Voltage decay and redox asymmetry mitigation by reversible cation migration in lithium-rich layered oxide electrodes

Air Corrosion of Layered Cathode Materials for Sodium-Ion Batteries: Cation Mixing and a Practical Suppression Strategy

Layered oxide cathodes of sodium-ion batteries (SIBs) are considered promising candidates due to their fascinating high capacity, good cyclability, and environmental friendliness. However, the air sensitivity of layered SIB cathodes causes high electrode manufacturing costs and performance deterioration, hampering their practical application. Herein, a commercial O3-type layered Na(Ni1/3Fe1/3Mn1/3)O2 (NNFM) material is adopted to investigate the air corrosive problem and the suppression strategy. We reveal that once the layered material comes in contact with ambient air, cations migrate from transition metal (TM) layers to sodium layers at the near surface, although Na+ and TM ions show quite different ion radii. Experimental results and theoretical calculations show that more Ni/Na disorder occurs in the air-exposed O3-NNFM materials, owing to a lower Ni migration energy barrier. The cation mixing results in detrimental structural distortion, along with the formation of residual alkali species on the surface, leading to high impedance for Na+ diffusion during charge/discharge. To tackle this problem, an ultrathin and uniform hydrophobic molecular layer of perfluorodecyl trimethoxysilane is assembled on the O3-NNFM surface, which significantly suppresses unfavorable chemistry and structure degradation during air storage. The in-depth understanding of the structural degradation mechanism and suppression strategy presented in this work can facilitate high-energy cathode manufacturing from the perspective of future practical implementation and commercialization.

Phase segregation and nanoconfined fluid O2 in a lithium-rich oxide cathode

Lithium-rich oxide cathodes lose energy density during cycling due to atomic disordering and nanoscale structural rearrangements, which are both challenging to characterize. Here we resolve the kinetics and thermodynamics of these processes in an exemplar layered Li-rich (Li1.2-xMn0.8O2) cathode using a combined approach of ab initio molecular dynamics and cluster expansion-based Monte Carlo simulations. We identify a kinetically accessible and thermodynamically favourable mechanism to form O2 molecules in the bulk, involving Mn migration and driven by interlayer oxygen dimerization. At the top of charge, the bulk structure locally phase segregates into MnO2-rich regions and Mn-deficient nanovoids, which contain O2 molecules as a nanoconfined fluid. These nanovoids are connected in a percolating network, potentially allowing long-range oxygen transport and linking bulk O2 formation to surface O2 loss. These insights highlight the importance of developing strategies to kinetically stabilize the bulk structure of Li-rich O-redox cathodes to maintain their high energy densities.

Electrochemomechanical failure in layered oxide cathodes caused by rotational stacking faults

Electrochemomechanical degradation is one of the most common causes of capacity deterioration in high-energy-density cathodes, particularly intercalation-based layered oxides. Here we reveal the presence of rotational stacking faults (RSFs) in layered lithium transition-metal oxides, arising from specific stacking sequences at different angles, and demonstrate their critical role in determining structural/electrochemical stability. Our combined experiments and calculations show that RSFs facilitate oxygen dimerization and transition-metal migration in layered oxides, fostering microcrack nucleation/propagation concurrently with cumulative electrochemomechanical degradation on cycling. We further show that thermal defect annihilation as a potential solution can suppress RSFs, reducing microcracks and enhancing cyclability in lithium-rich layered cathodes. The common but previously overlooked occurrence of RSFs suggests a new synthesis guideline of high-energy-density layered oxide cathodes.

Zero Voltage-Degradation of Li2MnO3 with Ultrathin Amorphous Li─Mn─O Coating

Manganese-based lithium-rich layered oxides (Mn-LLOs) are promising candidate cathode materials for lithium-ion batteries, however, the severe voltage decay during cycling is the most concern for their practical applications. Herein, an Mn-based composite nanostructure constructed Li2MnO3 (LMO@Li2MnO3) is developed via an ultrathin amorphous functional oxide LixMnOy coating at the grain surface. Due to the thin and universal LMO amorphous surface layer etched from the lithiation process by the high-concentration alkaline solution, the structural and interfacial stability of Li2MnO3 are enhanced apparently, showing the significantly improved voltage maintenance, cycle stability, and energy density. In particular, the LMO@Li2MnO3 cathode exhibits zero voltage decay over 200 cycles. Combining with ex situ spectroscopic and microscopic techniques, the Mn2+/4+ coexisted behavior of the amorphous LMO is revealed, which enables the stable electrochemistry of Li2MnO3. This work provides new possible routes for suppressing the voltage decay of Mn-LLOs by modifying with the composite functional unit construction.

Hidden Negative Issues and Possible Solutions for Advancing the Development of High-Energy-Density in Lithium Batteries: A Review

This review article discusses the hidden or often overlooked negative issues of large-capacity cathodes, high-voltage systems, concentrated electrolytes, and reversible lithium metal electrodes in high-energy-density lithium batteries and provides some feasible solutions that can realize the construction of realistic rechargeable batteries with higher energy densities. Similar objective discussion of the negative aspects of lithium-air batteries, multi-valent shuttles, anion shuttles, sulfur cathode systems, and all-solid ceramic batteries can help fabricate more realistic batteries.

Influence of Li Content on the Topological Inhibition of Oxygen Loss in Li-Rich Cathode Materials

Lithium-rich layer oxide cathodes are promising energy storage materials due to their high energy densities. However, the oxygen loss during cycling limits their practical applications. Here, the essential role of Li content on the topological inhibition of oxygen loss in lithium-rich cathode materials and the relationship between the migration network of oxygen ions and the transition metal (TM) component are revealed. Utilizing first-principles calculations in combination with percolation theory and Monte Carlo simulations, it is found that TM ions can effectively encage the oxidized oxygen species when the TM concentration in TM layer exceeds 5/6, which hinders the formation of a percolating oxygen migration network. This study demonstrates the significance of rational compositional design in lithium-rich cathodes for effectively suppressing irreversible oxygen release and enhancing cathode cycling performance.

Oxygen vacancy chemistry in oxide cathodes

Secondary batteries are a core technology for clean energy storage and conversion systems, to reduce environmental pollution and alleviate the energy crisis. Oxide cathodes play a vital role in revolutionizing battery technology due to their high capacity and voltage for oxide-based batteries. However, oxygen vacancies (OVs) are an essential type of defect that exist predominantly in both the bulk and surface regions of transition metal (TM) oxide batteries, and have a crucial impact on battery performance. This paper reviews previous studies from the past few decades that have investigated the intrinsic and anionic redox-mediated OVs in the field of secondary batteries. We focus on discussing the formation and evolution of these OVs from both thermodynamic and kinetic perspectives, as well as their impact on the thermodynamic and kinetic properties of oxide cathodes. Finally, we offer insights into the utilization of OVs to enhance the energy density and lifespan of batteries. We expect that this review will advance our understanding of the role of OVs and subsequently boost the development of high-performance electrode materials for next-generation energy storage devices.

