Thermally-Activated Shape Memory Behavior of Biodegradable Blends Based on Plasticized PLA and Thermoplastic Starch

Biodegradable blends based on plasticized poly(lactic acid) PLA and thermoplastic starch (TPS) have been obtained. The influence of the PLA plasticizer as a compatibility agent has been studied by using two different plasticizers such as neat oligomeric lactic acid (OLA) and functionalized with maleic acid (mOLA). In particular, the morphological, thermal, and mechanical properties have been studied as well as the shape memory ability of the melt-processed materials. Therefore, the influence of the interaction between different plasticizers and the PLA matrix as well as the compatibility between the two polymeric phases on the thermally-activated shape memory properties have been studied. It is very interesting to use the same additive able to act as both plasticizer and compatibilizer, decreasing the glass transition temperature of PLA to a temperature close to the physiological one, obtaining a material suitable for potential biomedical applications. In particular, we obtain that OLA-plasticized blend (oPLA/TPS) show very good thermally-activated capability at 45 °C and 50% deformation, while the blend obtained by using maleic OLA (moPLA/TPS) did not show shape memory behavior at 45 °C and 50% deformation. This fact is due to their morphological changes and the loss of two well-distinguished phases, one acting as fixed phase and the other one acting as switching phase to typically obtain shape memory response. Therefore, the thermally-activated shape memory results show that it is very important to make a balance between plasticizer and compatibilizer, considering the need of two well-established phases to obtain shape memory response.

Antimicrobial Efficacy of a Vegetable Oil Plasticizer in PVC Matrices

The growing prevalence of bacterial and viral infections, highlighted by the recent COVID-19 pandemic, urgently calls for new antimicrobial strategies. To this end, we have synthesized and characterized a novel fatty acid epoxy-ester plasticizer for polymers, named GDE. GDE is not only sustainable and user-friendly but also demonstrates superior plasticizing properties, while its epoxy components improve the heat stability of PVC-based matrices. A key feature of GDE is its ability to confer antimicrobial properties to surfaces. Indeed, upon contact, this material can effectively kill enveloped viruses, such as herpes simplex virus type 1 (HSV-1) and the β-coronavirus prototype HCoV-OC43, but it is ineffective against nonenveloped viruses like human adenovirus (HAdV). Further analysis using transmission electron microscopy (TEM) on HSV-1 virions exposed to GDE showed significant structural damage, indicating that GDE can interfere with the viral envelope, potentially causing leakage. Moreover, GDE demonstrates antibacterial activity, albeit to a lesser extent, against notorious pathogens such as Staphylococcus aureus and Escherichia coli. Overall, this newly developed plasticizer shows significant potential as an antimicrobial agent suitable for use in both community and healthcare settings to curb the spread of infections caused by microorganisms contaminating physical surfaces.

Water-Doped Brønsted Acidic Protic Ionic Liquids for Enhanced Tributyl Citrate Synthesis in a Two-Phase Esterification System

Tributyl citrate (TBC) plays a crucial role as a plasticizer, enhancing the flexibility of polymers such as polyvinyl chloride. Its biodegradability and non-toxic nature contribute to eco-friendly appeal, making it a preferred additive in diverse industries, including food packaging, medical devices, toys, and consumer goods. Herein, a method for the synthesis of TBC using inexpensive Brønsted acidic protic ionic liquids (ILs) in a two-phase reaction system is presented. The esterification process is carried out with high yield (>99 %), selectivity (up to 98 %) and short reaction time of 2 h. The catalyst in the form of IL shows excellent performance and stability, desirable for industrial applications.

First Insight into Fetal Exposure to Legacy and Emerging Plasticizers Revealed by Infant Hair and Meconium: Occurrence, Biotransformation, and Accumulation

Epidemiological studies have demonstrated the embryonic and developmental toxicity of plasticizers. Thus, understanding the in utero biotransformation and accumulation of plasticizers is essential to assessing their fate and potential toxicity in early life. In the present study, 311 infant hair samples and 271 paired meconium samples were collected at birth in Guangzhou, China, to characterize fetal exposure to legacy and emerging plasticizers and their metabolites. Results showed that most of the target plasticizers were detected in infant hair, with medians of 9.30, 27.6, and 0.145 ng/g for phthalate esters (PAEs), organic phosphate ester (OPEs), and alternative plasticizers (APs), and 1.44, 0.313, and 0.066 ng/g for the metabolites of PAEs, OPEs, and APs, respectively. Positive correlations between plasticizers and their corresponding primary metabolites, as well as correlations among the oxidative metabolites of bis(2-ethylhexyl) phthalate (DEHP) and 1,2-cyclohexane dicarboxylic acid diisononyl ester (DINCH), were observed, indicating that infant hair retained the major phase-I metabolism of the target plasticizers. While no positive correlations were found in parent compounds or their primary metabolites between paired infant hair and meconium, significant positive correlations were observed among secondary oxidative metabolites of DEHP and DINCH in hair and meconium, suggesting that the primary metabolites in meconium come from hydrolysis of plasticizers in the fetus but most of the oxidative metabolites come from maternal-fetal transmission. The parent compound/metabolite ratios in infant hair showed a decreasing trend across pregnancy, suggesting in utero accumulation and deposition of plasticizers. To the best of our knowledge, this study is the first to report in utero exposure to both parent compounds and metabolites of plasticizers by using paired infant hair and meconium as noninvasive biomonitoring matrices and provides novel insights into the fetal biotransformation and accumulation of plasticizers across pregnancy.

Ascorbic Acid Induced the Improved Oxygen Vacancy Defects of Bi4O5Br2 and Its Application on Photoelectrochemical Detection of DNA Demethylase MBD2 with Improved Detection Sensitivity

Oxygen vacancy defects (OVs) are one of the main strategies for nanomaterials modification to improve the photoactivity, but current methods for fabricating OVs are usually complicated and harsh. It is important to develop simple, rapid, safe, and mild methods to fabricate OVs. By studying the effects of different weak reducing agents, the concentration of the reducing agent and the reaction time on fabrication of OVs, it is found that L-ascorbic acid (AA) gently and rapidly induces the increase of OVs in Bi4O5Br2 at room temperature. The increased OVs not only improve the adsorption of visible light, but also enhance the photocurrent response. Based on this, the preparation of OVs in Bi4O5Br2 is employed to the development of a photoelectrochemical biosensor for the detection of DNA demethylase of methyl-CpG binding domain protein 2 (MBD2). The biosensor shows a wide linear range of 0.1-400 ng mL-1 and a detection limit as low as 0.03 ng mL-1 (3σ). In addition, the effect of plasticizers on MBD2 activity is evaluated using this sensor. This work not only provides a novel method to prepare OVs in bismuth rich materials, but also explores a new novel evaluation tool for studying the ecotoxicological effects of contaminants.

Physicochemical and ecotoxicological approaches for Moknine Continental Sebkha in Tunisia

Degradation of water quality is an emerging issue in many developing countries. In this context, industrial and domestic effluents heavily contaminate the coast of Moknine Continental Sebkha in Tunisia. The present study aimed to biomonitor the seawater quality of the Moknine Continental Sebkha coast using physicochemical and ecotoxicological approaches. The ecotoxicological assessment was performed using three species representing different trophic levels, namely Vibrio fischeri, Selenastrum capricornutum, and Lepidium sativum. In the physicochemical analysis such as BOD (biochemical oxygen demand), COD (chemical oxygen demand), TSS (total suspended solids), TOC (total organic carbon), NO3- (nitrate), AOX (adsorbable organic halogen), the recorded levels of pH and total suspended solids did not comply with the Tunisian standard (NT.09.11/1983). The ecotoxicological data confirmed that the tested water samples displayed toxicity to two test indicators L. sativum and S. capricornutum. A targeted chemical screening of the Moknine Continental Sebkha coast previously performed revealed the presence of total mercury, four phthalate acid esters, and one non-phthalate plasticizer, a fact that could explain the observed ecotoxicological effects and therefore might harm the biotic area and the health of the surrounding population.

Neurotoxicity of Benzotriazole Ultraviolet Stabilizers in Teleost Fishes: A Review

Plastic additives that maintain integrity have been extensively studied for potential toxicity to fish; however, chemicals that protect polymers from (artificial) UV degradation are less studied. Benzotriazole UV stabilizers (BUVSs) are the most widely used UV stabilizers in plastics and are often used in sunscreens, cosmetics, paint, and food packaging. BUVSs can negatively affect aquatic wildlife when released into the environment via plastic degradation. In this review, we summarize the distribution of BUVSs globally and discuss neurotoxicological endpoints measured in fish to understand how these plastic additives can affect the neurological health of teleost fishes. BUVSs have been detected in aquatic environments at concentrations ranging from 0.05 up to 99,200 ng/L. Studies show that BUVSs affect behavioral responses and acetylcholinesterase activity, indicators of neurotoxicity. Our computational analysis using transcriptome data suggests certain pathways associated with neurodegeneration are responsive to exposure to BUVSs, like "Complement Activation in Alzheimer's Disease". Based on our review, we identify some research needs for future investigations: (1) molecular studies in the central nervous system to define precise mechanisms of neurotoxicity; (2) a wider range of tests for assessing aberrant behaviors given that BUVSs can affect the activity of larval zebrafish; and (3) histopathology of the nervous system to accompany biochemical analyses. These data are expected to enhance understanding of the neurotoxicity potential of benzotriazoles and other plastic additives.

