Redefining near-unity luminescence in quantum dots with photothermal threshold quantum yield

Colossal Core/Shell CdSe/CdS Quantum Dot Emitters

Single-photon sources are essential for advancing quantum technologies with scalable integration being a crucial requirement. To date, deterministic positioning of single-photon sources in large-scale photonic structures remains a challenge. In this context, colloidal quantum dots (QDs), particularly core/shell configurations, are attractive due to their solution processability. However, traditional QDs are typically small, about 3 to 6 nm, which restricts their deterministic placement and utility in large-scale photonic devices, particularly within optical cavities. The largest existing core/shell QDs are a family of giant CdSe/CdS QDs, with total diameters ranging from about 20 to 50 nm. Pushing beyond this size limit, we introduce a synthesis strategy for colossal CdSe/CdS QDs, with sizes ranging from 30 to 100 nm, using a stepwise high-temperature continuous injection method. Electron microscopy reveals a consistent hexagonal diamond morphology composed of 12 semipolar {101̅1} facets and one polar (0001) facet. We also identify conditions where shell growth is disrupted, leading to defects, islands, and mechanical instability, which suggest synthetic requirements for growing crystalline particles beyond 100 nm. The stepwise growth of thick CdS shells on CdSe cores enables the synthesis of emissive QDs with long photoluminescence lifetimes of a few microseconds and suppressed blinking at room temperature. Notably, QDs with 80 and 100 CdS monolayers exhibit high single-photon emission purity with second-order photon correlation g(2)(0) values below 0.2.

Coherent Erbium Spin Defects in Colloidal Nanocrystal Hosts

We demonstrate nearly a microsecond of spin coherence in Er3+ ions doped in cerium dioxide nanocrystal hosts, despite a large gyromagnetic ratio and nanometric proximity of the spin defect to the nanocrystal surface. The long spin coherence is enabled by reducing the dopant density below the instantaneous diffusion limit in a nuclear spin-free host material, reaching the limit of a single erbium spin defect per nanocrystal. We observe a large Orbach energy in a highly symmetric cubic site, further protecting the coherence in a qubit that would otherwise rapidly decohere. Spatially correlated electron spectroscopy measurements reveal the presence of Ce3+ at the nanocrystal surface, which likely acts as extraneous paramagnetic spin noise. Even with these factors, defect-embedded nanocrystal hosts show tremendous promise for quantum sensing and quantum communication applications, with multiple avenues, including core-shell fabrication, redox tuning of oxygen vacancies, and organic surfactant modification, available to further enhance their spin coherence and functionality in the future.

A high temperature in situ optical probe for colloidal nanocrystal synthesis

We report on the fabrication and utilization of a robust high-temperature (>300 °C), adjustable-path-length, vacuum-tolerant, configurable, in situ optical probe, which interfaces with widely used chemical glassware via a 14/20 ground glass joint. This probe allows for high-speed reaction monitoring of colloidal semiconductor nanocrystal solutions at temperatures that were previously inaccessible. We demonstrate this capability by monitoring the hot-injection synthesis of CdSe quantum dots via UV-Vis absorption spectroscopy at 380 °C with a time resolution of ∼10 ms, with the primary limitation being the acquisition and data saving rate of the commercial spectrometer used. We further demonstrate that this probe can also be used for in situ photoluminescence measurements. This system is generally applicable to harsh solution environments where optical monitoring of reaction progress is desirable and/or necessary.

The 2023 Nobel Prize in Chemistry: Quantum dots

The 2023 Nobel Prize in Chemistry was awarded to Aleksey I. Ekimov (prize share 1/3), Louis E. Brus (prize share 1/3), and Moungi G. Bawendi (prize share 1/3) for groundbreaking inventions in the field of nanotechnology, i.e., for the discovery and synthesis of semiconductor nanocrystals, also termed quantum dots, that exhibit size-dependent physicochemical properties enabled by quantum size effects. This feature article summarizes the main milestones of the discoveries and developments of quantum dots that paved the road to their versatile applications in solid-state lighting, display technology, energy conversion, medical diagnostics, bioimaging, and image-guided surgery.

Observation of negative surface and interface energies of quantum dots

Surface energy is a fundamental property of materials and is particularly important in describing nanomaterials where atoms or molecules at the surface constitute a large fraction of the material. Traditionally, surface energy is considered to be a positive quantity, where atoms or molecules at the surface are less thermodynamically stable than their counterparts in the interior of the material because they have fewer bonds or interactions at the surface. Using calorimetric methods, we show that the surface energy is negative in some prototypical colloidal semiconductor nanocrystals, or quantum dots with organic ligand coatings. This implies that the surface atoms are more thermodynamically stable than those on the interior due to the strong bonds between these atoms and surfactant molecules, or ligands, that coat their surface. In addition, we extend this work to core/shell indium phosphide/zinc sulfide nanocrystals and show that the interfacial energy between these materials is highly thermodynamically favorable in spite of their large lattice mismatch. This work challenges many of the assumptions that have guided thinking about colloidal nanomaterial thermodynamics, investigates the fundamental stability of many technologically relevant colloidal nanomaterials, and paves the way for future experimental and theoretical work on nanocrystal thermodynamics.

Disorder and Halide Distributions in Cesium Lead Halide Nanocrystals as Seen by Colloidal 133Cs Nuclear Magnetic Resonance Spectroscopy

Colloidal nuclear magnetic resonance (cNMR) spectroscopy on inorganic cesium lead halide nanocrystals (CsPbX3 NCs) is found to serve for noninvasive characterization and quantification of disorder within these structurally soft and labile particles. In particular, we show that 133Cs cNMR is highly responsive to size variations from 3 to 11 nm or to altering the capping ligands on the surfaces of CsPbX3 NCs. Distinct 133Cs signals are attributed to the surface and core NC regions. Increased heterogeneous broadening of 133Cs signals, observed for smaller NCs as well as for long-chain zwitterionic capping ligands (phosphocholines, phosphoethanol(propanol)amine, and sulfobetaines), can be attributed to more significant surface disorder and multifaceted surfaces (truncated cubes). On the contrary, capping with dimethyldidodecylammonium bromide (DDAB) successfully reduces signal broadening owing to better surface passivation and sharper (001)-bound cuboid shape. DFT calculations on various sizes of NCs corroborate the notion that the surface disorder propagates over several octahedral layers. 133Cs NMR is a sensitive probe for studying halide gradients in mixed Br/Cl NCs, indicating bromide-rich surfaces and chloride-rich cores. On the contrary, mixed Br/I NCs exhibit homogeneous halide distributions.

