developed through the iron co-precipitations resulted in the improved adsorption performance of Fe@SHC. XPS analysis demonstrated that the captured Se(IV) species were converted into less hazardous Se(0), which is accompanied by the electron transfer with both N-C = O (acetyl amine) and -NH2 (amine) functional groups. Adsorption kinetics disclosed that the adsorption process was governed by chemical sorption, and the Sips isotherm model provided the most accurate description of the isotherm equilibrium. This study proposed an inexpensive and environmentally friendly method for effective decontamination of Se from wastewater.

Synthesis and Characterization of Antibacterial Chitosan Films with Ciprofloxacin in Acidic Conditions

This work presents the results of research on obtaining chitosan (CS) films containing on their surface ciprofloxacin (CIP). A unique structure was obtained that not only gives new properties to the films, but also changes the way of coverage and structure of the surface. The spectroscopic test showed that in the process of application of CIP on the surface of CS film, CIP was converted from its crystalline form to an amorphic one, hence improving its bioavailability. This improved its scope of microbiological effect. The research was carried out on the reduction of CIP concentration during the process of CIP adhesion to the surface of chitosan films. The antibacterial activity of the CS films with and without the drug was evaluated in relation to Escherichia coli and Staphylococcus aureus, as well as Candida albicans and Penicillium expansum. Changes in the morphology and roughness of membrane surfaces after the antibacterial molecule adhesion process were tested with atomic force microscopy (AFM) and scanning electron microscopy (SEM). Structural analysis of CS and its modifications were confirmed with Fourier-transform spectroscopy in the infrared by an attenuated total reflectance of IR radiation (FTIR-ATR) and solid-state nuclear magnetic resonance (NMR).

From Waste to Resource: Valorization of Lignocellulosic Agri-Food Residues through Engineered Hydrochar and Biochar for Environmental and Clean Energy Applications-A Comprehensive Review

Agri-food residues or by-products have increased their contribution to the global tally of unsustainably generated waste. These residues, characterized by their inherent physicochemical properties and rich in lignocellulosic composition, are progressively being recognized as valuable products that align with the principles of zero waste and circular economy advocated for by different government entities. Consequently, they are utilized as raw materials in other industrial sectors, such as the notable case of environmental remediation. This review highlights the substantial potential of thermochemical valorized agri-food residues, transformed into biochar and hydrochar, as versatile adsorbents in wastewater treatment and as promising alternatives in various environmental and energy-related applications. These materials, with their enhanced properties achieved through tailored engineering techniques, offer competent solutions with cost-effective and satisfactory results in applications in various environmental contexts such as removing pollutants from wastewater or green energy generation. This sustainable approach not only addresses environmental concerns but also paves the way for a more eco-friendly and resource-efficient future, making it an exciting prospect for diverse applications.

Photocatalytic Degradation and Toxicity Analysis of Sulfamethoxazole using TiO2/BC

Sulfonamide antibiotics in the environment not only disrupt the ecological balance but can also enter the human or animal body in various forms and cause harm. Therefore, exploring efficient methods to degrade sulfonamide antibiotics is crucial. In this study, we prepared biochar (BC) using corn straw, and TiO2/BC was obtained by doping different proportions of TiO2 into biochar with varying carbonization temperatures using the sol-gel method. Next, we investigated the degradation of sulfamethoxazole (SMX) in solution using the generated TiO2/BC under ultraviolet irradiation and studied the effects of various experimental parameters, such as the type of composite material, composite material addition, solution pH, and initial antibiotic concentration on SMX degradation. Under an initial SMX concentration of 30 mg/L, the composite with the best photocatalytic degradation performance was TiO2/BC-5-300 (i.e., 5 mL of TiO2 doping; 300 °C calcination temperature), with an addition amount of 0.02 g and a solution pH of 3. The degradation efficiency increased from 22.3% to 89%, and the most significant degradation effect occurred during the initial stage of photocatalytic degradation. In the TiO2/BC-5-300 treated SMX solution, the average rhizome length of bean sprouts was significantly higher than that of the untreated SMX solution and slightly lower than that of the deionized aqueous solution (3.05 cm < 3.85 cm < 4.05 cm). This confirmed that the photocatalytic degradation of SMX by the composite was effective and could efficiently reduce its impact on the growth of bean sprouts. This study provides essential data and theoretical support for using TiO2/BC in the treatment of antibiotic-contaminated wastewater.

A novel biochar-based composite hydrogel for removing heavy metals in water and alleviating cadmium stress in tobacco seedlings

A novel composite hydrogel (AM/CMC/B) synthesized from peanut shell biochar effectively adsorbs heavy metal Cd in water and reduces its toxicity to tobacco seedlings. The hydrogel, prepared via hydrothermal polymerization using acrylamide (AM), carboxymethyl cellulose (CMC), and peanut shell biochar (B), exhibited a maximum adsorption capacity of 164.83 mg g-1 for Cd2+ and followed a pseudo-second-order kinetic model. In pot experiments, the application of exogenous AM/CMC/B mitigated the inhibitory effects of Cd-contaminated soil on tobacco seedling growth. Addition of 10 mg kg-1 Cd resulted in improved phenotype, root system development, enhanced photosynthetic capacity, stomatal conductance (Gs), stomatal number, and increased antioxidant activity while reducing MDA content and leaf cell death. These findings highlight the potential of AM/CMC/B as an environmentally friendly adsorbent for Cd removal from water and for reducing Cd stress toxicity in tobacco and other plants.