Legacy and Emerging Plasticizers and Stabilizers in PVC Floorings and Implications for Recycling

Hazardous chemicals in building and construction plastics can lead to health risks due to indoor exposure and may contaminate recycled materials. We systematically sampled new polyvinyl chloride floorings on the Swiss market (n = 151). We performed elemental analysis by X-ray fluorescence, targeted and suspect gas chromatography-mass spectrometry analysis of ortho-phthalates and alternative plasticizers, and bioassay tests for cytotoxicity and oxidative stress, and endocrine, mutagenic, and genotoxic activities (for selected samples). Surprisingly, 16% of the samples contained regulated chemicals above 0.1 wt %, mainly lead and bis(2-ethylhexyl) phthalate (DEHP). Their presence is likely related to the use of recycled PVC in new flooring, highlighting that uncontrolled recycling can delay the phase-out of hazardous chemicals. Besides DEHP, 29% of the samples contained other ortho-phthalates (mainly diisononyl and diisodecyl phthalates, DiNP and DiDP) above 0.1 wt %, and 17% of the samples indicated a potential to cause biological effects. Considering some overlap between these groups, they together make up an additional 35% of the samples of potential concern. Moreover, both suspect screening and bioassay results indicate the presence of additional potentially hazardous substances. Overall, our study highlights the urgent need to accelerate the phase-out of hazardous substances, increase the transparency of chemical compositions in plastics to protect human and ecosystem health, and enable the transition to a safe and sustainable circular economy.

First Evidence of Hindered Amine Light Stabilizers As Abundant, Ubiquitous, Emerging Pollutants in Dust and Air Particles: A New Concern for Human Health

Hindered amine light stabilizers (HALSs) represent a crucial class of polymer additives that are extensively used in plastics and other polymeric materials. However, their environmental presence and related exposure risks have until now remained unexplored. This study addressed this critical knowledge by examining dust and air particles collected in South China, utilizing a comprehensive analytical approach to identify and quantify nine monomeric HALSs. A total of seven of the nine studied HALSs were detected in the samples, with bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate (Tinuvin 770) and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate (HS-508) identified as the most abundant and widespread pollutants. Median total concentrations of HALSs ranged from 417 to 8,830 ng/g in urban dust samples and from 28.6 to 70.9 pg/m3 in urban air particles. Notably, dust concentrations of HALSs significantly exceeded those of traditional well-known light stabilizers such as UV absorbers. Human exposure assessment indicated that in contrast to air inhalation dust ingestion represented a more substantial exposure pathway owing to the relatively low volatility of these newly identified chemicals. Predictive modeling suggests that many of the examined HALSs exhibited characteristics of persistence, high toxicity, or strong potential for long-range transport, underscoring their hazardous nature. This study represents the first comprehensive investigation into the prevalence of HALSs as a class of emerging pollutants widespread in the environment, necessitating heightened attention and further research in the future.

Impact of phthalate metabolites on vitamin D levels and subclinical inflammation: national health and nutrition examination survey, 2013-2018

This study explores the association between phthalates and total vitamin D levels and the link between phthalates exposure and subclinical inflammation using monocyte percentage to high-density lipoprotein cholesterol ratio (MHR), utilizing three National Health and Nutrition Examination Survey (NHANES) survey cycles 2013-2018. This study is cross-sectional, utilizing one-time urine samples from randomly selected NHANES participants to assess phthalate metabolites. An inverse association between vitamin D and all Di(2-ethylhexyl) phthalate (DEHP) metabolites was found. The molar sum of DEHP metabolites was inversely associated with vitamin D (β -2.329; 95% CI -3.937,-0.720). An inverse association was observed between monocarboxynonyl phthalate and vitamin D (β -0.0278; 95% CI -0.0527,-0.00298). A similar relationship was found between monocarboxyoctyl phthalate and vitamin D (β -0.0160; 95% CI -0.0242,-0.00775). There was no association between phthalate metabolites and MHR. Stratified analysis showed that the association between phthalate metabolites and MHR may vary according to vitamin D status.

Assessment of Daily Exposure to Organophosphate Esters through PM2.5 Inhalation, Dust Ingestion, and Dermal Contact

Inhalation of airborne fine particulate matter (PM2.5), dust ingestion, and dermal contact with dust are important pathways for human exposure to different contaminants, such as organophosphate esters (OPE), compounds that are widely used as flame retardants and plasticizers. There are limited studies assessing the extent of the contamination of OPE in indoor airborne PM2.5. This study offers a novel approach by examining various indoor environments, such as homes, workplaces, and means of transport, where people typically spend their daily lives. The goal is to provide a comprehensive assessment of daily exposure to these pollutants. Both PM2.5 and dust samples were collected in order to determine the concentration levels of 17 different OPEs. Fifteen OPEs in PM2.5 and 16 in dust samples were detected. Concentration levels in indoor air ranged from 4.37 to 185 ng/m3 (median 24.4 ng/m3) and from 3.02 to 36.9 μg/g for the dust samples (median 10.2 μg/g). Estimated daily intakes (EDIs) of OPEs were calculated for adults, yielding median values of 3.97 ng/(kg bw × day) for EDIInhalation, 5.89 ng/(kg bw × day) for EDIDermal, and 1.75 ng/(kg bw × day) for EDIIngestion. Such levels lie below human health threshold risk limits, although in some cases they could be only 2 times below the threshold for carcinogenic risk, with a main contribution from tris(2-chloroethyl) phosphate (TCEP). Given this threshold proximity, additional exposure to these chemicals from other pathways, such as food ingestion, gas phase exposure, and/or inhalation of coarser particles (PM10-2.5), could therefore lead to health limit exceedances.

Plastic, It's What's for Dinner: A Preliminary Comparison of Ingested Particles in Bottlenose Dolphins and Their Prey

Microplastic ingestion was reported for common bottlenose dolphins (Tursiops truncatus) inhabiting Sarasota Bay, FL, USA, a community that also has prevalent exposure to plasticizers (i.e., phthalates) at concentrations higher than human reference populations. Exposure sources are currently unknown, but plastic-contaminated prey could be a vector. To explore the potential for trophic exposure, prey fish muscle and gastrointestinal tract (GIT) tissues and contents were screened for suspected microplastics, and particle properties (e.g., color, shape, surface texture) were compared with those observed in gastric samples from free-ranging dolphins. Twenty-nine fish across four species (hardhead catfish, Ariopsis felis; pigfish, Orthopristis chrysoptera; pinfish, Lagodon rhomboides; and Gulf toadfish, Opsanus beta) were collected from Sarasota Bay during September 2022. Overall, 97% of fish (n = 28) had suspected microplastics, and GIT abundance was higher than muscle. Fish and dolphin samples contained fibers and films; however, foams were common in dolphin samples and not observed in fish. Suspected tire wear particles (TWPs) were not in dolphin samples, but 23.1% and 32.0% of fish muscle and GIT samples, respectively, contained at least one suspected TWP. While some similarities in particles were shared between dolphins and fish, small sample sizes and incongruent findings for foams and TWPs suggest further investigation is warranted to understand trophic transfer potential.

Investigation of potential migratables from paper and board food contact materials

Since the ban on single-use plastic articles in Europe, the food contact material (FCM) industry has been forced to move to more sustainable alternatives. Paper and board FCM are convenient alternatives but must be safe for consumers. This study aims to investigate potential migrations of various substances (e.g., plasticizers, photoinitiators, primary aromatic amines, mineral oil, and bisphenols) from straws and takeaway articles made of paper and board. Twenty straws and fifty-eight takeaway articles were carefully selected and investigated using liquid and gas chromatography coupled with tandem mass spectrometry or flame ionization detector. Fourteen substances of all the targeted categories were found in takeaway articles, including seven plasticizers, two photoinitiators, one primary aromatic amine, two bisphenols, and the saturated and aromatic fraction of mineral oil (MOSH and MOAH, respectively). In straws, fewer substances were detected, i.e., six substances, including three plasticizers, one photoinitiator, MOSH, and MOAH. At least one of the target substances was detected in 88% of the samples, demonstrating the importance of further evaluation of these materials. Finally, the associated risks were assessed, highlighting the potential risks for several types of articles regarding bisphenol A, one primary aromatic amine (3.3-DMB), and MOSH and MOAH.