Enhancement of Optical Gain in Colloidal CdSe/CdS/ZnS Quantum Dots through Nanosecond Optical Pumping

Optical gain and lasing in colloidal nanocrystals are often hindered by sub-nanosecond rapid Auger non-radiative recombination, especially under continuous wave optical or electrical excitation. This study demonstrates amplified spontaneous emission (ASE) from CdSe/CdS/ZnS quantum dot (QD) solids through prolonged pulsed optical pumping over 10 ns. The incorporation of CdS and ZnS double shells on CdSe QDs effectively decelerates the Auger process in multiexcitonic states by extending the electron wave function and enhancing dielectric screening. Furthermore, we engineer smooth, densely packed QD solid films that efficiently guide the optical mode, achieving substantial net gain values under nanosecond pumping. The proposed approach helps observe ASE with gain thresholds of 0.84 and 1.5 mJ/cm2 under optical pumping pulse widths of 6 and 15 ns, respectively. This advancement can promote continuous pumping in colloidal QD gain systems, opening new avenues for optoelectronic applications.

Role of Charge-Carrier Dynamics Toward the Fabrication of Efficient Air-Processed Organic Solar Cells

Over the past couple of decades, immense research has been carried out to understand the photo-physics of an organic solar cell (OSC) that is important to enhance its efficiency and stability. Since OSCs undergoes complex photophysical phenomenon, studying these factors has led to designing new materials and implementing new strategies to improve efficiency in OSCs. In this regard, the invention of the non-fullerene acceptorshas greatly revolutionized the understanding of the fundamental processes occurring in OSCs. However, such vital fundamental research from device physics perspectives is carried out on glovebox (GB) processed OSCs and there is a scarcity of research on air-processed (AP) OSCs. This review will focus on charge carrier dynamics such as exciton diffusion, exciton dissociation, charge-transfer states, significance of highest occupied molecular orbital-offsets, and hole-transfer efficiencies of GB-OSCs and compare them with the available data from the AP-OSCs. Finally, key requirements for the fabrication of efficient AP-OSCs will be presented from a charge-carrier dynamics perspective. The key aspects from the charge-carrier dynamics view to fabricate efficient OSCs either from GB or air are provided.

Synthesis of Ternary and Quaternary Group III-Arsenide Colloidal Quantum Dots via High-Temperature Cation Exchange in Molten Salts: The Importance of Molten Salt Speciation

Colloidal semiconductor nanocrystals are an important class of materials which have many desirable optoelectronic properties. In their bulk phases, gallium- and aluminum-containing III-V materials such as GaAs, GaP, and Al1-xGaxAs represent some of the most technologically important semiconductors. However, their colloidal synthesis by traditional methods is difficult due to the high temperatures needed to crystallize these highly covalent materials and the extreme reactivity of Ga- and Al- precursors toward organic solvents at such high temperatures. A recently developed paradigm shift in the synthesis of these materials is to use molten inorganic salts as solvents to prepare Ga- containing III-V colloidal nanocrystals by cation exchange of the corresponding indium pnictide (InPn) colloidal nanocrystals. There have been several successful applications of molten salt solvents to prepare III-phosphide colloidal nanocrystals. However, little is known about the nature of these reaction environments at the relevant reaction conditions and synthesis of III-arsenide colloidal nanocrystals remains challenging. Herein we report a detailed study on cation exchange of InPn nanocrystals using nominally Lewis basic molten salt solvents with added gallium halides. Surprisingly, these salt systems phase separate into two immiscible phases, and the nanocrystals preferentially segregate to one of the phases. Using a suite of in situ spectroscopy tools, we identify the phase the nanocrystals segregate to as Lewis neutral alkali tetrahalogallate molten salts. We apply in situ high-temperature Raman spectroscopy to identify the chemical species present in several molten salt compositions at experimentally relevant reaction conditions to elucidate a molecular basis for the reactivity observed. We then employ Lewis neutral KGaI4 molten salts to prepare high-quality In1-xGaxAs and In1-xGaxP nanocrystals and demonstrate that deviation from Lewis neutral conditions accelerate nanocrystal decomposition in the case of III-arsenide materials. Further, we expand to KAlI4-based molten salts to prepare In1-x-yGaxAlyAs nanocrystals which represent an example of solution-synthesized quaternary III-V nanocrystals. These insights provide a molecular basis for the rational development of molten salt solvents, thus allowing the preparation of a diverse array of multicomponent III-V colloidal nanocrystals.

Impact of Surface Trap States on Electron and Energy Transfer in CdSe Quantum Dots Studied by Femtosecond Transient Absorption Spectroscopy

The presence of surface trap states (STSs) is one of the key factors to affect the electronic and optical properties of quantum dots (QDs), however, the exact mechanism of how STSs influence QDs remains unclear. Herein, we demonstrated the impact of STSs on electron transfer in CdSe QDs and triplet-triplet energy transfer (TTET) from CdSe to surface acceptor using femtosecond transient absorption spectroscopy. Three types of colloidal CdSe QDs, each containing various degrees of STSs as evidenced by photoluminescence and X-ray photoelectron spectroscopy, were employed. Time-resolved emission and transient absorption spectra revealed that STSs can suppress band-edge emission effectively, resulting in a remarkable decrease in the lifetime of photoelectrons in QDs from 17.1 ns to 4.9 ns. Moreover, the investigation of TTET process revealed that STSs can suppress the generation of triplet exciton and effectively inhibit band-edge emission, leading to a significant decrease in TTET from CdSe QDs to the surface acceptor. This work presented evidence for STSs influence in shaping the optoelectronic properties of QDs, making it a valuable point of reference for understanding and manipulating STSs in diverse QDs-based optoelectronic applications involving electron and energy transfer.

Polaritonic Bottleneck in Colloidal Quantum Dots

Controlling the relaxation dynamics of excitons is key to improving the efficiencies of semiconductor-based applications. Confined semiconductor nanocrystals (NCs) offer additional handles to control the properties of excitons, for example, by changing their size or shape, resulting in a mismatch between excitonic gaps and phonon frequencies. This has led to the hypothesis of a significant slowing-down of exciton relaxation in strongly confined NCs, but in practice due to increasing exciton-phonon coupling and rapid multiphonon relaxation channels, the exciton relaxation depends only weakly on the size or shape. Here, we focus on elucidating the nonradiative relaxation of excitons in NCs placed in an optical cavity. We find that multiphonon emission of carrier governs the decay, resulting in a polariton-induced phonon bottleneck with relaxation time scales that are slower by orders of magnitude compared to the cavity-free case, while the photon fraction plays a secondary role.

