Development and characterization of chitosan coated poly-(ɛ-caprolactone) nanoparticulate system for effective immunization against influenza

Animal vaccine revolution: Nanoparticle adjuvants open the future of vaccinology

In recent years, the rapid development of nanoparticle adjuvants has greatly facilitated the treatment and prevention of infectious diseases in humans and animals. The remarkable success of mRNA nanovaccines against SARS-CoV-2 has accelerated the advancement of nanoparticle adjuvant technologies in the era of precision medicine. Significant progress has been made in researching nanovaccines for major animal infectious diseases, such as porcine epidemic diarrhea, avian influenza, porcine reproductive and respiratory syndrome, bovine viral diarrhea, foot-and-mouth disease, African swine fever, and Newcastle disease. This article reviews the nanoparticle adjuvants under investigation for animal use, emphasizing their diverse mechanisms of action and immunological properties, and analyzes the physicochemical factors influencing their immune-enhancing effects. On this basis, we discuss future prospects and key challenges that need to be addressed, aiming to provide valuable references for the development of novel animal vaccine adjuvants.

Biodegradable nanoplatforms for antigen delivery: part I - state of the art review of polymeric nanoparticles for cancer immunotherapy

INTRODUCTION

Polymeric nanoparticles used for antigen delivery against infections and for cancer immunotherapy are an emerging therapeutic strategy in promoting the development of innovative vaccines. Beyond their capability to create targeted delivery systems with controlled release of payloads, biodegradable polymers are utilized for their ability to enhance the immunogenicity and stability of antigens.

AREAS COVERED

This review extensively discusses the physicochemical parameters that affect the behavior of nanoparticles as antigen-delivery systems. Additionally, various types of natural and synthetic polymers and recent advancements in nanoparticle-based targeted vaccine production are reviewed.

EXPERT OPINION

Biodegradable polymeric nanoparticles have gained major interest in the vaccination filed and have been extensively used to encapsulate antigens against a wide variety of tumors. Moreover, their versatility in terms of tunning their physicochemical characteristics, and their surface, facilitates the targeting to antigen presenting cells and enhances immune response.

Chitosan non-particulate vaccine delivery systems

Chitosan is an extensively used polymer for drug delivery applications in particulate and non-particulate carriers. Chitosan-based particulate, nano-, and microparticle, carriers have been the most extensively studied for the delivery of therapeutics and vaccines. However, chitosan has also been used in vaccine applications for its adjuvant properties in various hydrogels or as a carrier coating material. The focus of this review will be on the usage of chitosan as a vaccine adjuvant based on its intrinsic immunogenicity; the various forms of chitosan-based non-particulate delivery systems such as thermosensitive hydrogels, microneedles, and conjugates; and the advantages of its role as a coating material for vaccine carriers.

Preparation and characterization of curdlan-chitosan conjugate nanoparticles as mucosal adjuvants for intranasal influenza H1N1 subunit vaccine

Intranasal vaccination offers crucial protection against influenza virus pandemics. However, antigens, especially subunit antigens, often fail to induce effective immune responses without the help of immune adjuvants. Our research has demonstrated that a polyelectrolyte complex, composed of curdlan sulfate/O-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride (CS/O-HTCC), effectively triggers both mucosal and systemic immune responses when administrated intranasal. In this study, stable nanoparticles formed by curdlan-O-HTCC conjugate (CO NP) were prepared and characterized. Furthermore, the efficacy of CO NP was evaluated as a mucosal adjuvant in an intranasal influenza H1N1 subunit vaccine. The results revealed that CO NP exhibits uniform and spherical morphology, with a size of 190.53 ± 4.22 nm, and notably, it remains stable in PBS at 4 °C for up to 6 weeks. Biological evaluation demonstrated that CO NP stimulates the activation of antigen-presenting cells (APCs), including macrophages and dendritic cells (DCs), both in vitro and in vivo. Furthermore, intranasal administration of CO NP effectively elicits cellular and humoral immune responses, notably enhancing mucosal immunity. Thus, CO NP emerges as a promising mucosal adjuvant for influenza subunit vaccines.

Nanoparticle formulation for the development of a dog nanovaccine against Cystic Echinococcosis

Cystic Echinococcosis is a cosmopolitan zoonosis closely linked to poverty and ignorance. It affects both cattle and humans, causing significant losses to both human and animal health. To date, there is no effective way to combat this. Our proposal focused on the formulation of poly (lactic-co-glycolic acid (PLGA) and Eudragit-RSPO polymeric nanoparticles, which are suitable to encapsulate an antigen for oral administration in dogs. This antigen, named EgFABP1, belonging to the family of fatty acid-binding proteins, was isolated from the larval form of the parasite Echinococcus granulosus. Several reports point to proteins from this family from parasitic flatworms as candidates for a successful vaccine, considering the restricted lipid metabolism of these organisms. The encapsulation of the antigen yielded an efficiency higher than 50 %, and the nanoparticles showed the expected size range. In addition, antigen integrity was conserved and the formulation was resistant to artificial gastric and intestinal fluid effects.

Lung tissue-resident memory T cells: the gatekeeper to respiratory viral (re)-infection

The discovery of lung tissue-resident memory T (TRM) cells and the elucidation of their function in antiviral immunity have inspired considerable efforts to leverage the power of TRM cells, in defense to the infections and reinfections by respiratory viruses. Here, we have reviewed lung TRM cell identification, molecular regulation, and function after influenza and SARS-CoV-2 infections. Furthermore, we have discussed emerging data on TRM responses induced by systemic and mucosal vaccination strategies. We hope that our current outstanding of TRM cells in this review could provide insights toward the development of vaccines capable of inducing highly efficacious mucosal TRM responses for protection against respiratory viral infections.

The evolution of the global COVID-19 epidemic in Morocco and understanding the different therapeutic approaches of chitosan in the control of the pandemic

In 2020, Coronavirus disease (COVID-19), a new viral respiratory disease caused by a virus that belongs to Coronaviridae family, has been identified. It is a very severe flu that negatively affects the functions of the lung and other respiratory organs. COVID-19 virus can be transmitted between people either by touching an infected person or by direct contact with their respiratory droplets. Therefore, the COVID-19 virus has become a global concern due to its rapid spread and severity. Based on the World Health Organization report from 2 March 2020 to 24 October 2022, the total infected cases and deaths in Morocco are around 1,265,389 (3.46%) and 16,280 (0.04%), respectively. Recently, some scientists have found that chitosan, a polymer existed in nature, can inhibit COVID-19 infection and repair damaged tissue. Therefore, understanding chitosan mechanisms in controlling COVID-19, might lead to innovative strategies in the medical field, such as developing drugs against SARS-CoV-2, and replacing vaccines, which have negative side effects. This review aims to show the evolution of the COVID-19 pandemic worldwide, specifically in Morocco, its pathophysiology, and its ability to silence the immune system. This review also provides an overview of the treatments and measures applied to protect human beings and how chitosan acts and controls COVID-19.