Correlating concerted cations with oxygen redox in rechargeable batteries

Rechargeable batteries currently power much of our world, but with the increased demand for electric vehicles (EVs) capable of traveling hundreds of miles on a single charge, new paradigms are necessary for overcoming the limits of energy density, particularly in rechargeable batteries. The emergence of reversible anionic redox reactions presents a promising direction toward achieving this goal; however this process has both positive and negative effects on battery performance. While it often leads to higher capacity, anionic redox also causes several unfavorable effects such as voltage fade, voltage hysteresis, sluggish kinetics, and oxygen loss. However, the introduction of cations with topological chemistry tendencies has created an efficient pathway for achieving long-term oxygen redox with improved kinetics. The cations serve as pillars in the crystal structure and meanwhile can interact with oxygen in ways that affect the oxygen redox process through their impact on the electronic structure. This review delves into a detailed examination of the fundamental physical and chemical characteristics of oxygen redox and elucidates the crucial role that cations play in this process at the atomic and electronic scales. Furthermore, we present a systematic summary of polycationic systems, with an emphasis on their electrochemical performance, in order to provide perspectives on the development of next-generation cathode materials.

High-Performance Single-Crystal Lithium-Rich Layered Oxides Cathode Materials via Na2WO4-Assisted Sintering

Single-crystal lithium-rich layered oxides (LLOs) with excellent mechanical properties can enhance their crystal structure stability. However, the conventional methods for preparing single-crystal LLOs, require large amounts of molten salt additives, involve complicated washing steps, and increase the difficulty of large-scale production. In this study, a sodium tungstate (Na2WO4)-assisted sintering method is proposed to fabricate high-performance single-crystal LLOs cathode materials without large amounts of additives and additional washing steps. During the sintering process, Na2WO4 promotes particle growth and forms a protective coating on the surface of LLOs particles, effectively suppressing the side reactions at the cathode/electrolyte interface. Additionally, trace amounts of Na and W atoms are doped into the LLOs lattice via gradient doping. Experimental results and theoretical calculations indicate that Na and W doping stabilizes the crystal structure and enhances the Li+ ions diffusion rate. The prepared single-crystal LLOs exhibit outstanding capacity retention of 82.7% (compared to 65.0%, after 200 cycles at 1 C) and a low voltage decay rate of 0.76 mV per cycle (compared to 1.80 mV per cycle). This strategy provides a novel pathway for designing the next-generation high-performance cathode materials for Lithium-ion batteries (LIBs).

Regulation of Coordination Chemistry for Ultrastable Layered Oxide Cathode Materials of Sodium-Ion Batteries

Layered transition-metal (TM) oxide cathodes have attracted growing attention in sodium-ion batteries (SIBs). However, their practical implementation is plagued by Jahn-Teller distortion and irreversible cation migration, leading to severe voltage decay and structure instability. Herein, O3-Na0.898K0.058Ni0.396Fe0.098Mn0.396Ti0.092O2 (KT-NFM) is reported as an ultrastable cathode material via multisite substitution with rigid KO6 pillars and flexible TiO6 octahedra. The K pillars induce contracted TMO2 slabs and their strong Coulombic repulsion to inhibit Ni/Fe migration; and Ti incorporation reinforces the hybridization of Ni(3deg*)-O(2p) to mitigate the undesired O3-O'3 phase transition. These enable the reversible redox of Ni2+↔Ni3 . 20+ and Fe3+↔Fe3.69+ for 138.6 mAh g-1 and ultrastable cycles with >90% capacity retention after 2000 cycles in a pouch cell of KT-NFM||hard carbon. This will provide insights into the design of ultrastable layered cathode materials of sodium-ion batteries and beyond.

From Oxygen Redox to Sulfur Redox: A Paradigm for Li-Rich Layered Cathodes

The utilization of anionic redox chemistry provides an opportunity to further improve the energy density of Li-ion batteries, particularly for Li-rich layered oxides. However, oxygen-based hosts still suffer from unfavorable structural rearrangement, including the oxygen release and transition metal (TM)-ion migration, in association with the tenuous framework rooted in the ionicity of the TM-O bonding. An intrinsic solution, by using a sulfur-based host with strong TM-S covalency, is proposed here to buffer the lattice distortion upon the highly activating sulfur redox process, and it achieves howling success in stabilizing the host frameworks. Experimental results demonstrate the prolonged preservation of the layered sulfur lattice, especially the honeycomb superlattice, during the Li+ extraction/insertion process in contrast to the large structural degeneration in Li-rich oxides. Moreover, the Li-rich sulfide cathodes exhibited a negligible overpotential of 0.08 V and a voltage drop of 0.13 mV/cycle, while maintaining a substantial reversible capacity upon cycling. These superior electrochemical performances can be unambiguously ascribed to the much shorter trajectories of sulfur in comparison to those of oxygen revealed by molecular dynamics simulations at a large scale (∼30 nm) and a long time scale (∼300 ps) via high-dimensional neural network potentials during the delithiation process. Our findings highlight the importance of stabilizing host frameworks and establish general guidance for designing Li-rich cathodes with durable anionic redox chemistry.

Trapped O2 and the origin of voltage fade in layered Li-rich cathodes

Oxygen redox cathodes, such as Li1.2Ni0.13Co0.13Mn0.54O2, deliver higher energy densities than those based on transition metal redox alone. However, they commonly exhibit voltage fade, a gradually diminishing discharge voltage on extended cycling. Recent research has shown that, on the first charge, oxidation of O2- ions forms O2 molecules trapped in nano-sized voids within the structure, which can be fully reduced to O2- on the subsequent discharge. Here we show that the loss of O-redox capacity on cycling and therefore voltage fade arises from a combination of a reduction in the reversibility of the O2-/O2 redox process and O2 loss. The closed voids that trap O2 grow on cycling, rendering more of the trapped O2 electrochemically inactive. The size and density of voids leads to cracking of the particles and open voids at the surfaces, releasing O2. Our findings implicate the thermodynamic driving force to form O2 as the root cause of transition metal migration, void formation and consequently voltage fade in Li-rich cathodes.