Enhanced Reactive Brilliant Blue Removal Using Chitosan-Biochar Hydrogel Beads

To address the challenges associated with the weak affinity and difficult separation of biochar, we developed chitosan-biochar hydrogel beads (CBHBs) as an efficient solution for removing reactive brilliant blue (RBB KN-R) from wastewater. The adsorption behavior and mechanism of RBB KN-R onto CBHBs were extensively studied. Notably, the adsorption capacity of RBB KN-R showed pH-dependence, and the highest adsorption capacity was observed at pH 2. The adsorption process was well fitted with the pseudo-second-order kinetic model and the intraparticle diffusion model. Film diffusion and intraparticle diffusion were both responsible for the adsorption of RBB KN-R onto CBHBs. At 298.15 K, the maximum adsorption capacity qm was determined to be 140.74 mg/g, with higher temperatures favoring the adsorption process. A complex mechanism involving π-π interactions, electrostatic attraction, hydrophobic interaction, and hydrogen bonding was found to contribute to the overall adsorption process. The experimental data discovered the coexisting substances and elevated ionic strength hindered the adsorption capacity. Significantly, after three cycles of adsorption-desorption, the CBHBs maintained an adsorption capacity above 95% for RBB KN-R. These promising results imply that CBHBs are a durable and cost-effective adsorbent for efficient removal of dyes from wastewater.

Chitosan Hydrogels for Water Purification Applications

Chitosan-based hydrogels have gained significant attention for their potential applications in water treatment and purification due to their remarkable properties such as bioavailability, biocompatibility, biodegradability, environmental friendliness, high pollutants adsorption capacity, and water adsorption capacity. This article comprehensively reviews recent advances in chitosan-based hydrogel materials for water purification applications. The synthesis methods, structural properties, and water purification performance of chitosan-based hydrogels are critically analyzed. The incorporation of various nanomaterials into chitosan-based hydrogels, such as nanoparticles, graphene, and metal-organic frameworks, has been explored to enhance their performance. The mechanisms of water purification, including adsorption, filtration, and antimicrobial activity, are also discussed in detail. The potential of chitosan-based hydrogels for the removal of pollutants, such as heavy metals, organic contaminants, and microorganisms, from water sources is highlighted. Moreover, the challenges and future perspectives of chitosan-based hydrogels in water treatment and water purification applications are also illustrated. Overall, this article provides valuable insights into the current state of the art regarding chitosan-based hydrogels for water purification applications and highlights their potential for addressing global water pollution challenges.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Bamboo-derived nitrogen-doping magnetic porous hydrochar coactivated by K2FeO4 and CaCO3 for phenol removal: Governing factors and mechanisms

In this study, a novel nitrogen-doped magnetic Fe-Ca codoped biochar for phenol removal was successfully fabricated via a hydrothermal and coactivation pyrolysis method. A series of adsorption process parameters (K₂FeO₄ to CaCO₃ ratio, initial phenol concentration, pH value, adsorption time, adsorbent dosage and ion strength) and adsorption models (kinetic models, isotherms and thermodynamic models) were determined using batch experiments and various analysis techniques (XRD, BET, SEM-EDX, Raman spectroscopy, VSM, FTIR and XPS) to investigate the adsorption mechanism and metal-nitrogen-carbon interaction. The biochar with a ratio of Biochar: K₂FeO₄: CaCO₃ = 3:1:1 exhibited superior properties for adsorption of phenol and had a maximum adsorption capacity of 211.73 mg/g at 298 K, C₀ = 200 mg/L, pH = 6.0 and t = 480 min. These excellent adsorption properties were due to superior physicomechanical properties (a large specific surface area (610.53 m²/g) and pore volume (0.3950 cm³/g), a well-developed pore structure (hierarchical), a high graphitization degree (I_D/I_G = 2.02), the presence of O/N-rich functional groups and Fe-Ox,Ca-Ox, N-doping, as well as synergistic activation by K₂FeO₄ and CaCO₃). The Freundlich and pseudo-second-order models effectively fit the adsorption data, indicating multilayer physicochemical adsorption. Pore filling and π-π interactions were the predominant mechanisms for phenol removal, and H-bonding interactions, Lewis-acid-base interactions, and metal complexation played an important role in enhancing phenol removal. A simple, feasible approach with application potential to organic contaminant/pollutant removal was developed in this study.

3D ZnO/Activated Carbon Alginate Beads for the Removal of Antibiotic-Resistant Bacteria and Antibiotic Resistance Genes

The worldwide prevalence of antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) have become one of the most urgent issues for public health. Thus, it is critical to explore more sustainable methods with less toxicity for the long-term removal of both ARB and ARGs. In this study, we fabricated a novel material by encapsulating zinc oxide (ZnO) nanoflowers and activated carbon (AC) in an alginate biopolymer. When the dosage of ZnO was 1.0 g (≈2 g/L), the composite beads exhibited higher removal efficiency and a slight release of Zn²⁺ in water treatment. Fixed bed column experiments demonstrated that ZnO/AC alginate beads had excellent removal capacities. When the flow rate was 1 mL/min, and the initial concentration was 10⁷ CFU/mL, the removal efficiency of ARB was 5.69-log, and the absolute abundance of ARGs was decreased by 2.44-2.74-log. Moreover, the mechanism demonstrated that ZnO significantly caused cell lysis, cytoplasmic leakage, and the increase of reactive oxygen species induced subsequent oxidative stress state. These findings suggested that ZnO/AC alginate beads can be a promising material for removing ARB and ARGs from wastewater with eco-friendly and sustainable properties.