Enhancement of Antimicrobial and Dyeing Properties of Cellulosic Fabrics via Chitosan Nanoparticles

The primary goal of this study is to prepare chitosan nanoparticles (CSNPs) by the ionic gelation method via the treatment of chitosan (0.2 wt.%) with tripolyphosphate (0.2 wt.%) ultrasonically for 45 min. FT-IR spectroscopy and TEM images were used to characterize and validate CSNP production. Cellulosic materials with different concentrations of CSNPs have better antibacterial and colouring characteristics. The treated cellulosic fabrics were analyzed by FT-IR spectroscopy, SEM, and thermogravimetric analysis. Colourimetric data measurements expressed in K/S values were used to evaluate the impact of CSNPs on the dyeing affinity of cellulosic materials. In addition, antibacterial activity against bacteria and fungi was tested on the treated cellulosic fabrics. According to the K/S values, cellulosic textiles treated with CSNPs (0.3 wt.%) had a better affinity for acid dyeing. These textiles also offer better antibacterial properties and are more resistant to washing, light, and rubbing. A cytotoxicity study found that CSNPs give cellulosic materials antibacterial and acid dyeing properties, which is good for the environment.

Mucosal vaccine delivery: A focus on the breakthrough of specific barriers

Mucosal vaccines can effectively induce an immune response at the mucosal site and form the first line of defense against microbial invasion. The induced mucosal immunity includes the proliferation of effector T cells and the production of IgG and IgA antibodies, thereby effectively blocking microbial infection and transmission. However, after a long period of development, the transformation of mucosal vaccines into clinical use is still relatively slow. To date, fewer than ten mucosal vaccines have been approved. Only seven mucosal vaccines against coronavirus disease 2019 (COVID-19) are under investigation in clinical trials. A representative vaccine is the adenovirus type-5 vectored COVID-19 vaccine (Ad5-nCoV) developed by Chen and coworkers, which is currently in phase III clinical trials. The reason for the limited progress of mucosal vaccines may be the complicated mucosal barriers. Therefore, this review summarizes the characteristics of mucosal barriers and highlights strategies to overcome these barriers for effective mucosal vaccine delivery.

Intranasal Immunization with Zika Virus Envelope Domain III-Flagellin Fusion Protein Elicits Systemic and Mucosal Immune Responses and Protection against Subcutaneous and Intravaginal Virus Challenges

Zika virus (ZIKV) infections in humans are mainly transmitted by the mosquito vectors, but human-to-human sexual transmission is also another important route. Developing a ZIKV mucosal vaccine that can elicit both systemic and mucosal immune responses is of particular interest. In this study, we constructed a recombinant ZIKV envelope DIII (ZDIII) protein genetically fused with Salmonella typhimurium flagellin (FliC-ZDIII) as a novel mucosal antigen for intranasal immunization. The results indicated that the FliC-ZDIII fusion proteins formulated with E. coli heat-labile enterotoxin B subunit (LTIIb-B5) adjuvant greatly increased the ZDIII-specific IgG, IgA, and neutralizing titers in sera, and the ZDIII-specific IgA titers in bronchoalveolar lavage and vaginal fluids. Protective immunity was further assessed by subcutaneous and intravaginal ZIKV challenges. The second-generation FliCΔD3-2ZDIII was shown to result in a reduced titer of anti-FliC IgG antibodies in sera and still retained the same levels of serum IgG, IgA, and neutralizing antibodies and mucosal IgA antibodies without compromising the vaccine antigenicity. Therefore, intranasal immunization with FliCΔD3-2ZDIII fusion proteins formulated with LTIIb-B5 adjuvant elicited the greatest protective immunity against subcutaneous and intravaginal ZIKV challenges. Our findings indicated that the combination of FliCΔD3-2ZDIII fusion proteins and LTIIb-B5 adjuvant for intranasal immunization can be used for developing ZIKV mucosal vaccines.

Bioengineering Strategies for Developing Vaccines against Respiratory Viral Diseases

Respiratory viral pathogens like influenza and coronaviruses such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) have caused outbreaks leading to millions of deaths. Vaccinations are, to date, the best and most economical way to control such outbreaks and have been highly successful for several pathogens. Currently used vaccines for respiratory viral pathogens are primarily live attenuated or inactivated and can risk reversion to virulence or confer inadequate immunity. The recent trend of using potent biomolecules like DNA, RNA, and protein antigenic components to synthesize vaccines for diseases has shown promising results. Still, it remains challenging to translate due to their high susceptibility to degradation during storage and after delivery. Advances in bioengineering technology for vaccine design have made it possible to control the physicochemical properties of the vaccines for rapid synthesis, heightened antigen presentation, safer formulations, and more robust immunogenicity. Bioengineering techniques and materials have been used to synthesize several potent vaccines, approved or in trials, against coronavirus disease 2019 (COVID-19) and are being explored for influenza, SARS, and Middle East respiratory syndrome (MERS) vaccines as well. Here, we review bioengineering strategies such as the use of polymeric particles, liposomes, and virus-like particles in vaccine development against influenza and coronaviruses and the feasibility of adopting these technologies for clinical use.

Recent Advances and Future Perspectives in Polymer-Based Nanovaccines

Vaccination is the most valuable and cost-effective health measure to prevent and control the spread of infectious diseases. A significant number of infectious diseases and chronic disorders are still not preventable by existing vaccination schemes; therefore, new-generation vaccines are needed. Novel technologies such as nanoparticulate systems and adjuvants can enable safe and effective vaccines for difficult target populations such as newborns, elderly, and the immune-compromised. More recently, polymer-based particles have found application as vaccine platforms and vaccine adjuvants due to their ability to prevent antigen degradation and clearance, coupled with enhanced uptake by professional antigen-presenting cells (APCs). Polymeric nanoparticles have been applied in vaccine delivery, showing significant adjuvant effects as they can easily be taken up by APCs. In other words, polymer-based systems offer a lot of advantages, including versatility and flexibility in the design process, the ability to incorporate a range of immunomodulators/antigens, mimicking infection in different ways, and acting as a depot, thereby persisting long enough to generate adaptive immune responses. The aim of this review is to summarize the properties, the characteristics, the added value, and the limitations of the polymer-based nanovaccines, as well as the process of their development by the pharmaceutical industry.

Nanotechnology-based approaches for emerging and re-emerging viruses: Special emphasis on COVID-19

In recent decades, the major concern of emerging and re-emerging viral diseases has become an increasingly important area of public health concern, and it is of significance to anticipate future pandemic that would inevitably threaten human lives. The novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a newly emerged virus that causes mild to severe pneumonia. Coronavirus disease (COVID-19) became a very much concerned issue worldwide after its super-spread across the globe and emerging viral diseases have not got specific and reliable diagnostic and treatments. As the COVID-19 pandemic brings about a massive life-loss across the globe, there is an unmet need to discover a promising and typically effective diagnosis and treatment to prevent super-spreading and mortality from being decreased or even eliminated. This study was carried out to overview nanotechnology-based diagnostic and treatment approaches for emerging and re-emerging viruses with the current treatment of the disease and shed light on nanotechnology's remarkable potential to provide more effective treatment and prevention to a special focus on recently emerged coronavirus.