Regulating Oxygen Redox Chemistry through the Synergistic Effect of Transition-Metal Vacancy and Substitution Element for Layered Oxide Cathodes

Reversible oxygen redox (OR) is considered as a paradigmatic avenue to boost the energy densities of layered oxide cathodes. However, its activation is largely coupled with the local coordination environment around oxygen, which is usually accompanied with irreversible oxygen release and unfavorable structure distortion. Herein, it is revealed that the synergistic effect of transition-metal (TM) vacancy and substitution element for modulating the OR activity and reversibility of layered Na0.67 MnO2 through multimodal operando synchrotron characterizations and electrochemical investigations. It is disclosed that TM vacancy can not only suppress the complicated phase transition but also stimulate the OR activity by creating nonbonding O 2p states via the Na─O─vacancy configurations. Notably, the substitution element plays a decisive role for regulating the reversibility of vacancy-boosted OR activity: the presence of strong Al─O bonds stabilizes the Mn-O motifs by sharing O with Al in the rigid Mn─O─Al frameworks, which mitigates TM migration and oxygen release induced by TM vacancy, leading to enhanced OR reversibility; while the introduction of weak Zn─O bonds exacerbates TM migration and irreversible oxygen release. This work clarifies the critical role of both TM vacancy and substitution element for regulating the OR chemistry, providing an effective avenue for designing high-performance cathodes employing anionic redox.

Phase Engineering via Aluminum Doping Enhances the Electrochemical Stability of Lithium-Rich Cobalt-Free Layered Oxides for Lithium-Ion Batteries

Lithium-rich, cobalt-free oxides are promising potential positive electrode materials for lithium-ion batteries because of their high energy density, lower cost, and reduced environmental and ethical concerns. However, their commercial breakthrough is hindered because of their subpar electrochemical stability. This work studies the effect of aluminum doping on Li1.26 Ni0.15 Mn0.61 O2 as a lithium-rich, cobalt-free layered oxide. Al doping suppresses voltage fade and improves the capacity retention from 46% for Li1.26 Ni0.15 Mn0.61 O2 to 67% for Li1.26 Ni0.15 Mn0.56 Al0.05 O2 after 250 cycles at 0.2 C. The undoped material has a monoclinic Li2 MnO3 -type structure with spinel on the particle edges. In contrast, Al-doped materials (Li1.26 Ni0.15 Mn0.61-x Alx O2 ) consist of a more stable rhombohedral phase at the particle edges, with a monoclinic phase core. For this core-shell structure, the formation of Mn3+ is suppressed along with the material's decomposition to a disordered spinel, and the amount of the rhombohedral phase content increases during galvanostatic cycling. Whereas previous studies generally provided qualitative insight into the degradation mechanisms during electrochemical cycling, this work provides quantitative information on the stabilizing effect of the rhombohedral shell in the doped sample. As such, this study provides fundamental insight into the mechanisms through which Al doping increases the electrochemical stability of lithium-rich cobalt-free layered oxides.

Modification Strategies of High-Energy Li-Rich Mn-Based Cathodes for Li-Ion Batteries: A Review

Li-rich manganese-based oxide (LRMO) cathode materials are considered to be one of the most promising candidates for next-generation lithium-ion batteries (LIBs) because of their high specific capacity (250 mAh g-1) and low cost. However, the inevitable irreversible structural transformation during cycling leads to large irreversible capacity loss, poor rate performance, energy decay, voltage decay, etc. Based on the recent research into LRMO for LIBs, this review highlights the research progress of LRMO in terms of crystal structure, charging/discharging mechanism investigations, and the prospects of the solution of current key problems. Meanwhile, this review summarizes the specific modification strategies and their merits and demerits, i.e., surface coating, elemental doping, micro/nano structural design, introduction of high entropy, etc. Further, the future development trend and business prospect of LRMO are presented and discussed, which may inspire researchers to create more opportunities and new ideas for the future development of LRMO for LIBs with high energy density and an extended lifespan.

Interpretable Machine Learning To Accelerate the Analysis of Doping Effect on Li/Ni Exchange in Ni-Rich Layered Oxide Cathodes

In Ni-rich layered oxide cathodes, one effective way to adjust the performance is by introducing dopants to change the degree of Li/Ni exchange. We calculated the formation energy of Li/Ni exchange defects in LiNi0.8Mn0.1X0.1O2 with different doping elements X, using first-principles calculations. We then proposed an interpretable machine learning method combining the Random Forest (RF) model and the Shapley Additive Explanation (SHAP) analysis to accelerate identification of the key factors influencing the formation energy among the complex variables introduced by doping. The valence state of the doping element effectively regulates Li/Ni exchange defects through changing the valence state of Ni and the strength of the superexchange interaction, and COOPSU-SD and MagO were proposed as two indicators to assess superexchange interaction. The volume change also affects the Li/Ni exchange defects, with a larger volume reduction corresponding to fewer Li/Ni exchange defects.

Structurally robust lithium-rich layered oxides for high-energy and long-lasting cathodes

O2-type lithium-rich layered oxides, known for mitigating irreversible transition metal migration and voltage decay, provide suitable framework for exploring the inherent properties of oxygen redox. Here, we present a series of O2-type lithium-rich layered oxides exhibiting minimal structural disordering and stable voltage retention even with high anionic redox participation based on the nominal composition. Notably, we observe a distinct asymmetric lattice breathing phenomenon within the layered framework driven by excessive oxygen redox, which includes substantial particle-level mechanical stress and the microcracks formation during cycling. This chemo-mechanical degradation can be effectively mitigated by balancing the anionic and cationic redox capabilities, securing both high discharge voltage (~ 3.43 V vs. Li/Li+) and capacity (~ 200 mAh g-1) over extended cycles. The observed correlation between the oxygen redox capability and the structural evolution of the layered framework suggests the distinct intrinsic capacity fading mechanism that differs from the previously proposed voltage fading mode.