Biological Impact of Organic Extracts from Urban-Air Particulate Matter: An In Vitro Study of Cytotoxic and Metabolic Effects in Lung Cells

Atmospheric particulate matter (PM) with diameters below 10 µm (PM10) may enter the lungs through inhalation and are linked to various negative health consequences. Emergent evidence emphasizes the significance of cell metabolism as a sensitive target of PM exposure. However, the current understanding of the relationship between PM composition, conventional toxicity measures, and the rewiring of intracellular metabolic processes remains limited. In this work, PM10 sampled at a residential area (urban background, UB) and a traffic-impacted location (roadside, RS) of a Portuguese city was comprehensively characterized in terms of polycyclic aromatic hydrocarbons and plasticizers. Epithelial lung cells (A549) were then exposed for 72 h to PM10 organic extracts and different biological outcomes were assessed. UB and RS PM10 extracts dose-dependently decreased cell viability, induced reactive oxygen species (ROS), decreased mitochondrial membrane potential, caused cell cycle arrest at the G0/G1 phase, and modulated the intracellular metabolic profile. Interestingly, the RS sample, richer in particularly toxic PAHs and plasticizers, had a greater metabolic impact than the UB extract. Changes comprised significant increases in glutathione, reflecting activation of antioxidant defences to counterbalance ROS production, together with increases in lactate, NAD+, and ATP, which suggest stimulation of glycolytic energy production, possibly to compensate for reduced mitochondrial activity. Furthermore, a number of other metabolic variations hinted at changes in membrane turnover and TCA cycle dynamics, which represent novel clues on potential PM10 biological effects.

Influence of phthalate and non-phthalate plasticizers on reproductive endocrine system-related gene expression profiles in Japanese medaka (Oryzias latipes)

Plasticizers containing phthalates have the potential to alter endocrine function in vertebrates. While non-phthalate plasticizers were previously considered to be environmentally friendly and safe, our research team discovered that bis-(2-ethylhexyl) adipate (DEHA) and acetyl tributyl citrate (ATBC) disrupt thyroid hormones in Japanese medaka (Oryzias latipes). We assessed reproductive- and estrogen-responsive gene expression patterns in Japanese medaka to determine whether the phthalate plasticizers bis-(2-ethylhexyl) phthalate (DEHP, positive control) and the non-phthalate plasticizers DEHA and ATBC disrupt endocrine signaling. The results showed that the levels of choriogenin H (chgH) and vitellogenin (vtg) genes increased after exposure to DEHP and ATBC, suggesting that these plasticizers may have estrogenic activity. Exposure to DEHP and DEHA resulted in the upregulation of kisspeptin (kiss), gonadotropin-releasing hormone (gnrh), and follicle-stimulating hormone beta (fshβ) genes, suggesting that these plasticizers may interfere with reproductive function. To the best of our knowledge, this is the first study to demonstrate that the non-phthalate plasticizers DEHA and ATBC can disrupt reproduction-related hormonal activity in fish.

Nuclear Receptors-Mediated Endocrine Disrupting Effects of Non-Phthalate Plasticizers: A Review

In 2021, the global market for non-phthalate plasticizers reached $3.1 billion, and it is projected to grow by 25.8% by 2025. These plasticizers have gained substantial attention as substitutes for phthalates in various industrial applications due to their potential health and environmental risks, particularly in agroecosystems where they have emerged as contaminants. Furthermore, recent studies have demonstrated that non-phthalate plasticizers can exert endocrine-disrupting effects through mechanisms mediated by nuclear receptors. This review aims to summarize the present understanding of the molecular mechanisms by which non-phthalate plasticizers modulate the activity of nuclear receptors, including estrogen receptor, androgen receptor, glucocorticoid receptor, and peroxisome proliferator-activated receptors. Furthermore, the potential health impacts of exposure to conventional phthalate plasticizers are discussed, with a particular emphasis on developmental and reproductive toxicity, metabolic disorders, and carcinogenesis. Overall, this review underscores the significance of evaluating the endocrine-disrupting effects of non-phthalate plasticizers and lays the foundation for the development of safer alternatives within the plastic industry.

Biomass-Derived Levulinic Acid and Their Environmental Impact Assessment by LCA Methodology

This work is focused on the application of Life Cycle Assessment (LCA) methodology for the quantification of the potential environmental impacts associated with the obtainment of levulinic acid from residual Cynara cardunculus L. biomass and its subsequent valorization in innovative bioplasticizers for tuning the properties as well as the processability of biopolymers. This potentially allows the production of fully biobased and biodegradable bioplastic formulations, thus addressing the issues related to the fossil origin and nonbiodegradability of conventional additives, such as phthalates. Steam explosion pretreatment was applied to the epigean residue of C. cardunculus L. followed by a microwave-assisted acid-catalyzed hydrolysis. After purification, the as-obtained levulinic acid was used to synthesize different ketal-diester derivatives through a three-step selective synthesis. The levulinic acid-base additives demonstrated remarkable plasticizing efficiency when added to biobased plastics. The LCA results were used in conjunction with those from the experimental activities to find the optimal compromise between environmental impacts and mechanical and thermal properties, induced by the bioadditives in poly(3-hydroxybutyrate), PHB biopolymer.

International Comparison, Risk Assessment, and Prioritisation of 26 Endocrine Disrupting Compounds in Three European River Catchments in the UK, Ireland, and Spain

Endocrine-disrupting compounds (EDCs) constitute a wide variety of chemistries with diverse properties that may/can pose risks to both humans and the environment. Herein, a total of 26 compounds, including steroids, flame retardants, and plasticizers, were monitored in three major and heavily urbanized river catchments: the R. Liffey (Ireland), the R. Thames (UK), and the R. Ter (Spain), by using a single solid-phase extraction liquid chromatography-mass spectrometry (SPE-LC-MS/MS) method. Occurrence and frequency rates were investigated across all locations over a 10-week period, with the highest concentration obtained for the flame retardant tris(2-chloroethyl) phosphate (TCEP) at 4767 ng∙L-1 in the R. Thames in Central London. Geographical variations were observed between sites and were partially explained using principal component analysis (PCA) and hierarchical cluster analysis (HCA). In particular, discrimination between the R. Ter and the R. Thames was observed based on the presence and concentration of flame retardants, benzotriazole, and steroids. Environmental risk assessment (ERA) across sites showed that caffeine, a chemical marker, and bisphenol A (BPA), a plasticizer, were classified as high-risk for the R. Liffey and R. Thames, based on relative risk quotients (rRQs), and that caffeine was classified as high-risk for the R. Ter, based on RQs. The total risks at each location, namely ΣRQriver, and ΣrRQriver, were: 361, 455, and 723 for the rivers Liffey, Thames, and Ter, respectively. Caffeine, as expected, was ubiquitous in all 3 urban areas, though with the highest RQ observed in the R. Ter. High contributions of BPA were also observed across the three matrices. Therefore, these two compounds should be prioritized independently of location. This study represents a comprehensive EDC monitoring comparison between different European cities based on a single analytical method, which allowed for a geographically independent ERA prioritization to be performed.

Evaluation of Biocompatibility of PLA/PHB/TPS Polymer Scaffolds with Different Additives of ATBC and OLA Plasticizers

One of the blends that is usable for 3D printing while not being toxic to cell cultures is the lactic acid (PLA)/polyhydroxybutyrate (PHB)/thermoplastic starch (TPS) blend. The addition of plasticizers can change the rate of biodegradation and the biological behavior of the material. In order to evaluate the potential of the PLA/PHB/TPS material in combination with additives (plasticizers: acetyl tributyl citrate (ATBC) and oligomeric lactic acid (OLA)), for use in the field of biomedical tissue engineering, we performed a comprehensive in vitro characterization of selected mixture materials. Three types of materials were tested: I: PLA/PHB/TPS + 25% OLA, II: PLA/PHB/TPS + 30% ATBC, and III: PLA/PHB/TPS + 30% OLA. The assessment of the biocompatibility of the materials included cytotoxicity tests, such as monitoring the viability, proliferation and morphology of cells and their deposition on the surface of the materials. The cell line 7F2 osteoblasts (Mus musculus) was used in the experiments. Based on the test results, the significant influence of plasticizers on the material was confirmed, with their specific proportions in the mixtures. PLA/PHB/TPS + 25% OLA was evaluated as the optimal material for biocompatibility with 7F2 osteoblasts. The tested biomaterials have the potential for further investigation with a possible change in the proportion of plasticizers, which can have a fundamental impact on their biological properties.

Exploring the Potential of Seaweed Derivatives for the Development of Biodegradable Plastics: A Comparative Study

Biodegradable films made from biopolymer materials have the potential to replace conventional plastics, which can reduce waste disposal problems. This study aims to explore the potential of different seaweed derivate films consisting of 2% (w/w) of kappaphycus alverezi (KA), kappa carrageenan (KC), refined carrageenan (RC) and semi-refined carrageenan (SRC) as bio-based materials with 0.9% (w/w) glycerol (G), and reinforced with different concentrations of cellulose nanofibers (CNFs) derived from palm waste. A characterization of the glycerol-plasticized seaweed derivatives containing 0, 5, 10, and 15% (v/w) cellulose nanofiber is carried out. The CNFs were studied based on their mechanical, physical and thermal properties including mechanical properties, thickness, moisture content, opacity, water solubility, water vapor permeability and thermal stability. The hydrogen bonding was determined using the DFT calculation generated by Gauss view software version 9.6. The KA + G + 10%CNF film exhibited a surface with slight cracks, roughness, and larger lumps and dents, resulting in inferior mechanical properties (18.50 Mpa), making it unsuitable for biofilm production. The KC + G + 10%CNF film exhibited mechanical properties 24.97 Mpa and water vapor permeability of 1.42311 × 10^-11 g s^-1 m^-1 Pa^-1. The RC/G/10%CNF film displayed the highest TS (48.23 MPa) and water vapor permeability (1.4168 × 10^-11 g s^-1 m^-1 Pa^-1), but it also had higher solubility in water (66%). In contrast, the SRC + G + 10%CNF film demonstrated excellent mechanical properties (45.98 MPa), low water solubility (42.59%), low water vapor permeability (1.3719 × 10^-11 g s^-1 m^-1 Pa^-1), and a high decomposition temperature (250.62 °C) compared to KA, KC and RC. These attributes develop films suitable for various applications, including food packaging with enhanced properties and stability.