Chitin and chitosan as tools to combat COVID-19: A triple approach

The progressive and fatal outbreak of the newly emerged coronavirus, SARS-CoV-2, necessitates rigorous collaboration of all health care systems and researchers from all around the world to bring such a devastating pandemic under control. As there is so far no officially approved drug or ideal vaccine for this disease, investigations on this infectious disease are actively pursued. Chitin and chitosan have shown promising results against viral infections. In this review, we first delve into the problematic consequences of viral pandemics followed by an introduction on SARS-CoV-2 taxonomical classification. Then, we elaborate on the immunology of COVID-19. Common antiviral therapies and their related limitations are described and finally, the potential applicability of chitin and chitosan to fight this overwhelming viral pandemic is addressed.

Chitosan-Based Nanoparticles Against Viral Infections

Viral infections, in addition to damaging host cells, can compromise the host immune system, leading to frequent relapse or long-term persistence. Viruses have the capacity to destroy the host cell while liberating their own RNA or DNA in order to replicate within additional host cells. The viral life cycle makes it challenging to develop anti-viral drugs. Nanotechnology-based approaches have been suggested to deal effectively with viral diseases, and overcome some limitations of anti-viral drugs. Nanotechnology has enabled scientists to overcome the challenges of solubility and toxicity of anti-viral drugs, and can enhance their selectivity towards viruses and virally infected cells, while preserving healthy host cells. Chitosan is a naturally occurring polymer that has been used to construct nanoparticles (NPs), which are biocompatible, biodegradable, less toxic, easy to prepare, and can function as effective drug delivery systems (DDSs). Furthermore, chitosan is Generally Recognized as Safe (GRAS) by the US Food and Drug Administration (U.S. FDA). Chitosan NPs have been used in drug delivery by the oral, ocular, pulmonary, nasal, mucosal, buccal, or vaginal routes. They have also been studied for gene delivery, vaccine delivery, and advanced cancer therapy. Multiple lines of evidence suggest that chitosan NPs could be used as new therapeutic tools against viral infections. In this review we summarize reports concerning the therapeutic potential of chitosan NPs against various viral infections.

Engineered Nanoparticle Applications for Recombinant Influenza Vaccines

Influenza viruses cause seasonal epidemics and represent a pandemic risk. With current vaccine methods struggling to protect populations against emerging strains, there is a demand for a next-generation flu vaccine capable of providing broad protection. Recombinant biotechnology, combined with nanomedicine techniques, could address this demand by increasing immunogenicity and directing immune responses toward conserved antigenic targets on the virus. Various nanoparticle candidates have been tested for use in vaccines, including virus-like particles, protein and carbohydrate nanoconstructs, antigen-carrying lipid particles, and synthetic and inorganic particles modified for antigen presentation. These methods have yielded some promising results, including protection in animal models against antigenically distinct influenza strains, production of antibodies with broad reactivity, and activation of potent T cell responses. Based on the evidence of current research, it is feasible that the next generation of influenza vaccines will combine recombinant antigens with nanoparticle carriers.

In Vivo and In Vitro Assessments of the Antibacterial Potential of Chitosan-Silver Nanocomposite Against Methicillin-Resistant Staphylococcus aureus-Induced Infection in Rats

Methicillin-resistant Staphylococcus aureus (MRSA) is one of the most threatening multidrug-resistant bacteria worldwide. Owing to their efficient antimicrobial properties, nanoparticles have been widely used as an alternative approach for combating the antibiotic-resistant bacteria. Consequently, this study was designed to compare in between the bactericidal effect of low doses (5 mg/kg bwt) of nanoparticles of chitosan (Ch-NPs), silver (Ag-NPs), and chitosan-silver nanocomposites (Ch-Ag NCs) both in vitro and in vivo against experimentally chronic infection induced by methicillin-resistant Staphylococcus aureus (MRSA). The three forms of nanoparticles were tested for their in vitro antimicrobial potential against MRSA by detection of MICs and MBCs using microdilution method. In vivo, thirty-five male albino Wistar rats were used and divided into five groups (n = 7). Group l (negative control), group 2 (MRSA infected and untreated), groups 3, 4, and 5 (MRSA infected then treated with Ch-NPs, Ag-NPs, and Ch-Ag NCs respectively for 7 days). After 6 weeks, blood samples were collected then rats were euthanized to collect different organs (liver, spleen, lungs, and kidneys). Some of them were kept in 10% formalin for histopathological investigations while others used for bacterial re-isolation. Ch-Ag NCs showed the lowest MIC and MBC among the tested nanoparticles. Moreover, the highest histopathological scoring was observed in the infected and untreated group while the lowest scoring was detected in groups treated with Ch-Ag NCs in comparison with the negative control group. The highest bacterial count was noticed in the infected and untreated group followed by those treated with Ch-NPs while the lowest count was observed in group treated with Ch-Ag NCs. Depending on these results, it can be concluded that Ch-Ag NCs have a strong bactericidal effect against MRSA and may be used as alternative option to antibiotics.

Type IIb Heat Labile Enterotoxin B Subunit as a Mucosal Adjuvant to Enhance Protective Immunity against H5N1 Avian Influenza Viruses

Human infections with highly pathogenic avian influenza H5N1 viruses persist as a major global health concern. Vaccination remains the primary protective strategy against H5N1 and other novel avian influenza virus infections. We investigated the use of E. coli type IIb heat labile enterotoxin B subunit (LTIIb-B5) as a mucosal adjuvant for intranasal immunizations with recombinant HA proteins against H5N1 avian influenza viruses. Use of LTIIb-B5 adjuvant elicited more potent IgG, IgA, and neutralizing antibody titers in both sera and bronchoalveolar lavage fluids, thus increasing protection against lethal virus challenges. LTIIb-B5 mucosal adjuvanticity was found to trigger stronger Th17 cellular response in spleen lymphocytes and cervical lymph nodes. Studies of anti-IL-17A monoclonal antibody depletion and IL-17A knockout mice also suggest the contribution from Th17 cellular response to anti-H5N1 protective immunity. Our results indicate a link between improved protection against H5N1 live virus challenges and increased Th17 response due to the use of LTIIb-B5 mucosal adjuvant with HA subunit proteins.