A composite electrodynamic mechanism to reconcile spatiotemporally resolved exciton transport in quantum dot superlattices

Quantum dot (QD) solids are promising optoelectronic materials; further advancing their device functionality requires understanding their energy transport mechanisms. The commonly invoked near-field Förster resonance energy transfer (FRET) theory often underestimates the exciton hopping rate in QD solids, yet no consensus exists on the underlying cause. In response, we use time-resolved ultrafast stimulated emission depletion (STED) microscopy, an ultrafast transformation of STED to spatiotemporally resolve exciton diffusion in tellurium-doped cadmium selenide-core/cadmium sulfide-shell QD superlattices. We measure the concomitant time-resolved exciton energy decay due to excitons sampling a heterogeneous energetic landscape within the superlattice. The heterogeneity is quantified by single-particle emission spectroscopy. This powerful multimodal set of observables provides sufficient constraints on a kinetic Monte Carlo simulation of exciton transport to elucidate a composite transport mechanism that includes both near-field FRET and previously neglected far-field emission/reabsorption contributions. Uncovering this mechanism offers a much-needed unified framework in which to characterize transport in QD solids and additional principles for device design.

Cation Exchange and Spontaneous Crystal Repair Resulting in Ultrathin, Planar CdS Nanosheets

Cation exchange has become a major postsynthetic tool to obtain nanocrystals with a combination of stoichiometry, size, and shape that is challenging to achieve by direct wet-chemical synthesis. Here, we report on the transformation of highly anisotropic, ultrathin, and planar PbS nanosheets into CdS nanosheets of the same dimensions. We monitor the evolution of the Cd-for-Pb exchange by ex-situ TEM, HAADF-STEM, and EDX. We observe that in the early stages of the exchange the sheets show large in-sheet voids that repair spontaneously upon further exchange and annealing, resulting in ultrathin, planar, and crystalline CdS nanosheets. After cation exchange, the nanosheets show broad sub-band gap luminescence, as often observed in CdS nanocrystals. The photoluminescence excitation spectrum reveals the heavy- and light-hole exciton features, with very strong quantum confinement and large electron-hole Coulomb energy, typical for 2D ultrathin Cd-chalcogenide nanosheets.

Quantum shells versus quantum dots: suppressing Auger recombination in colloidal semiconductors

Colloidal semiconductor nanocrystals (NCs) have attracted a great deal of attention in recent decades. The quantum efficiency of many optoelectronic processes based on these nanomaterials, however, declines with increasing optical or electrical excitation intensity. This issue is caused by Auger recombination of multiple excitons, which converts the NC energy into excess heat, whereby reducing the efficiency and lifespan of NC-based devices, including lasers, photodetectors, X-ray scintillators, and high-brightness LEDs. Recently, semiconductor quantum shells (QSs) have emerged as a viable nanoscale architecture for the suppression of Auger decay. The spherical-shell geometry of these nanostructures leads to a significant reduction of Auger decay rates, while exhibiting a near unity photoluminescence quantum yield. Here, we compare the optoelectronic properties of quantum shells against other low-dimensional semiconductors and discuss their emerging opportunities in solid-state lighting and energy-harvesting applications.

Direct Optical Patterning of Quantum Dots: One Strategy, Different Chemical Processes

Patterning, stability, and dispersion of the semiconductor quantum dots (scQDs) are three issues strictly interconnected for successful device manufacturing. Recently, several authors adopted direct optical patterning (DOP) as a step forward in photolithography to position the scQDs in a selected area. However, the chemistry behind the stability, dispersion, and patterning has to be carefully integrated to obtain a functional commercial device. This review describes different chemical strategies suitable to stabilize the scQDs both at a single level and as an ensemble. Special attention is paid to those strategies compatible with direct optical patterning (DOP). With the same purpose, the scQDs' dispersion in a matrix was described in terms of the scQD surface ligands' interactions with the matrix itself. The chemical processes behind the DOP are illustrated and discussed for five different approaches, all together considering stability, dispersion, and the patterning itself of the scQDs.

Design Rules for Obtaining Narrow Luminescence from Semiconductors Made in Solution

Solution-processed semiconductors are in demand for present and next-generation optoelectronic technologies ranging from displays to quantum light sources because of their scalability and ease of integration into devices with diverse form factors. One of the central requirements for semiconductors used in these applications is a narrow photoluminescence (PL) line width. Narrow emission line widths are needed to ensure both color and single-photon purity, raising the question of what design rules are needed to obtain narrow emission from semiconductors made in solution. In this review, we first examine the requirements for colloidal emitters for a variety of applications including light-emitting diodes, photodetectors, lasers, and quantum information science. Next, we will delve into the sources of spectral broadening, including "homogeneous" broadening from dynamical broadening mechanisms in single-particle spectra, heterogeneous broadening from static structural differences in ensemble spectra, and spectral diffusion. Then, we compare the current state of the art in terms of emission line width for a variety of colloidal materials including II-VI quantum dots (QDs) and nanoplatelets, III-V QDs, alloyed QDs, metal-halide perovskites including nanocrystals and 2D structures, doped nanocrystals, and, finally, as a point of comparison, organic molecules. We end with some conclusions and connections, including an outline of promising paths forward.

Biexciton Blinking in CdSe-Based Quantum Dots

Experiments on single colloidal quantum dots (QDs) have revealed temporal fluctuations in the emission efficiency of the single-exciton state. These fluctuations, often termed "blinking", are caused by opening/closing of charge-carrier traps and/or charging/discharging of the QD. In the regime of strong optical excitation, multiexciton states are formed. The emission efficiencies of multiexcitons are lower because of Auger processes, but a quantitative characterization is challenging. Here, we quantify fluctuations of the biexciton efficiency for single CdSe/CdS/ZnS core-shell QDs. We find that the biexciton efficiency "blinks" significantly. The additional electron due to charging of a QD accelerates Auger recombination by a factor of 2 compared to the neutral biexciton, while opening/closing of a charge-carrier trap leads to an increase of the nonradiative recombination rate by a factor of 4. To understand the fast rate of trap-assisted recombination, we propose a revised model for trap-assisted recombination based on reversible trapping. Finally, we discuss the implications of biexciton blinking for lasing applications.