Further Step in the Transition from Conventional Plasticizers to Versatile Bioplasticizers Obtained by the Valorization of Levulinic Acid and Glycerol

In the last two decades, the use of phthalates has been restricted worldwide due to their well-known toxicity. Nonetheless, phthalates are still widely used for their versatility, high plasticization effect, low cost, and lack of valuable alternatives. This study presents the fully bio-based and versatile glycerol trilevulinate plasticizer (GT) that was obtained by the valorization of glycerol and levulinic acid. The mild-conditions and solvent-free esterification used to synthesize GT was optimized by investigating the product by Fourier transform infrared and NMR spectroscopy. An increasing content of GT, from 10 to 40 parts by weight per hundred parts of resin (phr), was tested with poly(vinyl chloride), poly(3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(lactic acid), and poly(caprolactone), which typically present complicated processability and/or mechanical properties. GT produced a significant plasticization effect on both amorphous and semicrystalline polymers, reducing their glass-transition temperature and stiffness, as observed by differential scanning calorimetry measurements and tensile tests. Remarkably, GT also decreased both the melting temperature and crystallinity degree of semicrystalline polymers. Furthermore, GT underwent enzyme-mediated hydrolysis to its initial constituents, envisioning a promising prospective for environmental safety and upcycling. Furthermore, 50% inhibitory concentration (IC₅₀) tests, using mouse embryo fibroblasts, proved that GT is an unharmful alternative plasticizer, which makes it potentially applicable in the biomedical field.

The Relationship between Phthalates and Diabetes: A Review

Since the beginning of their production, in the 1930s, phthalates have been widely used in the plastics industry to provide durability and elasticity to polymers that would otherwise be rigid, or as solvents in hygiene and cosmetic products. Taking into account their wide range of applications, it is easy to understand why their use has been increasing over the years, making them ubiquitous in the environment. This way, all living organisms are easily exposed to these compounds, which have already been classified as endocrine disruptor compounds (EDC), affecting hormone homeostasis. Along with this increase in phthalate-containing products, the incidence of several metabolic diseases has also been rising, namely diabetes. That said, and considering that factors such as obesity and genetics are not enough to explain this substantial increase, it has been proposed that the exposure to environmental contaminants may also be a risk factor for diabetes. Thus, the aim of this work is to review whether there is an association between the exposure to phthalates and the development of the several forms of diabetes mellitus, during pregnancy, childhood, and adulthood.

Reproductive toxicity of emerging plasticizers, flame retardants, and bisphenols, using culture of the rat fetal testis†

The use of bis (2-ethylhexyl) phthalate (DEHP), 2,2'4,4'-tetrabromodiphenyl ether (BDE47), and bisphenol A (BPA), as plasticizers, flame retardants, and epoxy resins, respectively, has been regulated due to their endocrine disrupting activities. Replacements for these chemicals are found in human matrices, yet the endocrine disrupting potential of these emerging contaminants is poorly characterized. We compared the effects of legacy chemicals with those of their replacements using fetal rat testis organ culture. Fetal testes sampled at gestation day 15 were grown ex vivo, and the impact was evaluated after a 3-day exposure to 10 μM of each legacy chemical; two BPA analogs (bisphenol M and bisphenol TMC); three replacements for DEHP/MEHP (2,2,4-trimethyl-1,3-pentanediol diisobutyrate, diisononyl-phthalate, and diisodecyl adipate); or two replacements for BDE47 (tributoxyethyl phosphate and isopropylated triphenyl phosphate). We showed that only BPA and MEHP significantly decrease testosterone secretions after 24 h, while BPM and BPTMC have the opposite effect. Luteinizing hormone-stimulated testosterone was reduced by BPA and MEHP but was increased by BPTMC. After exposure, testes were used for immunofluorescent staining of germ cells, Sertoli cells, and Leydig cells. Interestingly, exposures to BPM or BPTMC induced a significant increase in the Leydig cell density and surface area. A decrease in germ cell density was observed only after treatment with MEHP or BDE47. MEHP also significantly decreased Sertoli cell proliferation. These studies show that some replacement chemicals can affect testicular function, while others appear to show little toxicity in this model. These findings provide essential information regarding the need for their regulation.

Endocrine-Disrupting Chemicals and Persistent Organic Pollutants in Infant Formulas and Baby Food: Legislation and Risk Assessments

Human milk is the healthiest option for newborns, although, under specific circumstances, infant formula is a precious alternative for feeding the baby. Except for the nutritional content, infant formulas and baby food must be pollutant-free. Thus, their composition is controlled by continuous monitoring and regulated by establishing upper limits and guideline values for safe exposure. Legislation differs worldwide, although there are standard policies and strategies for protecting vulnerable infants. This work presents current regulations and directives for restricting endocrine-disrupting chemicals and persistent organic pollutants in infant formulas. Risk assessment studies, which are limited, are necessary to depict exposure variations and assess the health risks for infants from dietary exposure to pollutants.

Unveiling the Hidden Properties of Tomato Peels: Cutin Ester Derivatives as Bio-Based Plasticizers for Polylactic Acid

Polylactic acid (PLA) is one of the most important biopolymers employed on the market due to its good mechanical strength and barrier properties. On the other hand, this material presents a rather low flexibility, limiting its employment. The valorization of bio-based agro-food waste for the modification of bioplastics is a highly appealing approach for the replacement of petrol-based materials. The aim of this work is to employ cutin fatty acids derived from a biopolymer (i.e., cutin), present in waste tomato peels and its bio-based derivatives as new plasticizers to enhance PLA flexibility. In particular, pure 10,16-dihydroxy hexadecanoic acid was extracted and isolated from tomato peels and then functionalized to give the desired compounds. All the molecules developed in this study were characterized by NMR and ESI-MS. Blends at different concentrations (10, 20, 30, and 40% w/w) the flexibility (T_g measurements with differential scanning calorimetry-DSC) of the final material. Furthermore, the physical behavior of two blends obtained by mechanical mixing of PLA and 16-methoxy,16-oxohexadecane-1,7-diyl diacetate was investigated through thermal and tensile tests. The data collected by DSC show a lowering in the T_g of all the blends of PLA with functionalized fatty acids, in comparison with pure PLA. Lastly, the tensile tests highlighted how PLA blended with 16-methoxy,16-oxohexadecane-1,7-diyl diacetate (20% w/w) can efficiently enhance its flexibility.

Occurrence of phthalates in different food matrices: A systematic review of the main sources of contamination and potential risks

This systematic review aimed to investigate the occurrence of phthalates (phthalic acid esters [PAEs]) in different food matrices, as well as report the main sources of PAEs in food, the potential risks to the population, and the factors that influence its migration from food contact materials (FCMs) to food. Nineteen PAEs were identified, including di-(2-ehtylhexyl) phthalate (DEHP), dibutyl-phthalate (DBP), benzylbutyl phthalate (BBP), diisononyl phthalate (DINP), and diisodecyl phthalate (DIDP) in fruits and vegetables, milk and dairy products, cereals, meat, fish, fat and oils, snacks, condiments and sauces, miscellaneous, and baby food. Fifty-seven values of PAEs were above the legal limits of countries. DEHP is the PAE with the highest incidence, with maximum concentrations above the specific migration limit (SML) for milk and dairy products, oils and fats, fish, cereals, condiments and sauces, meat, and fruits and vegetables. The risk of exceeding the tolerable daily intake (TDI) was high for DEHP and DBP in fish, fat and oils, cereals, and milk and dairy products for children and adults. Fat and oils are the most critical food for DEHP, DBP, BBP, and DINP. Comparing the estimated daily intake (EDI) with the TDI, there was a risk for "milk and dairy products" in adults and for "cereal and cereal products" in children concerning DEHP. "Cereal and cereal products" presented a risk in children and adults concerning DBP. The "fat and oils" category presented a risk in children and adults about DBP and DINP. Temperature, contact time between food and the FCM, fat percent, and acidity positively correlate with the PAE's migration. The contamination occurs in many steps of the production chain.