A Review on Chitosan's Uses as Biomaterial: Tissue Engineering, Drug Delivery Systems and Cancer Treatment

Chitosan, derived from chitin, is a biopolymer consisting of arbitrarily distributed β-(1-4)-linked D-glucosamine and N-acetyl-D-glucosamine that exhibits outstanding properties- biocompatibility, biodegradability, non-toxicity, antibacterial activity, the capacity to form films, and chelating of metal ions. Most of these peculiar properties are attributed to the presence of free protonable amino groups along the chitosan backbone, which also gives it solubility in acidic conditions. Moreover, this biopolymer can also be physically modified, thereby presenting a variety of forms to be developed. Consequently, this polysaccharide is used in various fields, such as tissue engineering, drug delivery systems, and cancer treatment. In this sense, this review aims to gather the state-of-the-art concerning this polysaccharide when used as a biomaterial, providing information about its characteristics, chemical modifications, and applications. We present the most relevant and new information about this polysaccharide-based biomaterial's applications in distinct fields and also the ability of chitosan and its various derivatives to selectively permeate through the cancer cell membranes and exhibit anticancer activity, and the possibility of adding several therapeutic metal ions as a strategy to improve the therapeutic potential of this polymer.

Antibacterial Activity of Honey/Chitosan Nanofibers Loaded with Capsaicin and Gold Nanoparticles for Wound Dressing

This paper describes the preparation, characterization, and evaluation of honey/tripolyphosphate (TPP)/chitosan (HTCs) nanofibers loaded with capsaicin derived from the natural extract of hot pepper (Capsicum annuumL.) and loaded with gold nanoparticles (AuNPs) as biocompatible antimicrobial nanofibrous wound bandages in topical skin treatments. The capsaicin and AuNPs were packed within HTCs in HTCs-capsaicin, HTCs-AuNP, and HTCs-AuNPs/capsaicin nanofibrous mats. In vitro antibacterial testing against Pasteurella multocida, Klebsiella rhinoscleromatis,Staphylococcus pyogenes, and Vibrio vulnificus was conducted in comparison with difloxacin and chloramphenicol antibiotics. Cell viability and proliferation of the developed nanofibers were evaluated using an MTT assay. Finally, in vivo study of the wound-closure process was performed on New Zealand white rabbits. The results indicate that HTCs-capsaicin and HTCs-AuNPs are suitable in inhibiting bacterial growth compared with HTCs and HTCs-capsaicin/AuNP nanofibers and antibiotics (P < 0.01). The MTT assay demonstrates that the nanofibrous mats increased cell proliferation compared with the untreated control (P < 0.01). In vivo results show that the developed mats enhanced the wound-closure rate more effectively than the control samples. The novel nanofibrous wound dressings provide a relatively rapid and efficacious wound-healing ability, making the obtained nanofibers promising candidates for the development of improved bandage materials.

Exploring Endolysin-Loaded Alginate-Chitosan Nanoparticles as Future Remedy for Staphylococcal Infections

Endolysins are a novel class of antibacterials with proven efficacy in combating various bacterial infections, in vitro and in vivo. LysMR-5, an endolysin derived from phage MR-5, demonstrated high lytic activity in our laboratory against multidrug-resistant S. aureus (MRSA) and S. epidermidis strains. However, endolysin and proteins in general are associated with instability and short in vivo half-life, consequently limiting their usage as pharmaceutical preparation to treat bacterial infections. Nanoencapsulation of endolysins could help to achieve better therapeutic outcome, by protecting the proteins from degradation, providing sustained release, thus could increase their stability, shelf life, and therapeutic efficacy. Hence, in this study, the feasibility of alginate-chitosan nanoparticles (Alg-Chi NPs) to serve as drug delivery platform for LysMR-5 was evaluated. LysMR-5-loaded nanoparticles were prepared by calcium ion-induced pre-gelation of alginate core and its complexation with chitosan. The formation of nanoparticles was confirmed on the basis of DLS, zeta potential, and electron microscopy imaging. The LysMR-5-loaded nanoparticles presented a hydrodynamic diameter of 276.5 ± 42, a PDI of 0.342 ± 0.02, a zeta potential - 25 mV, and an entrapment efficiency of 62 ± 3.1%. The potential ionic interaction between alginate, chitosan, and LysMR-5 was investigated by FT-IR and SEM-EDX analysis. Using scanning electron microscopy (SEM) and transmission electron microscopy (TEM), nano-sized particles with characteristic morphology were seen. Different antibacterial assays and SDS-PAGE analysis showed no change in endolysin's structural integrity and bioactivity after entrapment. A direct antibacterial effect of blank Alg-Chi Nps, showing enhanced bactericidal activity upon LysMR-5 loading, was observed against S. aureus. At physiological pH (7.2), the release profile of LysMR-5 from Alg-Chi NPs showed a biphasic release and followed a non-Fickian release mechanism. The biocompatible nature as revealed by cytocompatibility and hemocompatibility studies endorsed their use as drug delivery system for in vivo studies. Collectively, these results demonstrate the potential of Alg-Chi NPs as nano-delivery vehicle for endolysin LysMR-5 and other therapeutic proteins for their use in various biomedical applications.

New and old adjuvants in allergen-specific immunotherapy: With a focus on nanoparticles

Allergic diseases have remarkably increased in recent years. Nowadays, efforts for curing and management of these disorders are an important concern worldwide. Allergen-specific immunotherapy (ASIT) has recently gained more attention as a means for the management of allergic diseases. Adjuvants or helper agents are materials applied for better stimulating and shifting of protective responses, and these belong to an extremely diverse collection of complexes. The main function of adjuvants includes acting as depot foundations, transferring vehicles, and immunostimulators. Immunostimulatory adjuvants have gained increasing attention for ASIT. In this regard, the present study provides a review of old and new adjuvants used in allergen immunotherapy.

Cationic Nanostructures for Vaccines Design

Subunit vaccines rely on adjuvants carrying one or a few molecular antigens from the pathogen in order to guarantee an improved immune response. However, to be effective, the vaccine formulation usually consists of several components: an antigen carrier, the antigen, a stimulator of cellular immunity such as a Toll-like Receptors (TLRs) ligand, and a stimulator of humoral response such as an inflammasome activator. Most antigens are negatively charged and combine well with oppositely charged adjuvants. This explains the paramount importance of studying a variety of cationic supramolecular assemblies aiming at the optimal activity in vivo associated with adjuvant simplicity, positive charge, nanometric size, and colloidal stability. In this review, we discuss the use of several antigen/adjuvant cationic combinations. The discussion involves antigen assembled to 1) cationic lipids, 2) cationic polymers, 3) cationic lipid/polymer nanostructures, and 4) cationic polymer/biocompatible polymer nanostructures. Some of these cationic assemblies revealed good yet poorly explored perspectives as general adjuvants for vaccine design.