Quantum dots are time bomb: Multiscale toxicological study

The use of quantum dots has spread widely into many applications. Works on the study of quantum dots on living organisms have had conflicting results on toxicity. There are no full-scale long-term toxicological studies with multiple administration of quantum dots. Understanding the toxicity of quantum dots is still limited. Here we present data on the effects of quantum dots on animals. In this work for the first time, it is shown that at a single administration of quantum dots in the body they have moderate species-specific toxicity, but repeated administration of quantum dots for 14 days even in the amount of 0.5 mg/kg leads to a delayed not completely irreversible hematotoxic effect, delayed irreversible disorders of barrier function of the liver, irreversible nephrotoxic effect, and to pathological changes in the thymus, kidneys and spleen. Administration of quantum dots in the amount of 2.5 mg/kg for 14 days leads to irreversible changes in the lungs, liver, spleen, kidneys and thyroid gland. This phenomenon is based on immunological reactions. On the one hand, these data confirm that quantum dots at a single administration can show relatively low toxicity. On the other hand, they cause to a delayed irreversible organ and tissue damage when repeatedly administered to the body even in small quantities. This study demonstrates that quantum dots are not as low in toxicity as previously thought to be and pose a serious risk when entering living organisms. Detecting and treating poisoning using standard methods of diagnosis and treatment of heavy metal poisoning may not be effective. This study demonstrates that toxic effects of quantum dots on a living body are quite complex and cannot be generalized based on previously reported assumptions.

Excitation Intensity-Dependent Quantum Yield of Semiconductor Nanocrystals

One of the key phenomena that determine the fluorescence of nanocrystals is the nonradiative Auger-Meitner recombination of excitons. This nonradiative rate affects the nanocrystals' fluorescence intensity, excited state lifetime, and quantum yield. Whereas most of the above properties can be directly measured, the quantum yield is the most difficult to assess. Here we place semiconductor nanocrystals inside a tunable plasmonic nanocavity with subwavelength spacing and modulate their radiative de-excitation rate by changing the cavity size. This allows us to determine absolute values of their fluorescence quantum yield under specific excitation conditions. Moreover, as expected considering the enhanced Auger-Meitner rate for higher multiple excited states, increasing the excitation rate reduces the quantum yield of the nanocrystals.

Quantum Dot-Peptide Conjugates as Energy Transfer Probes for Sensing the Proteolytic Activity of Matrix Metalloproteinase-14

We detail the assembly and characterization of quantum dot (QD)-dye conjugates constructed using a peptide bridge specifically designed to recognize and interact with a breast cancer biomarker─matrix metalloproteinase-14 (MMP-14). The assembled QD conjugates are then used as optically addressable probes, relying on Förster resonance energy transfer (FRET) interactions as a transduction mechanism to detect the activity of MMP-14 in solution phase. The QDs were first coated with dithiolane poly(ethylene glycol) (PEG) bearing a carboxyl group that allows coupling via amide bond formation with different dye-labeled peptides. The analytical capability of the conjugates is enabled by correlating changes in the FRET efficiency with the conjugate valence and/or QD-to-dye separation distance, triggered and modulated by enzymatic proteolysis of surface-tethered peptides. The FRET probe exhibits great sensitivity to enzyme digestion with sub-nanomolar limit of detection. We further analyze the proteolysis data within the framework of the Michaelis-Menten model, which considers the fact that surface-attached peptides have a slower diffusion coefficient than free peptides. This results in reduced collision frequency and lower catalytic efficiency, k_cat/K_M. Our results suggest that our conjugate design is promising, effective, and potentially useful for in vivo analysis.

Ultra-precise photothermal measurements reveal near unity photoluminescence quantum yields of molecular emitters in solution

Molecules with a photoluminescence quantum yield (PLQY) approaching unity enable new applications such as efficient luminescent solar concentrators and spectral redistributors. Moreover, they have the potential for thermally assisted photon upconversion and optical refrigeration, for which the slightest amount of non-radiative loss is detrimental. However, when the PLQY is within a few percent of 100%, it cannot be precisely determined using standard techniques. Here, we combine spectroscopic measurements with photothermal techniques to determine the photothermal threshold energy, i.e. the minimum photon energy at which the chromophores produce heat upon excitation. The PLQY is directly related to this energy and is determined for six fluorescent molecules in low concentration solutions with an unprecedented precision down to ±0.003 within 95% confidence intervals. Independent measurements based on photothermal-deflection spectroscopy and thermal lensing spectroscopy generally provide values within the margin of error, demonstrating the reliability of this measurement concept. Solutions of perylene red in carbon tetrachloride are found to have the highest PLQY of the measured series, being 0.994 ± 0.003. In addition, we observe phonon-assisted, optical upconversion when exciting perylene red within its optical gap at photon energies below its photothermal threshold. Similar measurements on perylene orange in chloroform reveal the presence of low energy sub-gap impurities, preventing upconversion when exciting at the photothermal threshold.

Frequency Stabilization and Optically Tunable Lasing in Colloidal Quantum Dot Superparticles

Self-assembled superparticles composed of colloidal quantum dots establish microsphere cavities that support optically pumped lasing from whispering gallery modes. Here, we report on the time- and excitation fluence-dependent lasing properties of CdSe/CdS quantum dot superparticles. Spectra collected under constant photoexcitation reveal that the lasing modes are not temporally stable but instead blue-shift by more than 30 meV over 15 min. To counter this effect, we establish a high-fluence light-soaking protocol that reduces this blue-shift by more than an order of magnitude to 1.7 ± 0.5 meV, with champion superparticles displaying mode blue-shifts of <0.5 meV. Increasing the pump fluence allows for optically controlled, reversible, color-tunable red-to-green lasing. Combining these two paradigms suggests that quantum dot superparticles could serve in applications as low-cost, robust, solution-processable, tunable microlasers.