Advances in green solvents for production of polysaccharide-based packaging films: Insights of ionic liquids and deep eutectic solvents

The problems with plastic materials and the good film-forming properties of polysaccharides motivated research in the development of polysaccharide-based films. In the last 5 years, there has been an explosion of publications on using green solvents, including ionic liquids (ILs), and deep eutectic solvents (DESs) as candidates to substitute the conventional solvents/plasticizers for preparations of desired polysaccharide-based films. This review summarizes related properties and recovery of ILs and DESs, a series of green preparation strategies (including pretreatment solvents/reaction media, ILs/DESs as components, extraction solvents of bioactive compounds added into films), and inherent properties of polysaccharide-based films with/without ILs and DESs. Major reported advantages of these new solvents are high dissolving capacity of certain ILs/DESs for polysaccharides (i.e., up to 30 wt% for cellulose) and better plasticizing ability than traditional plasticizers. In addition, they frequently display intrinsic antioxidant and antibacterial activities that facilitate ILs/DESs applications in the processing of polysaccharide-based films (especially active food packaging films). ILs/DESs in the film could also be further recycled by water or ethanol/methanol treatment followed by drying/evaporation. One particularly promising approach is to use bioactive cholinium-based ILs and DESs with good safety and plasticizing ability to improve the functional properties of prepared films. Whole extracts by ILs/DESs from various byproducts can also be directly used in films without separation/polishing of compounds from the extracting agents. Scaling-up, including costs and environmental footprint, as well as the safety and applications in real foods of polysaccharide-based film with ILs/DESs (extracts) deserves more studies.

Monitoring Moroccan Honeys: Physicochemical Properties and Contamination Pattern

The physicochemical traits and an array of organic and inorganic contaminants were monitored in monofloral honeys (i.e., jujube [Ziziphus lotus], sweet orange [Citrus sinensis], PGI Euphorbia [Euphorbia resinifera] and Globularia alyphum) from the Moroccan Béni Mellal-Khénifra region (i.e., Khénifra, Beni Méllal, Azlal and Fquih Ben Salah provinces). Moroccan honeys were in line with the physicochemical standards set by the European Union. However, a critical contamination pattern has been outlined. In fact, jujube, sweet orange, and PGI Euphorbia honeys contained pesticides, such as acephate, dimethoate, diazinon, alachlor, carbofuran and fenthion sulfoxide, higher than the relative EU Maximum Residue Levels. The banned 2,3',4,4',5-pentachlorobiphenyl (PCB118) and 2,2',3,4,4',5,5'-heptachlorobiphenyl (PCB180) were detected in all samples and quantified in jujube, sweet orange and PGI Euphorbia honeys; while polycyclic aromatic hydrocarbons (PAHs), such as chrysene and fluorene, stood out for their higher contents in jujube and sweet orange honeys. Considering plasticizers, all honeys showed an excessive amount of dibutyl phthalate (DBP), when (improperly) considering the relative EU Specific Migration Limit. Furthermore, sweet orange, PGI Euphorbia and G. alypum honeys were characterized by Pb exceeding the EU Maximum Level. Overall, data from this study may encourage Moroccan governmental bodies to strengthen their monitoring activity in beekeeping and to find suitable solutions for implementing more sustainable agricultural practices.

Mutation pattern of cancer suppressor p53 gene in factory workers exposed to polypropylene and impact on their reproductive hormones

BACKGROUND

Polypropylene is a thermoplastic polymer playing the role of an endocrine disruptor that interferes with the union, emission, transport or elimination of normal hormones. Epidemiological information indicated the relation of endocrine-disturbing chemicals with prostate cancer, testis tumor and diminished fertility. p53 is a key tumor silencer gene. The present study aimed to evaluate luteinizing hormone (LH) and follicle-stimulating hormone (FSH) levels and the risk of p53 mutations as a result of exposure to polypropylene in non-tumorous adult male factory workers.

METHODS

In total, 150 (controls = 35, workers = 115) subjects were recruited. Groups were maintained according to the tenure of exposure G1 (1-5 years), G2 (6-10 years), G3 (11-15 years) and G4 (16-20 years). Concentrations of LH and FSH were determined through an enzyme-linked immunosorbent assay. Genotyping analysis was performed by polymerase chain reaction based gel electrophoresis followed by DNA sequencing. The structural and functional impact of the mutation on the p53 structure was evaluated using 50-ns molecular dynamics (MD) simulations and protein-DNA docking.

RESULTS

Mean plasma LH levels were significantly decreased in G1 (p > 0.05) as well as the G2, G3 and G4 (p > 0.001) groups. Similarly, FSH levels were significant decrease in G1 (p > 0.05), G2 (p > 0.01), G3 (p > 0.001) and G4 (p > 0.001) compared to the control group. Sequencing results found three variants i.e. g.13450 T>G, g.13430C>T and g.13737G>A. One of them was predicted to be disease-causing others are polymorphisms. MD simulation of missense mutation R273H showed no structural impact on the protein structure in MD simulation, but it resulted in weaker binding of p53 with the DNA that might lower the gene expression of cell cycle regulatory proteins.

CONCLUSIONS

These findings predict decreased fertility and risk of malignancies in the future. The spectrum of p53 mutations as a result of polypropylene exposure in the Pakistani population has not been investigated before. Further studies and meta-analyses are required to elucidate the role of different plasticizers in reproduction and cancer-causing risk factors in a larger population.

Association between urinary phthalate levels and chronic pain in US adults, 1999-2004: A nationally representative survey

Introduction

Chronic pain is a public health concern throughout the world. Ascertaining and managing its risk factors helps develop well-directed treatment plans and prevention strategies. Phthalates (PAEs) exposure leads to various health problems. The present study aims to explore the potential correlation between urinary PAEs metabolites and chronic pain in adults.

Methods

The study population data were extracted from the National Health and Nutrition Examination Survey (NHANES) conducted from 1999 to 2004 in the United States. Seven urinary PAEs metabolites were used to assess long-term PAEs exposure. The assessment of chronic pain was determined by a self-report questionnaire. Weighted analyses were conducted to consider the complex sampling design. Models were adjusted by demographic data and lifestyle factors. Urinary PAEs metabolites were assessed as both continuous and categorical variables. Tertile 1 was considered as the reference. Stratified analyses were performed by gender and pain site. All data analyses were conducted with STATA, version 15.1. P < 0.05 was considered with statistical significance.

Results

A total of 4,196 participants were considered in our final analysis. Chronic pain prevalence reached 52.19% (n = 2,138) among the participants, with women accounting for a large proportion (57.75% vs. 42.25%). After multivariable logistic regression analysis, a higher prevalence of chronic pain was observed among participants in the third tertile of mono-(2-ethyl)-hexyl phthalate (MEHP) (OR = 1.23, 95% CI = 1.02-1.48, P = 0.034) and mono-benzyl phthalate (MBzP) (OR = 1.28, 95% CI = 1.04-1.58, P = 0.022) in our adjusted model. The logtransformed concentration of MBzP also showed a significant association with chronic pain prevalence (OR = 1.09, 95% CI = 1.01-1.18, P = 0.036) in the adjusted model. In further analysis, the positive correlations of urinary phthalate metabolites with chronic pain remained robust when stratified by gender and chronic pain site.

Conclusions

Our findings presented a positive correlation between urinary PAEs metabolites and chronic pain among adult participants, and more causal research should be conducted to ascertain the interactions between the two and to expound their underlying mechanisms.

Wide substrate range for a candidate bioremediation enzyme isolated from Nocardioides sp. strain SG-4 G

Narrow substrate ranges can impact heavily on the range of applications and hence commercial viability of candidate bioremediation enzymes. Here we show that an ester hydrolase from Nocardioides strain SG-4 G has potential as a bioremediation agent against various pollutants that can be detoxified by hydrolytic cleavage of some carboxylester, carbamate, or amide linkages. Previously we showed that a radiation-killed, freeze-dried preparation (ZimA) of this strain can rapidly degrade the benzimidazole fungicide carbendazim due to the activity of a specific ester hydrolase, MheI. Here, we report that ZimA also has substantial hydrolytic activity against phthalate diesters (dimethyl, dibutyl, and dioctyl phthalate), anilide (propanil and monalide), and carbamate ester (chlorpropham) herbicides under laboratory conditions. The reaction products are substantially less toxic, or inactive as herbicides, than the parent compounds. Tests of strain SG-4 G and Escherichia coli expressing MheI found they were also able to hydrolyse dimethyl phthalate, propanil, and chlorpropham, indicating that MheI is principally responsible for the above activities.