Environmental Applications of 3D g-C3N4-Based Hydrogel with Synergistic Effect of Adsorption and Photodegradation

In this paper, g-C₃N₄-based hydrogel with a 3D network structure was synthesized via a simple and cheap reaction, using hydroxyethyl cellulose (HEC) and graphitic carbon nitride (g-C₃N₄) as the main materials. Electron microscope images revealed that the microstructure of g-C₃N₄-HEC hydrogel was rough and porous. The luxuriant scaly textures of this hydrogel were due to the uniform distribution of g-C₃N₄ nanoparticles. It was found that this hydrogel showed great removal ability of bisphenol A (BPA) through a synergistic effect of adsorption and photodegradation. The adsorption capacity and degradation efficiency of g-C₃N₄-HEC hydrogel (3%) for BPA were 8.66 mg/g and 78% under the conditions of C₀ = 9.94 mg/L and pH = 7.0, which were much higher than those for the original g-C₃N₄ and HEC hydrogel. In addition, g-C₃N₄-HEC hydrogel (3%) exhibited excellent removal efficiency (98%) of BPA (C₀ = 9.94 mg/L) in a dynamic adsorption and photodegradation system. Meanwhile, the mechanism of removal was investigated in depth. The superior batch and continuous removal capability of this g-C₃N₄-based hydrogel make it promising for environmental applications.

Adsorptive removal of anionic azo dye by Al3+-modified magnetic biochar obtained from low pyrolysis temperatures of chitosan

Magnetic γ-Fe₂O₃/Al³⁺@chitosan-derived biochar (m-Fe₂O₃/Al³⁺@CB) was prepared by introducing magnetic maghemite (γ-Fe₂O₃) nanoparticles and aluminum sulfate [Al₂(SO₄)₃] into chitosan-derived biochar (CB) obtained at low pyrolysis temperatures. m-Fe₂O₃/Al³⁺@CB was used to remove typical anionic azo dye (Congo red, CR). Effects of initial CR concentration, contact time, initial pH value, background electrolytes, and temperature on CR adsorption by m-Fe₂O₃/Al³⁺@CB were studied. Compared with magnetic chitosan-derived biochar (m-Fe₂O₃@CB), m-Fe₂O₃/Al³⁺@CB exhibited excellent performance for a wider range of pH values (pH 1-7) and in the presence of background electrolyte. The introduction of Al³⁺ is an effective method for improving the properties of magnetic chitosan-derived biochar. High CR adsorption capacity (636.94 mg g^-1) of m-Fe₂O₃/Al³⁺@CB could result from collaborative effect of flocculation/coagulation and electrostatic attraction. These results demonstrated that m-Fe₂O₃/Al³⁺@CB is a potential adsorbent for effective removal of organic dyes from aqueous solution due to its high adsorption capacity and convenient magnetic recovery and stronger anti-interference ability against coexisting anions in wastewater.

A novel BC/g-C3N4 porous hydrogel carrier used in intimately coupled photocatalysis and biodegradation system for efficient removal of tetracycline hydrochloride in water

Intimately coupled photocatalysis and biodegradation (ICPB) is a promising technology to remove refractory contaminants from water. The key to successful ICPB is a carrier capable of accumulating biofilm and adhering photocatalyst firmly. Herein, BC/g-C₃N₄ was prepared into a three dimensional porous hydrogel and used as a carrier in ICPB system for the first time. Degradation experiments revealed that the removal rate of tetracycline hydrochloride (TCH) in water by the ICPB system was 96.0% after 10 h, which was significantly higher than that by the photocatalysis (PC, 76.3%), biodegradation (B, 32.5%), adsorption (AD, 17.2%), and photolysis (P, 5.0%) systems. Photo-electrochemical tests confirmed that ICPB system had superior electron transfer ability between photocatalysts and microorganisms. The removal efficiency of COD proved that microorganisms played an important role in the mineralization process of TCH by the ICPB system. After the ICPB degradation experiment, microorganisms maintained high activity and Pseudomonas, Burkholderiaceae and Flavobacterium which had TCH degradation or electron transport ability, were enriched. In conclusion, the novel ICPB carrier overcame shortcomings of the traditional ICPB carrier and the novel ICPB system had superior degradation performance for TCH. This study provided a possible method to promote the practical application of ICPB technology.

A review of antibiotics and antibiotic resistance genes (ARGs) adsorption by biochar and modified biochar in water

Antibiotics have been used in massive quantities for human and animal medical treatment, and antibiotic resistance genes (ARGs) are of great concern worldwide. Antibiotics and ARGs are exposed to the natural environment through the discharge of medical wastewater, causing great harm to the environment and human health. Biochar has been widely used as a green and efficient adsorbent to remove pollutants. However, pristine and unmodified biochars are not considered sufficient and efficient to cope with the current serious water pollution. Therefore, researchers have chosen to improve the adsorption capacity of biochar through different modification methods. To have a better understanding of the application of modified biochar, this review summarizes the biochar modification methods and their performance, particularly, molecular imprinting and biochar aging are outlined as new modification methods, influencing factors of biochar and modified biochar in adsorption of antibiotics and ARGs and adsorption mechanisms, wherein adsorption mechanism of ARGs on biochar is found to be different than that of antibiotics. After that, the directions of biochar and modified biochar worthy of research and the issues that need attention are proposed. It can be noted that under the current dual carbon policy, biochar may have wider application prospects in future.