Deterministic Quantum Light Arrays from Giant Silica-Shelled Quantum Dots

Colloidal quantum dots (QDs) are promising candidates for single-photon sources with applications in photonic quantum information technologies. Developing practical photonic quantum devices with colloidal materials, however, requires scalable deterministic placement of stable single QD emitters. In this work, we describe a method to exploit QD size to facilitate deterministic positioning of single QDs into large arrays while maintaining their photostability and single-photon emission properties. CdSe/CdS core/shell QDs were encapsulated in silica to both increase their physical size without perturbing their quantum-confined emission and enhance their photostability. These giant QDs were then precisely positioned into ordered arrays using template-assisted self-assembly with a 75% yield for single QDs. We show that the QDs before and after assembly exhibit antibunching behavior at room temperature and their optical properties are retained after an extended period of time. Together, this bottom-up synthetic approach via silica shelling and the robust template-assisted self-assembly offer a unique strategy to produce scalable quantum photonics platforms using colloidal QDs as single-photon emitters.

The Coming of Age of Neodymium: Redefining Its Role in Rare Earth Doped Nanoparticles

Among luminescent nanostructures actively investigated in the last couple of decades, rare earth (RE³⁺) doped nanoparticles (RENPs) are some of the most reported family of materials. The development of RENPs in the biomedical framework is quickly making its transition to the ∼800 nm excitation pathway, beneficial for both in vitro and in vivo applications to eliminate heating and facilitate higher penetration in tissues. Therefore, reports and investigations on RENPs containing the neodymium ion (Nd³⁺) greatly increased in number as the focus on ∼800 nm radiation absorbing Nd³⁺ ion gained traction. In this review, we cover the basics behind the RE³⁺ luminescence, the most successful Nd³⁺-RENP architectures, and highlight application areas. Nd³⁺-RENPs, particularly Nd³⁺-sensitized RENPs, have been scrutinized by considering the division between their upconversion and downshifting emissions. Aside from their distinctive optical properties, significant attention is paid to the diverse applications of Nd³⁺-RENPs, notwithstanding the pitfalls that are still to be addressed. Overall, we aim to provide a comprehensive overview on Nd³⁺-RENPs, discussing their developmental and applicative successes as well as challenges. We also assess future research pathways and foreseeable obstacles ahead, in a field, which we believe will continue witnessing an effervescent progress in the years to come.

Charging and Charged Species in Quantum Dot Light-Emitting Diodes

Despite recent rapid advances in improving quantum dot light-emitting diodes, many fundamental aspects of the device operating mechanism remain unresolved. Through transient electroluminescence and time-resolved photoluminescence measurements, the effects of offset voltage on charging and charge transport are examined. First, capacitive charging occurs with a time constant of ∼500 ns, followed by electron transport through quantum dots with a mobility of ∼10^-5 cm² V^-1 s^-1. Hole injection then initiates an electroluminescence rise that is independent of offset voltage. The photoluminescence lifetime is also unaffected by the offset voltage, indicating no injection of charges into the quantum dots or on their surfaces prior to the voltage pulse. A slower equilibration to steady-state electroluminescence is dependent on the offset voltage, indicative of another charging process. Elemental mapping shows that ZnO deposition from solution can lead to the diffusion of charged species into the quantum dot layer, which may cause the slower process.

Nanoparticle dynamics in hydrogel networks with controlled defects

The effect of nanoscale defects on nanoparticle dynamics in defective tetra-poly(ethylene glycol) (tetra-PEG) hydrogels is investigated using single particle tracking. In a swollen nearly homogeneous hydrogel, PEG-functionalized quantum dot (QD) probes with a similar hydrodynamic diameter (d_h = 15.1 nm) to the mesh size (〈ξ_s〉 = 16.3 nm), are primarily immobile. As defects are introduced to the network by reaction-tuning, both the percentage of mobile QDs and the size of displacements increase as the number and size of the defects increase with hydrolysis time, although a large portion of the QDs remain immobile. To probe the effect of nanoparticle size on dynamics in defective networks, the transport of d_h = 47.1 nm fluorescent polystyrene (PS) and d_h = 9.6 nm PEG-functionalized QDs is investigated. The PS nanoparticles are immobile in all hydrogels, even in highly defective networks with an open structure. Conversely, the smaller QDs are more sensitive to perturbations in the network structure with an increased percentage of mobile particles and larger diffusion coefficients compared to the larger QDs and PS nanoparticles. The differences in nanoparticle mobility as a function of size suggests that particles of different sizes probe different length scales of the defects, indicating that metrics such as the confinement ratio alone cannot predict bulk dynamics in these systems. This study provides insight into designing hydrogels with controlled transport properties, with particular importance for degradable hydrogels for drug delivery applications.

Facet-selective etching trajectories of individual semiconductor nanocrystals

The size and shape of semiconductor nanocrystals govern their optical and electronic properties. Liquid cell transmission electron microscopy (LCTEM) is an emerging tool that can directly visualize nanoscale chemical transformations and therefore inform the precise synthesis of nanostructures with desired functions. However, it remains difficult to controllably investigate the reactions of semiconductor nanocrystals with LCTEM, because of the highly reactive environment formed by radiolysis of liquid. Here, we harness the radiolysis processes and report the single-particle etching trajectories of prototypical semiconductor nanomaterials with well-defined crystalline facets. Lead selenide nanocubes represent an isotropic structure that retains the cubic shape during etching via a layer-by-layer mechanism. The anisotropic arrow-shaped cadmium selenide nanorods have polar facets terminated by either cadmium or selenium atoms, and the transformation trajectory is driven by etching the selenium-terminated facets. LCTEM trajectories reveal how nanoscale shape transformations of semiconductors are governed by the reactivity of specific facets in liquid environments.

Amorphous silicon carbide high contrast gratings as highly efficient spectrally selective visible reflectors

We report spectrally selective visible wavelength reflectors using hydrogenated amorphous silicon carbide (a-SiC:H) as a high index contrast material. Beyond 610nm and through the near infrared spectrum, a-SiC:H exhibits very low loss and exhibits an wavelength averaged index of refraction of n = 3.1. Here we design, fabricate, and characterize such visible reflectors using a hexagonal array of a-SiC:H nanopillars as wavelength-selective mirrors with a stop-band of approximately 40 nm full-width at half maximum. The fabricated high contrast grating exhibits reflectivity R >94% at a resonance wavelength of 642nm with a single layer of a-SiC:H nanopillars. The resonance wavelength is tunable by adjusting the geometrical parameters of the a-SiC:H nanopillar array, and we observe a stop-band spectral center shift from 635 nm up to 642 nm. High contrast gratings formed from a-SiC:H nanopillars are a promising platform for various visible wavelength nanophotonics applications.