Use of PELC/CpG Adjuvant for Intranasal Immunization with Recombinant Hemagglutinin to Develop H7N9 Mucosal Vaccine

Human infections with H7N9 avian influenza A virus can result in severe diseases with high mortality. Developing an effective vaccine is urgently needed to prevent its pandemic potential. Vaccine delivery routes via mucosal surfaces are known to elicit mucosal immune responses such as secretory IgA antibodies in mucosal fluids, thus providing first-line protection at infection sites. PEG-b-PLACL (PELC) is a squalene-based oil-in-water emulsion adjuvant system that can enhance antigen penetration and uptake in nasal mucosal layers with enhanced mucin interactions. In this study, intranasal immunizations with recombinant H7 (rH7) proteins with a PELC/CpG adjuvant, as compared to the use of poly (I:C) or bacterial flagellin adjuvant, elicited higher titers of H7-specific IgG, IgA, hemagglutination inhibition, and neutralizing antibodies in sera, and increased numbers of H7-specific IgG- and IgA-antibody secreting cells in the spleen. Both PELC/CpG and poly (I:C) adjuvants at a dose as low as 5 μg HA provided an 80% survival rate against live virus challenges, but a lower degree of PELC/CpG-induced Th17 responses was observed. Therefore, the mucosal delivery of rH7 proteins formulated in a PELC/CpG adjuvant can be used for H7N9 mucosal vaccine development.

Chitosan and chitosan nanoparticles as adjuvant in local Rift Valley Fever inactivated vaccine

The present study aimed to improve the potency of inactivated Rift Valley Fever Virus (RVFV) vaccine using chitosan (CS) or chitosan nanoparticles (CNP) as adjuvants. Chitosan nanoparticles were prepared by ionic gelation method. Rift Valley Fever Virus (RVFV) inactivated antigen was loaded on CS and CNP to form two vaccine formulations, RVFV-chitosan nanoparticles based vaccine (RVFV-CNP) and RVFV chitosan based vaccine (RVFV-CS). Five groups of mice were used in this study, each group was injected with one of the following: phosphate buffer saline (group1 G1), RVFV-CNP (G2), (RVF-CS) (G3), RVFV-Alum based vaccine (RVFV-Alum) (G4) and adjuvant free RVFV inactivated antigen (RVFV-Ag) (G5). The immunization was performed twice with 2 weeks interval. The results showed that, RVFV-CNP vaccine enhanced strongly the phagocytic activity of peritoneal macrophage (PM), neutralization antibodies titer against RVFV and IgG values against RVFV nucleoprotein than other vaccine formulations did. In addition, the RVFV-CNP and RVF-CS vaccines upregulate the gene expression of IL-2, IFN-γ (which promote cell mediated immunity) and IL-4 (which promote humeral immunity), while RVFV-Alum vaccine upregulate the gene expression of IL-4 only. These findings indicated that CS and CNP were comparable to the alum as adjuvant in efficacy but superior to it in inducing cell-mediated immune response and might be a candidate adjuvant for inactivated RVFV vaccine.

Current and New Approaches for Mucosal Vaccine Delivery

Mucosal surfaces are the interface between the host’s internal milieu and the external environment, and they have dual functions, serving as physical barriers to foreign antigens and as accepting sites for vital materials. Mucosal vaccines are more favored to prevent mucosal infections from the portal of entry. Although mucosal vaccination has many advantages, licensed mucosal vaccines are scarce. The most widely studied mucosal routes are oral and intranasal. Licensed oral and intranasal vaccines are composed mostly of whole cell killed or live attenuated microorganisms serving as both delivery systems and built-in adjuvants. Future mucosal vaccines should be made with more purified antigen components, which will be relatively less immunogenic. To induce robust protective immune responses against well-purified vaccine antigens, an effective mucosal delivery system is an essential requisite. Recent developments in biomaterials and nanotechnology have enabled many innovative mucosal vaccine trials. For oral vaccination, the vaccine delivery system should be able to stably carry antigens and adjuvants and resist harsh physicochemical conditions in the stomach and intestinal tract. Besides many nano/microcarrier tools generated by using natural and chemical materials, the development of oral vaccine delivery systems using food materials should be more robustly researched to expand vaccine coverage of gastrointestinal infections in developing countries. For intranasal vaccination, the vaccine delivery system should survive the very active mucociliary clearance mechanisms and prove safety because of the anatomical location of nasal cavity separated by a thin barrier. Future mucosal vaccine carriers, regardless of administration routes, should have certain common characteristics. They should maintain stability in given environments, be mucoadhesive, and have the ability to target specific tissues and cells.

An overview of biodegradable nanomaterials and applications in vaccines

Vaccination is the most cost-effective and sustainable way to prevent and eliminate infectious diseases. Compared with traditional vaccines, novel vaccines have better stability, longer duration and require less antigen usage. In addition, novel vaccines have better immune effects and significantly less toxic side effects. However, both novel vaccines and traditional vaccines require carrier molecules or adjuvants to produce an optimal immune response. There is an increasing demand for vaccine adjuvants and delivery systems that can induce stronger immune response whilst reducing production cost and the dose of vaccine. In recent years, nanotechnology has played an important role in the development of novel vaccine adjuvants and nano-delivery systems. Biodegradable materials have also received a lot of attention in medical science because they have excellent biocompatibility, biodegradability and low toxicity, which can protect antigens from degradation, increase antigen stability and provide slow release; resulting in enhanced immunogenicity. Therefore, biodegradable nanoparticles have attracted much attention in the formulation of vaccines. In this review, we outline some key features of biodegradable nanomaterials in the developing safer and more effective vaccines. The properties, structural characteristics, advantages and disadvantage of the biodegradable nanomaterials will be systematically reviewed. Additionally, applications, research progress and future prospects of biodegradable nanomaterials are discussed. This review will be help in future research work directed at developing biodegradable vaccine adjuvants or delivery carriers.

Comprehensive evaluation of chitosan nanoparticle based phage lysin delivery system; a novel approach to counter S. pneumoniae infections

Cpl-1, an endolysin derived from Cp-1 phage has been found to be effective in a number of in-vitro and in-vivo pneumococcal infection models. However its lower bioavailability under in-vivo conditions limits its applicability as therapeutic agent. In this study, Cpl-1 loaded chitosan nanoparticles were set up in order to develop a novel therapeutic delivery system to counter antibiotic resistant S. pneumoniae infections. Interactions of chitosan and Cpl-1 were studied by in-silico docking analysis. Chitosan nanoparticles and Cpl-1 loaded chitosan nanoparticles were prepared by using ionic gelation method and the process was optimized by varying chitosan:TPP ratio, pH, stirring time, stirring rate and Cpl-1 concentration. Chitosan nanoparticles and Cpl-1 loaded chitosan nanoparticles were characterized to ascertain successful formation of nanoparticles and entrapment of Cpl-1 into nanoparticles. Chitosan nanoparticles and Cpl-1 loaded nanoparticles were also evaluated for nanoparticle yield, entrapment efficiency, in-vitro release, stability, structural integrity of Cpl-1, in-vitro bioassay, swelling studies, in-vitro biodegradation and heamolysis studies. Mucoadhesion behavior of chitosan nanoparticles and Cpl-1 loaded nanoparticles was explored using mucous glycoprotein assay and ex-vivo mucoadhesion assay, both preparations exhibited their mucoadhesive nature. Cellular cytotoxicity and immune stimulation studies revealed biocompatible nature of nanoparticles. The results of this study confirm that chitosan nanoparticles are a promising biocompatible candidate for Cpl-1 delivery with a significant potential to increase bioavailability of enzyme that in turn can increase its in-vivo half life to treat S. pneumoniae infections.