Sodium humate based double network hydrogel for Cu and Pb removal

Sodium humate (SH) is one of the derivatives humic substances, which can be utilized for heavy metal removal from water due to its containing plenty of functional groups. In this study, a double network hydrogel SH/polyacrylamide (SH/PAM) was synthesized by a simple free-radical polymerization and used for Cu²⁺ and Pb²⁺ removal from water. The adsorption process can be well described by Langmuir-Freundlich model, indicating that both physical and chemical adsorption were involved. X-ray photoelectron spectroscopy (XPS) characterization demonstrated that complexation was the main mechanism for the adsorption. Two-dimensional correlation analysis of FTIR (2D-FTIR-COS) results showed that the variation order of functional groups during Cu²⁺ and Pb²⁺ adsorption in the following order: COOH ≈ -CO > -OH > C-O and -COOH ≈ C-O > -CO > -OH, respectively. According to the density functional theory (DFT) calculation results, the O atom of SH in the COO^- was the main adsorption site. Meanwhile, the adsorption energy of Pb²⁺ was more negative than that of Cu²⁺ and the orbital hybridization between O atom of SH and Pb²⁺ was denser than that of Cu²⁺, which suggested that SH/PAM had a stronger combining capacity for Pb²⁺ than Cu²⁺. Therefore, the adsorption capacity for Pb²⁺ was larger than Cu²⁺. Moreover, the removal efficiencies are 30.2% for Al, 98.79% for Cu, 99.0% for Fe, 17.2% for Mn, 93.4% for Pb, and 62.4% for Zn in actual acid mine drainage using 6 g L^-1 adsorbent. Collectively, this study not only provided a new adsorbent for heavy metal removal but also explicated the mechanism of heavy metal removal by SH from molecule and electron perspective, which is helpful for the application of SH in the environmental field.

Simultaneous adsorptive removal of three fluoroquinolones using humic acid modified hydrogel beads

This study elaborates the simultaneous removal of three different fluoroquinolones (FQs), i.e., Norfloxacin (NOR), Lomefloxacin (LOM), and Enrofloxacin (ENR) from water using hydrogel beads of humic acid coated biochar (HA-BC) and chitosan. In our previous study, this adsorbent has already achieved tremendous results for the removal of a single FQ, i.e., ciprofloxacin. Now, initial concentrations of all FQs were set 100 mg/L each, and the maximum adsorbed amounts were 38.08 mg/g (NOR), 25.03 mg/g (LOM), and 29.72 mg/g (ENR). Adsorption attained equilibrium after 24 h, which obeyed the pseudo-second-order kinetic model. The mutation of humic acid-biochar/chitosan hydrogel beads (HBCB) with alcoholic solvents, i.e., methanol and ethanol to replace water decreased its sorption capacities from 38.08 mg/g (NOR) to 34.91 mg/g and 32.19 mg/g, respectively. Similarly, from 25.03 mg/g (LOM) to 22.81 mg/g and 19.91 mg/g, and 29.72 mg/g (ENR) to 26.52 mg/g and 24.64 mg/g. Adsorption isotherm data for all FQs were up to both Langmuir and Freundlich, but it suited more to that of Langmuir adsorption isotherm model. Sorption capacities, for all FQs, had a minor decline due to addition of NaCl, NaNO₃, and Na₂SO₄. However, there was a huge decline when Na₃PO₄ was added into the adsorption system. Adsorbent was desorbed and regenerated for consecutive removal, and it showed good adsorption in the 4^th cycle, i.e., 47 mg/g net adsorption. These results prove that HBCB is not only effective for adsorption removal of ciprofloxacin but also for other FQs too.

An achieved strategy for magnetic biochar for removal of tetracyclines and fluoroquinolones: Adsorption and mechanism studies

In this study, poplar wood biochar modified with Fe₃O₄ (MPBC) was prepared using poplar wood as carbon source applied to remove tetracyclines and fluoroquinolones. The adsorption behavior was investigated by batch experiments, and a series of characterization techniques were used to study the corresponding mechanism. Characterizations indicated that pore filling, electrostatic interactions, π-π interaction, surface complexation, and hydrogen bond contributed to the adsorption of antibiotics on MPBC. Most importantly, the thermodynamic experiment results showed that the adsorption capacity of MPBC for tetracyclines (70.28-89.58 mg⋅g^-1) was significantly higher than fluoroquinolones (35.54-60.31 mg⋅g^-1), which was further explained by hydrogen bond interactions calculated from Conductor-like screening model for real solvents (COSMO-RS). In addition, the adsorption between MPBC and antibiotics was favorable at lower ionic strengths and neutral conditions. Conclusively, this study could provide a promising approach to controlling the pollution of tetracyclines and fluoroquinolones.

Enhanced Cr(VI) bioreduction by biochar: Insight into the persistent free radicals mediated extracellular electron transfer

Biochar can act as a shuttle to accelerate the extracellular electron transfer (EET) by exoelectrogens. However, it is poorly understood how the persistent free radicals (PFRs) in biochar affected EET and the redox reaction. Herein, the effects of the biochar and chitosan modified biochar (CBC) on the Cr(VI) bioreduction by Shewanella oneidensis MR-1 (MR-1) was investigated. Kinetic study indicated that the Cr(VI) bioreduction rate constant by MR-1 was increased by 1.8-33.7 folds in the presence of biochar, and by 2.7-60.2 folds in the presence of CBC, respectively. Moreover, Cr(VI) bioreduction rates increased with the decreasing pH. Results suggested that the electrostatic attraction between Cr(VI) and redox-active particles could accelerate the EET by c-cytochrome due to the promotion of the Cr(VI) migration from aqueous phase to biochar or CBC. Electron paramagnetic resonance analysis suggested that the PFRs affected the electron transfer from the ·O₂^- generated by MR-1 to Cr(VI) and accelerate the Cr(VI) bioreduction. Remarkably, in the presence of PFRs, this electron shuttling process was dependent on the non-metal-reducing respiratory pathway. Our results offer new insights that free radicals may be widely involved in the EET and strongly impact on the redox reaction in the environment.