Enzyme catalyzes ester bond synthesis and hydrolysis: The key step for sustainable usage of plastics

Petro-plastic wastes cause serious environmental contamination that require effective solutions. Developing alternatives to petro-plastics and exploring feasible degrading methods are two solving routes. Bio-plastics like polyhydroxyalkanoates (PHAs), polylactic acid (PLA), polycaprolactone (PCL), poly (butylene succinate) (PBS), poly (ethylene furanoate) s (PEFs) and poly (ethylene succinate) (PES) have emerged as promising alternatives. Meanwhile, biodegradation plays important roles in recycling plastics (e.g., bio-plastics PHAs, PLA, PCL, PBS, PEFs and PES) and petro-plastics poly (ethylene terephthalate) (PET) and plasticizers in plastics (e.g., phthalate esters, PAEs). All these bio- and petro-materials show structure similarity by connecting monomers through ester bond. Thus, this review focused on bio-plastics and summarized the sequences and structures of the microbial enzymes catalyzing ester-bond synthesis. Most of these synthetic enzymes belonged to α/β-hydrolases with conserved serine catalytic active site and catalyzed the polymerization of monomers by forming ester bond. For enzymatic plastic degradation, enzymes about PHAs, PBS, PCL, PEFs, PES and PET were discussed, and most of the enzymes also belonged to the α/β hydrolases with a catalytic active residue serine, and nucleophilically attacked the ester bond of substrate to generate the cleavage of plastic backbone. Enzymes hydrolysis of the representative plasticizer PAEs were divided into three types (I, II, and III). Type I enzymes hydrolyzed only one ester-bond of PAEs, type II enzymes catalyzed the ester-bond of mono-ester phthalates, and type III enzymes hydrolyzed di-ester bonds of PAEs. Divergences of catalytic mechanisms among these enzymes were still unclear. This review provided references for producing bio-plastics, and degrading or recycling of bio- and petro-plastics from an enzymatic point of view.

The Influence of Plasticizers and Accelerated Ageing on Biodegradation of PLA under Controlled Composting Conditions

The overall performance of plasticizers on common mechanical and physical properties, as well as on the processability of polylactic acid (PLA) films, is well-explored. However, the influence of plasticizers on biodegradation is still in its infancy. In this study, the influence of natural-based dicarboxylic acid-based ester plasticizers (MC2178 and MC2192), acetyl tributyl citrate (ATBC Citroflex A4), and polyethylene glycol (PEG 400) on the biodegradation of extruded PLA films was evaluated. Furthermore, the influence of accelerated ageing on the performance properties and biodegradation of films was further investigated. The biodegradation of films was determined under controlled thermophilic composting conditions (ISO 14855-1). Apart from respirometry, an evaluation of the degree of disintegration, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM) of film surfaces was conducted. The influence of melt-processing with plasticizers has a significant effect on structural changes. Especially, the degree of crystallinity has been found to be a major factor which affects the biodegradation rate. The lowest biodegradation rates have been evaluated for films plasticized with PEG 400. These lower molecular weight plasticizers enhanced the crystallinity degrees of the PLA phase due to an increase in chain mobility. On the contrary, the highest biodegradation rate was found for films plasticized with MC2192, which has a higher molecular weight and evoked minimal structural changes of the PLA. From the evaluated results, it could also be stated that migration of plasticizers, physical ageing, and chain scission of films prompted by ageing significantly influenced both the mechanical and thermal properties, as well as the biodegradation rate. Therefore, the ageing of parts has to be taken into consideration for the proper evolution of the biodegradation of plasticized PLA and their applications.

From trash to treasure: review on upcycling of fruit and vegetable wastes into starch based bioplastics

Growing public concern toward environmental sustainability is currently motivating a paradigm shift toward designing easily degradable plastics that can replace conventional synthetic plastics. The massive rise in food waste generation has led to an increased burden on landfills, thereby resulting in the higher emission of greenhouse gases. Using this food waste to produce bioplastics will benefit not only the environment but also develop a systematic food waste management system. Moreover, bioplastics are preferred due to the use of biomaterials derived from renewable resources. Furthermore, bioplastics degrade faster than conventional synthetic plastics, which take years to degrade. The biodegradation of bioplastics occurs under normal environmental conditions and disintegrates into carbon dioxide, water, biomass, and inorganic compounds without producing hazardous residues. In this review, we will discuss the synthesis of starch based bioplastics using discarded parts of various fruits and vegetables. Furthermore, we will address the importance of various components in the development of starch based bioplastics, such as fillers, plasticizers, and other additives that are essential in providing the bioplastic with different physio-mechanical properties. Therefore, bioplastic production using food waste will pave the way to achieve systematic waste management and environmental sustainability in the near future.

Effect of Various Plasticizers in Different Concentrations on Physical, Thermal, Mechanical, and Structural Properties of Wheat Starch-Based Films

Biocomposite materials are essential for environmental protection, as they have the ability of substituting synthetic plastic with natural materials. This work investigated how different plasticizers (Glycerol (G), Fructose (F), Sorbitol (S), and Urea (U)) affect the morphological, mechanical, thermal, and physical characteristics of films made of wheat starch at various concentrations (0%, 15%, 25%, and 35%). Plasticizers were added to improve the flexibility and homogeneity of the wheat starch-based bioplastic. Control film exhibited high tensile strength (38.7 MPa) with low elongation (1.9%). However, films plasticized with 35% sorbitol showed the highest elongation, which was 60.7% at break. At 35% of all plasticizers, fructose showed the highest tensile strength, with 7.6 MPa. The addition of different plasticizers shows improvement in water resistance; films plasticized with glycerol had the lowest water absorption at 35% fructose (187.4%) and also showed coherent surfaces. Glycerol, sorbitol, and urea films showed a higher mass loss compared to fructose films. Fructose showed the highest performance after the analysis of the results, with low water absorption, water content, and mass loss and with high mechanical performance at 35% of fructose. SEM images show that the addition of fructose and glycerol improves the surface homogenate, while sorbitol and urea have a less compact structure with large pores.

Reproductive and developmental toxicity following exposure to organophosphate ester flame retardants and plasticizers, triphenyl phosphate and isopropylated phenyl phosphate, in Sprague Dawley rats

Two organophosphate esters used as flame retardants and plasticizers, triphenyl phosphate (TPHP) and isopropylated phenyl phosphate (IPP), have been detected in environmental samples around the world. Human exposure primarily occurs via oral ingestion with reported higher concentrations in children. Currently, there are no data to evaluate potential risk from exposure to either TPHP or IPP during fetal development. These short-term perinatal studies in rats provide preliminary toxicity data for TPHP and IPP, including information on transfer to fetus/offspring and across the pup blood-brain barrier. In separate experiments, TPHP or IPP were administered via dosed feed at concentrations 0, 1000, 3000, 10 000, 15 000, or 30 000 ppm to time-mated Hsd:Sprague Dawley SD rats from gestation day (GD) 6 through postnatal day (PND) 28; offspring were provided dosed feed at the same concentration as their dam (PND 28-PND 56). TPHP- and IPP-related toxicity resulted in removal of both 30 000 ppm groups on GD 12 and 15 000 ppm IPP group after parturition. Body weight and organ weights were impacted with exposure in remaining dams. Reproductive performance was perturbed at ≥10 000 ppm TPHP and all IPP exposure groups. In offspring, both TPHP- and IPP-related toxicity was noted in pups at ≥10 000 ppm as well as reduction in bodyweights, delays in pubertal endpoints, and/or reduced cholinesterase enzyme activity starting at 1000 ppm TPHP or IPP. Preliminary internal dose assessment indicated gestational and lactational transfer following exposure to TPHP or IPP. These findings demonstrate that offspring development is sensitive to 1000 ppm TPHP or IPP exposure.

A Brief Evaluation of Antioxidants, Antistatics, and Plasticizers Additives from Natural Sources for Polymers Formulation

The circular economy plays an important role in the preparation and recycling of polymers. Research groups in different fields, such as materials science, pharmaceutical and engineering, have focused on building sustainable polymers to minimize the release of toxic products. Recent studies focused on the circular economy have suggested developing new polymeric materials based on renewable and sustainable sources, such as using biomass waste to obtain raw materials to prepare new functional bio-additives. This review presents some of the main characteristics of common polymer additives, such as antioxidants, antistatic agents and plasticizers, and recent research in developing bio-alternatives. Examples of these alternatives include the use of polysaccharides from agro-industrial waste streams that can be used as antioxidants, and chitosan which can be used as an antistatic agent.

Thyroid hormone disruption by bis-(2-ethylhexyl) phthalate (DEHP) and bis-(2-ethylhexyl) adipate (DEHA) in Japanese medaka Oryzias latipes

Pollution of water bodies with plasticizers is a serious environmental problem worldwide. In this study, we investigated the effects of plasticizers bis-(2-ethylhexyl) phthalate (DEHP) and bis-(2-ethylhexyl) adipate (DEHA) in Japanese medaka (Oryzias latipes). DEHP significantly increased the expression of all the genes tested: thyroid stimulating hormone beta subunit (tshβ-like), tshβ, deiodinase 1 (dio1), deiodinase 2 (dio2), and thyroid hormone receptor alpha (trα) and beta (trβ). However, DEHA only significantly increased tshβ at 7.4 µg/L but significantly decreased dio2 expression at 25.8, 111.1, and 412.6 4 µg/L, while other genes were not significantly affected. Both chemicals reduced eye size and total body length, but did not affect embryo development, hatching time and rate, and swimming performance. DEHA alone affected swim bladder inflation and not DEHP. This is the first report that not only DEHP but also DEHA disrupt thyroid hormone activity in fish. DEHP contamination (13.2 μg/L) was detected in tap water from Kobe, Japan; thus, tap water itself may disrupt thyroid hormone activity in Japanese medaka. Importantly, the effective concentration of DEHP for thyroid hormone-related gene expression and growth was close to or lower than DEHP concentrations reported in surface water elsewhere, indicating that DEHP contamination is a serious aquatic pollution.