Biodegradable polymers for modern vaccine development

Most traditional vaccines are composed either of a whole pathogen or its parts; these vaccines, however, are not always effective and can even be harmful. As such, additional agents known as adjuvants are necessary to increase vaccine safety and efficacy. This review summarizes the potential of biodegradable materials, including synthetic and natural polymers, for vaccine delivery. These materials are highly biocompatible and have minimal toxicity, and most biomaterial-based vaccines delivering antigens or adjuvants have been shown to improve immune response, compared to formulations consisting of the antigen alone. Therefore, these materials can be applied in modern vaccine development.

Innovative Mucosal Vaccine Formulations Against Influenza A Virus Infections

Despite efforts made to develop efficient preventive strategies, infections with influenza A viruses (IAV) continue to cause serious clinical and economic problems. Current licensed human vaccines are mainly inactivated whole virus particles or split-virion administered via the parenteral route. These vaccines provide incomplete protection against IAV in high-risk groups and are poorly/not effective against the constant antigenic drift/shift occurring in circulating strains. Advances in mucosal vaccinology and in the understanding of the protective anti-influenza immune mechanisms suggest that intranasal immunization is a promising strategy to fight against IAV. To date, human mucosal anti-influenza vaccines consist of live attenuated strains administered intranasally, which elicit higher local humoral and cellular immune responses than conventional parenteral vaccines. However, because of inconsistent protective efficacy and safety concerns regarding the use of live viral strains, new vaccine candidates are urgently needed. To prime and induce potent and long-lived protective immune responses, mucosal vaccine formulations need to ensure the immunoavailability and the immunostimulating capacity of the vaccine antigen(s) at the mucosal surfaces, while being minimally reactogenic/toxic. The purpose of this review is to compile innovative delivery/adjuvant systems tested for intranasal administration of inactivated influenza vaccines, including micro/nanosized particulate carriers such as lipid-based particles, virus-like particles and polymers associated or not with immunopotentiatory molecules including microorganism-derived toxins, Toll-like receptor ligands and cytokines. The capacity of these vaccines to trigger specific mucosal and systemic humoral and cellular responses against IAV and their (cross)-protective potential are considered.

Characterization of immunogenicity of avian influenza antigens encapsulated in PLGA nanoparticles following mucosal and subcutaneous delivery in chickens

Mucosal vaccine delivery systems have paramount importance for the induction of mucosal antibody responses. Two studies were conducted to evaluate immunogenicity of inactivated AIV antigens encapsulated in poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles (NPs). In the first study, seven groups of specific pathogen free (SPF) layer-type chickens were immunized subcutaneously at 7-days of age with different vaccine formulations followed by booster vaccinations two weeks later. Immune responses were profiled by measuring antibody (Ab) responses in sera and lachrymal secretions of vaccinated chickens. The results indicated that inactivated AIV and CpG ODN co-encapsulated in PLGA NPs (2x NanoAI+CpG) produced higher amounts of hemagglutination inhibiting antibodies compared to a group vaccinated with non-adjuvanted AIV encapsulated in PLGA NPs (NanoAI). The tested adjuvanted NPs-based vaccine (2x NanoAI+CpG) resulted in higher IgG responses in the sera and lachrymal secretions at weeks 3, 4 and 5 post-vaccination when immunized subcutaneously. The incorporation of CpG ODN led to an increase in Ab-mediated responses and was found useful to be included both in the prime and booster vaccinations. In the second study, the ability of chitosan and mannan coated PLGA NPs that encapsulated AIV and CpG ODN was evaluated for inducing antibody responses when delivered via nasal and ocular routes in one-week-old SPF layer-type chickens. These PLGA NPs-based and surface modified formulations induced robust AIV-specific antibody responses in sera and lachrymal secretions. Chitosan coated PLGA NPs resulted in the production of large quantities of lachrymal IgA and IgG compared to mannan coated NPs, which also induced detectable amounts of IgA in addition to the induction of IgG in lachrymal secretions. In both mucosal and subcutaneous vaccination approaches, although NPs delivery enhanced Ab-mediated immunity, one booster vaccination was required to generate significant amount of Abs. These results highlight the potential of NPs-based AIV antigens for promoting the induction of both systemic and mucosal immune responses against respiratory pathogens.

Nasal vaccination with r4M2e.HSP70c antigen encapsulated into N-trimethyl chitosan (TMC) nanoparticulate systems: Preparation and immunogenicity in a mouse model

In this study, the potential of N-trimethyl chitosan (TMC) nanoparticles as a carrier system for the nasal delivery of the r4M2e.HSP70c, as an M2e-based universal recombinant influenza virus vaccine candidate, was investigated in mice. The anti-M2e specific cellular and humoral immune responses were assessed and the protective efficacy against a 90% lethal dose (LD90) of influenza A/PR/8/34 (H1N1) in a mice model was evaluated. Our results showed that the intranasal immunization of mice with r4M2e.HSP70c+TMC rather than the control groups, r4M2e+TMC, r4M2e and PBS (Phosphate buffer saline), significantly elevated both longevity and serum level of the total M2e-specific IgG antibody with a significant shift in the IgG2a/IgG1 ratio toward IgG2a, induced a Th1 skewed humoral and cellular immune responses, increased IFN-γ, IgG, and IgA in the bronchoalveolar lavage fluid (BALF), and promoted the proliferation of peripheral blood lymphocytes with lower morbidity and mortality rate against viral challenge. In conclusion, based on evidence to our finding, nasal vaccination with r4M2e.HSP70c antigen encapsulated into N-Trimethyl Chitosan (TMC) nanoparticulate system showed to induce a long lasting M2e-specific humoral and cellular immune responses and also provided full protection against a 90% lethal dose (LD90) of the influenza virus A/PR/8/34 (H1N1). It seems, protective immunity following intranasal administration of r4M2e could be resulted by the cooperation of both adjuvants, TMC and HSP70c.

The Inclusion of Chitosan in Poly-ε-caprolactone Nanoparticles: Impact on the Delivery System Characteristics and on the Adsorbed Ovalbumin Secondary Structure

This report extensively explores the benefits of including chitosan into poly-ε-caprolactone (PCL) nanoparticles (NPs) to obtain an improved protein/antigen delivery system. Blend NPs (PCL/chitosan NPs) showed improved protein adsorption efficacy (84%) in low shear stress and aqueous environment, suggesting that a synergistic effect between PCL hydrophobic nature and the positive charges of chitosan present at the particle surface was responsible for protein interaction. Additionally, thermal analysis suggested the blend NPs were more stable than the isolated polymers and cytotoxicity assays in a primary cell culture revealed chitosan inclusion in PCL NPs reduced the toxicity of the delivery system. A quantitative 6-month stability study showed that the inclusion of chitosan in PCL NPs did not induce a change in adsorbed ovalbumin (OVA) secondary structure characterized by the increase in the unordered conformation (random coil), as it was observed for OVA adsorbed to chitosan NPs. Additionally, the slight conformational changes occurred, are not expected to compromise ovalbumin secondary structure and activity, during a 6-month storage even at high temperatures (45°C). In simulated biological fluids, PCL/chitosan NPs showed an advantageous release profile for oral delivery. Overall, the combination of PCL and chitosan characteristics provide PCL/chitosan NPs valuable features particularly important to the development of vaccines for developing countries, where it is difficult to ensure cold chain transportation and non-parenteral formulations would be preferred.