Enhanced Visible-Light-Responsive Photocatalytic Degradation of Ciprofloxacin by the CuxO/Metal-Organic Framework Hybrid Nanocomposite

Ciprofloxacin (CIP) is a commonly used antibiotic, however, once in the environment, it is highly toxic with a poor biodegradability. Given these attributes, an effective strategy for the removal of CIP is urgently needed for the protection of water resources. Herein, a novel copper metal-organic framework (CuxO/MOF) multifunctional material has been produced, in this work, by the calcination of Cu-MOF urea at 300 °C, in the presence of a 5% H2 atmosphere. The morphological, structural, and thermal properties of the prepared CuxO/MOF were determined through various techniques, and its photocatalytic behavior was investigated for the degradation of CIP under visible-light irradiation. The prepared CuxO/MOF bifunctional material is presented as a graphitic carbon-layered structure with a particle size of 9.2 ± 2.1 nm. The existence of CuO-Cu2O-C, which was found on the CuxO/MOF surface, enhanced the adsorption efficiency and increased the photosensitivity of CuxO/MOF, towards the degradation of CIP in aqueous solutions. The tailored CuxO/MOF, not only shows an excellent CIP degradation efficiency of up to 92% with a constant kinetic rate (kobs) of 0.048 min−1 under visible light, but it can also retain the stable photodegradation efficiency of >85%, for at least six cycles. In addition, CuxO/MOF has an excellent adsorption capacity at pH 6.0 of the maximum Langmuir adsorption capacity of 34.5 mg g−1 for CIP. The results obtained in this study demonstrate that CuxO/MOF is a reliable integrated material and serves as an adsorbent and photocatalyst, which can open a new pathway for the preparation of visible-light-responsive photocatalysts, for the removal of antibiotics and other emerging pollutants.

Modified biochar/humic substance/fertiliser compound soil conditioner for highly efficient improvement of soil fertility and heavy metals remediation in acidic soils

Fertile and uncontaminated soil with appropriate pH is crucial in terms of the agricultural sustainable development. Herein, a compound soil conditioner containing chitosan modified straw biochar (CBC), kitchen waste compost product-derived humic substance (HS), NPK compound fertiliser (NPK-CF) was prepared to simultaneously adjust acidic soil pH, improve fertility, and immobilize heavy metal. The results exhibited that the best Pb and NH₄⁺ adsorption performance was obtained in CBC with chitosan:biochar of 1:5. Then, the acid soil pH was improved from 5.03 to 6.66 in the presence of CBC/HS (5:5) with 3% addition weight (the mass ratio of conditioner to soil). Meanwhile, compared with the control, the contents of organic matter, available nitrogen, and available phosphorus significantly increased by 52.4%, 92.6%, and 136.3%, respectively. Moreover, Pb was highly efficient immobilised by CBC, and the concentration of Pb in the soil was decreased by 55.2%. The optimal growth trend of ryegrass was obtained in the presence of 3% addition weight (the mass ratio of conditioner to soil) CBC/HS (CBC:HS = 5:5) combined with 60% of the recommended NPK-CF application weight, which was mainly contributed by the improvement of the soil microbial abundance and community structure diversity. The addition of CBC/HS could effectively reduce the addition of NPK-CF and contribute to simultaneous controlling nitrogen loss, releasing phosphorus, immobilising Pb, adjusting pH, improving soil quality and controlling nonpoint pollution.

Explanation of difenoconazole removal by chitosan with Langmuir adsorption isotherm and kinetic modeling

In this study, the adsorption of toxic difenoconazole pesticide was investigated by using chitosan. In the first phase of the study, chitosan was extracted from deep-water pink shrimp (Parapenaeus longirostris) shells, by deacetylation of the chitin, which is separated and disposed of after meat extraction in processing facilities in Turkey. The deacetylation degree, molecular weight, viscosity, moisture, and crude-ash values of the extracted chitosan were determined. Chitosan, having a high deacetylation degree (90.21%), was used as the adsorbent. In the second phase of the study, the effects of pH, temperature, and pesticide concentration on the adsorption were investigated. The optimum pH level for pesticide adsorption was determined as 5. It was observed that the adsorption increases as the temperature increases. A rapid increase was observed within the first 5 min of the 60-minute adsorption process in difenoconazole concentrations of 5, 15, and 25 µg/L, and after 10 min, the adsorption rate was stable. The Langmuir isotherm parameters regarding the adsorption were determined as aL = 0.635, kL = 15.10, and the Qmax value was calculated as 23.77 mg/g. In the evaluation of overall study results, it was determined that the chitosan biopolymer is a suitable adsorbent for difenoconazole pesticide adsorption.