Enabling High-Performance Layered Li-Rich Oxide Cathodes by Regulating the Formation of Integrated Cation-Disordered Domains

Layered Li-rich oxide cathode materials are capable of offering high energy density due to their cumulative cationic and anionic redox mechanism during (de)lithiation process. However, the structural instability of the layered Li-rich oxide cathode materials, especially in the deeply delitiated state, results in severe capacity and voltage degradation. Considering the minimal isotropic structural evolution of disordered rock salt oxide cathode during cycling, cation-disordered nano-domains have been controllably introduced into layered Li-rich oxides by co-doping of d0 -TM and alkali ions. Combining electrochemical and synchrotron-based advanced characterizations, the incorporation of the phase-compatible cation-disordered domains can not only hinder the oxygen framework collapse along the c axis of layered Li-rich cathode under high operation voltage but also promote the Mn and anionic activities as well as Li+ (de)intercalation kinetics, leading to remarkable improvement in rate capability and mitigation of capacity and voltage decay. With this unique layered/rocksalt intergrown structure, the intergrown cathode yields an ultrahigh capacity of 288.4 mAh g-1 at 0.1 C, and outstanding capacity retention of ≈90.0% with obviously suppressed voltage decay after 100 cycles at 0.5, 1, and 2 C rate. This work provides a new direction toward advanced cathode materials for next-generation Li-ion batteries.

Unlocking the Potential of Li-Rich Mn-Based Oxides for High-Rate Rechargeable Lithium-Ion Batteries

Lithium-rich Mn-based oxides have gained significant attention worldwide as potential cathode materials for the next generation of high-energy density lithium-ion batteries. Nonetheless, the inferior rate capability and voltage decay issues present formidable challenges. Here, a Li-rich material equipped with quasi-three-dimensional (quasi-3D) Li-ion diffusion channels is initially synthesized by introducing twin structures with high Li-ion diffusion coefficients into the crystal and constructing a "bridge" between different Li-ion diffusion tunnels. The as-prepared material exhibits monodispersed micron-sized primary particles (MP), delivering a specific capacity of 303 mAh g-1 at 0.1 C and an impressive capacity of 253 mAh g-1 at 1 C. More importantly, the twin structure also serves as a "breakwater" to inhibit the migration of Mn ions and improve the overall structural stability, leading to cycling stability with 85% capacity retention at 1 C after 200 cycles. The proposed strategy of constructing quasi-3D channels in the layered Li-rich cathodes will open up new avenues for the research and development of other layered oxide cathodes, with potential applications in industry.

Novel Low-Strain Layered/Rocksalt Intergrown Cathode for High-Energy Li-Ion Batteries

Both layered- and rocksalt-type Li-rich cathode materials are drawing great attention due to their enormous capacity, while the individual phases have their own drawbacks, such as great volume change for the layered phase and low electronic and ionic conductivities for the rocksalt phase. Previously, we have reported the layered/rocksalt intergrown cathodes with nearly zero-strain operation, while the use of precious elements hinders their industrial applications. Herein, low-cost 3d Mn4+ ions are utilized to partially replace the expensive Ru5+ ions, to develop novel ternary Li-rich cathode material Li1+x[RuMnNi]1-xO2. The as-designed Li1.15Ru0.25Mn0.2Ni0.4O2 is revealed to have a layered/rock salt intergrown structure by neutron diffraction and transmission electron microscopy. The as-designed cathode exhibits ultrahigh lithium-ion reversibility, with 0.86 (231.1 mAh g-1) out of a total Li+ inventory of 1.15 (309.1 mAh g-1). The X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectra further demonstrate that the high Li+ storage of the intergrown cathode is enabled by leveraging cationic and anionic redox activities in charge compensation. Surprisingly, in situ X-ray diffraction shows that the intergrown cathode undergoes extremely low-strain structural evolution during the charge-discharge process. Finally, the Mn content in the intergrown cathodes is found to be tunable, providing new insights into the design of advanced cathode materials for high-energy Li-ion batteries.

Design of a trigonal halide superionic conductor by regulating cation order-disorder

Lithium-metal-halides have emerged as a class of solid electrolytes that can deliver superionic conductivity comparable to that of state-of-the-art sulfide electrolytes, as well as electrochemical stability that is suitable for high-voltage (>4 volt) operations. We show that the superionic conduction in a trigonal halide, such as Li3MCl6 [where metal (M) is Y or Er], is governed by the in-plane lithium percolation paths and stacking interlayer distance. These two factors are inversely correlated with each other by the partial occupancy of M, serving as both a diffusion inhibitor and pillar for maintaining interlayer distance. These findings suggest that a critical range or ordering of M exists in trigonal halides, and we showcase the achievement of high ionic conductivity by adjusting the simple M ratio (per Cl or Li). We provide general design criteria for superionic trigonal halide electrolytes.

Decoupling the roles of Ni and Co in anionic redox activity of Li-rich NMC cathodes

Li[LixNiyMnzCo1-x-y-z]O2 (lithium-rich NMCs) are benchmark cathode materials receiving considerable attention due to the abnormally high capacities resulting from their anionic redox chemistry. Although their anionic redox mechanisms have been much investigated, the roles of cationic redox processes remain underexplored, hindering further performance improvement. Here we decoupled the effects of nickel and cobalt in lithium-rich NMCs via a comprehensive study of two typical compounds, Li1.2Ni0.2Mn0.6O2 and Li1.2Co0.4Mn0.4O2. We discovered that both Ni3+/4+ and Co4+, generated during cationic redox processes, are actually intermediate species for triggering oxygen redox through a ligand-to-metal charge-transfer process. However, cobalt is better than nickel in mediating the kinetics of ligand-to-metal charge transfer by favouring more transition metal migration, leading to less cationic redox but more oxygen redox, more O2 release, poorer cycling performance and more severe voltage decay. Our work highlights a compositional optimization pathway for lithium-rich NMCs by deviating from using cobalt to using nickel, providing valuable guidelines for future high-capacity cathode design.

Durable lithium-ion insertion/extraction and migration behavior of LiF-encapsulated cobalt-free lithium-rich manganese-based layered oxide cathode

Lithium-rich manganese-based cathode has made a subject of intense scrutiny for scientists and application researchers due to their exceptional thermal stability, high specific capacity, high operating voltage, and cost-effectiveness. However, the inclusion of cobalt, as a crucial component in lithium-rich manganese-based cathode materials, has become a cause for concern due to its limited availability and non-renewable nature, which eventually limits the growth of the battery industry and increase costs. Considering the poor stability of cobalt-free cathode, this work proposes a coating strategy of LiF through a simple high-temperature melting method. Directly coating LiF on Li1.2Ni0.2Mn0.6O2 surface is found to be an effective way to protect the cathode material, decrease metal solubility, and inhibit irreversible phase transition processes, thus leading to an improved electrochemical performance. As a result, the battery employing LiF coated Li1.2Ni0.2Mn0.6O2 cathode can be stabilized over 280 cycles and maintain a capacity of 110 mAh g-1 at 1C. What's more, the mechanisms of ion insertion/extraction behavior and ion migration process are also studied systematically. This study will open the avenue to develop a high-energy battery system with cobalt-free cathode.