Chitosan-based zinc oxide nanoparticle for enhanced anticancer effect in cervical cancer: A physicochemical and biological perspective

In this study, chitosan-assembled zinc oxide nanoparticle (CZNP) was successfully prepared for evaluated for its anticancer efficacy against cervical cancer cells. The CZNP particles were nanosized and spherical in shape. The zinc oxide nanoparticle (ZNP) and CZNP showed significant cytotoxicity in cervical cancer cells in a concentration-dependent manner. Results showed that the enhanced cytotoxicity was mainly attributed to the reactive oxygen species (ROS) generation in the cancer cells. The apoptosis assay further revealed that apoptosis was the main reason behind the cell killing effect of the zinc oxide nanoparticles. The apoptosis was further confirmed by the nuclear chromatin assay. Live dead assay showed increased red fluorescent cell for CZNP treated cancer cells. Overall, metal oxide present in nanoparticulate dimensions will be advantageous in imparting the cytotoxicity to cervical cancer cell.

Modulating the immune system through nanotechnology

Nowadays, nanotechnology-based modulation of the immune system is presented as a cutting-edge strategy, which may lead to significant improvements in the treatment of severe diseases. In particular, efforts have been focused on the development of nanotechnology-based vaccines, which could be used for immunization or generation of tolerance. In this review, we highlight how different immune responses can be elicited by tuning nanosystems properties. In addition, we discuss specific formulation approaches designed for the development of anti-infectious and anti-autoimmune vaccines, as well as those intended to prevent the formation of antibodies against biologicals.

Nanogel-based nasal vaccines for infectious and lifestyle-related diseases

Because the mucosa is the major entry route for most pathogens, the development of mucosal vaccines is a rational approach for protecting against these undesired agents. Mucosal administration of vaccine antigen is useful for non-infectious chronic diseases as well, because of its advantages over injection routes, including comparable efficacy in the induction of systemic immune responses, less pain, and no risk of adverse events at the injection site. However, because it is difficult to effectively induce and regulate antigen-specific mucosal and systemic immune responses when antigen alone is mucosally administered, an appropriate form of mucosal delivery vehicle must be used. Antigen delivery systems involving nanogels, which act as artificial chaperones and mucosal adhesives, are a promising approach to overcoming this problem. Here, we introduce current perspectives regarding the development of nanogel-based nasal vaccines for both infectious and lifestyle-related diseases.

Poly-ϵ-caprolactone/chitosan nanoparticles provide strong adjuvant effect for hepatitis B antigen

Aim: This work aims to investigate the adjuvant effect of poly-ϵ-caprolactone/chitosan nanoparticles (NPs) for hepatitis B surface antigen (HBsAg) and the plasmid DNA encoding HBsAg (pRC/CMV-HBs). Methods: Both antigens were adsorbed onto preformed NPs. Vaccination studies were performed in C57BL/6 mice. Transfection efficiency was investigated in A549 cell line. Results: HBsAg-adsorbed NPs generated strong anti-HBsAg IgG titers, mainly of IgG1 isotype, and induced antigen-specific IFN-γ and IL-17 secretion by spleen cells. The addition of pRC/CMV-HBs to the HBsAg-adsorbed NPs inhibited IL-17 secretion but had minor effect on IFN-γ levels. Lastly, pRC/CMV-HBs-loaded NPs generated a weak serum antibody response. Conclusion: Poly-ϵ-caprolactone/chitosan NPs provide a strong humoral adjuvant effect for HBsAg and induce a Th1/Th17-mediated cellular immune responses worth explore for hepatitis B virus vaccination.

Nasal nanovaccines

Nasal administration of vaccines is convenient for the potential stimulation of mucosal and systemic immune protection. Moreover the easy accessibility of the intranasal route renders it optimal for pandemic vaccination. Nanoparticles have been identified as ideal delivery systems and adjuvants for vaccine application. Heterogeneous protocols have been used for animal studies. This complicates the understanding of the formulation influence on the immune response and the comparison of the different nanoparticles approaches developed. Moreover anatomical and immunological differences between rodents and humans provide an additional hurdle in the rational development of nasal nanovaccines. This review will give a comprehensive expertise of the state of the art in nasal nanovaccines in animals and humans focusing on the nanomaterial used.

Nasal vaccination with poly(β-amino ester)-poly(d,l-lactide-co-glycolide) hybrid nanoparticles

Mucosal vaccination stimulates both mucosal and systemic immunity. However, mucosal applications of vaccine antigens in their free form generally result in poor systemic immune responses and need adjuvantation. In this study, bovine serum albumin loaded, new hybridised poly(β-amino ester)-poly(d,l-lactide-co-glycolide) nanoparticles were prepared by double emulsion-solvent evaporation method, characterised and evaluated in vivo as nasal vaccine carriers. Cationic spherical particles with a mean size of 240nm, good physical stability and high encapsulation efficiency were obtained. Protein structure was not affected throughout preparation and minimal toxicity was shown in Calu-3 and A549 cells. Nasal vaccination with these nanoparticles revealed markedly higher humoral immune responses compared with free antigen following intranasal and subcutaneous immunisation. Mucosal immune response was also stimulated and cytokine titres indicated that Th1 and Th2 pathways were successfully activated. This study shows that the formulated hybrid nanoparticles can be a promising carrier for nasal immunisation of poor antigenic proteins.

Recent developments in nanocarrier-aided mucosal vaccination

To date, most of the licensed vaccines for mucosal delivery are based on live-attenuated viruses which carry the risk of regaining their pathogenicity. Therefore, the development of efficient nonviral vectors allowing the induction of potent humoral and cell-mediated immunity is regarded as an imperative scientific challenge as well as a commercial breakthrough for the pharma industries. For a successful translation to the clinic, such nanocarriers should protect the antigens from mucosal enzymes, facilitate antigen uptake by microfold cells and allow the copresentation of robust, safe for human use, mucosal adjuvants to antigen-presenting cells. Finally, the developed formulations should exhibit accuracy regarding the administered dose, a major drawback of mucosal vaccines in comparison with parenteral ones.