Coherent InP/ZnS core@shell quantum dots with narrow-band green emissions

We report, for the first time, that the coherent growth of zinc sulfide (ZnS) on a colloidal indium phosphide (InP) quantum dot (QD) yields a InP/ZnS core/shell structure with a single lattice constant of 0.563 nm. Compared to the bulk crystal of zinc-blend (cubic) InP, the lattice of the core QD is compressed by 4.1%. In contrast, the lattice of the shell expands by 4.1% relative to the bulky ZnS crystal throughout the core/shell QD if the shell is thinner than or equal to 0.81 nm and the diameter of the core QD is smaller than 2.64 nm. Under these conditions, the bandgap of the core QD increases, resulting in a blueshift of absorption and photoluminescence (PL) spectra. The PL peak is centered at 523 nm. Furthermore, the PL quantum yield is enhanced up to 70% and the PL bandwidth narrows to 36 nm based on the strengthened quantum confinement effect. The temperature dependence of the PL properties is investigated to discuss the effect of the core/shell lattice coherency on the improved PL performances.

Perovskite Quantum Dots for Emerging Displays: Recent Progress and Perspectives

The excellent luminescence properties of perovskite quantum dots (PQDs), including wide excitation wavelength range, adjustable emission wavelength, narrow full width at half maximum (FWHM), and high photoluminescence quantum yield (PLQY), highly match the application requirements in emerging displays. Starting from the fundamental structure and the related optical properties, this paper first introduces the existing synthesis approaches of PQDs that have been and will potentially be used for display devices, and then summarizes the stability improving approaches with high retention of PQDs' optical performance. Based on the above, the recent research progress of PQDs in displays is further elaborated. For photoluminescent display applications, the PQDs can be embedded in the backlighting device or color filter for liquid crystal displays (LCD), or they may function as the color conversion layer for blue organic light-emitting diodes (OLED) and blue micro-scale light-emitting diodes (μLED). In terms of next-generation electroluminescent displays, notable progress in perovskite quantum-dot light emitting diodes (PeQLED) has been achieved within the past decade, especially the maximum external quantum efficiency (EQE). To conclude, the key directions for future PQD development are summarized for promising prospects and widespread applications in display fields.

Direct Heat-Induced Patterning of Inorganic Nanomaterials

Patterning functional inorganic nanomaterials is an important process for advanced manufacturing of quantum dot (QD) electronic and optoelectronic devices. This is typically achieved by inkjet printing, microcontact printing, and photo- and e-beam lithography. Here, we investigate a different patterning approach that utilizes local heating, which can be generated by various sources, such as UV-, visible-, and IR-illumination, or by proximity heat transfer. This direct thermal lithography method, termed here heat-induced patterning of inorganic nanomaterials (HIPIN), uses colloidal nanomaterials with thermally unstable surface ligands. We designed several families of such ligands and investigated their chemical and physical transformations responsible for heat-induced changes of nanocrystal solubility. Compared to traditional photolithography using photochemical surface reactions, HIPIN extends the scope of direct optical lithography toward longer wavelengths of visible (532 nm) and infrared (10.6 μm) radiation, which is necessary for patterning optically thick layers (e.g., 1.2 μm) of light-absorbing nanomaterials. HIPIN enables patterning of features defined by the diffraction-limited beam size. Our approach can be used for direct patterning of metal, semiconductor, and dielectric nanomaterials. Patterned semiconductor QDs retain the majority of their as-synthesized photoluminescence quantum yield. This work demonstrates the generality of thermal patterning of nanomaterials and provides a new path for additive device manufacturing using diverse colloidal nanoscale building blocks.

Bright State Sensitized Triplet Energy Transfer from Quantum Dot to Molecular Acceptor Revealed by Temperature Dependent Energy Transfer Dynamics

Quantum dot (QD) sensitized molecular triplet excited state generation has been a promising alternative for traditional triplet state harvesting schemes. However, the correlation between QD bright/dark states and QD sensitized triplet energy transfer (TET) has been unclear. Herein, we studied the bright/dark states contribution to TET with CdSe/CdS core/shell QD-oligothiophene as the model system. Equilibrium between QD bright and dark states was tuned by changing temperature, and TET dynamics were monitored with transient absorption spectroscopy. Analysis of acceptor triplet excited state growth kinetics yields rates of TET from bright and dark states as 0.492 ± 0.011 ns^-1 and 0.0271 ± 0.0014 ns^-1 at 5 K, suggesting significant contribution of bright states to TET. The result was rationalized by bright state wave function components with the same electron/hole spin projections leading to nonzero TET probability. The study provides new insights into QD sensitized TET mechanisms and inspiration for future TET efficiency optimization through QD exciton engineering.

Bright, Magnetic NIR-II Quantum Dot Probe for Sensitive Dual-Modality Imaging and Intensive Combination Therapy of Cancer

Improving the effectiveness of cancer therapy will require tools that enable more specific cancer targeting and improved tumor visualization. Theranostics have the potential for improving cancer care because of their ability to serve as both diagnostics and therapeutics; however, their diagnostic potential is often limited by tissue-associated light absorption and scattering. Herein, we develop CuInSe₂@ZnS:Mn quantum dots (QDs) with intrinsic multifunctionality that both enable the accurate localization of small metastases and act as potent tumor ablation agents. By leveraging the growth kinetics of a ZnS shell on a biocompatible CuInSe₂ core, Mn doping, and folic acid functionalization, we produce biocompatible QDs with high near-infrared (NIR)-II fluorescence efficiency up to 31.2%, high contrast on magnetic resonance imaging (MRI), and preferential distribution in 4T1 breast cancer tumors. MRI-enabled contrast of these nanoprobes is sufficient to timely identify small metastases in the lungs, which is critically important for preventing cancer spreading and recurrence. Further, exciting tumor-resident QDs with NIR light produces both fluorescence for tumor visualization through radiative recombination pathways as well as heat and radicals through nonradiative recombination pathways that kill cancer cells and initiate an anticancer immune response, which eliminates tumor and prevents tumor regrowth in 80% of mice.