Electrospinning of Microstructures Incorporated with Vitamin B9 for Food Application: Characteristics and Bioactivities

The food industry has been expanding, and new vectors to entrap vitamins have been constantly investigated, aiming at versatile systems with good physico-chemical characteristics, low-cost production, high stability and the efficient release of active ingredients. The vitamin B9 (folic acid or folate) is essential for the healthy functioning of a variety of physiological processes in humans and is beneficial in preventing a range of disorders. In this study, two approaches were developed to encapsulate vitamin B9. Zein and the combination of modified starch with two plasticizers were the selected encapsulating agents to produce microstructures via the electrospinning technique. The objective was to improve the stability and the B9 antioxidant capacity in the final formulations. The work strategy was to avoid limitations such as low bioavailability, stability and thermosensitivity. The microstructures were fabricated and the morphology and shape were assessed by scanning electron microscopy. The B9 release profiles of modified starch and zein microstructures were analyzed in simulated gastric fluid at 37 °C, and in deionized water and ethanol at room temperature. The B9 encapsulation efficiency and the stability of the systems were also studied. The ABTS assay was assessed and the antioxidant activity of the produced microstructures was evaluated. The physico-chemical characterization of loaded B9 in the microstructures was achieved. High encapsulation efficiency values were achieved for the 1% B9 loaded in 12% w/w modified starch film; 5% B9 vitamin encapsulated by the 15% w/w modified starch with 4% w/w tween 80; and 4% w/w glycerol film with heterogeneous microstructures, 5% w/w zein compact film and 10% w/w zein film. In conclusion, the combinations of 7 wt.% of modified starch with 4 wt.% tween 80 and 4 wt.% glycerol; 15 wt.% of modified starch with 4 wt.% tween 80 and 4 wt.% glycerol; and 12 wt.% modified starch and 5 wt.% zein can be used as delivery structures in order to enhance the vitamin B9 antioxidant activity in the food and nutraceutical fields.

Migration of Microplastics and Phthalates from Face Masks to Water

Since the outbreak of COVID-19, face masks have been introduced in the complex strategy of infection prevention and control. Face masks consist of plastic polymers and additives such as phthalates. The aim of this study was to evaluate the migration of microplastics (MP) and phthalates from face masks to water. Four types of masks including FFP2 masks and surgical were studied. Masks were first characterized to determine the different layers and the material used for their fabrication. Then, masks were cut into 20 pieces of 0.5 cm2, including all their layers, placed in water, and the migration of MP and phthalates was evaluated according to the conditions stated in EU Regulation No 10/2011 on plastic materials and articles intended to come into contact with food. For MP, the morphological analysis (shape, dimension, particle count) was performed using a stereomicroscope, while the identification of both masks and MP released was conducted using μ-Fourier-transform infrared spectroscopy (µ-FT-IR). Migration of phthalates was assessed by ultra-high-performance liquid chromatography coupled to triple quadrupole mass spectrometer (UPLC-MS/MS). Face masks analyzed in the present study were made of atactic polypropylene (PP) as stated by the manufacturer. The μ-FT-IR confirmed that PP and polyamide (PA) were released as fragments, while both PP and polyester (PES) were released as fibers. In addition, 4 phthalates were identified at concentrations between 2.34 and 21.0 µg/mask. This study shows that the migration study can be applied to evaluate the potential release of MP and phthalates from face masks to water and could give a hint for the potential impact of their incorrect disposal on the aquatic resources.

Non-Enzymatic Phenylboronic Acid-Based Optode Membrane for Glucose Monitoring in Serums of Diabetic Patients and in the Culture Medium of Human Embryos

Monitoring glucose levels is important not only for diabetics, but also for tracking embryonic development in human embryo culture media. In this study, an optochemical sensor (glucose-selective polymer membrane) was fabricated for the determination of glucose in serum from diabetic patients and the culture media of human embryos. The optode membranes were formulated using polyvinyl chloride (PVC) as the polymer matrix and 4',5'-dibromofluorescein octadecyl ester (ETH 7075) as the chromoionophore. The sensitivity of the optode membranes was optimized using two different plasticizers (tricresyl phosphate-TCP and nitrophenyloctyl ether-NOPE) and three ionophores (nitrophenylboronic acid-NPBA, trifluorophenyboronic acid-TFPBA, 4'-nitrobenzo-15-crown-5) and tested for glucose detection. The best optode membrane was formulated from 49.5% PVC, 49.5% TCP, 1% NPBA, and 1% ETH 7075. It showed a linear dynamic range of 10^-3 M to 10^-1 M, with a detection limit of 9 × 10^-4 M and a response time of 2 min. The detection mechanism involves H-bonding between NPBA and glucose, which was confirmed by Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR). The reaction also involves the formation of boronate esters in basic media with deprotonation of the chromoionophore (ETH 7075), leading to a decrease in UV-Vis absorbance at λmax = 530 nm. The membrane optode was used for glucose determination in synthetic culture medium, commercial embryo culture medium (GLOBAL^® TOTAL^® W/HEPES), and serum from normal and diabetic patients, showing good accuracy and precision of the optode.

Assessing Molecular Docking Tools to Guide the Design of Polymeric Materials Formulations: A Case Study of Canola and Soybean Protein

After more than 40 years of biopolymer development, the current research is still based on conventional laboratory techniques, which require a large number of experiments. Therefore, finding new research methods are required to accelerate and power the future of biopolymeric development. In this study, promising biopolymer-additive ranking was described using an integrated computer-aided molecular design platform. In this perspective, a set of 21 different additives with plant canola and soy proteins were initially examined by predicting the molecular interactions scores and mode of molecule interactions within the binding site using AutoDock Vina, Molecular Operating Environment (MOE), and Molecular Mechanics/Generalized Born Surface Area (MM-GBSA). The findings of the investigated additives highlighted differences in their binding energy, binding sites, pockets, types, and distance of bonds formed that play crucial roles in protein-additive interactions. Therefore, the molecular docking approach can be used to rank the optimal additive among a set of candidates by predicting their binding affinities. Furthermore, specific molecular-level insights behind protein-additives interactions were provided to explain the ranking results. The highlighted results can provide a set of guidelines for the design of high-performance polymeric materials at the molecular level. As a result, we suggest that the implementation of molecular modeling can serve as a fast and straightforward tool in protein-based bioplastics design, where the correct ranking of additives among sets of candidates is often emphasized. Moreover, these approaches may open new ways for the discovery of new additives and serve as a starting point for more in-depth investigations into this area.

Occurrence and Characterization of Small Microplastics (<100 μm), Additives, and Plasticizers in Larvae of Simuliidae

This study is the first to investigate the ingestion of microplastics (MPs), plasticizers, additives, and particles of micro-litter < 100 μm by larvae of Simuliidae (Diptera) in rivers. Blackflies belong to a small cosmopolitan insect family whose larvae are present alongside river courses, often with a torrential regime, up to their mouths. Specimens of two species of blackfly larvae, Simulium equinum and Simulium ornatum, were collected in two rivers in Central Italy, the Mignone and the Treja. Small microplastics (SMPs, <100 μm), plasticizers, additives, and other micro-litter components, e.g., natural and non-plastic synthetic fibers (APFs) ingested by blackfly larvae were, for the first time, quantified and concurrently identified via MicroFTIR. The pretreatment allowed for simultaneous extraction of the ingested SMPs and APFs. Strong acids or strong oxidizing reagents and the application of temperatures well above the glass transition temperature of polyamide 6 and 6.6 (55−60 °C) were not employed to avoid further denaturation/degradation of polymers and underestimating the quantification. Reagent and procedural blanks did not show any SMPs or APFs. The method’s yield was >90%. Differences in the abundances of the SMPs and APFs ingested by the two species under exam were statistically significant. Additives and plasticizers can be specific to a particular polymer; thus, these compounds can be proxies for the presence of plastic polymers in the environment.

Prenatal Exposure to Emerging Plasticizers and Synthetic Antioxidants and Their Potency to Cross Human Placenta

Gestational exposure to environmental chemicals and subsequent permeation through the placental barrier represents potential health risks to both pregnant women and their fetuses. In the present study, we explored prenatal exposure to a suite of 46 emerging plasticizers and synthetic antioxidants (including five transformation products of 2,6-di-tert-butyl-4-hydroxytoluene, BHT) and their potency to cross human placenta based on a total of 109 maternal and cord serum pairs. Most of these chemicals have rarely or never been investigated for prenatal exposure and associated health risks. Eleven of them exhibited detection frequency greater than 50% in maternal blood, including dibutyl fumarate (DBF), 2,6-di-tert-butylphenol (2,4-DtBP), 1,3-diphenylguanidine (DPG), methyl-2-(benzoyl)benzoate (MBB), triethyl citrate (TEC), BHT, and its five metabolites, with a median concentration from 0.05 to 3.1 ng/mL. The transplacental transfer efficiency (TTE) was determined for selected chemicals with valid measurements in more than 10 maternal/cord blood pairs, and the mean TTEs exhibited a large variation (i.e., 0.29-2.14) between chemicals. The determined TTEs for some of the target chemicals were comparable to the predicted values by our previously proposed models developed from molecular descriptors, indicating that their transplacental transfer potency could be largely affected by physicochemical properties and molecular structures. However, additional biological and physiological factors may influence the potency of environmental chemicals to cross human placenta. Overall, our study findings raise concern on human exposure to an increasing list of plastic additives during critical life stages (e.g., pregnancy) and potential health risks.