Artificial Post-Cycled Structure Modulation Towards Highly Stable Li-Rich Layered Cathode

High-capacity Li-rich layered oxides (LLOs) suffer from severe structure degradation due to the utilization of hybrid anion- and cation-redox activity. The native post-cycled structure, composed of progressively densified defective spinel layer (DSL) and intrinsic cations mixing, is deemed as the hindrance of the rapid and reversible de/intercalation of Li+ . Herein, the artificial post-cycled structure consisting of artificial DSL and inner cations mixing is in situ constructed, which would act as a shield against the irreversible oxygen emission and undesirable transition metal migration by suppressing anion redox activity and modulating cation mixing. Eventually, the modified DSL-2% Li-rich cathode demonstrates remarkable electrochemical properties with a high discharge capacity of 187 mAh g-1 after 500 cycles at 2 C, and improved voltage stability. Even under harsh operating conditions of 50 °C, DSL-2% can provide a high discharge capacity of 168 mAh g-1 after 250 cycles at 2 C, which is much higher than that of pristine LLO (92 mAh g-1 ). Furthermore, the artificial post-cycled structure provides a novel perspective on the role of native post-cycled structure in sustaining the lattice structure of the lithium-depleted region and also provides an insightful universal design principle for highly stable intercalated materials with anionic redox activity.

A Mechanistic Insight into the Oxygen Redox of Li-Rich Layered Cathodes and their Related Electronic/Atomic Behaviors Upon Cycling

Li-rich cathodes are extensively investigated as their energy density is superior to Li stoichiometric cathode materials. In addition to the transition metal redox, this intriguing electrochemical performance originates from the redox reaction of the anionic sublattice. This new redox process, the so-called anionic redox or, more directly, oxygen redox in the case of oxides, almost doubles the energy density of Li-rich cathodes compared to conventional cathodes. Numerous theoretical and experimental investigations have thoroughly established the current understanding of the oxygen redox of Li-rich cathodes. However, different reports are occasionally contradictory, indicating that current knowledge remains incomplete. Moreover, several practical issues still hinder the real-world application of Li-rich cathodes. As these issues are related to phenomena resulting from the electronic to atomic evolution induced by unstable oxygen redox, a fundamental multiscale understanding is essential for solving the problem. In this review, the current mechanistic understanding of oxygen redox, the origin of the practical problems, and how current studies tackle the issues are summarized.

Anion-Cation Dual-Ion Multisite Doping Stabilizes the Crystal Structure of Li-Rich Layered Oxides

Li-rich layered oxide (LLOs) cathode materials are gaining increasing attention as lithium-ion batteries (LIBs) pursue greater energy density. However, LLOs still suffer from severe capacity fading and voltage decay due to their unstable crystal structure. Hence, the anion-cation dual-ion multisite doping strategy based on Mg and S atoms is used to stabilize the crystal structures of LLOs. Mg substitutes Li atoms in the Li and transition-metal (TM) layers, while S atoms occupy tetrahedral interstitial sites and lattice O sites, all of which contribute to the crystal structure stability of LLOs. Theoretical calculations show that Mg/S dual-ion multisite doping successfully reduces the energy levels of the TM 3d-O 2p and isolated O 2p orbitals, which effectively stabilizes the lattice oxygen. Therefore, multisite-doped samples exhibit promising electrochemical performance. This strategy provides a new approach to enhance the crystal structure stability of LLOs for the design of high-energy-density Li-ion batteries.

Slab gliding, a hidden factor that induces irreversibility and redox asymmetry of lithium-rich layered oxide cathodes

Lithium-rich layered oxides, despite their potential as high-energy-density cathode materials, are impeded by electrochemical performance deterioration upon anionic redox. Although this deterioration is believed to primarily result from structural disordering, our understanding of how it is triggered and/or occurs remains incomplete. Herein, we propose a theoretical picture that clarifies the irreversible transformation and redox asymmetry of lithium-rich layered oxides by introducing a series of global and local dynamic structural evolution processes involving slab gliding and transition-metal migration. We show that slab gliding plays a key role in trigger/initiating the structural disordering and consequent degradation of the anionic redox reaction. We further reveal that the 'concerted disordering mechanism' of slab gliding and transition-metal migration produces spontaneously irreversible/asymmetric lithiation and de-lithiation pathways, causing irreversible structural deterioration and the asymmetry of the anionic redox reaction. Our findings suggest slab gliding as a crucial, yet underexplored, method for achieving a reversible anionic redox reaction.

The Importance of Structural Uniformity and Chemical Homogeneity in Cobalt-Free Lithium Excess Nickel Manganese Oxide Cathodes

This study explores the relationships between material quench rate during processing and the resulting structural and electrochemical properties of Li[Ni_0.25 Li_0.167 Mn_0.583 ]O₂ . Samples of this lithium-rich material are prepared with highly contrasting postfiring cooling methods: a rapid water emersion quench or closed-door oven cooling. The contrasting approaches result in samples with different structural, chemical, and electrochemical behaviors; after cycling the rapidly quenched material yields greater capacity, greater stability, and initially lower, but more stable voltages than the slower cooled samples. Through the use of scanning tunneling electron microscopy, X-Ray Diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) it is demonstrated that rapidly quenched powders are more structurally uniform and chemically homogenous before cycling. By comparing these precycling sample to postcycling samples, it is then examined how this increased structural uniformity and chemical homogeneity leads to the superior electrochemical properties of the rapidly quenched samples.

Nb2O5 Coating to Improve the Cyclic Stability and Voltage Decay of Li-Rich Cathode Material for Lithium-Ion Battery

The commercialization of lithium manganese oxide (LMO) is seriously hindered by several drawbacks, such as low initial Coulombic efficiency, the degradation of the voltage and capacity during cycling, and the poor rating performance. Developing a simple and scalable synthesis for engineering with surface coating layers is significant and challenging for the commercial prospects of LMO oxides. Herein, we have proposed an efficient engineering strategy with a Nb₂O₅ coating layer. We dissolved niobate (V) ammonium oxalate hydrate and stoichiometric rich LMO (RLM) in deionized water and stirred constantly. Then, the target product was calcined at high temperature. The discharge capacity of the Nb₂O₅ coating RLM is increased from 195 mAh·g^-1 (the RLM without Nb₂O₅) to 215 mAh·g^-1 at a coating volume ratio of 0.010. The average voltage decay was 4.38 mV/cycle, which was far lower than the 7.50 mV/cycle for the pure LMO. The electrochemical kinetics results indicated that the performance was superior with the buffer engineering by the Nb₂O₅ coating of RLM, which provided an excellent lithium-ion conduction channel, and improved diffusion kinetics, capacity fading, and voltage decay. This reveals the strong potential of the Nb₂O₅ coating in the field of cathode materials for lithium-ion batteries.