A study on the adsorption property and mechanism of β-cyclodextrin/polyvinyl alcohol/polyacrylic acid hydrogel for ciprofloxacin

Polyvinyl alcohol (PVA), acrylic acid (AA), and β-cyclodextrin (β-CD) were used as monomers, and ammonium persulfate was used as an initiator. Orthogonal tests were optimized the experimental condition, and aqueous polymerization was used to prepare poly-β-cyclodextrin/polyvinyl alcohol/polyacrylic acid (β-CD/PVA/PAA) hydrogel. The samples were characterized by FT-IR (Fourier transform infrared), SEM (Scanning electron microscopy), and XRD (X-ray diffraction). β-CD/PVA/PAA hydrogel was analyzed, which influenced external environmental factors on the β-CD/PVA/PAA hydrogel adsorption performance, and the kinetic behavior of β-CD/PVA/PAA hydrogel on ciprofloxacin (CIP) adsorption was explored. The results concluded that the prepared β-CD/PVA/PAA hydrogel has a well-defined three-dimensional network structure. The decrease in the pH of the CIP solution and the adsorption temperature reduces the adsorption reaction of β-CD/PVA/PAA hydrogel on CIP. The kinetics of CIP adsorption by β-CD/PVA/PAA hydrogel confirmed the pseudo-second-order kinetic model (R 2 > 0.997), the maximum equilibrium adsorption amounts is 372.12 mg/g, the removal rate reaches 74.42%. The adsorption process was mainly chemisorption, the adsorption isotherm fits the Freundlich adsorption isotherm model (R 2 > 0.946), and the adsorption process was heterogeneous with multi-molecular layer adsorption. The adsorption process inclined more toward the adsorption of inhomogeneous multi-molecular layers. The β-CD/PVA/PAA hydrogel retained 80% adsorption properties after three adsorption-desorption under optimal conditions.

Activated carbon-chitosan based adsorbent for the efficient removal of the emerging contaminant diclofenac: Synthesis, characterization and phytotoxicity studies

The rise in pharmaceutical pollutants due to their unregulated discharge in pharmaceutical wastewater has landed them as emerging contaminants that would gradually affect the aquatic ecosystem and human life. The current study emphasizes the adsorptive elimination of one such emerging pharmaceutical pollutant, i.e., Diclofenac (DIF), using a synthesized adsorbent vis. Activated carbon-chitosan beads (ACCB). The morphological and physicochemical properties of the prepared adsorbent, ACCB and its interaction with the DIF species were investigated. Process parameters influencing the adsorptive interactions between ACCB and DIF were optimised. DIF was efficiently adsorbed at optimised initial DIF pH of 6.0 and ACCB dosage of 1.5 mg/mL at an incubation temperature of 40 °C. Freundlich isotherm model showed the best fit (R² = 0.98) with the experimental data to conclude that the adsorbent surface is heterogenous, promoting multilayer adsorption. As depicted from the Langmuir isotherm model, the maximum theoretical adsorption capacity was 99.29 mg/g. The seed toxicity assay confirmed the efficacy of ACCB in the adsorptive removal of DIF species from aqueous setups, making the post-treated solution fit enough for seed germination.

Graphene oxide modified κ-carrageenan/sodium alginate double-network hydrogel for effective adsorption of antibiotics in a batch and fixed-bed column system

The treatment of antibiotic wastewater pollution is imminent, the studies of double-network hydrogels as adsorbents have gradually increased, it is quite important to develop a non-toxic hydrogel with excellent properties as adsorbent. In this study, a graphene oxide modified κ-carrageenan/sodium alginate (GO-κ-car/SA) gel was prepared by calcium hardening. The addition of GO nanosheets enhances the mechanical strength and anti-swelling property of the double-network hydrogel, making it possible for the application in the fixed-bed column system. The elastic modulus is twice as much as the hydrogel without GO. The maximum adsorption capacity in the experiments of the GO-κ-car/SA gel for CIP and OFL can reach 272.18 mg g^-1 and 197.39 mg g^-1, respectively. The GO-κ-car/SA gel always remains negatively charged, which means that the adsorption capacity of the gel is better in an acidic environment. In the fixed-bed column system, through Thomas fitting, the maximum adsorption capacity of the simulated OFL wastewater (200 mg L^-1) is 83.99 mg g^-1. The adsorption mechanism of antibiotics by GO-κ-car/SA gel depends on hydrogen bond, functional groups and electrostatic adsorption. The good hydrophilic properties, excellent adsorption capacity and high mechanical strength, which can ensure that the adsorbent is in full contact with the contaminants without major deformation or damage, makes the study more helpful for the further study on hydrogel in the fixed-bed column system.

Chitosan-Modified Biochar and Unmodified Biochar for Methyl Orange: Adsorption Characteristics and Mechanism Exploration

In this study, shrimp shell-derived chitosan (CS) and rice husk-derived biochar (RHB) were produced; CS and RHB were then used to synthesize chitosan-modified biochar (CSBC) hydrogel beads. N₂ adsorption (77K), SEM-EDX and FT-IR techniques were used to evaluate the physicochemical properties of the adsorbents. A batch experiment was conducted to test the methyl orange (MO) adsorption performance of RHB and CSBC. The results showed that the MO adsorption process was strongly pH-dependent. The kinetics were well described by the pseudo-second-order and intra-particle diffusion models, assuming the chemisorption and intraparticle diffusion mechanisms govern the adsorption process. Homogeneous adsorption for MO on the surface of RHB and CSBC was also assumed since the isotherm data showed the best-fit to the Langmuir model. Under the experimental conditions of initial pH 3, dosage 0.2 g, contact time 240 min and temperature 298 K, the maximum adsorption capacity of CSBC and RHB for MO dye adsorption was 38.75 mg.g^-1 and 31.63 mg.g^-1, respectively. This result demonstrated that biochar had better performance after modification with chitosan, which provided more functional groups (i.e., -NH₂ and -OH groups) for enhanced electrostatic interactions and complexation between MO and CSBC. Overall, CSBC is an effective adsorbent for the removal of MO from aqueous solution.