Simple, One-Pot Method for Preparing Transparent Ethyl Cellulose Films with Good Mechanical Properties

In this research, ethyl cellulose films were prepared by a simple, easy, controlled one-pot method using either ethanol or ethyl lactate as solvents, the films being formed at 6 °C. Titanium dioxide nanoparticles were incorporated to improve the oxygen transmission and water vapour transmission rates of the obtained films. This method used no plasticizers, and flexible materials with good mechanical properties were obtained. The resulting solvent-free and transparent ethyl cellulose films exhibited good mechanical properties and unique free-shapable properties. The obtained materials had similar properties to those reported in the literature, where plasticizers were incorporated into ethyl cellulose films with an elastic modulus of 528 MPa. Contact angles showed the hydrophobic nature of all the prepared materials, with contact angles between 80 and 108°. Micrographs showed the smooth surfaces of the prepared samples and porous intersections with honeycomb-like structures. The oxygen and water vapor transmission rates were the lowest for the ethyl cellulose films prepared in ethyl lactate, these being 615 cm³·m⁻²·day⁻¹ and 7.8 gm⁻²·day⁻¹, respectively, showing that the films have promise for food packaging applications.

Edible Polymers and Secondary Bioactive Compounds for Food Packaging Applications: Antimicrobial, Mechanical, and Gas Barrier Properties

Edible polymers such as polysaccharides, proteins, and lipids are biodegradable and biocompatible materials applied as a thin layer to the surface of food or inside the package. They enhance food quality by prolonging its shelf-life and avoiding the deterioration phenomena caused by oxidation, humidity, and microbial activity. In order to improve the biopolymer performance, antimicrobial agents and plasticizers are also included in the formulation of the main compounds utilized for edible coating packages. Secondary natural compounds (SC) are molecules not essential for growth produced by some plants, fungi, and microorganisms. SC derived from plants and fungi have attracted much attention in the food packaging industry because of their natural antimicrobial and antioxidant activities and their effect on the biofilm’s mechanical properties. The antimicrobial and antioxidant activities inhibit pathogenic microorganism growth and protect food from oxidation. Furthermore, based on the biopolymer and SC used in the formulation, their specific mass ratio, the peculiar physical interaction occurring between their functional groups, and the experimental procedure adopted for edible coating preparation, the final properties as mechanical resistance and gas barrier properties can be opportunely modulated. This review summarizes the investigations on the antimicrobial, mechanical, and barrier properties of the secondary natural compounds employed in edible biopolymer-based systems used for food packaging materials.

Plasticizing effect of Apis mellifera honey on whey protein isolate films

The aims of this study were to analyze the plasticizing effect of Apis mellifera honey on the mechanical, physicochemical and optical properties of whey protein isolate (WPI) films and to compare the results collected with the plasticizing effect of glycerol on WPI-films. Response surface was applied to optimize the amounts of WPI and glycerol in order to obtain films with higher tensile strength (TS), moderate elongation, and lower water vapor permeability so that they could be used as reference films. Honey was added at different concentrations (60%, 80%, and 100%) of g honey/100 g WPI, as a plasticizer to the WPI-films. In comparison to glycerol-plasticized films, an increase in the percentage of honey produced a reduction of 20 ± 10 to 48 ± 0.5% of TS, a 66 ± 0.5% lower in Young's modulus (WPI-films with 100% honey), and an increase of 186 ± 11% in elongation at break in the WPI-films with 100% honey. Honey-plasticized WPI-films were from 29 ± 11 to 43 ± 3% less permeable to water vapor than glycerol-plasticized WPI films. The mechanical characteristics of the 80% honey formulation did not differ significantly from those of the reference film (p > 0.05). Findings from this study indicate that honey has great potential as a plasticizer in WPI-films.

Microbial Consortia and Mixed Plastic Waste: Pangenomic Analysis Reveals Potential for Degradation of Multiple Plastic Types via Previously Identified PET Degrading Bacteria

The global utilization of single-use, non-biodegradable plastics, such as bottles made of polyethylene terephthalate (PET), has contributed to catastrophic levels of plastic pollution. Fortunately, microbial communities are adapting to assimilate plastic waste. Previously, our work showed a full consortium of five bacteria capable of synergistically degrading PET. Using omics approaches, we identified the key genes implicated in PET degradation within the consortium's pangenome and transcriptome. This analysis led to the discovery of a novel PETase, EstB, which has been observed to hydrolyze the oligomer BHET and the polymer PET. Besides the genes implicated in PET degradation, many other biodegradation genes were discovered. Over 200 plastic and plasticizer degradation-related genes were discovered through the Plastic Microbial Biodegradation Database (PMBD). Diverse carbon source utilization was observed by a microbial community-based assay, which, paired with an abundant number of plastic- and plasticizer-degrading enzymes, indicates a promising possibility for mixed plastic degradation. Using RNAseq differential analysis, several genes were predicted to be involved in PET degradation, including aldehyde dehydrogenases and several classes of hydrolases. Active transcription of PET monomer metabolism was also observed, including the generation of polyhydroxyalkanoate (PHA)/polyhydroxybutyrate (PHB) biopolymers. These results present an exciting opportunity for the bio-recycling of mixed plastic waste with upcycling potential.

Multi-Residue Analysis of Chemical Additives in Edible Vegetable Oils Using QuEChERS Extraction Method Followed by Supercritical Fluid Chromatography

Since the quality and safety of food highly depend on its preservation and protection, the use of food packaging materials increases the risk of chemical contamination of the packaged food by migration. Herein, we focused on antioxidants, photoinitiators, UV absorbers and plasticizers which are extensive additives used in food packaging materials. In the present study, a rapid, simple, green and reliable method was developed and validated for the determination of twelve chemical additives in edible vegetable oils using SFC together with a modified QuEChERS procedure. Under the optimum conditions, twelve additives were separated within 10 min, and the consumption of the organic solvent was significantly reduced, which improved the environmentally friendliness. The performance of the developed method was evaluated. Good linearity (r > 0.999) was obtained in the range of 0.20−20.0 µg/mL and 0.50−20.0 µg/mL, respectively. The limits of detection and limits of quantification of the twelve additives in vegetable oils were 0.05−0.15 µg/mL and 0.15−0.50 µg/mL, respectively. Recoveries of all the chemical additives for the spiked samples were between 60.9% and 106.4%, with relative standard deviations (RSD) lower than 9.9%. The results demonstrated that the proposed method was efficient, reliable and robust for the routine analysis of additives in edible vegetable oils and can be an alternative to the multi-residue analysis of chemical additives for other packaged foods.

High-Resolution Mass Spectrometry Screening of Emerging Organophosphate Esters (OPEs) in Wild Fish: Occurrence, Species-Specific Difference, and Tissue-Specific Distribution

There is a dearth of information regarding the pollution status of emerging organophosphate esters (OPEs) in wild fish. Here, we optimized and validated a quick, easy, cheap, effective, rugged, and safe (QuEChERS) pretreatment method, which was further applied for target, suspect, and nontarget screening of OPEs in n = 48 samples of wild fishes from Taihu Lake (eastern China). This integrated technique allows us to fully identify 20 OPEs, and 9 out of them are emerging OPEs detected in wild fish for the first time. Importantly, some of the emerging OPEs, i.e., tris(2,4-di-tert-butylphenyl) phosphate (TDtBPP), 4-tert-butylphenyl diphenyl phosphate (BPDP), and 2-isopropylphenyl diphenyl phosphate (IPDP), exhibited greater or at least comparable contamination levels as compared to traditional ones. There were no statistically significant interspecies (n = 6) differences regarding OPE concentrations. However, we observed significant differences on OPE concentrations among different tissues of silver carp (Hypophthalmichthys molitrix), for which the intestine has the highest OPE mean concentration (46.5 ng/g wet weight (ww)), followed by the liver (20.1 ng/g ww) ≈ brain (20.0 ng/g ww) > gill (14.8 ng/g ww) > muscle (11.4 ng/g ww). An interesting exception is IPDP, which presents an unexpectedly high concentration in the brain (0.510 ng/g ww). Collectively, this study expands our understanding of OPE contamination in wild fish and clearly shows that emerging TDtBPP, IPDP, and BPDP could play an equally important role as traditional OPEs in contribution of OPE pollution in wild fish samples.