Localizing Oxygen Lattice Evolutions Eliminates Oxygen Release and Voltage Decay in All-Mn-Based Li-Rich Cathodes

All-Mn-based Li-rich cathodes Li₂ MnO₃ have attracted extensive attention because of their cost advantage and ultrahigh theoretical capacity. However, the unstable anionic redox reaction (ARR), which involves irreversible oxygen releases, causes declines in cycling capacity and intercalation potential, thus hindering their practical applications. Here, it is proposed that introducing stacking-fault defects into the Li₂ MnO₃ can localize oxygen lattice evolutions and stabilize the ARR, eliminating oxygen releases. The thus-made cathode has a highly reversible capacity (320 mA h g^-1 ) and achieves excellent cycling stability. After 100 cycles, the capacity retention rate is 86% and the voltage decay is practically eliminated at 0.19 mV per cycle. Attributing to the stable ARR, samples show reduced stress-strain and phase transitions. Neutron pair distribution function (nPDF) measurements indicate that there is a structure response of localized oxygen lattice distortion to the ARR and the average oxygen lattice framework is well-preserved which is a prerequisite for the high cycle reversibility.

Regulation of Interfacial Lattice Oxygen Activity by Full-Surface Modification Engineering towards Long Cycling Stability for Co-Free Li-Rich Mn-Based Cathode

The construction of a protective layer for stabilizing anion redox reaction is the key to obtaining long cycling stability for Li-rich Mn-based cathode materials. However, the protection of the exposed surface/interface of the primary particles inside the secondary particles is usually ignored and difficult, let alone the investigation of the impact of the surface engineering of the internal primary particles on the cycling stability. In this work, an efficient method to regulate cycling stability is proposed by simply adjusting the distribution state of the boron nickel complexes coating layer. Theoretical calculation and experimental results display that the full-surface boron nickel complexes coating layer can not only passivate the activity of interface oxygen and improve its stability but also play the role of sharing voltage and protective layer to gradually activate the oxygen redox reaction during cycling. As a result, the elaborately designed cobalt-free Li-rich Mn-based cathode displays the highest discharge-specific capacity retentions of 91.1% after 400 cycles at 1 C and 94.3% even after 800 cycles at 5 C. In particular, the regulation strategy has well universality and is suitable for other high-capacity Li-rich cathode materials.

Accumulated Lattice Strain as an Intrinsic Trigger for the First-Cycle Voltage Decay in Li-Rich 3d Layered Oxides

Li- and Mn-rich layered oxides (LMLOs) are promising cathode materials for Li-ion batteries (LIBs) owing to their high discharge capacity of above 250 mA h g^-1. A high voltage plateau related to the oxidation of lattice oxygen appears upon the first charge, but it cannot be recovered during discharge, resulting in the so-called voltage decay. Disappearance of the honeycomb superstructure of the layered structure at a slow C-rate (e.g., 0.1 C) has been proposed to cause the first-cycle voltage decay. By comparing the structural evolution of Li[Li_0.2Ni_0.2Mn_0.6]O₂ (LLNMO) at various current densities, the operando synchrotron-based X-ray diffraction results show that the lattice strain in bulk LLNMO is continuously increased over cycling, resulting in the first-cycle voltage loss upon Li-ion insertion. Unlike the LLNMO, the accumulated average lattice strain of LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) and LiNi_0.6Co_0.2Mn_0.2O₂ (NCM622) from the open-circuit voltage to 4.8 V could be released on discharge. These findings help to gain a deep understanding of the voltage decay in LMLOs.

Highly Reversible Local Structural Transformation Enabled by Native Vacancies in O2-Type Li-Rich Layered Oxides with Anion Redox Activity

A novel O2-phase Li_1.033Ni_0.2[□_0.1Mn_0.5]O₂ cathode with native vacancies (denoted as "□") was delicately designed. By a combination of noninvasive ⁷Li pj-MATPASS NMR and electron paramagnetic resonance measurements, it is unequivocally shown that the reservation of native vacancies enables the fully reversible local structural transformation without the formation of Li in the Li layer (Li_tet) in Li_1.033Ni_0.2[□_0.1Mn_0.5]O₂ during the initial and subsequent cycling. In addition, the pernicious in-plane Mn migration that would result in the generation of trapped molecular O₂ is effectively mitigated in Li_1.033Ni_0.2[□_0.1Mn_0.5]O₂. As a result, the cycle stability of Li_1.033Ni_0.2[□_0.1Mn_0.5]O₂ is significantly enhanced compared to that of the vacancy-free Li_1.033Ni_0.2Mn_0.6O₂, showing an extraordinary capacity retention of 102.31% after 50 cycles at a rate of 0.1C (1C = 100 mA g^-1). This study defines an efficacious strategy for upgrading the structural stability of O2-type Li-rich layered oxide cathodes with reversible high-voltage anion redox activity.

On the disparity in reporting Li-rich layered oxide cathode materials

Lithium-rich layered oxides are considered one of the most promising cathode materials for next generation lithium-ion batteries due to their extraordinary specific capacity of over 280 mA h g^-1 and superior energy density of over 1000 W h kg^-1. Despite the excellent performance, LRLOs still suffer from low Coulombic efficiency, serious capacity/voltage decay upon cycling, voltage hysteresis, short lifespan, and poor rate capability. Driven by the thirst for high-energy-density battery technologies, various strategies have been developed to address these issues with great progress being achieved in the past several years. However, the emerging disparity among the published results severely precludes meaningful comparisons between different LRLOs and material modification strategies, which has become an impediment to the development and commercialization of LRLOs. Although the significance of standardization has been recognized in the battery community, the standardization of LRLOs is worth particular attention due to their complicated compositions and unique electrochemical properties. This perspective analyzes the underlying parameters that can cause varied and even controversial results observed in LRLOs, from the synthesis procedure to the electrochemical evaluation procedure, followed by preliminary suggestions for the standard protocols of chemical compositions, synthesis pathways, calcination conditions, electrode preparation, battery fabrication, and battery testing. Hopefully, this perspective can help build a reliable baseline for LRLO research, thus aligning the huge research effort toward the practical applications of LRLOs.