Antibiotic bioremediation by new generation biochar: Recent updates

The evolving multidrug resistance in microbes with increasing antibiotic pollution is becoming a severe global crisis. Recent developments on antibiotic remediations by biochar are promising. Advancements in biochar engineering enhanced biochar remediation efficiency to another level through developing new interactions and bonding abilities with antibiotic pollutants. Especially chemical/metal-composite modification significantly increased catalysis of biochar. The review's main focus is to underline biochar efficiency for the abatement of emerging antibiotic pollutants. Moreover, to relate feedstock, production conditions, and engineering techniques with biochar properties. Also, modification strategies are reviewed to obtain biochar or their composites before examining improved remediation potential ranging from 20 to 552 mg g^-1 for various antibiotics. Biochar offers different interactions depending on the surface functionalities e.g., π-π stacking, electrostatic, H-bonding, etc. Biochar and related composites have also been reviewed for remarkable properties e.g., photocatalysis, adsorption, and oxidation processes. Furthermore, future research directions and opportunities for biochar research are discussed.

Enhanced Ciprofloxacin Removal from Aqueous Solution Using a Chemically Modified Biochar Derived from Bamboo Sawdust: Adsorption Process Optimization with Response Surface Methodology

Contamination of water by ciprofloxacin has become a significant concern due to its adverse health effects and growing evidence of antimicrobial-resistant gene evolution. To this end, a chemically modified bamboo biochar was prepared from bamboo sawdust to effectively remove ciprofloxacin (CIP) from an aqueous solution. Under similar adsorption conditions, the modified bamboo biochar (MBC) has an excellent CIP removal efficiency (96%) compared to unmodified bamboo biochar (UBC) efficiency (45%). Thus, MBC was used in batch adsorption experiments, and the process was optimized with the central composite design (CCD) framework of response surface methodology (RSM). Sorption process parameters such as initial CIP concentration, pH, adsorbent dose, and contact time were studied and found to have a significant effect on CIP removal. The optimal CIP removal (96%) was obtained at MBC dose (0.5 g L-1), CIP initial concentration (20 mg L-1), pH (7.5), and contact time (46 min). The adsorption kinetic data were well described by the pseudo-second-order model ( $R^2=0.999$ ), and both Langmuir ( $R^2=0.994$ ) and Freundlich ( $R^2=0.972$ ) models gave the best fit in CIP adsorption isotherm analysis. The maximum monolayer adsorption capacity of the MBC was 78.43 mg g-1 based on the Langmuir isotherm model. These results suggest that CIP adsorption was mainly controlled by chemisorption. Moreover, the CIP adsorption process was endothermic and spontaneous. Overall, MBC is a low-cost, efficient, and recyclable adsorbent for eliminating emerging contaminants such as ciprofloxacin from an aqueous solution.

Thin Films (FTO/BaTiO3/AgNPs) for Enhanced Piezo-Photocatalytic Degradation of Methylene Blue and Ciprofloxacin in Wastewater

In this study, we investigate the ability of barium titanate/silver nanoparticles (BaTiO₃/AgNPs) composites deposited on a fluorine-doped tin oxide (FTO) glass using tape-casting method to produce piezoelectric thin film (FTO/BaTiO₃/AgNPs) for piezocatalytic, photocatalytic, and piezo-photocatalytic degradation of methylene blue (MB) and ciprofloxacin (CIP) in wastewater. The prepared piezoelectric materials (BaTiO₃ and BaTiO₃/AgNPs) were characterized using XRD, SEM, TEM, EDS, UV-DRS, TGA, PL, BET, EIS, and chronoamperometry. The UV-DRS showed the surface plasmon resonance (SPR) of Ag nanoparticles on the surface of BaTiO₃ at a wavelength of 505 nm. The TEM images revealed the average Ag nanoparticle size deposited on the surface of BaTiO₃ to be in the range of 10-15 nm. The chronoamperometry showed that the photoreduction of silver nanoparticles (AgNPs) onto BaTiO₃ (BTO) resulted in a piezo-electrochemical current enhancement from 0.24 to 0.38 mA. The composites (FTO/BaTiO₃/AgNPs) achieved a higher degradation of MB and CIP when the photocatalysis and piezocatalysis processes were merged. Under both ultrasonic vibration and UV light exposure, FTO/BTO/AgNPs degraded about 72 and 98% of CIP and MB from wastewater, respectively. These piezoelectric thin films were shown to be efficient and reusable even after five cycles, suggesting that they are highly stable. Furthermore, the reactive oxygen species studies demonstrated that hydroxyl radicals (·OH) were the most effective species during degradation of MB, with minor superoxide radicals (·O₂ ^-) and holes (h⁺). From this study, we were able to show that these materials can be used as multifunctional materials as they were able to degrade both the dye and pharmaceutical pollutants. Moreover, they were more efficient through the piezo-photocatalytic process.