Optoelectronic Neural Interfaces Based on Quantum Dots

Optoelectronic modulation of neural activity is an emerging field for the investigation of neural circuits and the development of neural therapeutics. Among a wide variety of nanomaterials, colloidal quantum dots provide unique optoelectronic features for neural interfaces such as sensitive tuning of electron and hole energy levels via the quantum confinement effect, controlling the carrier localization via band alignment, and engineering the surface by shell growth and ligand engineering. Even though colloidal quantum dots have been frontier nanomaterials for solar energy harvesting and lighting, their application to optoelectronic neural interfaces has remained below their significant potential. However, this potential has recently gained attention with the rise of bioelectronic medicine. In this review, we unravel the fundamentals of quantum-dot-based optoelectronic biointerfaces and discuss their neuromodulation mechanisms starting from the quantum dot level up to electrode-electrolyte interactions and stimulation of neurons with their physiological pathways. We conclude the review by proposing new strategies and possible perspectives toward nanodevices for the optoelectronic stimulation of neural tissue by utilizing the exceptional nanoscale properties of colloidal quantum dots.

Ultra-narrow room-temperature emission from single CsPbBr3 perovskite quantum dots

Semiconductor quantum dots have long been considered artificial atoms, but despite the overarching analogies in the strong energy-level quantization and the single-photon emission capability, their emission spectrum is far broader than typical atomic emission lines. Here, by using ab-initio molecular dynamics for simulating exciton-surface-phonon interactions in structurally dynamic CsPbBr₃ quantum dots, followed by single quantum dot optical spectroscopy, we demonstrate that emission line-broadening in these quantum dots is primarily governed by the coupling of excitons to low-energy surface phonons. Mild adjustments of the surface chemical composition allow for attaining much smaller emission linewidths of 35−65 meV (vs. initial values of 70–120 meV), which are on par with the best values known for structurally rigid, colloidal II-VI quantum dots (20−60 meV). Ultra-narrow emission at room-temperature is desired for conventional light-emitting devices and paramount for emerging quantum light sources.

Narrow emission is desired for light-emitting devices. Here, Kovalenko et al. demonstrate that the emission line-broadening in perovskite quantum dots is dominated by the coupling between excitons and surface phonon modes which can be controlled by minimal surface modifications.

Quantum Shells Boost the Optical Gain of Lasing Media

Auger decay of multiple excitons represents a significant obstacle to photonic applications of semiconductor quantum dots (QDs). This nonradiative process is particularly detrimental to the performance of QD-based electroluminescent and lasing devices. Here, we demonstrate that semiconductor quantum shells with an "inverted" QD geometry inhibit Auger recombination, allowing substantial improvements to their multiexciton characteristics. By promoting a spatial separation between multiple excitons, the quantum shell geometry leads to ultralong biexciton lifetimes (>10 ns) and a large biexciton quantum yield. Furthermore, the architecture of quantum shells induces an exciton-exciton repulsion, which splits exciton and biexciton optical transitions, giving rise to an Auger-inactive single-exciton gain mode. In this regime, quantum shells exhibit the longest optical gain lifetime reported for colloidal QDs to date (>6 ns), which makes this geometry an attractive candidate for the development of optically and electrically pumped gain media.

Ultrafast spectroscopy studies of carrier dynamics in semiconductor nanocrystals

Semiconductor nanocrystals have become ubiquitous both in scientific research and in applied technologies related to light. When a nanocrystal absorbs a photon an electron-hole pair is created whose fate dictates whether the nanocrystal will be suitable for a particular application. Ultrafast spectroscopy provides a real-time window to monitor the evolution of the electron-hole pair. In this review, we focus on CdSe nanocrystals, the most-studied nanocrystal system to date, and also highlight ultrasmall nanocrystals, "standard nanocrystals" of different binary composition, alloyed nanocrystals, and core/shell nanocrystals and nanorods. We focus on four time-resolved spectroscopies used to interrogate nanocrystals: pump-probe, fluorescence upconversion, time-correlated single photon counting, and non-linear spectroscopies. The basics of the nanocrystals and the spectroscopies are presented, followed by a detailed synopsis of ultrafast spectroscopy studies performed on the various semiconductor nanocrystal systems.

Highly luminescent red-emitting In(Zn)P quantum dots using zinc oxo cluster: synthesis and application to light-emitting diodes

Despite the importance of separating nucleation steps from growth steps for the production of monodisperse highly luminescent In(Zn)P quantum dots (QDs), the practical implementation of this strategy is hindered by the high reactivity and fast depletion of conventional P precursors. This problem can be mitigated through the use of (i) Zn oxo clusters, which effectively regulate the kinetics of QD growth and prevent the fast depletion of conventional P precursors in the nucleation step, or (ii) seed-mediated continuous growth methods, which avoid secondary nucleation in the growth step and yield red-emitting InP QDs. Herein, we combine approaches (i) and (ii) to synthesize red-emitting In(Zn)P QDs with a high photoluminescence quantum yield (>93%) and a low emission bandwidth (full width at half maximum = 38 nm), revealing that our strategy hinders the carboxylate ketonization-induced generation of byproducts and suppresses the surface oxidation of In(Zn)P QDs during growth steps. The prepared In(Zn)P QDs are used to fabricate QD light-emitting diodes with a maximum brightness of 1164 cd m^-2 and an external quantum efficiency of 3.61%. Thus, our results pave the way to the replacement of toxic Cd- and Pb-based QDs with more eco-friendly Zn- and In-based analogs for a variety of applications.

Bioactive Graphene Quantum Dots Based Polymer Composite for Biomedical Applications

Today, nanomedicine seeks to develop new polymer composites to overcome current problems in diagnosing and treating common diseases, especially cancer. To achieve this goal, research on polymer composites has expanded so that, in recent years, interdisciplinary collaborations between scientists have been expanding day by day. The synthesis and applications of bioactive GQD-based polymer composites have been investigated in medicine and biomedicine. Bioactive GQD-based polymer composites have a special role as drug delivery carriers. Bioactive GQDs are one of the newcomers to the list of carbon-based nanomaterials. In addition, the antibacterial and anti-diabetic potentials of bioactive GQDs are already known. Due to their highly specific surface properties, π-π aggregation, and hydrophobic interactions, bioactive GQD-based polymer composites have a high drug loading capacity, and, in case of proper correction, can be used as an excellent option for the release of anticancer drugs, gene carriers, biosensors, bioimaging, antibacterial applications, cell culture, and tissue engineering. In this paper, we summarize recent advances in using bioactive GQD-based polymer composites in drug delivery, gene delivery, thermal therapy, thermodynamic therapy, bioimaging, tissue engineering, bioactive GQD synthesis, and GQD green resuscitation, in addition to examining GQD-based polymer composites.