Oxygen Redox Activation at Initial Cycle to Improve Cycling Stability for the Na0.83Li0.12Ni0.22Mn0.66O2 System

Oxygen reactions are commonly used to increase the specific capacities of Na-ion batteries, especially for the Na_xLi_yTMO₂ systems. Previous research focused on improving the stabilities of oxygen reactions to enhance cycling stability. However, the effects of oxygen reactions on the distribution of Li ions in the transition metal (TM) and alkali metal (AM) layers for the Na-ion battery are relatively unexplored and rarely employed. In this study, we employ a layered P2-Na_0.83Li_0.12Ni_0.22Mn_0.66O₂ cathode to control the effects of the oxygen reactions on the distributions of Li ions in two layers. With oxygen-redox-activation-at-first-cycle (ORAFIC)-cycling, which cycled first within 2.0-4.6 V to activate oxygen redox and then cycled within 2.0-4.2 V, this cathode exhibited better cycling stability compared to low-voltage (LV)-cycling of 2.0-4.2 V and high-voltage (HV)-cycling of 2.0-4.6 V. Using nuclear magnetic resonance spectroscopy, electron paramagnetic resonance, inductively coupled plasma experiments, and X-ray diffraction, it is confirmed that ORAFIC-cycling stabilizes the crystal structure and distributions of Li ions in the TM and AM layers and reduces Li-ion loss, thus improving the cycling stability.

Inhibiting collective cation migration in Li-rich cathode materials as a strategy to mitigate voltage hysteresis

Lithium-rich cathodes are promising energy storage materials due to their high energy densities. However, voltage hysteresis, which is generally associated with transition metal migration, limits their energy efficiency and implementation in practical devices. Here we reveal that voltage hysteresis is related to the collective migration of metal ions, and that isolating the migration events from each other by creating partial disorder can create high-capacity reversible cathode materials, even when migrating transition metal ions are present. We demonstrate this on a layered Li-rich chromium manganese oxide that in its fully ordered state displays a substantial voltage hysteresis (>2.5 V) associated with collective transition metal migration into Li layers, but can be made to achieve high capacity (>360 mAh g^-1) and energy density (>1,100 Wh kg^-1) when the collective migration is perturbed by partial disorder. This study demonstrates that partially cation-disordered cathode materials can accommodate a high level of transition metal migration, which broadens our options for redox couples to those of mobile cations.

Unveiling the High-valence Oxygen Degradation Across the Delithiated Cathode Surface

Charge compensation on anionic redox reaction (ARR) has been promising to realize extra capacity beyond transition metal redox in battery cathodes. The practical development of ARR capacity has been hindered by high-valence oxygen instability, particularly at cathode surfaces. However, the direct probe of surface oxygen behavior has been challenging. Here, the electronic states of surface oxygen are investigated by combining mapping of resonant Auger electronic spectroscopy (mRAS) and ambient pressure X-ray photoelectron spectroscopy (APXPS) on a model LiCoO₂ cathode. The mRAS verified that no high-valence oxygen can sustain at cathode surfaces, while APXPS proves that cathode electrolyte interphase (CEI) layer evolves and oxidizes upon oxygen gas contact. This work provides valuable insights into the high-valence oxygen degradation mode across the interface. Oxygen stabilization from surface architecture is proven a prerequisite to the practical development of ARR active cathodes.

Stabilizing Cobalt-free Li-rich Layered Oxide Cathodes through Oxygen Lattice Regulation by Two-phase Ru Doping

The application of Li-rich layered oxides is hindered by their dramatic capacity and voltage decay on cycling. This work comprehensively studies the mechanistic behaviour of cobalt-free Li_1.2 Ni_0.2 Mn_0.6 O₂ and demonstrates the positive impact of two-phase Ru doping. A mechanistic transition from the monoclinic to the hexagonal behaviour is found for the structural evolution of Li_1.2 Ni_0.2 Mn_0.6 O_2, and the improvement mechanism of Ru doping is understood using the combination of in operando and post-mortem synchrotron analyses. The two-phase Ru doping improves the structural reversibility in the first cycle and restrains structural degradation during cycling by stabilizing oxygen (O^2- ) redox and reducing Mn reduction, thus enabling high structural stability, an extraordinarily stable voltage (decay rate <0.45 mV per cycle), and a high capacity-retention rate during long-term cycling. The understanding of the structure-function relationship of Li_1.2 Ni_0.2 Mn_0.6 O₂ sheds light on the selective doping strategy and rational materials design for better-performance Li-rich layered oxides.

Mitigation of Oxygen Evolution and Phase Transition of Li-Rich Mn-Based Layered Oxide Cathodes by Coating with Oxygen-Deficient Perovskite Compounds

Li-rich Mn-based layered oxide cathodes with a high discharge capacity hold great promise for high energy density lithium-ion batteries. However, application is hampered by voltage and capacity decay and gas evolution during cycling due to interfacial side reactions. Here, we report coating by oxygen-deficient perovskite La0.9Sr0.1CoO3 using the Pechini process. X-ray photoelectron spectroscopy and scanning transmission electron microscopy both exhibit a uniform coating layer with a high oxygen vacancy concentration. The coating effectively mitigates the first cycle irreversible capacity loss and voltage decay while increasing cyclability. Optimized coating improves capacity retention from 55.6% to 84.8% after 400 cycles at 2 C. Operando differential electrochemical mass spectroscopy shows that such a coating can significantly mitigate the release of oxygen and carbon dioxide. Electrochemical impedance spectroscopy and post-mortem analysis indicate that the coating layer forms a stable interface and restricts structure evolution and cation mixing during cycling, conferring these cathode materials with better cycling and voltage stability. The perovskite can be applied to other cathodes with high voltage and capacity to suppress interfacial side reactions toward developing stable high energy density batteries.

Iron Sulfide Na2 FeS2 as Positive Electrode Material with High Capacity and Reversibility Derived from Anion-Cation Redox in All-Solid-State Sodium Batteries

It is desirable for secondary batteries to have high capacities and long lifetimes. This paper reports the use of Na₂ FeS₂ with a specific structure consisting of edge-shared and chained FeS₄ as the host structure and as a high-capacity active electrode material. An all-solid-state sodium cell that uses Na₂ FeS₂ exhibits a high capacity of 320 mAh g^-1 , which is close to the theoretical two-electron reaction capacity of 323 mAh g^-1 , and operates reversibly for 300 cycles. The excellent electrochemical properties of all-solid-state sodium cells are derived from the anion-cation redox and rigid host structure during charging/discharging. In addition to the initial one-electron reaction of Na_x FeS₂ (1 ≤ x ≤ 2) activated Fe²⁺ /Fe³⁺ redox as the main redox center, the reversible sulfur redox further contributes to the high capacity. Although the additional sulfur redox affects the irreversible crystallographic changes, stable and reversible redox reactions are observed without capacity fading, owing to the local maintenance of the chained FeS₄ in the host structure. Sodium iron sulfide Na₂ FeS₂ , which combines low-cost elements, is one of the candidates that can meet the high requirements of practical applications.