Sonocatalytic degradation of ciprofloxacin using hydrogel beads of TiO2 incorporated biochar and chitosan

Pharmaceuticals are necessary to be removed from environment. Herein TiO₂ incorporated biochar made from pyrolysis of agricultural wastes was encapsulated into chitosan to obtain a novel hydrogel beads. This hydrogel beads executed a dual role as both adsorbent and sonocatalyst, which proved to be suitable for the removal of antibiotic ciprofloxacin (CIP) from water. The results showed that adsorption of CIP followed pseudo first order kinetics model and Langmuir adsorption isotherm model, having maximum adsorption at pH 9. Whereas the degradation was more efficient at pH 6 due to greater standard potential for ^•OH/H₂O in acidic media. The degradation was maximum at 150 W of ultrasonic power, then decreased in presence of dissimilar electrolytes and even reduced to 0 in presence of Na₃PO₄. Different quenchers such as benzoquinone (BQ), Triethanolamine (TEA) and isopropyl alcohol (IPA) reduced degradation efficiency (DE) and mineralization efficiency (ME). The DE was decreased from 85.23% to 81.50% (BQ), 74.27% (TEA), and 61.77% (IPA) within 25 min. The prepared sonocatalyst was capable of regeneration with DE, remaining sufficiently high (62%) even after four regeneration steps. These results indicate that titanium-biochar/chitosan hydrogel beads (TBCB) are durable and effective for long-term CIP removal.

Designing of pretreatment filter technique for reduction of phenolic constituents from olive-mill wastewater and testing its impact on wheat germination

Olive oil extraction produces a great volume of olive mill wastewater (OMW), which is considered a serious ecological challenge. In this study, we have designed and tested a trickling filter consisting of seven different layers of natural material, including (coarse gravel, fine gravel, lime (Ca (OH)₂), sand (SiO₂), carbon char, sponge/mesh), to treat OMW. The filter process involved physical separation, filtration, coagulation and adsorption with the removal of COD (69.8%), BOD (40.2%), Phenolic contents (90%), pH (41%), EC (41.6%) and total suspended solids (TSS) (69%). Our results have shown that treated OMW has a high potential oxidant activity. T7, Untreated OMW at 1:6 dilutions, had the strongest correlation (i.e. 0.97), while untreated OMW had the lowest IC50 (7.62 g ml^-1), which shown the best DPPH radical scavenging capabilities. While pure Untreated OMW has the maximum radical scavenging activity, 63%, treated (1:6) diluted OMW exhibits the lowest value i. e 9% when phosphomolybdate assay was done. HPLC analysis showed that the trickling filter removed the vanillic acid, caffeic acid and reduced the contents of phenolic components such as gallic acid, hydroxytyrosol, vanillin, quercetin and catechol. Filtered OMW was also tested for its germination efficacy at various dilutions (1:0, 1:2, 1:4, 1:6). A remarkable improvement in germination percentage, germination index, seedling length, seedling vigor index, promptness index, stress tolerance index (76.7%, 68.4%, 51.7%, 82.1%, 54.8%, and 66.7%, respectively) has shown the efficiency of treated OMW at 1:6 dilutions. The results from this study show the efficiency of our filter design which can be further used.

New nanostructured activated biochar for effective removal of antibiotic ciprofloxacin from wastewater: Adsorption dynamics and mechanisms

Developing green inexpensive and effective adsorbents is critically needed for elimination of antibiotics from contaminated water. The current study assessed the nanostructured activated biochar (nPPAB) derived from pomegranate peels (PP) as a promising sorbent for efficient removal of the antibiotic ciprofloxacin (CIP). The results affirm that the second order and Langmuir models fit well to adsorption kinetics and equilibrium data respectively. The nPPAB adsorption capacity of Langmuir (q_max) for CIP was 142.86 mg g^-1 which is 26.85 times greater than that of bulk PP. Hydrogen bonding, π-π interaction, hydrophobic and electrostatic interactions are the dominant mechanisms of CIP adsorption by nPPAB. The efficiency of nPPAB for CIP removal from real wastewater using batch and packed-bed reactor were 89.94 and 84.74% respectively. This study clearly demonstrated the substantial capacity of nPPAB as an ecofriendly, feasible, and in-expensive adsorbent for successful elimination of CIP from wastewater.

Efficient remediation of antibiotic pollutants from the environment by innovative biochar: current updates and prospects

The increased antibiotic consumption and their improper management led to serious antibiotic pollution and its exposure to the environment develops multidrug resistance in microbes against antibiotics. The entry rate of antibiotics to the environment is much higher than its exclusion; therefore, efficient removal is a high priority to reduce the harmful impact of antibiotics on human health and the environment. Recent developments in cost-effective and efficient biochar preparation are noticeable for their effective removal. Moreover, biochar engineering advancements enhanced biochar remediation performance several folds more than in its pristine forms. Biochar engineering provides several new interactions and bonding abilities with antibiotic pollutants to increase remediation efficiency. Especially heteroatoms-doping significantly increased catalysis of biochar. The main focus of this review is to underline the crucial role of biochar in the abatement of emerging antibiotic pollutants. A detailed analysis of both native and engineered biochar is provided in this article for antibiotic remediation. There has also been discussion of how biochar properties relate to feedstock, production conditions and manufacturing technologies, and engineering techniques. It is possible to produce biochar with different surface functionalities by varying the feedstock or by modifying the pristine biochar with different chemicals and preparing composites. Subsequently, the interaction of biochar with antibiotic pollutants was compared and reviewed. Depending on the surface functionalities of biochar, they offer different types of interactions e.g., π-π stacking, electrostatic, and H-bonding to adsorb on the biochar surface. This review demonstrates how biochar and related composites have optimized for maximum removal performance by regulating key parameters. Furthermore, future research directions and opportunities for biochar research are discussed.