Characterization of Chirality in Diffractive Metasurfaces by Photothermal Deflection Technique

Chirality, a lack of mirror symmetry, is present in nature at all scales; at the nanoscale, it governs the biochemical reactions of many molecules, influencing their pharmacology and toxicity. Chiral substances interact with left and right circularly polarized light differently, but this difference is very minor in natural materials. Specially engineered, nanostructured, periodic materials can enhance the chiro-optical effects if the symmetry in their interactions with circular polarization is broken. In the diffraction range of such metasurfaces, the intensity of diffracted orders depends on the chirality of the input beam. In this work, we combine a photothermal deflection experiment with a novel theoretical framework to reconstruct both the thermal and optical behavior of chiro-optical behavior in diffracted beams.

Trade-offs between Translational and Orientational Order in 2D Superlattices of Polygonal Nanocrystals with Differing Edge Count

The goal of this work is to identify factors which modulate structural order in 2D self-assembled superlattices of polygon-shaped colloidal nanocrystals. Using combined experimental and simulation techniques, we quantify order in superlattices of hexagonal prism-shaped CdSe/CdS nanocrystals and cube-shaped CsPbBr₃ nanocrystals. Superlattices derived from cube-shaped nanocrystals display less translational order compared to hexagonal prism-shaped nanocrystals both experimentally and in simulations. This effect can be attributed to geometric considerations inherent to the combined rotational and translational symmetries of different polygonal shapes and their superlattices. Cubes form a simple cubic lattice where nanocrystals can slide without steric overlap, whereas hexagonal prisms interlock, preventing translation. Regarding orientational order, cube assemblies display a narrower orientation distribution. Intuitively, hexagonal prisms are a more "spherical" shape compared to cubes. The results presented here outline a conceptual framework for identifying superlattice structures which favor translationally and orientationally ordered self-assembled superlattices.

Thermodynamics of nanocrystal–ligand binding through isothermal titration calorimetry

Manipulations of nanocrystal (NC) surfaces have propelled the applications of colloidal NCs across various fields such as bioimaging, catalysis, electronics, and sensing applications.

Increasing the Energy Gap between Band-Edge and Trap States Slows Down Picosecond Carrier Trapping in Highly Luminescent InP/ZnSe/ZnS Quantum Dots

Non-toxic InP-based nanocrystals have been developed for promising candidates for commercial optoelectronic applications and they still require further improvement on photophysical properties, compared to Cd-based quantum dots (QDs), for better device efficiency and long-term stability. It is, therefore, essential to understand the precise mechanism of carrier trapping even in the state-of-the-art InP-based QD with near-unity luminescence. Here, it is shown that using time-resolved spectroscopic measurements of systematically size-controlled InP/ZnSe/ZnS core/shell/shell QDs with the quantum yield close to one, carrier trapping decreases with increasing the energy difference between band-edge and trap states, indicating that the process follows the energy gap law, well known in molecular photochemistry for nonradiative internal conversion between two electronic states. Similar to the molecular view of the energy gap law, it is found that the energy gap between the band-edge and trap states is closely associated with ZnSe phonons that assist carrier trapping into defects in highly luminescent InP/ZnSe/ZnS QDs. These findings represent a striking departure from the generally accepted view of carrier trapping mechanism in QDs in the Marcus normal region, providing a step forward understanding how excitons in nanocrystals interact with traps, and offering valuable guidance for making highly efficient and stable InP-based QDs.

Recent Advances and Prospects in Colloidal Nanomaterials

Colloidal nanomaterials of metals, metal oxides, and metal chalcogenides have attracted great attention in the past decade owing to their potential applications in optoelectronics, catalysis, and energy conversion. Introduction of various synthetic routes has resulted in diverse colloidal nanostructured materials with well-controlled size, shape, and composition, enabling the systematic study of their intriguing physicochemical, optoelectronic, and chemical properties. Furthermore, developments in the instrumentation have offered valuable insights into the nucleation and growth mechanism of these nanomaterials, which are crucial in designing prospective materials with desired properties. In this perspective, recent advances in the colloidal synthesis and mechanism studies of nanomaterials of metal chalcogenides, metals, and metal oxides are discussed. In addition, challenges in the characterization and future direction of the colloidal nanomaterials are provided.

Luminescent Metal-Phenolic Networks for Multicolor Particle Labeling

The development of fluorescence labeling techniques has attracted widespread interest in various fields, including biomedical science as it can facilitate high-resolution imaging and the spatiotemporal understanding of various biological processes. We report a supramolecular fluorescence labeling strategy using luminescent metal-phenolic networks (MPNs) constructed from metal ions, phenolic ligands, and common and commercially available dyes. The rapid labeling process (<5 min) produces ultrathin coatings (≈10 nm) on diverse particles (e.g., organic, inorganic, and biological entities) with customized luminescence (e.g., red, blue, multichromatic, and white light) simply through the selection of fluorophores. The fluorescent coatings are stable at pH values from 1 to 8 and in complex biological media owing to the dominant π interactions between the dyes and MPNs. These coatings exhibit negligible cytotoxicity and their strong fluorescence is retained even when internalized into intracellular compartments. This strategy is expected to provide a versatile approach for fluorescence labeling with potential in diverse fields across the physical and life sciences.

Near infrared bioimaging and biosensing with semiconductor and rare-earth nanoparticles: recent developments in multifunctional nanomaterials

Research in novel materials has been extremely active over the past few decades, wherein a major area of interest has been nanoparticles with special optical properties. These structures can overcome some of the intrinsic limitations of contrast agents routinely used in medical practice, while offering additional functionalities. Materials that absorb or scatter near infrared light, to which biological tissues are partially transparent, have attracted significant attention and demonstrated their potential in preclinical research. In this review, we provide an at-a-glance overview of the most recent developments in near infrared nanoparticles that could have far-reaching applications in the life sciences. We focus on materials that offer additional functionalities besides diagnosis based on optical contrast: multiple imaging modalities (multimodal imaging), sensing of physical and chemical cues (multivariate diagnosis), or therapeutic activity (theranostics). Besides presenting relevant case studies for each class of optically active materials, we discuss their design and safety considerations, detailing the potential hurdles that may complicate their clinical translation. While multifunctional nanomaterials have shown promise in preclinical research, the field is still in its infancy; there is plenty of room to maximize its impact in preclinical studies as well as to deliver it to the clinics.