Transition metal migration and O2 formation underpin voltage hysteresis in oxygen-redox disordered rocksalt cathodes

Lithium-rich disordered rocksalt cathodes display high capacities arising from redox chemistry on both transition-metal ions (TM-redox) and oxygen ions (O-redox), making them promising candidates for next-generation lithium-ion batteries. However, the atomic-scale mechanisms governing O-redox behaviour in disordered structures are not fully understood. Here we show that, at high states of charge in the disordered rocksalt Li₂MnO₂F, transition metal migration is necessary for the formation of molecular O₂ trapped in the bulk. Density functional theory calculations reveal that O₂ is thermodynamically favoured over other oxidised O species, which is confirmed by resonant inelastic X-ray scattering data showing only O₂ forms. When O-redox involves irreversible Mn migration, this mechanism results in a path-dependent voltage hysteresis between charge and discharge, commensurate with the hysteresis observed electrochemically. The implications are that irreversible transition metal migration should be suppressed to reduce the voltage hysteresis that afflicts O-redox disordered rocksalt cathodes.

The oxygen-redox mechanism in lithium-rich disordered rocksalt cathode materials is still not well understood. Here, the authors show that in Li₂MnO₂F, molecular oxygen forms in the bulk during charge and is re-incorporated into the structure as oxygen anions on discharge, but this process is associated with irreversible Mn migration, causing voltage hysteresis.

Stabilizing Layered Structure in Aqueous Electrolyte via O2-Type Oxygen Stacking

Despite the high energy density of O3-type layered cathode materials, the short cycle life in aqueous electrolyte hinders their practical applications in aqueous lithium-ion batteries (ALIBs). In this work, it is demonstrated that the structural stability of layered LiCoO₂ in aqueous electrolyte can be remarkably improved by altering the oxygen stacking from O3 to O2. As compared to the O3-type LiCoO₂ , the O2-type LiCoO₂ exhibits significantly improved cycle performance in neutral aqueous electrolyte. It is found that the structural degradation caused by electrophilic attack of proton can be effectively mitigated in O2-type layered structure. With O2 stacking, CoO₆ octahedra in LiCoO₂ possess stronger CoO bonds while Co migration from Co layer to Li layer is strongly hampered, resulting in enhanced structural stability against proton attack and prolonged cycle life in aqueous electrolyte. The findings in this work reveal that regulating oxygen stacking sequence is an effective strategy to improve the structural stability of layered materials for ALIBs.

Superstructure Control of Anionic Redox Behavior in Manganese-Based Cathode Materials for Li-Ion Batteries

Anionic charge compensation creates conditions for realizing high capacity and energy density of Li-ion batteries cathode materials. However, the issues of voltage hysteresis, capacity attenuation, and structure transformation caused by the labile anionic redox are still difficult to solve fundamentally. The superstructure formed by a Li-Mn ordered arrangement is the intrinsic reason to trigger the anionic charge compensation. In this work, manganese-based cathode materials with series of Li-Mn ordered superstructure types have been prepared by an ion exchange method, and superstructure control of the anionic redox behavior has been synthetically investigated. With the dispersion of a LiMn₆ superstructure unit, the aggregation of Li vacancies in Mn slab is gradually inhibited, which eliminates the production of O-O dimers and improves the reversibility of oxygen redox. Therefore, the voltage hysteresis and capacity fading have been significantly improved. Meanwhile, the amount of reactive oxygen species and their capacity contribution is reduced, and the sluggish electrochemical reaction kinetics of anion requires a low current density to boost the high-capacity advantage. This paper provides effective ideas for the design of various superstructures and the rational utilization of anionic redox.

The discovery of novel SNPs associated with group A soyasaponin biosynthesis from Korea soybean core collection

Soyasaponin is a type of glycoside such as steroids, steroidal alkaloids or triterpenes, which enhance the body immunity. In order to efficiently identify genes and markers related to the soyasaponin, we used a 180K Axiom® SoyaSNP array and whole genome resequencing data from the Korean soybean core collection. As a result of conducting GWAS for group A soyasaponin (Aa and Ab derivatives), 16 significant common markers associated with Aa and Ab derivatives were mapped to chromosome 7, and three candidate genes including Glyma.07g254600 were detected. The functional haplotypes for candidate genes showed that Aa and Ab contents were mainly determined by alleles of AX-90322128, the marker of Glyma.07g254600. In addition, 14 novel SNPs variants closely associated with Aa and Ab derivatives were discovered for Glyma.07g254600. Therefore, the results of this study that identified soyasaponin-associated markers and useful genes utilizing various genomic information could provide insight into functional soybean breeding.

Mitigating the Surface Reconstruction of Ni-Rich Cathode via P2-Type Mn-Rich Oxide Coating for Durable Lithium Ion Batteries

Ni-rich materials have received widespread attention as one of the mainstream cathodes in high-energy-density lithium-ion batteries for electric vehicles. However, Ni-rich cathodes suffer from severe surface reconstruction in a high delithiation state, constraining their rate capabilities and life span. Herein, a novel P2-type Na_xNi_0.33Mn_0.67O₂ (NNMO) is rationally selected as the surficial modification layer for LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) cathode, which undergoes a spontaneous Na⁺-Li⁺ exchange reaction to form an O2-type Li_xNi_0.33Mn_0.67O₂ (LNMO) layer revealed by combining X-ray diffraction and solid-state nuclear magnetic resonance techniques. Owing to the specific oxygen stacking sequence, O2-type LNMO significantly prevents the initial layered structure of NCM811 from transforming to the spinel or rock-salt phases during cycling, thus effectively maintaining the integral surficial structure and the Li⁺ diffusion channels of NCM811. Eventually, the NNMO@NCM811 electrode yields enhanced thermal stability, outstanding rate performance, and long cycling stability with 80% capacity retention after 294 cycles at 200 mA g^-1, and its life span is further extended to 531 cycles while enhancing the mechanical stability of the bulk material.