Potential of Translationally Controlled Tumor Protein-Derived Protein Transduction Domains as Antigen Carriers for Nasal Vaccine Delivery

Nasal vaccination offers a promising alternative to intramuscular (i.m.) vaccination because it can induce both mucosal and systemic immunity. However, its major drawback is poor absorption of large antigens in the nasal epithelium. Protein transduction domains (PTDs), also called cell-penetrating peptides, have been proposed as vehicles for nasal delivery of therapeutic peptides and proteins. Here, we evaluated the potential of a mutant PTD derived from translationally controlled tumor protein (designated TCTP-PTD 13) as an antigen carrier for nasal vaccines. We first compared the l- and d-forms of TCTP-PTD 13 isomers (l- or d-TCTP-PTD 13) as antigen carriers. Studies in mice demonstrated that nasally administered mixtures of the model antigen ovalbumin (OVA) and d-TCTP-PTD 13 induced higher plasma IgG titers and secretory IgA levels in nasal washes than nasally administered OVA alone, OVA/l-TCTP-PTD 13, or i.m.-injected OVA. Plasma IgG subclass responses (IgG1 and IgG2a) of mice nasally administered OVA/d-TCTP-PTD 13 showed that the predominant IgG subclass was IgG1, indicating a Th2-biased immune response. We also used synthetic CpG oligonucleotides (CpG) as a Th1 immune response-inducing adjuvant. Nasally administered CpG plus OVA/d-TCTP-PTD 13 was superior in eliciting systemic and mucosal immune responses compared to those induced by nasally administered OVA/d-TCTP-PTD 13. Furthermore, the OVA/CpG/d-TCTP-PTD 13 combination skewed IgG1 and IgG2a profiles of humoral immune responses toward a Th1 profile. These findings suggest that TCTP-derived PTD is a suitable vehicle to efficiently carry antigens and to induce more powerful antigen-specific immune responses and a more balanced Th1/Th2 response when combined with a DNA adjuvant.

Effect of Experimental Parameters on Alginate/Chitosan Microparticles for BCG Encapsulation

The aim of the present study was to develop novel Mycobacterium bovis bacille Calmette-Guérin (BCG)-loaded polymeric microparticles with optimized particle surface characteristics and biocompatibility, so that whole live attenuated bacteria could be further used for pre-exposure vaccination against Mycobacterium tuberculosis by the intranasal route. BCG was encapsulated in chitosan and alginate microparticles through three different polyionic complexation methods by high speed stirring. For comparison purposes, similar formulations were prepared with high shear homogenization and sonication. Additional optimization studies were conducted with polymers of different quality specifications in a wide range of pH values, and with three different cryoprotectors. Particle morphology, size distribution, encapsulation efficiency, surface charge, physicochemical properties and biocompatibility were assessed. Particles exhibited a micrometer size and a spherical morphology. Chitosan addition to BCG shifted the bacilli surface charge from negative zeta potential values to strongly positive ones. Chitosan of low molecular weight produced particle suspensions of lower size distribution and higher stability, allowing efficient BCG encapsulation and biocompatibility. Particle formulation consistency was improved when the availability of functional groups from alginate and chitosan was close to stoichiometric proportion. Thus, the herein described microparticulate system constitutes a promising strategy to deliver BCG vaccine by the intranasal route.

Intranasal hydroxypropyl-β-cyclodextrin-adjuvanted influenza vaccine protects against sub-heterologous virus infection

Intranasal vaccination with inactivated influenza viral antigens is an attractive and valid alternative to currently available influenza (flu) vaccines; many of which seem to need efficient and safe adjuvant, however. In this study, we examined whether hydroxypropyl-β-cyclodextrin (HP-β-CD), a widely used pharmaceutical excipient to improve solubility and drug delivery, can act as a mucosal adjuvant for intranasal flu vaccines. We found that intranasal immunization of mice with hemagglutinin split- as well as inactivated whole-virion influenza vaccine with HP-β-CD resulted in secretion of antigen-specific IgA and IgGs in the airway mucosa and the serum as well. As a result, both HP-β-CD adjuvanted-flu intranasal vaccine protected mice against lethal challenge with influenza virus, equivalent to those induced by experimental cholera toxin-adjuvanted ones. Of note, intranasal use of HP-β-CD as an adjuvant induced significantly lower antigen-specific IgE responses than that induced by aluminum salt adjuvant. These results suggest that HP-β-CD may be a potent mucosal adjuvant for seasonal and pandemic influenza vaccine.

Immune response elicited by an intranasally delivered HBsAg low-dose adsorbed to poly-ε-caprolactone based nanoparticles

Among new strategies to increase hepatitis B virus (HBV) vaccination, especially in developing countries, the development of self-administered vaccines is considered one of the most valuable. Nasal vaccination using polymeric nanoparticles (NPs) constitutes a valid approach to this issue. In detail, poly-ε-caprolactone (PCL)/chitosan NPs present advantages as a mucosal vaccine delivery system: the high resistance of PCL against degradation in biological fluids and the mucoadhesive and immunostimulatory properties of chitosan. In vitro studies revealed these NPs were retained in a mucus-secreting pulmonary epithelial cell line and were capable of entering into differentiated epithelial cells. The intranasal (IN) administration of 3 different doses of HBsAg (1.5 μg, 5 μg and 10 μg) adsorbed on a fixed amount of PCL/chitosan NPs (1614 μg) generated identical titers of serum anti-HBsAg IgG and anti-HBsAg sIgA in mice nasal secretions. Besides other factors, the NP surface characteristics, particularly, zeta potential differences among the administered formulations are believed to be implicated in the outcome of the immune response generated.

Self-Assembling Monomeric Nucleoside Molecular Nanoparticles Loaded with 5-FU Enhancing Therapeutic Efficacy against Oral Cancer

Conventional oligonucleotide based drug delivery systems suffer from lengthy synthetic protocols, high cost, and poor chemical or enzymatic stability under certain circumstances. Canonical free individual nucleosides cannot form stable nanostructures in aqueous solution as drug vehicles. Here, we report the development of a monomeric self-assembled nucleoside nanoparticle (SNNP) into an efficient drug delivery system which has currently no parallel in such field. This was achieved using a l-configurational pyrimido[4,5-d]pyrimidine nucleoside building block that can form robust discrete nanoparticles in just one step with water as the sole solvent. Its high biocompatibility and low toxicity was demonstrated in vitro and in vivo. In mouse xenograft model of oral squamous cell carcinoma (OSCC), SNNP loaded with 5-fluoro-uracile (5-FU-SNNP) remarkably retarded the tumor growth compared with free 5-FU, albeit SNNP alone showed no antitumor effect. The stability in blood circulation and the effective concentration of 5-FU in tumor tissue were increased upon the loading with SNNP. TUNEL and immunohistochemistry analyses further indicated that the superior in vivo antitumor efficacy of 5-FU-SNNP compared to free 5-FU was associated with an enhanced degree of inhibition of cell proliferation and stimulation of cell apoptosis. Furthermore, SNNP alleviated the toxic side effects of 5-FU. These findings suggested that when loaded with SNNP, 5-FU has better antitumor efficacy and lower side effects, indicating that SNNP can efficiently act as a readily accessible, robust, biocompatible and low-toxic nanobiomaterial which may find wide therapeutic applications clinically in the future.